"No valid material component found" when Routing upload using LSMW RCPTRA02

I want to upload routings through LSMW RCPTRA02 incluing routing headers, sequences, operations and component allocations. But systems appears error CM 101 "No valid material component found" . Does anybody occurs the same error before?
The materials truly exists in BOM component.
Sincerely thanks,
Alina

Hi,
What is the status of the BOM? There should not be any problem if the material BOM exists.
Regards,
Krishnendu.

Similar Messages

Update the material quantity in the sales order using LSMW...

Hi Guru's,
I created one sales order using BAPI..now i wanted update the material quantity in the sales order using LSMW...
could you please provide the step by step process....
if anyone of you provide the program logic similar to requirement that would be helpfull to me...
thanks in advance
Srinivas....

Hi Sri,
Hope it may help you.
First do the recording for VA02 transaction, in that give the existing sales order number
and update the Quantity and save it. Remaining steps are same what we used(LSMW) to upload data to applications.
Regards,
Vishvesh
if helpful, rewards it.

Problem in material master upload using LSMW

Dear All
I am trying to upload material master using LSMW (batch input recording).
I am facing problem while doing 14 step (Run Batch Input Session). When i'm running the batch input session, on the Create Material (Initial Screen), system picks values for material code, industry sector & material type but gives error message "select at least one view". system is not allowing me select the views which i selected while recording. system allows me to select all the view which i don't want.
why system is asking me to select the views and also how to select the required view?
thanks
manoj gupta

thanks charu
do i need to do complete LSMW steps fpr all the view separately? if i do LSMW for basic view1, for other view do i need to go for change TCode or create T Code?
thanks
manoj gupta

Material Classification Upload using LSMW

Hi SAP Experts,
We are thinking of using LSMW as a means to upload our material master data for the classification view. How is this done?
Can we use LSMW to upload materials with many class assignments with multiple characteristics?
Ex. Material A is assigned to class X and class Y. Class X has characteristics 1, 2, and 3. Class Y has characteristics 4, 5, and 6.
Would appreciate a swift response.
Thanks in advance!

Hi All,
If it is the existing material you need to modify the Classification type. It can be done by BDC. If you instruct the ABAP team they will make it & give. I am not sure about modifying classification type using LSMW. If you need to create a new material master data with classification using LSMW i will give the steps.
Check out this link for LSMW Steps:
www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Reward if useful.
pherasath

What is the standard program for Material Master upload using LSMW

Dear All
I am trying to use the MM upload using DATMIG_INF4. I want to know what are the different standard projects that are used for Material master upload.

Hi Amol,
You can load the material master using direct input method in LSMW ,details of which are as follows:
Object               0020   Material master
Method               0000
Program name         RMDATIND
Program type         D   Direct input
Please revert back in case of any doubt.
Cheers
VJ

Time Machine Restore and now says Scanner not found - when trying to use

the printers.
Had a faulty harddrive -(per the apple store - this after replacing the screen and logic board...) - so they installed a new one - I restored from my time machine backup - and then went to use my HP 1315 Scanner. Didn't work - get error - scanner not found - even though I can print to the device.
So - I uninstalled and reinstalled the printer in the system preferences - but get same error - so instead I uninstalled all the HP apps and reinstalled them (a pain because HP doesn't make 10.5 software yet).
Still same issue - Scanner not found.
I was using this same scanner prior to the hard drive freeze. HP posts a notice that if you really want the hp software to work you should downgrade to Tiger, install, then reupgrade - but that seems like a lot of hassle to get a scanner to work.
Does anyone have another suggestion?

Thanks Barry -
I wish Profile allowed to list all of my computers and all of My OS systems - but it doesn't - so I'm forced to post each and every time whatever OS is causing whatever issue I'm having.
I have deleted and reinstalled several times to no avail. I do get an error on install that the HPIOX cannot launch...
I am a bit frustrated - this is the 5'th device an Apple upgrade has cost me...
All my belkin devices for my iphone don't work with the new iphone (they altered a pin configuration for the power)
The 1,000 upgraded car kit for Mercedes that I bought just a month ago -- worked great with Iphone 2g - doesn't charge the 3g
Leopard has killed my scanning capabilities...
It wouldn't be such a hard pill to swallow except I keep seeing that ad where the japanese girl comes by and the Mac guy starts talking japanese and the tag line "it just works" -
No - in fact - it doesn't.
My camera only shares pictures with the mac - movies require a 3 way translation
My printer will print - but not scan
My Mercedes car kit will play music - but not charge
All of these things worked with Tiger and Iphone 2g - seems to me like either Apple is trying to force profitability of its partners by forcing consumers to constantly upgrade to new equipment - or - they just don't give a s_t ----

Merchandise category & hierarchy upload using LSMW???

