No values from selection screen

Hi ppl,
I have written a report program which has 3 parameters on the selection screen (Personnel number - pernr, trip number - reinr and status - abrec).
I have a subroutine to check for the validity of the personnel number entered on the screen. The other two parameters do not have any validity check.
I am using these 3 parameters in my SELECT statement. But, the problem is that when I execute it, at runtime, only the parameter for personnel number shows the value entered on the selection screen. The other two parameters show initial value at runtime though an entry has been made on the selection screen. Thus, it returns a subrc value of 4 though there are matching entries.
Has anybody face such a problem? Please advise.
Thanks.

Hi David,
Mentioning the event AT SELECTION SCREEN should resolve your problem.
This will ensure that the values are picked from the selection sreen for all the parameters.
(Else, if you do not use this event, your SELECT statement will not execute successfully the first time. But, if you execute your program again, it will fetch correct values.)
Hope it solves your problem.
Thanks,
Dawood.

Similar Messages

Problem in getting parameter value from selection screen in web dynpro abap

Hi,
I am facing problem in getting parameter value from selection screen.
Please find my code below:
DATA LT_PAR_ITEM TYPE IF_WD_SELECT_OPTIONS=>TT_SELECTION_SCREEN_ITEM.
FIELD-SYMBOLS:<FS_PAR_ITEM> LIKE LINE OF LT_PAR_ITEM,
                             <FS_OBJ_USAGE>    TYPE REF TO data.
WD_THIS->M_HANDLER->GET_PARAMETER_FIELDS( IMPORTING ET_FIELDS = LT_PAR_ITEM ).
LOOP AT LT_PAR_ITEM ASSIGNING <FS_PAR_ITEM>.
    CASE <FS_PAR_ITEM>-M_ID.
      WHEN `OBJ_USAGE`.
         ASSIGN <FS_PAR_ITEM>-M_VALUE->* TO <FS_OBJ_USAGE>.
[ Here, sy-subrc is 4, <FS_OBJ_USAGE> is not assigning.]
    ENDCASE.
ENDLOOP.
So, can any one solve this problem.
Thanks in advance,
Radhika

Hi Radhika,
Try using GET_RANGE_TABLE_OF_SEL_FIELD...
Please Refer below code..
   DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
DATA: WSFLIGHT TYPE SFLIGHT.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
CLEAR ISFLIGHT. REFRESH ISFLIGHT.
SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
                       WHERE CARRID IN <FS_CARRID>.
NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
Thanks,
Regards,
Kiran

How to put values from selection screen to ztable

hi all,
i have created a ztable.
now i want to put data through se38.
i have given 5 parameters in selection screen same as there in ztable.
now if i put values in selection screen then it should put that values to my ztable .
how can i put values into my ztable.
i used insert but not workiing.

Hi,
Try this.
TABLES : ztable.
SELECTION-SCREEN:BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETER : p_field1 TYPE field1_in_ztable,
                        p_field2 TYPE field2_in_ztable.
                        p_field3 TYPE field3_in_ztable.
                        p_field4 TYPE field4_in_ztable.
                        p_field5 TYPE field5_in_ztable.
SELECTION-SCREEN:END OF BLOCK b1.
DATA : itab TYPE TABLE ztable,
             wa_itab TYPE ztable.
AT SELECTION-SCREEN.
      MOVE p_field1 TO wa_itab-field1.
      MOVE p_field2 TO wa_itab-field2.
      MOVE p_field3 TO wa_itab-field3.
      MOVE p_field4 TO wa_itab-field4.
      MOVE p_field5 TO wa_itab-field5.
INSERT ztable FROM wa_itab.
IF sy-subrc = 0.
MESSAGE 'Successfully saved' TYPE 'I'.
ENDIF.
Thanks,
Sri.
Edited by: Sri on Jul 28, 2009 4:15 PM

