No valid routing can be found

Dear All,
After running MRP for a material(REM activated), I am getting the planned orders but without detailed scheduling tab.
When i select scheduling ,I am getting the error no valid routing can be found.
But in CA23,I am finding the rate routing for the material. can anybody tell me how to solve this issue..
karthick

Dear,
Message No MD425? and exception message 62?
In material master check the selection production version in MRP4 view.
lots size validity and status of your production version and routing assign to it.
Go to CA22 -ExtraConsistency check.
Then please refer my reply from these threads,
Scheduling: Master data inconsistent
procurment type
Regards,
R.Brahmankar

Similar Messages

Can't open PDF. Program does not have valid digital signature. No valid Acrobat S/N found.

I recently bought new HP computer with Windows 7. I loaded my Adobe Creative Suite 2 Premium. Illustrator tries to open then just disappears. I can not open PDF's. Get the following message: This program doesn't have valid digital signature that verifies it's signature. No valid Acrobat S/N found. Acrobat will now quit. Then: There is a problem with Adobe Acrobat/Reader. Please exit and try again. When I exit - computer locks up.

These can be frustrating.
Try restarting your PC.
Using a different browser.
There have been reports that this can be due to router problems.
A simple way round it is to get a friend to download the installer for your and put it on a USB stick.

The target element was not found, so all intermediate elements were ignored. As a result, an incorrect element that matches the target element's search properties can be found. Verify that all intermediate elements in Query Id have valid and unique search

Hi All,
I am using CUIT to write automated UI test cases. I have a dialog containing few edit control and buttons.
While running the test it is able to click the button.
However I am getting few warnings as below.
The target element "Technology Name: 'MSAA';Search Configuration: 'VisibleOnly'; Search Properties - ControlType : 'Button',Name : 'OK'" was not found, so all intermediate elements were ignored. As a result, an incorrect element that matches the target
element's search properties can be found. Verify that all intermediate elements in Query Id have valid and unique search properties.
Technology Name: 'MSAA'
Search Configuration: 'VisibleOnly'
Search Properties -
ControlType : 'Button'
Name : 'OK'
Mouse button : 'Left'
I need to resolve these warning. Can anybody suggest me how to resolve these warnings.

Hi sanjay_t,
From these warning message as you provide, I doubt that maybe the button control did not be found successfully by the searchproperties when you playback the Coded UI test.
So I suggest you can try to use DrawHighlight Method to check if the button control
is found before you perform actions on the button target control.
(2)I suggest you can try to use
FindMatchingControls Method on the button control to check if there are more than one control which matches the specified searchproperties and filterproperties.
In addition, as you said that you are using CUIT to write automated UI test. it means that you record the UI action by handing code, am I right?
If yes, I suggest that you can create a simple coded UI test through recording actions using Coded UI Test Builder. Then
generate the code and then try to playback. If playback succeeds, then cross check the properties from UIMap.Designer.cs file. You can reference the code about entering values in the text edit in the UIMap.Designer.cs file to write
your own code.
For more information about how to find a control for coded UI test, I suggest you can refer the following blog.
http://blogs.msdn.com/b/balagans/archive/2009/12/28/9941582.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't solve "valid signing identity not found" issue

Hello,
I'm having a lot of trouble getting an app to build properly. I'm using the Corona SDK, but I believe that my true problem lies here:
It says, "Valid signing identity not found."
I've gone through the process of uninstalling all of my Provisioning Profiles and reinstalling them numerous times but still haven't solved this issue. Any advice would be greatly appreciated.
Cheers,
- Bret

Hi etresoft,
Thanks so much for taking the time to reply to my question. I am under the assumption that my build issue has something to do with the "Valid signing identity not found." message that appears in the XCode Provisioning Profiles window. In all probability, this is causing my build issue, and it seems like a Provisioning / Keychain issue and not necessarily a Corona SDK issue. I did contact Corona anyhow and I'm waiting for a reply.
If there's any chance you can help me debug the "Valid signing identity not found", I would be very grateful!
Cheers,
- Bret

The data source "....." referenced in the form template is not valid or cannot be found

Greetings,
I have an InfoPath 2013 form that uses an external data connection. The data connection became corrupt (somehow, no one knows who changed what). A user went in to InfoPath designer and created a new data connection and changed all references
to use that new data connection. Now the form cannot be published at all with the error
"The data source "GetUserProfileByName" referenced in the form template is not valid or cannot be found"
The new data source they created is GetUserProfileByName2 and changed all references.
Of course, since it is broke, they asked me to see if I can find the issue. I went through the form looking to see if they missed any references to the old data connection and can't find anything.
Where is InfoPath storing the old data connection information and where can I remote it? I looked in the manifest and don't see it there either.
Any thoughts?
Thank you!

