No verbal response from Voice Over after 5.1.1 update.

The Voice Over on my iphone acts as if it in silent mode and does not reply with verbal audio nor beeps.
It only vibrates. The voice commands i give it work, but i get no verbal response.
I have tried rebooting but that did not solve the problem. I'm not sure if this is a bug in the latest software update.
Please help
Thank you

Similar Messages

HT3939 i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest

i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest

Ebay is not an official reseller. Return it if you can for a refund.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Ipad air - starts only "Voice over" after resume from stand by

Hi
today, in the morning, i used as always my ipad air (ios 7.01) for about 2 hours (i have it from about 1 month).
I saw only some email (no app installation, no IOS upgrade, nothing else)
Then i put it in stand by mode (by pushing on/off button).
When, in the afternoon, i resume it from stand by (pushing home button) , appears only the white page of "Voice over" and No other thing is possible to do.
I restarted it many times (on/off button + home button pressed for 10-15 seconds until apple icon appears) but after the startup only "Voice over" appears.
Only "Voice Over" is possible to use.................like the first time 1 month ago, when i started up it ad i have configured it for the first time.
It seems that the ipad was reset.
How is possible ?
It could be a IOS failure problem ?
or It's possible that someone has tried to unlock the ipad by pressing the wrong pin code and the ipad now is blocked (No one message that says "ipad blocked" or similar appears.........only "voice over" starts)????.
Please, someone can help me to understand what happened, in order to know what to do ?
How can i try to recover all the data in the ipad ?
Thanks a lot for all
Mario

I confirm that Only the white "setup" page starts (where is wrote "Hello > slide to set up").
The ipad seems that was resetted.
How is possible ?
It could be a IOS failure problem ?
or It's possible that someone has tried to unlock the ipad by pressing the wrong pin code and the ipad now is blocked (No one message that says "ipad blocked" or similar appears.........only "initial setup" starts)????.
I read in a manual of IOS 7 that is possible that the device is resetted after 10 times with wrong pin but after 5-6 times should appear a message with "ipad blocked for n° minutes" or a similar message.
No message appear....only the white page of the setup appears.
Please, someone can help me to understand what happened, in order to know what to do ?

How can I remove high-pitched distortion from voice-over?

Hi folks,
I'm completely new to fixing audio. I am making a short film, and for a voice-over, I recently had to do an interview over the phone (the subject lives in a very remote location). Actually, I used GoToMeeting, we called into the conference call feature from our phones, and I recorded the meeting into a wmv file. Then I re-encoded it using Expression Encoder so I could pull it into Adobe Audition.
I am attaching a short phrase (extracted as a .wav file) from the interview in the hope that someone can tell me how to improve the quality of the sound. I have Adobe Premiere Pro and Adobe Audition, both CS6 and CC versions.
Short voice recording - Creative COW
1. Can anyone tell me, please, how to get rid of the high-pitched "ringing" kind of distortion that we hear on each of her loudest syllables? Also, does this particular type of distortion have a name? I kept finding articles on fixing sound, but wasn't sure what I'm dealing with here, so I wasn't sure which techniques were likely to work. Tried a bunch, and the overall sound got better, but so far nothing has fixed that high-pitched distortion.
2. After getting rid of that ringing distortion, what are your recommendations for making the voice recording sound as rich, smooth and full as possible? In real life, this woman has a BEAUTIFUL, rich voice. But the recording sounds like a flat telephone call (because it is).
Thanks in advance,
Mary

Well, I don't think there's any miracles to be had here. As you say, it's a telephone call and I fear that, since phone lines filter out anything above about 4k, there's no way of replacing it.
I had a look at your file in spectral view and you can clearly see the original material going, as expected, up to about 4 kilohertz--but, above that, there's a generalised area of noise. My suspicion--and it's only a suspicion--is that during your double conversions (to wmv then through a third party app to something else) one of them has added the extra noise as it your original was full bandwidth.
Anyhow, best I could do was use the Marquee tool in Spectral View, draw a rectangle around the upper area (you can see a clear boundary between the programme content and the random extra frequencies) then just delete everything above just over 4 khz then delete.
As for making a phone call sound full and rich, if there was a way to do it, when I was working in TV we could have saved hundreds of thousands a year by using phones instead of far more expensive circuits!

