No valid source of supply found for material ABC plant Plant1
Hi ,
I am using the Tcode kkf7 (product cost collector ) for costing a material XYZ(finished prod) , it throughts an error that the material ABC which is an sub assembly of XYZ of type E has no valid source of supply.
Regards,
Reddy
hi
you have to maintain purchase info records for subcontracting material, TCODE Me11, procurement type in material master F, special procurement type 30.
In the costing variant assigned check valuation variant strategy for subcontracting
krishna
Similar Messages
-
Error 1706 No valid source could be found for adobe reader x
Error 1706 No valid source could be found for productAdobe reader X (10.1.4) Install cannot continue.
On programs that need adobe reader, the page will not come up.
I tried to restoring my system to a point before when adobe was working, and tried to reinstall adobe reader.
the download stops at 80% and reports: cannot find file AdbeRdr1010_en_us(1).msiRemove your current installed Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and run the full installer from http://get.adobe.com/reader/enterprise/ -
I just bought a new Scanjet G4050 and when I try to install the software I get an error message and the software will not install. Error message is:"Error 1706.No valid source could be found for product ScannerCopy. The Windows Installer cannot continue." During the install, I was prompted to enter a CD or other location to load ScannerCopy.
I had an older version of this same Scanjet G4050 working on my PC about a year ago. My PC is running Vista 64.
Any ideas how I can get the software to successfully load? Any ideas of where I can get this "ScannerCopy" that the software is asking for?Remove your current installed Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and run the full installer from http://get.adobe.com/reader/enterprise/ -
No valid source of supply could be found
Dear SAP Gurus,
In the costing run, we foundout the error for the material XXXX as "No valid source of supply could be found". Please suggest
Checked up in the purchasing data everything is definedDear,
Message no CK380 or CK776 No valid source of supply could be found.
The error does not occur, if The source list contains 2 valid entries for 2 vendors
either the source list or the quota arrangement has been maintained.
one of the two entries is removed in the source list or in the quota arrangement.
Or check Purchase Info-record need to create with Subcontract Category.
Regards,
R.Brahmankar -
No valid source of supply could be found - while running the cost estimate
Hi all,
We are running the material cost estimate for a subcontracting material. The costing is giving an error saying "No valid source of supply could be found".
We have checked
1. Purchase info record
2. Source list
3. Valid dates are maintained for the condition records for the info record.
Still we are getting the error.
Can somebody help on this ?
Thanks in advance
Regards
Karpagam SrinivasanDear Karpagam,
Please check these points,
Are you sure you have created a Purchase Info Record in ME11 for a Sub-contratcing process?
Sometimes you would have crated a standard Purchase Info Record.
Maintain procurement type as F and special procurement value 30 in the MRP2 view of the material
master for that material.
As you have mentioned PIR,Source list already exists,please check this and come back.
Regards
Mangalraj.S -
Error 'No valid source context supplied' for getEntity / getEntitySet call
Hi All
we have configured our ECC system with IW_BEP and Gateway as standalone system. We have developed the Gateway Services using SEGW in backend ECC system and have registered these services on Gateway system.
However when we are executing getEntity or getEntitySet methods in Browser or Gateway Client, the call is failing with error message 'No valid source context supplied.'
I checked the error log for this issue and it says Deserialization of XML failed via transformation ''. Can you guys suggest what could be the issue with this error? Is this due to in-correct configuration? In our Gateway system, we have created System-Alias for ECC system with both check-boxes for Local GW & For Local App as unticked. The RFC destination underlying this System alias is working fine.
Please help me on this.
Regards,
Deepak SalokheHello Deepak,
OK thanks for sharing the info regarding Key.
Can u try checking why its failing in method /IWBEP/CL_MGW_REMOTE_HANDLER-->REQUEST_PROCESS ?
Only way is to debug Deepak. Since error is not specific we nned to debug in these kind of cases and try to know y its failing. This might help and we may get some info which will help fixing things.
This problem is only happening for this particular service ? or its happening for all the services ?
Check this first. If its happening for rest of the services then problem is something else with the GW/BE components only. If not then its service specific.
Can u try regenerating objects again and check ?
Regards,
Ashwin -
C2 223 A valid bill of material could not be found for material 5089
Hi Experts
I have Production orders that use a phantom material 63955 with Std costing control. This material uses three materials (5089,5233 & 5235) of moving average control.
Material 63955 is a HALB and uses all the numbers 5089,5233 and 5235 which are ROH.
