No vendor specified error in SFP transaction

Hi ,
I am trying to copy SAP standard adobe interactice forms to custom forms to make changes.  When I use SFP transaction to copy the standard form to Z_form, system is throwing error message "No Vendor Specified". Could you please suggest resolution for this error
Thanks
Vikram

Hi all,
it seems to be related to the setup of the ADS connection:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/f064f473b56bede10000000a11466f/frameset.htm
If you complete this setup after creating the ADSUser, the error should not occur anymore.
Regards,
Jeffrey

Similar Messages

  • Unable to Inspect this PDF error in SFP transaction

    Hi All,
    When I try to import a form using the SFP transaction I get the Adobe Lifecycle Designer error stating "Unable to inspect this PDF. Probably because the PDF is corrupt.(Page=1). Try resaving the pdf in acrobat to fix it."
    I get this error even if I resave in acrobat. Can someone help me resolve this error.
    Thanks for all your help in advance.
    Regards,
    Divya

    Hi Markus,
    When i tried the following link...http://<host>:<port> /AdobeDocumentServices/Config , i have seen a SAP portal so i m in a thinking that Adobe Document services are up and running..
    Could you pls. guide me if there is another way to check whether ADS is running? & are there any SAP Notes regarding this topic??i have been through 778479, 886572 but that didnt help..
    In the render error log files if i see it has displayed that NO ERROR REPORTED..
    Thanks,
    Subbu

  • Error in SFP Transaction when trying to view the Form

    Hi all,
    ABAPer has build a form using Tx SFP --> Executed it and when he try to view the print preview or try to prnt, he is getting the following below error:
    Exception       SYSTEM_ERROR
    Message ID:          FPRUNX                     Message number:           001
    Message:
    ADS: The render error log file has been written to f:\u(200101)
    I have searched SAP Notes & other sites but it didnt help, Could you pls. help me out.
    Thanks,
    Subbu

    Hi Markus,
    When i tried the following link...http://<host>:<port> /AdobeDocumentServices/Config , i have seen a SAP portal so i m in a thinking that Adobe Document services are up and running..
    Could you pls. guide me if there is another way to check whether ADS is running? & are there any SAP Notes regarding this topic??i have been through 778479, 886572 but that didnt help..
    In the render error log files if i see it has displayed that NO ERROR REPORTED..
    Thanks,
    Subbu

  • Getting a Message No Vendor Specified  FromCL_MESSAGE_HELPER=============CP

    Dear All ,
                       I am Getting a message No Vendor Specified in a Z transaction . But in Z Transaction I have Specified a Message in the Program . I am attaching the same below
      IF SY-SUBRC = 0.
        IT_AUFM_TEMP[] = IT_AUFM[].
        SORT IT_AUFM_TEMP BY AUFNR.
        DELETE ADJACENT DUPLICATES FROM IT_AUFM_TEMP COMPARING AUFNR.
      ELSE .
        MESSAGE 'No data for selection' TYPE 'S'.
        LEAVE LIST-PROCESSING.
      ENDIF.
    When it Goes on the Message Statement then it goes into the Class CL_MESSAGE_HELPER=============CP In which it fires the Message No Vendor Specified . Can please guide me with the solution .
    Regards
    Shankar

    Hi Shankar,
    This is the common problem in client system. create a new message class with your informations and use them insted of
    MESSAGE 'No data for selection' TYPE 'S'.
    Regards,
    Kumar M

  • Erroe "No Vendor Specified " occur in CO15

    Hi Expert's,
                        i have done Enh. for CO15 for Material Stock to save the confirmation "Stock is already Reserved to other Production Order" but this "No Vendor Specified" error msg coming.
    Regards,
    Anand

    Hi all,
    it seems to be related to the setup of the ADS connection:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/f064f473b56bede10000000a11466f/frameset.htm
    If you complete this setup after creating the ADSUser, the error should not occur anymore.
    Regards,
    Jeffrey

  • Error "No Vendor specified"

