No Validity Date in BUS1065 Hired Event

Hi,
when bus1065 event Hired is triggered from PA40, the key ValidityBegin is not set. Does anybody know why this key is not set and how can I fix the problem?
Thanks in advance.
/Elvez

Actually, an EMPLOYEET object is available as a parameter of the BUS1065-HIRED event, but this may of course depend on your release. In standard workflow WS00400220 this EMPLOYEET object is bound from the triggering event to the workflow container.

Similar Messages

BUS1065 Hired Event

Hi,
an BUS1065.HIRED event is triggered when a Hiring action in transaction PA40 has been executed. More precisely, the event is triggered after infotype 0000, 0003, 0001 have been created. However, I would like to delay the event triggered until infotype 0016 has been maintained. Is that possible - how?
Thank you.
/Elvez

hi
As per your requirement, create a wait step in the workflow design where u have to maintained a container element which related to Bor 1065 i.e. Personnel number and in the step wait mentioned wait for event, in the container Element tab describe your container elemnt and in event tab just add your event hired and also the all the hr functionary for PA40 is going to maintained. then it will work properply
thanks
Roopesh

How to change both start and end dates for an business event (or any object

Hi all.
We are in the case to change the validity dates for several business events in training management.
The special point is that both, start and end date, have to be changed.
In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
Is there any better solution for this?
Thanks in advance for your help.
Best regards.

Hi,
I gueass the best solution is to use PV1A t-code.
You can write an LSMW for this t-code if the number of business events to be maintained is huge.
Regards,
Dilek

Error messege- Please enter a valid date in Background Job

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,
Did you put the date fields to be dynamic in your variant? i.e if in your variant you specified date range of last year, this will not work for this year and eventually give you an error message that the date is not valid...
Dev.

Error messege in Background Job(SM37) - Please enter a valid date

Hi all,
background job which is scheduled in sm37 is giving error for dated 01.01.2009 to 30.01.2009.
But before 31.12.2008 it was working fine
error messege-
This is happening in Production and developement client.
While running the report it showing the error messege- Please enter a valid date
One function module is used in the report for geting fiscal year from date.
it is showing the following error messege for perticular date range- 01.01.2009 to 30.01.2009.
GM_GET_FISCAL_YEAR
Error
Fiscal year variant V3 not defined or maintained for date 01.01.2009
Thanks
Susanta

Hi,Because this datein the past

Changing date (and sequence) of events by changing dates of photos no longer seems to work. Any idea what to do?

I am scanning in old slides and negatives (from the 1960s and 70s), and I want to get the resulting "events" in sequence from when the photos were taken, rather than when they were scanned. So I have been changing the dates of the photos, and previously this resulted in the associated event moving to the proper sequence. This definitely worked a month or so ago, both with prints scanned in on a flat-bed scanner, and also with slides and negatives scanned with a Veho scanner. That was faulty, however, and so it has been replaced with a Plustek 7500i scanner, using SilverFast scanning software, and importing the resulting images into iPhoto. I have recently tried to change the dates of the resulting events, and it doesn't seem to work as it used to. There has been an update to iPhoto 9.1.3 since my earlier success.
Take for example one event, CS73A. Hovering over the event in the "All events" display gives dates of 1 Apr 2011 to 2 Apr 2011; these are the dates the slides were scanned in. If I open the event and choose the Info tab, it gives the event date as 02/03/1973 (which is the approximate date that I changed it to). I had done a batch change on the event this time, so the date and time on the first slide is 2 March 1973 09:30:48. Each successive slide is 1 minute later, and the last is 2 March 1973 10:08:48 (38 slides). I asked for the dates in the files to be changed as well.
I don't know what I'm doing that's different from before. The only things I can think of are (a) something has changed in the iPhoto update, or (b) the SilverFast software stores the scanning date in some part of the EXIF that iPhoto can read but not change. I don't have tools to examine the EXIF unfortunately.
What to do?