With costing material 63955 with CK11N or CK40N, the error is
C2223 A valid bill of material could not be found for material 5089 and the same for 5233 and 5235
Diagnosis
Material 5233 is marked as a phantom assembly. When the system tried to explode a valid bill of material for material 5233, it could not find one.
System Response
The system generates a normal reservation for 5233.
Procedure
Check the bill of material for material 5233
The 5* numbers do not have a bill of material and are purchased externally.
What must I do now please? These materials cannot be costed.
Kind regards
DawnHi..
You check whether material 5233 have procurement type ‘E’ or ‘X’ and
special procurement type ‘50’ in MRP2 view of Material master.
Material 5233 with the above conditions is Phantom assembly.
If Material 5233 is material master for external purchasing, Material 5233
should have procurement type ‘F’ and special procurement type space. -
A valid bill of material could not be found for material
Hi,
Our's is SAP release 605. While doing sales order cost estimate (CK51N) we are getting following error message:
A valid bill of material could not be found for material 1000000012
Message no. C2223
Diagnosis
Material 1000000012 is marked as a phantom assembly. When the system tried to explode a valid bill of material for material 1000000012, it could not find one.
System Response
The system generates a normal reservation for 1000000012.
Procedure
Check the bill of material for material 1000000012.
We have checked BOM and everything seems correct. please suggest where I am doing mistake.
Regards,
BijayDear Bijay kumar,
Material 1000000012 is marked as a phantom assembly,so it must be set with a procurement Type E and special procurement
type 50 in the MRP2 view of the material master or else at BOM level.So as a standard behaviour the system is expecting a
BOM for the phantom assembly 1000000012.Check in T.Code CS03 whether you are able to find the BOM components for this
material 1000000012.If BOM is not found means you have to create a BOM for this pahantom assembly because during the GI
for the main assembly/product the system consumes the components of the pahantom assembly and not the phantom assembly
(as in general there wont be any stock maintained for this material 1000000012).
So check with this and revert back.
Regards
Mangalraj.S -
While running the cost : No valid source of supply could be found
Hi Friends,
When we have doing the ck11n i got the this error meassge.
No valid source of supply could be found , could u please give me clarification where i can fix this issue.
Regards
Mastan Reddy NDear,
F means Externally Procured Item, so system will not allow you to create Cost Estimate.
Please change it to E and then create Cost Estimate, it will work.
Br,Vivek -
Costing Run Error: No Valid Source of Supply
Hi Experts,
I am new to Costing,
While executing Costing Run for a matrial ABC in plant XXX with a Costing Run 111, I get an error No valid source of supply could be found
but when I run the Costing Run for Same material for sam plant with different Costing Run It gets executed properly.
I have read the thread related to it where it is giving reference to note 713111, 499699 and 422926 but there is no check for Source List in Material master.
Regards,
Rajdeep Rane.
Edited by: Rajdeep Rane on Jul 24, 2008 1:30 PMRajdeep
Use OKKN as Jigar says.
Select the costing variant that you are using and then click on "valuation variant"
Look at the tab for subcontract - this will show what the costing variant is useing to creat cost estimates with.
Your options for subcontracting are:
2 Effective Price from Quotation Without Fixed Costs
3 Net Quotation Price
4 Gross Quotation Price
5 Effective Price from Quotation
6 Effective Price from Purchase Order Without Fixed Costs
7 Net Purchase Order Price
8 Gross Purchase Order Price
9 Effective Price from Purchase Order
If your material has a Special Procuremnet key 30 - then one of these strategies has to be used. -
Create Deep Entity - Error "No valid source context supplied".