    Hi
    I am new to ECATT... I wanted to record VA01.
    1. I tried with SAP GUI(Record) when clicked Start recording I get this message "No vendor Specified"
    2. then i tried recording using TCD recording... (VA01, VL01N, VF01)... I recorded the transaction VL01N (eNjoy transaction) it is working fine....what is the difference. ??
    All the notes say that TCD cannot recognize eNjoy transactions but its working fine... Im confused
    can anyone explain???
    Regards
    Sweety
    Edited by: sweety_VA on May 24, 2011 11:25 AM

    Hi,
    ad 1. check these 2 links, there are some information that may be your case
    http://sapblog.rmtiwari.com/2009/08/writing-thought-provoking-erroneous.html
    eCATT Error
    ad 2. Enjoy SAP components are created on frontend computer (in oposition to standard screen elements), so this mechanism require special treating. If in your case everything works fine it means that in your test case you're not using EnjoySAP components and TCD is enough for your needs. For example on screen you can see ALV object and some standard screen elements. You can do changes to standard elements, but not to ALV.
    Best regards
    Marcin Cholewczuk

  • Error: NO VENDOR SPECIFIED in MIRO

    Hello SAPians,
    I am getting an error of "No Vendor Specified" at the time of MIRO. Everything is alright except this wired error. I am not getting any documentation as well for the same. But in the next column of error message text as Origin column, the message is saying as "Post". These are 2 delivery note which is processing.
    Please suggest.
    Jk

    Hi,
    If your creating Vendor Invoice with reference to PO, please check the PO has creatred with which Vendor and check the same Vendor in our company code.
    If the vendor is not extended in Compay code data, extend vendor in Company code data.
    Best Regards,
    Rama Mohan

  • In SFP transaction , when i press layout buton , give me error 'Direct display for documents not activated'

    in SFP transaction;
    when i press layout buton , it give me an error.
    SOFFICEINTEGRATION020
    'Direct display for documents not activated'

    Yes i installed .
    One of our product systems , i take  this error but  another one it works correctly . 

  • Failed:Error disabled - SFP vendor not supported on Fabric Interconnect 6248UP

    We are connecting a FC-uplink on a Fabric Interconnect 6248UP to a MDS9124. On the Fabric Interconnect side we use a 8Gbps SFP (DSpSFP-FC8G-SW) on the MDS9124 side there is a 4 Gbps SFP.This should work when speed is at fixed speed 4 Gbps on both sides (I was told). When the SFP's and cabling is connected I get an error in the UCS manager on the FC-uplink port we are using:
    Failed:Error disabled - SFP vendor not supported.
    I cannot change the speed on the FC-Uplink ( I can only set user-label). The Fabric Interconnect is configured for FC on the last 8 ports and that is where the SFP for the storage is located (port 31).

    I have a similar problem.  I'm using port 1/41 and gets this output
    show system firmware expand | head lines 10
    UCSM:
       Running-Vers: 2.1(3a)
       Package-Vers: 2.1(3a)A
       Activate-Status: Ready
    Catalog:
       Running-Vers: 2.1(3a)T
       Package-Vers: 2.1(3a)A
       Activate-Status: Ready
    sh interface fc 1/41
    fc1/41 is down (Error disabled - SFP vendor not supported)
       Hardware is Fibre Channel, SFP is Unknown(0)
       Port WWN is 20:29:00:2a:6a:7e:7b:00
       Admin port mode is F, trunk mode is off
       snmp link state traps are enabled
       Port vsan is 1
       Receive data field Size is 2112
       Beacon is turned off
       1 minute input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
       1 minute output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
         0 frames input, 0 bytes
           0 discards, 0 errors
           0 CRC, 0 unknown class
           0 too long, 0 too short
         0 frames output, 0 bytes
           0 discards, 0 errors
         0 input OLS, 0 LRR, 0 NOS, 0 loop inits
         0 output OLS, 0 LRR, 0 NOS, 0 loop inits
       last clearing of "show interface" counters never
    show int fc 1/41 transceiver details
    fc1/41 sfp is present but not supported
       name is CISCO-FINISAR  
       part number is FTLX8571D3BCL-C2
       revision is A  
       serial number is FNS17401NYG    
       FC Transmitter type is Unknown(0)
       FC Transmitter supports Unknown(0) link length
       Transmission medium is Unknown(0)
       Supported speeds are - Min speed: -1 Mb/s, Max speed: -1 Mb/s
       Nominal bit rate is 10300 MBits/sec
       Link length supported for 50/125mm fiber is 80 m(s)
       Link length supported for 62.5/125mm fiber is 20 m(s)
       No tx fault, no rx loss, no sync exists, diagnostic monitoring type is 0x68
       SFP Diagnostics Information:
                                         Alarms                 Warnings
    Is this a firmware problem?