Chris, I have run into the same problem.
Try this:
Open an event with more than one photo in it.
Adjust the date of one or more photos. The event date does not update.
Delete any one photo. The event date now updates to match the above date change.
Undo the delete photo. The event date stays matching.
Change the date of any photo again. The event date updates now every time.
If you close the event and reopen it, you have to start over with the delete one photo thing.
I don't understand it but it works here.
I also have had the problem of events not sorting themselves in order of the dates when VIEW, SORT, BY DATE is selected. This seems to affect only the events were photo date changes had been made. Using the delete thing seems to keep the events in order.
Another funny thing: When I put photos into iMovie the times in iMovie show as 7 hours off the photo time.
I think Apple owes us an update to iLife!

Why can't I set a relative date for a recurring event in calendar on my ipod touch?

why can't I set a relative date for a recurring event in calendar on my ipod touch?

Because The Calendar app does not support it. There are apps in the App store that do.

BOM Valid Date

Hi,
While creating BOM due to some human error we took wrong valid date.Now i want to change it.
Please suggest me the T-code or any customization to change the same.
"I am online"

Dear Pawar
This are the basic IMG settings in order to used the engineering change management
features.
x refers to a tick.
First setup the control data in OS54.
Revision sections
Fields :-
Revision level active            x
Ext. revision level              x
Higher revision level            x
Object Management Record sections
Fields :-
Object maintenance               x
Assign alternative date          x
Overide value/assignment date sections
Fields :-
Only with leading change mst.    x
Setting the Revision level active is to activate the engineering change management for
material master. If you do not want the engineering change management for materials,
remove the tick.
With a tick in "Higher revision level", the new revision level has to be always higher
than the old revision.
Secondly, setup the external number range in OS53.
If you use the internal number range, then remove the external number range.
Third, define the status for the change master records in transaction SM30 - V_T419S.
Change No.     Chg        Date Chg     Dist. Lock      Description
Status         Poss
1             x            x             ' '         Active
2            ' '          ' '            ' '         Inactive
3            ' '          ' '             x          Locked
Fourth, define modification parameters for the BOM in OS27.
Fields :-
BOM Validty Maint.               x
EC Management Active             x
History Requirement             ' '
Unit Piece                      PC
The rest of the fields are blank.
If the History Requirement is tick, every time during creation of the BOM, SAP will
prompt your for an ECN number as is compulsory.
Lastly, define fields selection for routing in OP5A.
PP task lists: initial screen -> Change number -> Transaction code -> Tick Req.
Setting the Transaction code fields Required indicate that you have make the ECN number ........
Hope this will help you one of our friends gave me this
Pavan

Regd : How to find Validity date for a user in central user system

Hi Experts;
I want to get the list of users with profile SAP_ALL with following details like validity ,user type ,user name ,user id..
I can get through SUIM for each individual systems.Its very difficult to login to each system ,generate the report.So I prefered to go for Central system
But if I use central user system I have no option to find validity and user type for the system ( SUIM - > Cross system application )
I have also tried to the table USRO2 ( which gives only the list of users in the central system )
So is there any possible ways to find the Users with profile SAP _ALL with validity date in the central user system. So that I can easily generate it as one report instead of logging to each and every system
Regards
Sanjeev.S

Hi Ruchit
Thanks for your reply. I want to find the validity date of all users having SAP_ALL
profile of all child system connected through central user system .So it is possible
to do that in Centrals System by executing the report?
If I execute that report in Central user system will it give the details of all child
system connected to central system
I think it will give only the result of Central system and not the child system connected to Central system.Please clarify me.
I can execute the report by logging to each child system ,but it takes very long hours for me since there are many system in my landscape.
Awaiting for your reply.'
Thanks
Sanjeev.S

IPhoto says it cannot import my photos b/c they may be an unrecognized file or the file may not contain valid data. The operation could not be completed. Error code is: ImageCaptureCoreError-9905.

Unable to download photos from my camera. iPhoto returns an error message that states: The following files could not be imported (they may be an unrecognized file or the files may not contain valid data). FILE NAME: 100_0490.JPG REASON: com.apple.ImageCaptureCoreError- 9905. WHAT'S UP WITH THAT? Did not have a problem importing photos under the LEOPARD OS, however, now that I have upgraded to Yosemite 10.10.3 the iPHOTO app is not performing the imports.

Are you using Photos, or iPhoto? Maybe you've got a corrupt file on your camera. I would try using the image capture application to import the bad picture to my desktop. If it works and the picture looks ok, then delete that pic from the camera, then try to import into iphoto again. You can then import the pic it was saying was bad from your desktop.
Or, try downloading all the pics using image capture and then import from the download folder.

