No vibration on texts after 4.2

Anyone else? My phone silent switch is on but my phone doesn't vibrate even though all the settings are set to
Vibrate

Do you have a text tone set for when the iPhone is not on silent? If you don't have a default tone selected, the iPhone will not vibrate.

Similar Messages

HOW TO GET PHONE TO VIBRATE ON TEXT MESSAGES?

Is there a way to get the phone to vibrate when you get an incoming text?

The only way I ahave found to make the vibe for tests only is to actually set a ring tone for the message by going into settings -->sounds. After setting a tone in the settings I can flip the side switch to make the phone silent and then, and only then, does it ONLY vibrate for texts, but at the same time, everything is silent too. The phone will still vibrate for calls as well.

Bullets and Numbering "Text After" attribute

Hi Everyone,
I need to grab "Text After" attribute of and existing bullet list in InDesign document and change it to my text. I think, I need to get access to "kBNBulletTextAfterBoss", but I don't know which boss agregates it.
Thanks

I've found it a much better practice, especially in heavily numbered documents, to look for a paragraph style that can be set to start at zero. I usually apply it to any headings or subheadings where the numbering below remains consistent. But that's just my experience.
You can also right click and restrat or continue numbering.

How to add text after number in the same cell? "200 units", "3Kg", "17 sqm"

Dear Sirs,
I have problem with adding text after a number in the same cell.
For instance, in excel I am able to do this:
200 units -----> this is on the same cell. Any number I type, "units" will follow automatically.
I know that we can just type "200 units" but its in text format so it cannot be calculated supposedly I want to multiply it by others number.
I know that we can do this by splitting into two cells, one on the left for the number "200" and another one on the right for the text "units".
It would be helpfull if we could do this function such as "20 years", "3Kg" etc.
Sorry to trouble you all.
Thank you
Q

This is a case of uneven implementation in Numbers. This sort of functionality is available to format numbers used to label axis ticks on various charts, but not to format numbers in a cell. This feature should be requested.
As an aside, perhaps a spreadsheet that actually managed numeric units as part of the calculation would be powerful and useful in avoiding formula bugs, something like is available in Google calculations. If you are unfamiliar with this, try one of the following examples typed into any Google search entry field:
150 miles per gallon in liters per 100 kilometers
100 * 20 yards / 40 minutes in mph
Read more at http://www.google.com/intl/en/help/features.html#calculator

I am experiencing delayed typing with texting after upgrading to IOS 7 - anyone seeing this?

Both my wife and I are experiencing delayed "typing" with texting after the upgrade to IOS7. Concisely, you can keep typing, but there is a noticable delay before the text appears in the message section. I have also noticed delays with entering my 4 digit Passcode.

Mine was so bad that it was nearly impossible to type in my passcode. I finally restored the phone (reinstalled the software) and then restored from backup. All is working fine now. This is on my iPhone4. The real trick was getting past the passcode and then turning off Find my iPhone (which is required to restore) when it was nearly impossible to type my password in.
It solved my problem. After I did it I read somewhere here to try resetting all settings. That would be quicker but you may lose some settings you had. In any case restoring completely solved my problem.
My iPad did not experience any of these problems.

Sound for phone but vibrate for text

Hi. I would like to set my iPhone up so that it will make a sound for calls, but only vibrate for text. This is very important to me because I am on call for my job. Thus I would like to be awakened if called, but not for receiving an SMS.
A similarly useful feature would be to be able to use a different volume ringtone for text than for call (that way I could just set up a very quiet rintone for text).
Any help would be appreciated. Thanks.

The volume for ringtones for the phone and txt are set with the volume rocker on the outside of the phone. That is the same no matter what. Once solution would be to create a ringtone and reduce the volume of it when you create it. Another solution that I have seen mentioned here for a similar situation was to set the SMS tone to None. That should then allow it just to vibrate if you have vibrate turned on.

Want to add Custom text after Product Branding Image for application

Hi
Can we add any text after Product Branding Image for application
By default it will show the responsibility function name
My requirement is after company logo I want to add Text at the top of application
with center align
Need suggestions
Regards
Krishna

Hi Anoop
If I done what u suggested then the function responsibilty name will also come
and the application will be disturbed
Is their a way to edit the text at the top
Regards
Krishna

Error with PS text after Unicode conversion

Hi, we are having problem after doing unicode conversion with special
character not displayed correctly in a Web interface. In SAP
(transaction CN04) everything is OK, but if the PS text is displayed
through a Web interface (BSP for instance) some characters are
displayed wrong. One of these characters is the apostrophe in French
language ('). Is there an available tool to perform a conversion of
existing PS text after performing unicode upgrade ?