Unable to retreive values from selection screen built using WDR_SELEC_OPTIO

Hi All,
I have created a selection screen as below
lr_field = wd_this->m_handler->create_range_table( 'YFMTFLOW' ).
* ASSIGN lr_field->* TO <fs_range>.
* ls_date-sign   = 'I'.
* ls_date-option = 'EQ'.
* ls_date-low    = 'US'.
* APPEND ls_date TO <fs_range>.
* Add the select-option to the group
wd_this->m_handler->add_selection_field(
    i_id           = 'FLOW'
    i_within_block = 'PROC'
    i_no_intervals = abap_true
    it_result      = lr_field ).
If i enter some value and click a button to retireve the values as below
DATA
    lt_sel_item TYPE if_wd_select_options=>tt_selection_screen_item.
types: ty_flow type range of yfmtflow.
FIELD-SYMBOLS:
    <fs_sel_item> LIKE LINE OF lt_sel_item,
    <fs_process>   TYPE yfmtprocess,
    <fs_flow>   TYPE ty_flow.
* Get the selection-screen items
l_handler->get_selection_screen_items(
    IMPORTING et_selection_screen_items = lt_sel_item ).
* Retrieve the values from the select-options items
LOOP AT lt_sel_item ASSIGNING <fs_sel_item>.
    CASE <fs_sel_item>-m_id.
      WHEN `PROCESS`.
        ASSIGN <fs_sel_item>-m_value->* TO <fs_process>.
      WHEN 'FLOW'.
        ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_flow>.
    ENDCASE.
ENDLOOP.
<fs_flow> is empty
but after I enter value and then press enter and then click the button to retrieve the values I am able to get low value <fs_flow> not the sign and option
Is it the standard functionality ,if yes how can we overcome
Thanks
Bala Duvvuri

Am giving clear coding of select options.
nOTE: S_CARR_ID IS THE DATA ELEMENT OF CARR ID FIELD,
FOR THAT I AM APPLYING SELECT OPTIONS IN BELOW CODING.
WRITE THE BELOW CODE IN WDDOINT( ) METHOD OF
REQUIRED VIEW
Data: lt_range_table type ref to data,
     read_only type abap_bool.
WD_THIS->M_WD_SELECT_OPTIONS = WD_THIS-
>WD_CPIFC_SELECT_OPTIONS( ).
WD_THIS->M_HANDLER = WD_THIS->M_WD_SELECT_OPTIONS-
>INIT_SELECT_SCREEN( ).
WD_THIS->M_HANDLER->SET_GLOBAL_OPTIONS(
     I_DISPLAY_BTN_CANCEL = ABAP_FALSE
     I_DISPLAY_BTN_CHECK = ABAP_FALSE
     I_DISPLAY_BTN_RESET = ABAP_FALSE
     I_DISPLAY_BTN_EXECUTE = ABAP_FALSE ).
LT_RANGE_TABLE = WD_THIS->M_HANDLER-
>CREATE_RANGE_TABLE( I_TYPENAME = 'S_CARR_ID' ).
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD(
          I_ID = 'S_CARR_ID'
          IT_RESULT = LT_RANGE_TABLE
          I_READ_ONLY = READ_ONLY ).
BELOW CODE IN REQUIRED ACTION( SAY IN SOME BUTTON
ACTION WHICH WILL RETRIEVE THE DATA FROM DATABASE TABLE
USING SELECTI OPTIONS VALUES)
fIRST THE GET REFERENCE TO NODE( CTRL F7--->READ
CONTEXTB---FLIGHT NODE )
***THEN BELOW CODE
DATA: RT_CARRID TYPE REF TO DATA.
DATA:IS_FLIGHT TYPE TABLE OF SFLIGHT.
FIELD_SYMBOLS: <FS_CARRID> TYPE TABLE.
RT_CARRID = WD_THIS-> M_HANDLER-
>GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
ASSIGN RT_CARRID-> TO <FS_CARRID>.*
SELECT * INTO CORRRESPONDING FIELDS OF TABLE IS_FLIGHT
   FROM SFLIGHT WHERE CARRID IN <FS_CARRID>
NODE_FLIGHT->BIND_TABLE( IS_FLIGHT ).