Validity date in RFQ

Hi all,
Can anyone explain me what is the correct definition of the Validity start date and end date in the RFQ.
The reason I am asking this question is , If you eneter the start date and end date in the RFQ and create the PO with reference to RFQ, these dates gets copied on to the PO. if the document type of PO is NB then these fields are not visible on PO screen bu in the background the table EKPO is updated with these two filed. And the if you try to eneter the SES after these dates sysetm is not allowing and giving the message as SES date is beyond the valididty date.
Has any one come across any such issue. Can any one suggest any solution to this.

Hi Don,
RFQ means...requesting quotation from a vendor. Validity date start and validity end means the quotation should be send before the validity end date from the vendor. Before getting the quotation and before knowing the rate, how could you make purchase order to that vendor. Before you rise PO, you should maintain the quotation in ME47. As per standard SAP, you should rise po w.r.to quotation.
Regards,
Prasath

Mass extention of service entry sheet condition record validity date

Hi all,
I have immediate requirement. i need to extend the validity date for condition record related to the Service entry sheet. This has to done mass sheet changes.
I am looking for Any bapi or Standard function module or any config changes.
I am looking forward for your valuable inputs.
Regards,
Sreenivasa Sarma K

Arun,
This doesn't suprise me...
I'm not sure if there is a standard solution, but you could do this via user-exit/BADI (see [here|http://www.sapfans.com/forums/viewtopic.php?p=648307] under maintenance plans )
PeteA
[www.pjas.com]

DMS Document Validity date issue.

Hello All,
I have an issue in DMS Valid from Date & Valid to date as below.
In our Document type when our document status is set to OB i.e. obsolete, in front of the status, system is showing two dates like 22.01.2014 to 31.12.9999.
We are not using change number functionality in this document type. But still system is showing two dates. When document is in RE i.e Release status system is showing 22.01.2104... date in front of the status.
Could you please let us know why it is showing two dates in front of document status.
Thanks

Hi,
from my point of view I can inform you that these dates are validity dates for the document. Normally these dates are filled when the document is released to show which version of the document is valid or was valid in a specific period.
By using menu "Extras" >> "Versions". Here a list of all versions should be displayed and the columns "Valid From" and "Valid to" should show the validity dates.
Normally these date values are only filled when the status has set the "release" flag in transaction DC10.
Best regards,
Christoph

Changing validity date using BAPI_PROFITCENTER_CHANGE for a profit center.

Hi Friends
I need your help to know if we can use BAPI_PROFITCENTER_CHANGE to change the validity period of a profit center.I am using this BAPI in a LSMW program.
The changes I want to make are something like changing the validity dates from
1) 01/01/2006 - 12/12/9999 to 01/01/2007 - 12/12/9999
2) 01/01/2006 - 12/12/9999 to 01/01/2005 - 12/12/9999
3) 01/01/2006 - 12/12/9999 to 01/01/2006 - 12/12/2010
or should I use BAPI_PROFITCENTER_CREATE?
-Thanks
Mitesh

change document in profit center change
Bapi - BAPI_ASSET_ACQUISITION_POST
need a function module for profit center
Please give me reward points...

How can I set an validity date for a given vendor?

Hello,
we are currently trying to set a "validity date" for vendors.
Basically, our vendors need to be audited, and are "accepted" for a period of time, beyond which we'd need to re-audit them.
What we'd like the system to do is block use of the vendor if this date was exceeded.
Anyone has an idea on the way to achieve this?
PS: We know that there is a way to do this at the material level, we instead wish to manage it centrally for the vendor
Tx

Hello Nisha,
before doing business with a new vendor for services, our QA group needs to go thru a serie of verifications. We check various things such as insurance, certification,...
Once "approved", the vendor can be utilised by the plant for a certain period of time, after which a "re-audit" is necessary.
What I'd like to implement is a field where the QA group would enter this date, after which the vendor would be automatically blocked for usage.
This would then trigger the "re-audit" followed by the release from QA (who'd re-modify the date with the new one), and so on.
The vendor is not necessarily used for supply chain. Sometimes, it could be for services , maintenance, or other.
Tx for the ideas.

No Validity Date in BUS1065 Hired Event

Similar Messages

Maybe you are looking for