Hi
I am trying to upload Merchandise category and hierarcy using LSMW (BAPI/IDOC method only).
For merhcandise category
I used message type W_WGRP and it is helping me in changing or reclassification of articles. But I am not able to create new merchandise category with this. I used structure E1BPE1WGR01 with "function" field with value "005, LSMW is working fine idocs are created successfully but no new Merc Cat is created.
When I used same structure with "function" field with value "009" I get error message "Class XXX does not exist or or is not valid on this date".
For Merchandise Catrgory Hierarchy
I used idoc CLSMAS but getting error message "Keyword missing for class XXX"
has anybody uploded entire hierarchy structure using LSMW ?

Sorry to say, but your problem is not resolved.
In IS-Retail, a merchandise category must first be created as a class (CLSMAS) and then also as a merchandise category (W_WGRP). Yes, you must process two IDoc per merchandise category, and in that order.
To understand how to load data using LSMW, the best approach to watch what the system does naturally. In this case, use T-Code WGSE to send the merchandise category hierarchy via ALE from one system-client to another. For understanding, you needn't configure the entire ALE scenario, just the outbound portion. Then watch the outbound IDocs be created; there's your example!
For merchandise category hierarchy (including merchandise categories), there are four message types that will be sent: W_WGRP, CHRMAS, CLFMAS, and CLSMAS.
IDoc Serialization using message types (serialization groups) is used when several different message types are dependent on each other, as is the case here. For example, if a merchandise category is assigned to a merchandise category hierarchy level, the merchandise category hierarchy level must first exist. How you use LSMW and IDocs is informed by the sequence.
To understand the IDoc sequence for creating the merchandise category hierarchy (including merchandise categories), use T-Code BD44 to view the Serialization Group GRP_W_WGRP includes the 4 desired message types in sequence:
CHRMAS04 Distr. of Characteristics with Dependencies and Long Texts
CLFMAS02 Master object classification
CLSMAS04 Classes with Long Texts, Document Links, and E1UPSLINK
W_WGRP01 Distribution of material groups
CHRMAS04 is only relevant of Characteristics are being assigned to merchandise categories. Let us leave Characteristics aside for now.
Step 1: Create Merchandise Category Hierarchy Nodes
Step 2: Merchandise Categories - Create as a Class
Step 3: Merchandise Categories - Change as a Retail MC
Step 4: Merchandise Categories - Assign Category Hierarchy Nodes each other, and assign MC class to MCH node.
For this, use these messages:
Step 1: CLSMAS04
Step 2: CLSMAS04
Step 3: W_WGRP01
Step 4: CLFMAS02
- Paul
Paul R. Gendreau, Jr.
SAP Retail

Profit Center upload using LSMW

Hello,
I have created a LSMW project for profit center upload using the BAPI methodology, BUS0015(Profit center)/CREATE(method)
PROFITCENTER_CREATE(message type)
PROFITCENTER_CREATE01(basic type)
The Idoc inbound seeting are set as follows :
File port              DX_PORT_00
Partn.Type             US
Partner no.            LSMW_PAR00
Message Type           PROFITCENTER_CREATE
Process code           BAPI
When I run the data file in, the Idocs are created successfully in status 53, but I do not see the actual profit center when I go to KE53. We are on ECC 5.0
Thanks in advance.

Dear all,
We are on ECC 6.0 and trying using the same configuration for loading profit center.
Unfortunately, we received error message in the step of IDoc generation and we found that the message type and basic type got truncated as 'PROFIT' and 'PROFITCE' respectively. But we could still see the correct info at the step of 'Display converted data' which is a step just before generation.
Have you guys had the same problem previously? Do you know what went wrong?
Cheers,
Ivan

Upload using LSMW

hi,
I have custom table(ie ztable). It has only only column material.
I have a local file containing only material numbers. I want to upload these material into my custom table using Direct Input method.
While doing this when i am selecting the first radio button of LSMW transaction i.e Maintain object attributes, there is one field with label object and method. when i am using f4 there i am not getting my custom table name??.

Hi Praveen,
If you are planning to use LSMW to populate Z-tables, then we need to create a Direct Input program for this. You will have to maintain entries in Data Transfer tables for the F4 to work.
Also since it is just one table, you could write a simple program which will read the file and insert into the z-table.
Thanks..
Preetham S

Reg : Routing creation using LSMW

Hi Experts,
I am trying to post routing details using the LSMW. when I am creating it manually it is going fine. But in the LSMW it is throwing an error saying 'Group canot be assigned to the material and plant'.
Could any of you provide me a solution for this.
Regards,
Ramkishore.