<?xml version="1.0" encoding="utf-8" ?>
- <error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<code>CX_XSLT_RUNTIME_ERROR/EE1D984A671BED4AAD4D1BD10D509C75</code>
<message xml:lang="en">No valid source context supplied</message>
- <innererror>
<transactionid>7795A2E3D43AF1FCB4BA42F2E933967A</transactionid>
<errordetails />
</innererror>
</error>
Inner error message : " Deserialization of XML failed via transformation ''
_______________________________________XML FILE _________________________________________________
<?xml version="1.0" encoding="UTF-8"?>
<atom:entry
xmlns:atom="http://www.w3.org/2005/Atom"
xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices"
xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<atom:content type="application/xml">
<m:properties>
<d:ParentQuestGuid>42F2E933967A1EE3A6C5C06CE7D414BA</d:ParentQuestGuid>
<d:ExternalID>CORRECATE_V08</d:ExternalID>
<d:Planstartdate>2014-01-31T00:00:00</d:Planstartdate>
<d:FinalDate>2014-02-28T00:00:00</d:FinalDate>
<d:Actualfinishtime>PT00H00M00S</d:Actualfinishtime>
</m:properties>
</atom:content>
<atom:link
rel="http://schemas.microsoft.com/ado/2007/08/dataservices/related/zpartners"
type="application/atom+xml;type=feed"
title="Z_V02_AUDIT_SRV.zcorrecact_2_partner">
<m:inline>
<atom:feed>
<atom:entry>
<atom:content type="application/xml">
<m:properties>
<d:REF_GUID m:null="true" />
<d:PARENT_GUID m:null="true" />
<d:EXTERNAL_ID m:null="true" />
<d:Role_Sortnr>1</d:Role_Sortnr>
<d:Role>52</d:Role>
<d:Partner_Role>BUP003</d:Partner_Role>
<d:PARTNER_GUID m:null="true" />
<d:Responsible_Name>102</d:Responsible_Name>
<d:SYUNAME m:null="true" />
<d:ROLE_TEXT m:null="true" />
<d:RESPONSIBLE_TEXT m:null="true" />
<d:LANGU_ISO m:null="true" />
</m:properties>
</atom:content>
</atom:entry>
</atom:feed>
</m:inline>
</atom:link>
</atom:entry>
___________ Tried using the following solutions yet unsuccessful ___________
1) Cleared the cache
/IWBEP/CACHE_CLEANUP
/IWFND/CACHE_CLEANUP
2) Checked all the Date fields for "Nullable", both at header and item entitys.
_________ not clear about my xml format _________________
1) please check the xml format. i read other blogs and feel it is correct.
Regards,
Nitin Koushik
[email protected]Hi Nitin,
there seems to be an issue with the xml in the request body.
As an approach, you could try to send two separate requests, in order to check if the creation of the parent entity works and then use the specified link and check if the creation of the child entity works with the given xml. This could help to clarify which part of the xml is actually rejected
I've copied below the xml of a deep insert that works for me.
It is the request body of a POST request sent to the BusinessPartnerCollection of the service ZGWSAMPLE_SRV that can be found here:
https://sapes1.sapdevcenter.com/sap/opu/odata/sap/ZGWSAMPLE_SRV?sap-ds-debug=true
Hope it helps a bit.
Regards,
Carlos
<?xml version="1.0" encoding="utf-8"?>
<entry xml:base="http:/.../sap/opu/odata/sap/ZGWSAMPLE_SRV/"
xmlns="http://www.w3.org/2005/Atom"
xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata"
xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices">
<category term="ZGWSAMPLE_SRV.BusinessPartner"
scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme"/>
<link href="BusinessPartnerCollection('0100000002')/Contacts"
rel="http://schemas.microsoft.com/ado/2007/08/dataservices/related/Contacts"
type="application/atom+xml;type=feed"
title="Contacts">
<m:inline>
<feed xml:base="http://.../sap/opu/odata/sap/ZGWSAMPLE_SRV/">
<entry>
<category term="ZGWSAMPLE_SRV.Contact"
scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme"/>
<content type="application/xml">
<m:properties>
<d:BusinessPartnerID>0100000002</d:BusinessPartnerID>
<d:Title/>
<d:FirstName>Maria Julia</d:FirstName>
<d:MiddleName/>
<d:LastName>Brown</d:LastName>
<d:Nickname>Mary</d:Nickname>
<d:Initials/>
<d:***>F</d:***>
<d:PhoneNumber>3023352668</d:PhoneNumber>
<d:FaxNumber/>
<d:EmailAddress>[email protected]</d:EmailAddress>
<d:Language>E</d:Language>
<d:PostalCode>19899</d:PostalCode>
<d:City>Wilmington, Delaware</d:City>
<d:Street>1 2345 King Street</d:Street>
<d:Building>1</d:Building>
<d:Country>US</d:Country>
<d:AddressType>02</d:AddressType>
</m:properties>
</content>
</entry>
</feed>
</m:inline>
</link>
<content type="application/xml">
<m:properties>
<d:AddressType>02</d:AddressType>
<d:Country>US</d:Country>
<d:Street>1 2345 King Street</d:Street>
<d:PostalCode>19899</d:PostalCode>
<d:City>Wilmington, Delaware</d:City>
<d:CurrencyCode>USD</d:CurrencyCode>
<d:LegalForm>Ltd.</d:LegalForm>
<d:CompanyName>DelBont Industries3</d:CompanyName>
<d:BusinessPartnerID>0100000002</d:BusinessPartnerID>
<d:BpRole>01</d:BpRole>
<d:EmailAddress>[email protected]</d:EmailAddress>
</m:properties>
</content>
</entry> -
CALL TRANSFORMATION on Unicode WebAS 6.20: No valid source context supplied
Hello,
in the last day's I was stuck into a strange problem. I had to develop a Web Service Client on our Web AS 6.20 Unicode system. I followed the Blog <a href="/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap">Consuming Web Service from ABAP</a>. The problem was that my CALL TRANSFORMATION always throwed an exception "No valid source context supplied". I've tested the transformation with a local copy of the XML the Web Service returned and it works quite well. I had a look into the Documentaion of CALL TRANSFORMATION and it says:
== Documentation Quote Begin ==
Addition 3a
... SOURCE XML sxml
Effect
Specification of the transformation source
Transfer the XML document sxml using addition 3a. The following three possibilities exist for specifiying sxml:
The XML document can be in an ABAP variable sxml of the type STRING or XSTRING or in an internal standard table sxml of the elementary line type C.