  • Message error " no vendor specified"

    Dear experts,
    I am using the ABAP Message Statement u2026
    i.e
      message ' Data not found ' type 'S'.
    But it always return the same message for every message statement that is u201C no vendor specifiedu201D
    << Take your time >>
    Regards,
    Riz
    Edited by: Rob Burbank on Feb 17, 2009 10:06 AM

    Hi Rizwan,
    Could u please share ur answer.
    I am trying to upload a XMl file(SFPF_IDWTCERT_US_1099MISC.XML) in form IDWTCERT_US_1099MISC and when i try to Activate the form the message
    "No Vendor Specified" Comes and the form is not activated.
    I am following the steps from OSS Note 1949022 where there are manual steps.
    could you please help in this issue.
    Thanks,
    Kunal Leo

  • SECATT "NO Vendor Specified"

    Hello Gurus
    i am trying to create a scrpit via SECATT but when i enter the transaction to record i get the error "No Vendor Specidifed".
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    At step 3 in the above link  i get error message "No vendor Specified" and nothing happens after that.
    (No matter which transaction code i use to record)
    Thanks!!!
    Owais

    I think you are in ECC6.0. Go search for notes for proper message. Thats not the message you should get. I dont remember the note number but there notes around this message. Once you apply the note, you will get correct error message.

  • Eror in r3: No vendor Specified

    Hi ,
    I am facing problem with server proxy for inbound interface .
    I am getting error"No Vendor Specified" , while activating the server proxy.
    Thanks In Advance

    Hi Swathi,
      Once again check your date type, message type,message mapping and message interfaces is activated in IR?
    If everything fine, then try to generate your proxy once again.
      If still problem persist, then goto T.code SXMB_ADM to see if your SAP ECC system is configured as a application system with the corresponding RFC destination of type 'H' to SAP PI?
    Hope this help to you.
    Regards,
    P.Rajesh