Hi Bob,
There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
Please make sure that all the references are updated in the manifest file.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

I*sqlplus: Internal error (no valid library could be found)

Hello
I have installed Oracle 8.1.7 on Windows NT
and Oracle 8.1.7 on Sun Sparc Solaris.
On Windows NT, I have installed i*sqlplus.
However, when connecting from browser
in the index file
I've given a valid username/password of
a database in Oracle 8.1.7 on Sun Sparc
and a connect string to the database
on Oracle 8.1.7 on Sun Sparc.
This connect string is created using
Net 8 assistant and this connect string
is on the Windows NT with Oracle 8.1.7.
However, instead of connecting I
am getting the error
Internal error : (no valid library could be found)
Can you please help me?
Thanks

Cyril,
Can you connect to the database using the command line version of SQL*Plus? If so, you're using the correct syntax.
It sounds like iSQL*Plus is not set up correctly. Do you have the necessary 8.1.7 components on the NT machine (Oracle HTTP Server, Net8, SQL*Plus)?
Review the installation documentation, and/or post more specific information on your set up.
Alison
iSQL*Plus Team

Planned Order Scheduling - No Valid Routing Selected

Hi Friends,
I am trying to create planned order and then trigger lead time scheduling for it.
I have maintained BOM, Routing, Production Version, and Scheduling Parameters for Planned Order as Detailed Scheduling with Scheduling Horizon as 50 days, and gactivated scheduling anf enerate capacity requirements in OPU5.
My Production Version is valid through 12/31/9999 and also validity in terms of order qty is correct.
I face problem of routing not being selected beyond the 70 days horizon.
I could not understand why the scheduling horizon considered is 70 days tough i have maintained 50 as scheduling horizon in OPU5.
Waiting for your valuable help and pointers
Regards,
Mayur

Dear Maulik and Dhaval,
Good morning, Hope you remember me.
In my material master I have 28 days as inhouse production time but even aftre changing it to 0 there is not change in the leadtime scheduling result. I still get the message that no valid routing found.
Dhaval,
For the selection ID routing status matches. My problem is, If my Planned Order has a basic start date on or before 30-Apr-2009 when I try to schedule order it successfully fetches routing but when i give basic start date as 1-May-2009 it results in message no valid routing found.
I though it might be because i have maintained detailed scheduling horizon as 50 days but 30-Apr-2009 is 70 days from now, so I am confused where to check for. My material even do not use production shceduling profile.
Thanks for replying.
Looking to see some clue
Mayur...

None of your trusted wireless networks can be found

Hello there,
We just bought a brand new 20" iMac 2.0 GHz Intel Core Duo last night, and we are having temporary Airport problems with it. We have updated the machine to 10.4.7, have run every single update in Software Update including the newest security updates, and have run the iMac SMC firmware update. So we are totally up to date on everything.
But we think we have discovered a bug in how quickly Apple's Airport software locates PROTECTED wireless networks.
We have a wireless router from Comcast, and we are wirelessly surfing the Internet just fine! Our wireless router works, and we're having no problems surfing the Internet. We have a 128-bit WEP security key enabled on our wireless network.
HOWEVER, 100% of the time without fail, we are having TEMPORARY Airport connection problems whenever we:
1. Wake up the machine from sleep.
or
2. Restart the machine.
or
3. Turn on the machine after it has been shut down.
Whenever we do one of these 3 things, we get an error message that says, "None of your trusted wireless networks can be found. Would you like to join the open wireless network 'linksys' instead?" ("Linksys" is our neighbor's unprotected wireless network.)
If we quickly click on the Airport menu at the top of the screen right when this message comes up, we can see that OUR OWN wireless network is NOT listed underneath the Airport menu at the top of the screen.
BUT -- by the time we answer NO to the above question, when we go back to click on the Airport menu at the top of the screen, sure enough our own network is now listed there! It is there, after about a 5-second delay. So we choose the name of our own wireless network from the Airport menu, and then we're connected just fine! It doesn't prompt us for our password or anything, b/c our password is already stored in our keychain.
So there seems to be something like a 5-10 second delay before the Airport software can see protected wireless networks, like our own.
But it's driving us crazy b/c we have to go through this little song & dance routine every single time. Is there any sort of a fix or a workaround for this that anybody knows of?
We've already been inside our Network system preferences and have chosen "Preferred Networks" instead of "Automatic", and have made sure that our network is at the top of the list (in fact, it's the only one listed there right now). Yet still, the problem remains.
Any ideas?
Thanks!
Scott
20" iMac 2.0 GHz Intel Core Duo Mac OS X (10.4.7)