== Documentation Quote End ==
So there should be no difference between STRING and XSTRING. But there is a difference! Here is my testcase which I've derived from my Blog <a href="/people/gregor.wolf3/blog/2006/06/27/geocode-business-partner-with-google-maps">Geocode Business Partner with Google Maps</a>:
<b>XSLT Transformation - ZGOOGLE_GEOCODE_TO_ABAP</b>
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:asx="http://www.sap.com/abapxml" xmlns:kml="http://earth.google.com/kml/2.0" version="1.0">
<xsl:template match="/">
<asx:abap version="1.0">
<asx:values>
<GEOCODE>
<LON>
<xsl:value-of select="substring-before(kml:kml/kml:Response/kml:Placemark/kml:Point/kml:coordinates,',')"/>
</LON>
<LAT>
<xsl:value-of select="substring-before(substring-after(kml:kml/kml:Response/kml:Placemark/kml:Point/kml:coordinates,','),',')"/>
</LAT>
<ALT>
<xsl:value-of select="substring-after(substring-after(kml:kml/kml:Response/kml:Placemark/kml:Point/kml:coordinates,','),',')"/>
</ALT>
</GEOCODE>
</asx:values>
</asx:abap>
</xsl:template>
</xsl:transform>
<b>ABAP Report</b>
REPORT z_gw_test_geocode.
DATA:
BEGIN OF geocode,
lon TYPE string,
lat TYPE string,
alt TYPE string,
END OF geocode.
DATA: client TYPE REF TO if_http_client,
url TYPE string,
c_xml TYPE string,
x_xml type xstring.
* Build URL to call Googe Maps Geocoding
CONCATENATE 'http://maps.google.com/maps/geo?'
'q=Tacherting,+DE'
'&output=xml'
'&key=ABQIAAAA2WL-mG7HpdSjlxystL3uBhRvBuAcdiWwcJAQgt9kNvfse-yNqBQuxwHkHo31WjTJ_RzVPIhXNludVg'
INTO url.
****Create the HTTP client
CALL METHOD cl_http_client=>create_by_url
EXPORTING
url = url
IMPORTING
client = client
EXCEPTIONS
OTHERS = 1.
client->send( ).
client->receive( ).
****Get the response content in Character format
c_xml = client->response->get_cdata( ).
****Get the response content as Binary
x_xml = client->response->get_data( ).
****Transform XML as String to ABAP Values
DATA: xslt_err TYPE REF TO cx_xslt_exception,
error_text TYPE string.
WRITE: / 'Transformation with STRING'.
TRY.
CALL TRANSFORMATION zgoogle_geocode_to_abap
SOURCE XML c_xml
RESULT geocode = geocode.
CATCH cx_xslt_exception INTO xslt_err.
error_text = xslt_err->get_text( ).
WRITE: / error_text.
ENDTRY.
WRITE: / 'LON: ', geocode-lon.
WRITE: / 'LAT: ', geocode-lat.
WRITE: / 'ALT: ', geocode-alt.
****Transform XML as XString to ABAP Values
WRITE: / 'Transformation with XSTRING'.
TRY.
CALL TRANSFORMATION zgoogle_geocode_to_abap
SOURCE XML x_xml
RESULT geocode = geocode.
CATCH cx_xslt_exception INTO xslt_err.
error_text = xslt_err->get_text( ).
WRITE: / error_text.
ENDTRY.
WRITE: / 'LON: ', geocode-lon.