  • [Solved] if(Transaction specified for a non-transactional database) then

    I am getting started with BDBXML 2.4.14 transactions and XQuery update functionality and I am having some difficulty with 'node insert ...' and transactions failing with 'Transaction specified for a non-transactional database'
    Thanks for helping out.
    Setup:
    I have coded up a singleton manager for the XmlManger with a ThreadLocal holding the transaction and a query method to execute XQueries. The setup goes like this:
    environmentConfig = new EnvironmentConfig();
    environmentConfig.setRunRecovery(true);               environmentConfig.setTransactional(true);               environmentConfig.setAllowCreate(true);               environmentConfig.setRunRecovery(true);               environmentConfig.setInitializeCache(true);                environmentConfig.setTxnMaxActive(0);               environmentConfig.setInitializeLocking(true);               environmentConfig.setInitializeLogging(true);               environmentConfig.setErrorStream(System.err);
    environmentConfig.setLockDetectMode(LockDetectMode.MINWRITE);               environmentConfig.setJoinEnvironment(true);               environmentConfig.setThreaded(true);
    xmlManagerConfig = new XmlManagerConfig();               xmlManagerConfig.setAdoptEnvironment(true);               xmlManagerConfig.setAllowAutoOpen(true);               xmlManagerConfig.setAllowExternalAccess(true);
    xmlContainerConfig = new XmlContainerConfig();               xmlContainerConfig.setAllowValidation(false);               xmlContainerConfig.setIndexNodes(true);               xmlContainerConfig.setNodeContainer(true);
    // initialize
    instance.xmlManager = new XmlManager(instance.getEnvironment(),                    instance.getXmlManagerConfig());
    instance.xmlContainer = instance.xmlManager.openContainer(                              containerName, instance.getXmlContainerConfig());
    private ThreadLocal<XmlTransaction> transaction = new ThreadLocal<XmlTransaction>();
    public XmlTransaction getTransaction() throws Exception {
              if (transaction.get() == null) {
                   XmlTransaction t = xmlManager.createTransaction();
                   log.info("Transaction created, id: " + t.getTransaction().getId());
                   transaction.set(t);
              } else if (log.isDebugEnabled()) {
                   log.debug("Reusing transaction, id: "
                             + transaction.get().getTransaction().getId());
              return transaction.get();
         private XmlQueryContext createQueryContext(String docName) throws Exception {
              XmlQueryContext context = xmlManager.createQueryContext(
                        XmlQueryContext.LiveValues, XmlQueryContext.Lazy);
              List<NamespacePrefix> namespacePrefixs = documentPrefixes.get(docName);
              // declare ddi namespaces
              for (NamespacePrefix namespacePrefix : namespacePrefixs) {
                   context.setNamespace(namespacePrefix.getPrefix(), namespacePrefix
                             .getNamespace());
              return context;
         public XmlResults xQuery(String query) throws Exception {
              XmlQueryExpression xmlQueryExpression = null;
              XmlQueryContext xmlQueryContext = getQueryContext(docName);
              try {
                   xmlQueryExpression = xmlManager.prepare(getTransaction(), query,
                             xmlQueryContext);
                   log.info(query.toString());
              } catch (Exception e) {
                   if (xmlQueryContext != null) {
                        xmlQueryContext.delete();
                   throw new DDIFtpException("Error prepare query: " + query, e);
              XmlResults rs = null;
              try {
                   rs = xmlQueryExpression.execute(getTransaction(), xmlQueryContext);
              // catch deadlock and implement retry
              catch (Exception e) {
                   throw new DDIFtpException("Error on query execute of: " + query, e);
              } finally {
                   if (xmlQueryContext != null) {
                        xmlQueryContext.delete();
                   xmlQueryExpression.delete();
              return rs;
    <?xml version="1.0" encoding="UTF-8"?>
    <Test version="0.1">
    <Project id="test-project" agency="dda">
    <File id="large-doc.xml" type="ddi"/>
    <File id="complex-doc.xml" type="ddi"/>
    </Project>
    <Project id="2nd-project" agency="test.org"/>
    </Test>
    Problem:
    All the queries are run through the xQuery method and I do delete the XmlResults afterwards. How do I get around the 'Transaction specified for a non-transactional database' what is the transactions doing? How do I get state information out of a transaction? What am I doing wrong here?
    1 First I insert a node:
    Transaction created, id: -2147483647
    Adding document: large-doc.xml to xml container
    Reusing transaction, id: -2147483647
    Working doc: ddieditor.xml
    Root element: Test
    Reusing transaction, id: -2147483647
    insert nodes <Project id="JUnitTest" agency="test.org"></Project> into doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test
    Reusing transaction, id: -2147483647
    2 Then do a query:
    Reusing transaction, id: -2147483647
    doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test/Project/@id
    Reusing transaction, id: -2147483647
    3 The same query again:
    Reusing transaction, id: -2147483647
    doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test/Project/@id
    Reusing transaction, id: -2147483647
    4 Delete a node:
    Reusing transaction, id: -2147483647
    delete node for $x in doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test/Project where $x/@id = '2nd-project' return $x
    Reusing transaction, id: -2147483647
    5 Then an error on query:
    Reusing transaction, id: -2147483647
    doc("dbxml:/ddieditor.dbxml/ddieditor.xml")/Test/Project/@id
    Reusing transaction, id: -2147483647
    Transaction specified for a non-transactional database
    com.sleepycat.dbxml.XmlException: Error: Invalid argument, errcode = DATABASE_ERROR
         at com.sleepycat.dbxml.dbxml_javaJNI.XmlResults_hasNext(Native Method)
         at com.sleepycat.dbxml.XmlResults.hasNext(XmlResults.java:136)
    Message was edited by:
    jannikj