A couple more thoughts. Have you checked with the maker of the router to see if there is a firmware update that the router might be needing? (usually can be found at maker's online support)
WPA2 is a much better encryption method than WEP - check and see if you can set up the router's encryption method as WPA2. Refer to this other thread
Cannot connect with WEP Encryption
I notice you mentioned this problem exists when you "Wake up the machine from sleep." I'm not sure it will help, but I have my iMacs set - at System Preferences>Energy Saver>Sleep uncheck the box "Put the hard disk(s) to sleep when possible" as that does you no real good to have it checked, and noticeable delays can occur due to that setting.
This final suggestion will not make a difference to your connection issue, but check System Profiler on its "Hardware Overview" to see if it shows:
Boot ROM Version: IM41.0055.B03
If not, there is a system firmware update, Firmware Update 1.0.1, available here [the SMC Firmware Update was included in Software Updates, so you undoubtedly already have it installed]:
http://docs.info.apple.com/article.html?artnum=303903
For further important info about this system firmware update, check out my Aug 24 2:21AM post in this other thread:
http://discussions.apple.com/thread.jspa?messageID=2976656&#2976656

Rcv_transactions_interface - No header record can be found from RHI

We had a receiving transaction fail because of a deadlock. I have tried setting the status of both the interface record and the interface header record to PENDING and re-submitting the interface manager however it still fails with the error:
No header record can be found from RHI. A header is required for this transaction (transaction_type = RECEIVE)
Anybody maybe shed some light on how you can re-submit a failed job through the interface?
I confess I haven't been on Metalink (sorry, My Oracle Support) because... it isn't working.

Please see these docs.
Receiving:Data Discrepancies, Errors and Validation Issues after upgrade to or install of 11.5.10 (or 11i.SCM_PF.J) [ID 371314.1]
Receiving Transactions Fail Intermittently:RCV_ROI_HEADER_MISSING [ID 392969.1]
Thanks,
Hussein

No valid acrobat serial number found?

I have reinstalled my CS2 with Acrobat Pro & after a disc crash where I had to replace the hard drive.
After I reinstalled it on the new hard drive,using the correct serial on the box, it keeps coming up with the above message.
"no valid acrobat serial number found. Acrobat will now quit".
I have tried reinstalling 3 times with no luck.
Can anyone guide me through how to fix this?

It is certainly going to increase your difficulties. Windows 7 was not released at the time when Acrobat 8 was available. You can find the system requirements at http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-produ cts.html#main_System_requirements_for_Acrobat_8_Pro. Most certainly you will be unable to generate PDF files using the Adobe PDF printer.

CK11N: Wrong Error Msg CK 229 (No routing could be found)

Hi
When I am running cost estimate for a material which is sub-contracted outside, system is giving error msg CK 229 that "NO Routing Could be found"... Since, this material is sub-contracted, it won't have any
routing
In OPR4_CK, CK 229 is defined as a error msg...
But earlier, we have released std cost estimates for many such sub- contracted materials and system never used to give us this msg
If I change CK 229 to warning, it will be problem because for Internally manufactured materials routing is MUST and system will just give a warning msg if no routing is found....
What we are expecting is the behaviour as before.. i.e. for sub- contracted materials, message CK 229 should not be issued as error msg.. But for non-sub contracted materials, it should be error msg
Regards
Ajay