WRITE: / 'LAT: ', geocode-lat.
WRITE: / 'ALT: ', geocode-alt.
<b>Result</b>
This is the result on our 6.20 Unicode System:
Transformation with STRING
No valid source context supplied
LON:
LAT:
ALT:
Transformation with XSTRING
LON: 12.570504
LAT: 48.078269
ALT: 0
I've tried it on our 6.20 and 6.40 NON-Unicode systems and the result was:
Transformation with STRING
LON: 12.570504
LAT: 48.078269
ALT: 0
Transformation with XSTRING
LON: 12.570504
LAT: 48.078269
ALT: 0
Finaly I've tried it on our Solutin Manager 4.0 which runs on Web AS 7.00 and is also a Unicode installation. Here the result is correct:
Transformation with STRING
LON: 12.570504
LAT: 48.078269
ALT: 0
Transformation with XSTRING
LON: 12.570504
LAT: 48.078269
ALT: 0
So now what to do? I've found nothing in OSS regarding this behaviour. Any tips? I also try a OSS Message.
Regards
GregorHi,
Can you tell me about your project on short notes. For information.
Regards
R.Rajendran -
Q-Info Record found for material rev level 06
Dear All
I have an error Q-info record found for material xxx rev level 06 while doing migo inbound delivery. Even i verify with some documents also but till not to come out of this problem. Is any body having solution.
Please specify whether it is minor or major problem.
Awaiting for ur replyIn QI01/QI02--->You must have created the quality Info record for the vendor /material/revision combination.
Suppose Material for which PO is cretaed is having latest revision 6 & infor record exists for rev 5 or less and not for rev level 6 ,then you may get this error.Also if relase date for vendor /material/revision combination is not valid then also you can get such error.
only way is you can create with future relase date..and chaeck again. -
Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."
Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/
-
Error message "No valid source context supplied"
Hii,
I will add buttons to my html page. So far, I inserted the following code to my bsp page:
<% DATA: ls_button type CRMT_THTMLB_BUTTON,
lt_button type CRMT_THTMLB_BUTTON_t.
CLEAR ls_button.
ls_button-type = cl_thtmlb_util=>gc_icon_edit.
ls_button-on_click = ''.
ls_button-enabled = 'X'.
ls_button-text = 'Cancel'.
append ls_button to lt_button'.
%>
<thtmlb:areaFrameSetter toolbarButtons = "<%= lt_button %>"
maxButtonNumber = "1" />
When I remove the buttons, that I inserted before with the configuration tool (button Coniguration) and test my page, I get the following error message:
Cannot display view Z_SHOW/Upload of UI Component Z_SHOW
An exception has occured
Exception Class CX_BSP_ELEMENT_EXCEPTION-:No valid source context supplied
Methode CL_BSP_ELEMENT=>IF_BSP_ELEMENT~RAISE_ERROR
Source Test Row: 3
Can anyone explain me, how to fix the error message?
Thanks and regards,
HarrisI have the same error,could you tell me how to solve it .thanks !
无法显示视图 ZGSWIDET/DetailsEF
已出现异常 例外分类 CX_BSP_ELEMENT_EXCEPTION - : No valid source context supplied
方法: CL_BSP_ELEMENT=>IF_BSP_ELEMENT~RAISE_ERROR
源文本行: 3
Maybe you are looking for
-
How to install oracle 11g or 10g
i am just novice to oracle. i ned help on hw to download and install a standalone 11g or 10g on my laptop with windows7, 3GB, AMD Athlon II x2, 320GB. MY Email is [email protected]
-
Connecting keyboard via bluetooth to Panasonic Viera or Apple TV
My apple keyboard is discoverable when viewing settings on my apple PC however when I try to connect by keyboard via Bluetooth to my Panasonice Viera TV or Apple TV under settings>bluetooth, the keyboard name never appears and the bluetooth search mo
-
Acrobat 7.0 and Windows 8
Is Adobe Acrobat 7.0 Standard compatible with Windows 8?
-
Create attachment with BINARY_RELATION_CREATE to BUS2081
Hello, I'm trying to create attachment with BINARY_RELATION_CREATE to incoming invoice. i succeed for BKPF with objtype = 'MESSAGE', but when i try to attach for BUS2081- there is no error but i can't see the document attached not in FB03 and not in
-
Simple update on itunes. now cant access.
I simply updated iTunes to 11.1.4 and now I cant access my screen sharing from my snow leopard. I could before I updated. sometimes I want to give up on apple products and all the crazy updates. any suggestions???