Post values from selection screen into vkm5 transaction

Hi all,
i need to create a report , when user enters values in the selection screen of that report, that values must be transported into a transaction VKM5 and then that transported values must be updated in a ztable.
ex:
in selection screen if user enter doc no:xxxxxx
                                                     date: 20.09.2011
                                                     Reason for release: some text
then that doc no: xxxxx must be transported into vkm5 transaction and that values(selection screen values) must be uploaded into a ztable.
i tried the below code
TABLES: ZVKM5.
data: IT_ZVKM5 type standard table of ZVKM5,
      WA_ZVKM5 type ZVKM5.
PARAMETERS    : S_VBELN LIKE ZVKM5-VBELN ,
                s_date LIKE zvkm5-bldat ,
                s_text LIKE zvkm5-text .
call transaction 'VKM5'.
*LOOP AT IT_ZVKM5 INTO WA_ZVKM5.
   WA_ZVKM5-VBELN = S_VBELN.
   WA_ZVKM5-bldat = S_DATE.
   WA_ZVKM5-text = S_TEXT .
   modify ZVKM5 from table IT_ZVKM5.
if sy-subrc = 0.
endif.
*ENDLOOP.
Kindly suggest me,
thanks in advance,
ben2012.

Thanks to all ,
Solved by me.
REPORT ZVKM5.
TABLES: ZVKM5, vbuk.
types: begin of ty_zvkm5 ,
       vbeln type VBELN_VL,
       BLDAT type BLDAT,
       TEXT type TEXT,
       UNAME TYPE CDUSERNAME,
end of ty_zvkm5.
TYPES: BEGIN OF TY_CDHDR,
       OBJECTID TYPE CDOBJECTV,
END OF TY_CDHDR.
DATA: IT_CDHDR TYPE TABLE OF TY_CDHDR,
      WA_CDHDR TYPE TY_CDHDR.
data: IT_ZVKM5 like ZVKM5 occurs 0 with header line,
      WA_ZVKM5 type ty_ZVKM5.
DATA: bdcdata_wa TYPE bdcdata,
        bdcdata_tab TYPE TABLE OF bdcdata.
data: date type STRING.
PARAMETERS    : S_VBELN LIKE ZVKM5-VBELN ,
                s_date LIKE zvkm5-bldat ,
                s_text LIKE zvkm5-text .
      CLEAR bdcdata_wa.
      bdcdata_wa-program = 'RVKRED05'.
      bdcdata_wa-dynpro   = '1000'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab.
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval = 'VBELN-LOW'. " pass the field name
      APPEND bdcdata_wa TO bdcdata_tab.
      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'VBELN-LOW'. " pass the field name
      bdcdata_wa-fval = S_VBELN. " pass the date here
      APPEND bdcdata_wa TO bdcdata_tab .
call transaction 'VKM5' using bdcdata_tab .
REFRESH IT_ZVKM5.
SELECT OBJECTID
        FROM CDHDR INTO TABLE IT_CDHDR.
LOOP AT IT_CDHDR INTO WA_CDHDR.
IF WA_CDHDR-OBJECTID = S_VBELN.
move s_vbeln to it_zvkm5-vbeln.
move S_date to it_zvkm5-bldat.
move s_text to it_zvkm5-text.
MOVE SY-UNAME TO IT_ZVKM5-UNAME.
append it_zvkm5 to it_zvkm5.
modify zvkm5 from table it_zvkm5.
UPDATE zvkm5.
ENDIF.
ENDLOOP.
CLEAR: S_VBELN, S_DATE, S_TEXT.

Passing the values from selection screen to screen painter

Hello Friends,
I'm making one report program in which im calling one screen which i have designed, in my selection screen there is a select option for customer tht accepts value range now i want to select all the customers entered in select options and pass these values in screen(screen painter).
pls guide me how this can be done.
Regards,
Sunny

Screen painter is a tool in ABAP dev workbench used to create the screens using the
T-code SE51. In the screen painter, you can define the following interface elements with their associated attributes.
1. Input/Output Fields
2. Field Names
3. Checkboxes
4. Radio Buttons
5. Group Boxes
6. Sub screens.
7. Pushbuttons with No Fixed Position
Create a Z program in tcode SE38.
Go to transaction SE51.
Enter the created program name and screen number.
Click on flowlogic tab.
Uncomment the statement u201C MODULE STATUS_0100 u201C.
CASE SY-UCOMM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN 'DISPLAY'.
      SELECT SINGLE Fileds to selsct
           INTO (interanl table or tablename-fileds)
      WHERE Condition.    WHEN 'CLEAR'.
      CLEAR table.
ENDCASE.
ENDMODULE.

How to refresh value in selection screen field

Hi Experts,
I have a requirement to refresh the value in selection screen.while i run the report in selection screen i selecting one variant for look the output if i use some other field value with same variant without save its working fine i am avle to see the data but while i come back to again selection screen and selecting some other variant that extra add value is not getting refresh its showing with new variant.Its happening for only one variant not for all if i select some other variant then its getting refresh value in same field.Any one can help me for this issue.
Thanks.