If your structure assingment is correct. Then problem is not with the LSMW.
I think this is due to the test data that you are using it.
Could you please try to create routing manually by using your full set data, i think you face this error.
Please check with the functional consultant, he can answer the error.
Thanks,

Infotype mass upload using LSMW

Hi Experts,
I want to update HR info types using LSMW in mass.
Infotypes needs to be selected dynamically depending upon action type and action reason.
Can any one pls guide me which method to use in LSMW.
With regards,
Chandrasekhar.C

Although you wish LSMW works thats way..it doesnt. As you know LSMW is nothing but a mere a recording, you will have to have 1 recording each for each action type.
you practically have to perform that each action once, record it and then use it to upload data for that action type.
so record separately every action for which you want. and coming to infotypes, dynamically picking is nothing but configuring you Infogroup (V_T588D) for that specific action. This anyway you have to configure to run actions from pa40.
so when you are performing LSMW recording of PA40 , and select you action, the infogroup will run you through all the infotypes configured in that infogroup of that action.
i hope it answers ur query..else revert back.

HR data upload using LSMW

Hi All
I am using LSMW to upload the HR master data. The infotype data that is loaded include the basic infotypes like 0000, 0001, 0002, 0007, 0014 and 0019 (monitoring of tasks). I am using recording method. I can record all infotypes till 0014 in single shot and the recording gets saved at the end of 0014 and gets back to LSMW step. I need 0019 infotype recording also. For this what should I do? How should I record it? Can I record this individually and attach to the above recording? Please help.
Thanks
Shakir

Hi,
What we do during data convertion is creating each recording separately. I don't think the customer will provide you one data file with all ITs information. Providing he/she has to extract data from his/her system it is likely that you get separeted files. Pelase ensure it won't be this way.
Moreover this approach is less error-prone. Image that you are missing some configuration for one of the infotype, which is in the middle (lets say 4th in the row out of 10). Everything would load correctly till it reaches this "unlucky" infotype. Then the record has status of not loaded. The rest would be skipped and you have missing data. Now you need to start reloading from this wrong infotype to the end. But how about these already loaded? Would you delete the records to avoid duplicating?
That's why I am really encouraging you to take each IT separately approach. It is better to spend some time preparing data files then loosing your nerves when investingating what's in and what's not yet in the system, in case an error occurs.
Regards
Marcin

GL Balance upload using LSMW (BAPI bus6035)

Hello everyone,
We are uploading GL balances from legacy to SAP using the LSMW Bapi
object - bus6035
method - post
message type - ACC_DOCUMENT
Basic type - ACC_DOCUMENT03
When we run the lsmw, idoc is created, however with an error 51 saying
"Function module not allowed - APPL_IDOC_INPUT1'
The partner no. is the logical system (the system on which the lsmw is executed)
In the partner profile, we have defined this as LS. In the inbound parameters, we have defined message type = ACC_DOCUMENT, the process code is APL1 and the corresponding function module is - APPL_IDOC_INPUT1
Please let me know if we are missing something or doing anything wrong ?
Since the data in the LSMW will be read frmo a file on the presentation server, do we need to have a port configuration for the same ?
Thanks,
Sushil Joshi

Hi Sameer,
Have a look at these threads, they might help you
Chart of Accounts Upload
Problem: LSMW with transaction FS00 create account (BI is not generated)
Thanks
Janani
award points if helpful

Tables used in MM Master Data Upload using LSMW or BDC?

Hi,
Can anyone provide me with the following information about uploading MM Master Data using LSMW or BDC :-
1. What and all tables are used for uploading Material Master, Vendor Master, Info Record, Open PO, Open PR, RFQ, Open Contracts/Agreements ?
2. What problems are faced during Data Upload ?
3. What error appears/encouontered during upload ?
4. What is the diffrence b/w LSMW and BDC ? Both can be used for Data upload so, what differences are b/w them ?
5. Any other thing to remember/know during Data Upload ?
Thanks,
Lucky

Hi Lucky,
Dont get angry by seeing my response.
See each and every question posted by u is available , in this forum,
u need to do just a search on individual post.
see what ever ur posted, u r definetly got the solutions through others,
remember most of these answers are fetching by this threads itself (60-70%)
a few solutions are there that are given by own,
so better to search first, in the forum , if not satisfied with the solutions then .........
Just its an friendly talk
and Reward points for helpful answers
Thanks
Naveen khan

How to have dynamic number of items uploaded using LSMW

Hello Experts,
I have a requirement where i need to upload the data for quality notifications. One Quality notification can have any number of items. i.e. One Quality notification can have 3 items and the other can have 2.
I have got an excel sheet containing data for 1000 notifications. I need to upload it using LSMW - BDC Recording method.
My question is that if i record the process for 2 items in a Notification, the BDC will always process only 2 items for every notification. How to make this processing dynamic so that any number of items can be uploaded.
Please help.
Thanks a lot in advance.
Regards,
Himanshu

hi
according to me, once a recording is being done for some fields, you can not add fields to it. To add fields after recording, do a new recording, where give values to all fields. Ofcourse, for mandatory fields you ought to give values, other than that for optional fields, give some stsandard or common value. So that you can update it next time when you need it after recording is being done.
Regards
Vinodh

"No valid material component found" when Routing upload using LSMW RCPTRA02

Similar Messages

Maybe you are looking for