    Ok got it solved by increasing the locks lockers and mutex's I allso increased the the log buffer size:
    environmentConfig = new EnvironmentConfig();
                   // general environment
                   environmentConfig.setAllowCreate(true);
                   environmentConfig.setRunRecovery(true); // light recovery on startup
                   //environmentConfig.setRunFatalRecovery(true); // heavy recovery on startup
                   environmentConfig.setJoinEnvironment(true); // reuse of environment: ok
                   environmentConfig.setThreaded(true);
                   // log subsystem
                   environmentConfig.setInitializeLogging(true);
                   environmentConfig.setLogAutoRemove(true);
                   environmentConfig.setLogBufferSize(128 * 1024); // default 32KB
                   environmentConfig.setInitializeCache(true); // shared memory region
                   environmentConfig.setCacheSize(2500 * 1024 * 1024); // 250MB cache
                   // transaction
                   environmentConfig.setTransactional(true);
                   environmentConfig.setTxnMaxActive(0); // live forever, no timeout               
                   // locking subsystem
                   environmentConfig.setInitializeLocking(true);
    environmentConfig.setMutexIncrement(22);
    environmentConfig.setMaxMutexes(200000);
    environmentConfig.setMaxLockers(200000);
    environmentConfig.setMaxLockObjects(200000); // default 1000
    environmentConfig.setMaxLocks(200000);
    // deadlock detection
                   environmentConfig.setLockDetectMode(LockDetectMode.MINWRITE);
    In the docs by Oracle it is limited information given regarding the impact of these settings and their options. Can you guys point in a direction where I can find some written answers or it hands on?

  • Error "Balance in transaction currency" using T.code J1iex

    Hello all,
                When i am capturing an excise invoice using T.code J1iex, the excise invoice is getting captured, but when we are trying to post the vendor using the same T.code j1iex,it is giving an error"Balance in transaction currency". Please help me and try to solve my problem asap.

    Hai,
    1.Flag the check box for rounding duty on procurement in IMG - Logisitics general - Tax on goods & mvts - India - Basic settings - Company code settings.
    2. Manually round off the excise values to next value in J1IEX - Change mode - item level - excise values.

  • No Vendor specified during creation of implicit enhancement

    I am trying to do the implicit enhacement in the include MSSCDFLS at the starting of the form ls_display .
    But it giving an message "No vendor Specified" and when i go to SE80 and check the enahcement then it is not activated and i didn't find any assigment in technical object list .
    thanks in advace !!

    Dear Experts,
    The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
    X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text 
    1     L     l     <=>     1     L     l
    1.121     KG     kg     <=>     1.000     L     l
    1     PCE     Piece     <=>     1     L     l
    1     BDL     Bundle     <=>     12     L     l
    1     PAL     Pallet     <=>     720     L     l
    Error is gettting when creation of Sales Order ,Order is standard order.
    When we double click on error message  the following details are shown.
    1.No alternative unit of measure specified
    message no:MM108
    2.Diagnosis:
       This alternative unit of measure is missing.
    3.System response :
       The system cannot carry out conversion
    4.Prodedure:
      This is due to Program error that should not occur.
    Please provide the exact solution on this issuse.
    Thanks

Maybe you are looking for

  • Extending range with 2 airports?

    Hi, I have an airport extreme that won't cover a good part of my house. I also have an older airport that I was wondering if there's some way to use to extend the range of the airport extreme? Thanks, Carl

  • Text styling issues - how do you balance columns?

    Hi! I am setting up some custom paragraph styles and am running into some issues with the columns not ending in the same place. Please see atached screen grab.  My Body text settings are: Embedded font - Berthold Imago family (16) Justified Line Spac

  • SAP WebAS Supportability - cannot run Web Service

    Hi Experts, I found in the supported platform document, boe_xi_30_supported_platforms_windows.pdf. It states that SAP Web Application Server 7 ...  Not supported for Web Services. Does this mean we cannot use Xcelius with Query as a web service on th

  • Is it required to nullify strings in finally java?

    I am working on j2ee web application. is it required to nullify strings in finally java, otherwise what will be the impact? ?

  • When is a new logfile created

    Hi, I noticed, that I have multiple Logfiles per day in the logview and I am wondering when a new logfile is created. Is there a setting to append always to the same file? Or is there a permanent link to the most recent logfile? Best regards Felix