Hi,
That means, I believe - the value that is "not changing" is saved in the particular variant. You can easily verify it by starting the report without variant and then selecting the variant in question. Remove the value from screen and save the variant again. Don't forget to check of variant needs to be transported from development system...
cheers
Janis

How to pass a default value in selection screen of logical database pnpce

Dear All,
Can any one tell me how to pass a default value in selection screen of logical database pnpce .
Regards
Rakesh Singh

Hi Rakesh,
Go to SE36 (logical database Builder).First enter PNPCE in Logical Database and press documentation,here you will get the details of exactly what is PNPCE and how it works.After that select selections in subojects in se36 only and enter display ,there you have the include from where you acn get the idea.
Regards,
Rahul

Exporting and importing a field value from one screen to another in BSP

Hi All,
I am working on a BSP application which consists of multiple screens. I have to export the value corresponding to a value selected from a drop down and import it in another screen so that in the next screen values can be populated corrsponding to the value selected in the drop down in the first screen.
I tried using SET/GET parameter and also EXPORT/IMPORT so that I can get value from one screen into another screen but both the statements are not working in BSP....
Please help...
Vivek Gupta
Edited by: guptav_infy on Feb 21, 2010 11:33 AM

Hi All,
This question is still un answered. please reply ..
Vivek

How to get the value from select list to text box

Hi,
I have a select list i want to retrieve the value from select list to text box.
How can i do that???
Regards,
Sakthi.

Hi Sakthi,
Yo can use the Java script for that..
Dynamically the value will come into text box.
Use the below script.
<script type="text/javascript">
function disFormItems()
var lReturn = $v(here your select list name)
alert(lReturn);
document.getElementById(here your text box name).value =lReturn; }
</script>Cheers,
Shan

How to get a value from select one choice (created by static view)

Hi,
Whene ever Iam trying to get value from select one choice which is created by static view iam getting only index.How to get the actual value in 11g .please help me anybody .Thanx in advance....
Edited by: 874530 on Jul 22, 2011 11:05 PM

Thnax for your quick reply..
Iam using 11.1.1.3.0 version.
My code is
<af:selectOneChoice value="#{bindings.DenialLevel.inputValue}"
label="#{bindings.DenialLevel.label}"
required="#{bindings.DenialLevel.hints.mandatory}"
shortDesc="#{bindings.DenialLevel.hints.tooltip}"
id="soc2"
valuePassThru="true"
binding="#{backing_denialcomment.denialLevelList}">
<f:selectItems value="#{bindings.DenialLevel.items}" id="si6"/>
</af:selectOneChoice>
and in bean am not able to get value of attribute .Iam getting only index...

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

Restrict 'Executing report in background' from selection screen

I want user to not to select option for executing report in background from Selection Screen of the program.
i.e. 'Execute Program in Background' option in 1st menu bar tab should either be disabled OR if user clicks on it then he should get error message on selection screen itself.
Thanks,
Falguni

Hi Falguni,
Write the code based on function code SJOB in the event AT SELECTION-SCREEN. Write the following code :
AT SELECTION-SCREEN
CASE SY-UCOMM.
WHEN 'SJOB'.
MESSAGE E000 WITH 'You cannot schedule background job'.
ENDCASE.
Thanks & Regards,
Faheem.

Transfer field value from one screen to another screen

hi gurus,
I am using field exit in mm02, i want to transfer field value from one screen to another screen. I am using Export, Import, Some FM like DYNP.......
but not getting the value.
can any one give idea about this.
Thanks in Advance,
Sudheer.

I THINK IN FIELD EXITS SOME RESTRICTION IS THERE YOU CAN NOT USE CALL TRANSACTION OR CALL SCREEN. I DONT KNOW WHAT IS YOUR ACTUAL REQUIREMENT. BUT YOU ARE TRYING TO CALL TRANSACTION USING MEMORY ID OR SOMETHING THEN I THINK IN FIELD EXIT YOU CAN NOT DO THAT. PLS CORRECT ME IF I AM WRONG
REGARDS
SHIBA DUTTA

No values from selection screen

Similar Messages

Maybe you are looking for