No response from web server after a process ran for 1-2 minutes

Hi,
I have a proven pl/sql code, it took about 2+ minutes to complete in sqlplus.
But when I created a button to process the exactly same code in APex application, the process runs about 2 minutes and
applications bombs with this msg "No Response from web server".
Has anyone gotton this msg before?
Thanks,
Julie

Hi Julie,
See this thread - it may had some extra considerations for you: OHS Webserver Timeout for long running requests
Do you know if your error message is returned at a fixed time each time? You could test this by creating a procedure that sleeps for X amount of time and then vary X to see if you can find a cutoff point for losing the connection.
Also - I assume that your process keeps running on the database, despite the webserver connection being lost?
If it's not a limitation in your httpd.conf file (the default is 5 mins as others have pointed out), then perhaps your network colleagues have set something in your network configuration to kill connections longer than a certain period of time? This is what happened in my case.
Hope this helps.
Alan

Removing echo from voice over

Hi - we recorded some voice over in a hotel room whilst on the road and it has a pretty bad echo on it. Sounds like we recorded in the bathroom. Does anyone have some suggestions to reducing this echo? any help much appreciated. thanks!
michael

The echo or reverberation of the room is usually quieter than the direct sound,
so sometimes using an expander or noise gate will help.
If the recording was done in stereo (like the camera's built-in mics, for example),
you can get rid of some of the ambience by mixing left and right together as mono.
Finally, when shooting, wear headphones.
Do a test shot, play it back and listen.
If the sound is too roomy, move the mic closer to the talent.
Good luck!
Les

No response from the server after 31st Jan 2008

Hi,
Just now came across a strange problem. I am working on a
flex application which uses Flex 2 SDK and LCDS with Tomcat.
Everything was working fine till yesterday(31st Jan 2008).
But when I run my application today (1st Feb 2008), the
request goes to the server and infact the server processed the
request(seen from log files) but the response is not reaching the
client (either result or fault).
If I change my local system date to yesterday(31st Jan 2008)
or before and run the application, everything works fine.
I assume that this is due to licensing issue with LCDS, but I
m using express version which doesn't have any such restrictions.
I'm looking into the same.
In the mean while I would appreciate, If I could get any
clues or solutions for the above problem.
Thanks,
Chakree.

I figured out the problem.
It has nothing to do with any kind of licensing.
There was a date bug with Hibernate our application was using
and fixing that problem resolved this issue.

Desperately need BizSpark help, received no response from support email after several days

I emailed [email protected] on 02/25 and still have not received a response. Where can I post questions? Here is the original email:
Hello, I recently started working for a new company. My previous company was a BizSpark graduate. I loved the program, so thought I would apply for it again at my new company. I went through the signup process
using my existing MS account (redacted). At no point did it indicate I was doing anything other than filling out a new application. When I finished, it went to my old bizspark page, but all the company information was changed (except for the logo)! Not only
is that terrible, because now it appears as though my new company is a BizSpark graduate, but I still want to try to enroll my new company in the program!
Please advise!
I have since edited everything except my company name because I cannot find a way to change it.

Scott, I dont deal directly with the BizSpark program, but I've reached out to a few people internally who I think do. I'll let you know what I hear back, and maybe we can get your email replied to.
Thanks,
Mike
MSDN and TechNet Subscriptions Support
Did Microsoft call you out of the blue about your computer?
No, they didn't.

Can't open any apps downloaded from the internet after installing application loader update and messages beta

I've run into an unusual problem recently. I think it it related to two recent software installs.The problem only started after i installed the new application loader.
My issue : I'm unable to open application I downloaded from the web. I get the following error message below.
Question: Has anyone else run into this issue and do you have a solution?
Thanks for you help.
P.S I haven't tried rolling back the lastest softwarte installs yet. I'm hoping I can avoid that.

When I press cancel nothing happens. I can do nothing and it still won't load the program.
Messages beta: http://www.apple.com/macosx/mountain-lion/messages-beta/

Cannot boot from ext drive after 10.5.2 update

I followed the procedure in tech article 306502 for creating and updating a bootable drive. I am in a PPC Mini environment. External drive is LaCie 160 GB rugged firewire portable with auxiliary power, I created the drive with 10.5.1 and it booted nicely to my two Minis (running 10.3.9 and 10.5.1). I then updated the external system with 10.5.2 from the Apple site and now it does not boot. Sits and spins with a white screen, grey apple, and whirligig. Whirled for 1/2 hour and tried deveral times.
I see this is not uncommon, but there have been no cures posted. One post suggested Disk Warrior. What would I do to with DW to move this problem forward. This is quite annoying, as I rely on being able to move around and boot from this drive when needed.
Thanks for any help.
Fred

after 10.5.2 two days ago, mine booted up regularly. however after the additional leopard graphics update last night, it no longer boots up at all. i have to usethis ****** vista to report the problem. my macbook is right beside me, with nothing but a plain blue screen. occasionaly the mouse cursor appears for about 30 seconds, then dissapears and the screen remains blue. what can i do? if i cant log in apple cant update my mac!!! help!!!