Dear Ajay,
1.First ensure that sub-contracted material has got a valid sub-contracting info record maintained
through ME11 against a vendor.The sub-contracting charges will be maintyaine here.
2.Ensure the source list is maintained for material and vendor combination through ME01.
3.Ensure the costing variant used in CK11N has the proper priorities maintained for it,say for Eg PPC1
is used,check in OKKN for this costing variant it has proper priority say first may be for planned
price,second may be based on value in purchase info record.
4.Generally for a sub-contracted material the system sometimes shows error message as no souce list
exists,but routing will be created only for an In-house manufactured products with the procurement type
E.For a sub-conracted material check the procurement type is E and special procurement value is 30 in
MRP2 view of the material master.
Check and revert back.
Regards
Mangalraj.S

Just bought a new Macbook Air (and a new to Mac) and having trouble connecting to home hub. Hub can be found yet when I enter my password, I receive the message "timed out". Can anyone help me?

Just bought a new Macbook Air (and a new to Mac) and having trouble connecting to home hub. Hub can be found yet when I enter my password, I receive the message "timed out". Can anyone help me?
G

Go into your router's page and disable password protection and try connecting again.

HT201335 can`t found the icon of airplay on IOS X

i can`t see the icon of the airplay mirroring in safari or documents or upper bar. just in itunes. also in display setting i can`t found the icon i update the apple tv and the mac ios, i reset all devices including the routing .what can i do ?

osx is mac
ios is iphone and ipad there is no iosx
http://support.apple.com/kb/ht5404
are the requirement the guide to how and the macs which support airplay mirror
if yours do not qualify you need to try looking at
airparrot

Where can I found detailed Doc for chipObject and iBus object

Hello,
Can somebody told me where can I find the document for the chipObject and iBus, I am program for the E series daqcard which contain the tSTC, tESTC class. Do NI has document of these object.

The only documentation for the E series cards in the MH DDK consists of the E series RLP manual and the STC Technical Reference manual. There is no separate documentation for the ChipObject for the E series or the STC.
There is general documentation for the MH DDK and the WinCE PocketPC examples.
I have attached a few files included with
the MH DDK which provide a bit more information on the ChipObjects and iBus.
Christian L
NI Consulting Services
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense
Attachments:
How_To_Make_an_iBus.html ‏5 KB
How_to_use_a_ChipObject.html ‏8 KB
Ex_Arch.png ‏46 KB

TMG Traffic For a Specific IP isn't leaving the server despite valid routes and no firewall

Hi,
I'm struggling to troubleshoot a TMG networking issue:
I have a TMG server setup in my DMZ. Inbound traffic hits the a 3rd party firewall router, goes to the TMG server and is then routed back through the 3rd party firewall router to my internal network. I've setup web publishing rules and listeners for IIS
sites and SMTP traffic using a different IP to listen for 2 different websites and another IP for SMTP.
The issue I have is that my TMG server can't ping a server on the internal network on a specific IP:
TMG can ping 192.168.11.190
TMG cannot ping 192.168.11.191
Firewall rules are configured to permit traffic (no deny connections are shown in the monitor).
tracert and pings to 192.168.11.190 hit the internal IP of the 3rd party router
tracert to 192.168.11.191 simply responds with * * * * before timing out
Monitoring from within TMG shows the correct IP is being used in both cases (internal NIC 192.168.10.10).
A route print from TMG has a valid route to the internal network:
(network)192.168.11.128 (mask) 255.255.255.128 (gateway) 192.168.10.126
In summary:
- TMG can ping 192.168.11.190, but not 192.168.11.191
- Valid routes exists
- No firewall rules are blocking communication
- Traffic to 192.168.11.191 doesn't seem to be leaving the TMG server
Any advice on solving this would be appreciated.
Cheers

It can have many reasons, but it appears to me you are having a routing issue. I can't say for sure, because I don't have the entire IP Addressing sheme. I assume you have used separate subnets for the External DMZ and Internal DMZ.
Have you configured the 192.168.11.128/25 subnet as a correct 'Address' range 192.168.11.128 - 192.168.11.255 on the 'Internal' interface within TMG?
Boudewijn Plomp | BPMi Infrastructure & Security
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember, if you see a post that helped you please click "Vote as Helpful", and if it answered your question, please click "Mark as Answer".

No valid routing can be found

Similar Messages

Maybe you are looking for