Why wont my iphone charge from my computer after ios 7.1 update?

I have a windows 8.1 PC. I use it for work. I also have an iphone. Today, I updated the ios on my phone to 7.1. During the update, the phone was connected to my PC usb port with the apple charging cable to keep it charged. The update finished, and I noticed that the battery was at 66%. It was 100% before I started the update. There was no lighting bolt/charging symbol. I disconnected the phone from the computer. I plugged it into the apple wall charger. It charges from that. I tried another apple cable on the PC. Still no dice. I do get the sound from the PC that a device is being connected/disconnected when I plug/un-plug the cable from the phone on the PC. When the phone is connected to the PC, It won't show on "this PC" as any device. I did try re-starting the PC. I did update Itunes, and did a back up of my phone before the update, using the exact same cable.
Why is my iphone 4G w ios 7.1 not charing when connected to my Win 8.1 PC?

I found the solution on my own. I opened task manager, admin, computer management, device manager. I scanned for harware changes. Apple mobile device came up with an ! symbol. I right clicked and updated the apple mobile device driver. It took about 15 seconds, but...
I never had to do this with any computer on my iphone 3 or 4G on any computer. Would have been good to know, apple.

Screen Black after waking from sleep mode (after 10.4.11 update)

This issue has happened before with an earlier update (10.3.8 Delta fixed the issue originally), and I suspect it is the same with this current update.
Has anyone else had this problem with the new update and has there been a patch released to fix the problem yet? Hopefully we can get an update soon.

This happens every so often to my 12" Aluminium PowerBook after sleeping (black screen, hard drive spinning away) and after trying every possible key combination and nothing helping, I'm usually left with the usual last resort, which is a hard restart. Of course that remedies the problem short term but unfortunately, only until the next time it happens. For me, it has been an issue since I bought it and is not affected by the OS.
I am wondering if it has anything to do with the clasp not working properly when the lid is closed. Sometimes I get the sleeping light, sometimes not - unless I play with the lid until it clicks shut. Then the light appears. Importantly, when the sleeping light appears, the machine always wakes properly with the lid opening. But I have noticed that when the light does not come on and I haven't bothered to shut it down properly, that is when the problem occurs. Which makes me wonder if rather than going into sleep mode it is actually going into hibernation mode due to non use? I haven't a clue but perhaps someone here knows far more about such things than myself?

Soun port input disappears from dialogue box after 10.6.4 update

Title says it all really.
Selecting the sound port input has become impossible after installing 10.6.4. I can set it to work as an input in teh control panel - but it is not then shown in the list of devices that I can select within the app.
I was using it yesterday - then installed 10.6.4 and now it has gone.
As this is VITAL to my use of the mac I hope this can fixed easily otherwise I will have to downgrade.

Hi,
I'm not sure if I am having the same issue. My mic input was working fine, then all of a sudden it stopped. I am trying to find the command "Use audio port for sound input"? Is this the command that you have found to be missing? If so how or what did you change to go 32 bit/64 bit. I can't seem to locate that command in my system>sound setup. Thanks

My iPad 2 Wont charge from my PC after 5.0.1 update! Any ideas as welcome?

Recently updated my iPad today and and then tried to charge it from my PC,. Walah, it doesn't charge anymore! I've use several usb slots and restored the iPad but still getting nothing! Anyone experiencing the same problems? £650 ***?

Even if it says 'not charging' it likely still is, just very, very slowly.
Most USB ports are not capable of putting out the 10W taht the iPad needs to quickly charge.
Are any of the USB's you tried a hub? the iPad didn't care for them before, likes them even less now.

IPhone Only Sends Mail From Default Account After 1.1.1 Update

I just noticed that no matter which account I use to send an email in the iPhone mail app, the email is sent from my default account. I have Yahoo, Gmail, and .Mac accounts, and they all function properly (i.e, they can all send and receive, view folders, etc.) When I change the default account to any of these accounts, all of my mail is sent from that account--including replies and forwards to messages in a non-default account. I don't think this occurred before the 1.1.1 update, but it's possible I never noticed it until now.
As you can imagine, changing the default account each time I need to send an email from a different account is frustrating. Any help would be greatly appreciated.
wolf2004

I noticed the same issue today, it was not like that before. I tested it prior to the update. I have yet to find a way around this besides switching the default account.

No verbal response from Voice Over after 5.1.1 update.

Similar Messages

Maybe you are looking for