Hima ... try this
http://<server>/Lighthammer/JCOProxy?Mode=Reset

Getting unformatted text after decryption of formatted encrypted text

The problem getting unformatted text after decryption of a formatted encrypted text.
Im using Bouncy Caslte for encrypting the mail message.its a well formatted text but
after decryption its unformmated?
What will be the problem? why im getting the decrypted text as unformatted?

sorry im using Bouncy Castle for encryption
This is my code
try {
               Security
                         .addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
               KeyStore ks = KeyStore.getInstance("PKCS12", "BC");
               ks.load(new FileInputStream("C:/rajesh/raj_gmail.cer"), "tomcat".toCharArray());
               Enumeration e = ks.aliases();
               String keyAlias = null;
               String alias = null;
               while (e.hasMoreElements()) {
                    alias = (String) e.nextElement();
                    if (ks.isKeyEntry(alias)) {
                         keyAlias = alias;
               Certificate[] chain = ks.getCertificateChain(keyAlias);
               // create the generator for creating an smime/encrypted message
               SMIMEEnvelopedGenerator gen = new SMIMEEnvelopedGenerator();
               gen.addKeyTransRecipient((X509Certificate) chain[0]);
               Properties props = System.getProperties();
               try {
                    InputStream path = getServlet()
                              .getServletContext()
                              .getResourceAsStream(
                                        "/WEB-INF/classes/com/ips/ApplicationResources.properties");
                    props.load(path);
               } catch (Exception e1) {
                    System.out.println("Not able to load the properties file");
               props.put("mail.smtp.host", props.getProperty("mail.smtp.host"));
               Session session = Session.getDefaultInstance(props, null);
               MimeMessage msg = new MimeMessage(session);
               String body_heading = props
                         .getProperty("mail.request.message.body");
               body_heading = body_heading.replaceAll("[{]{1}[0]{1}[}]{1}",
                         Integer.toString(forms));
               msg.addRecipient(Message.RecipientType.TO, new InternetAddress(
                         props.getProperty("mail.to.address")));
               msg.setSubject(props.getProperty("mail.request.message.subject"));
               StringBuffer body = new StringBuffer();
               body.append(body_heading);
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.line1"));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.contact"));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.line2"));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.message.title")
                         + props.getProperty("mail.colon")
                         + String.format("%15s", title));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.message.fname")
                         + props.getProperty("mail.colon")
                         + String.format("%17s", firstname));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.message.lname")
                         + props.getProperty("mail.colon")
                         + String.format("%17s", lastname));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.message.address1")
                         + props.getProperty("mail.colon")
                         + String.format("%19s", address1));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.tab")
                         + props.getProperty("mail.colon")
                         + String.format("%20s", address2));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.tab")
                         + props.getProperty("mail.colon")
                         + String.format("%20s", town));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.tab")
                         + props.getProperty("mail.colon")
                         + String.format("%20s", county));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.message.pcode")
                         + props.getProperty("mail.colon")
                         + String.format("%11s", postcode));
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.message.email")
                         + props.getProperty("mail.colon")/*
                                                                  * +String.format("%33s",email
               body.append(props.getProperty("mail.linebreak")
                         + props.getProperty("mail.message.thanks"));
               MimeBodyPart bp1 = new MimeBodyPart();
               bp1.setText(body.toString());
               bp1 = gen.generate(bp1, SMIMEEnvelopedGenerator.RC2_CBC, "BC");
               Multipart multipart = new MimeMultipart();
               multipart.addBodyPart(bp1);
               msg.setContent(multipart);
               msg.saveChanges();
               Transport.send(msg);
          } catch (Exception e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          }if i print the original text im getting the content in my mail as
Please send me 1 application form pack(s)
Contact Details
Title: Mr
First name: rchanged
Last name: rchanged
Address: rchanged
: rchanged
: r
: r
Postcode: r4 4rr
Email:
Thank You
if encrypted is send
Please send me 1 application form pack(s) ------------------------------------------------------ Contact Details ------------------------------------------------------ Title: Mr First name: rchanged Last name: rchanged Address: rchanged : rchanged : r : r Postcode: r4 4rr Email: Thank You

Text after checking my voicemail

If there a way to turn this off, please tell me. The phone sends me a text after i check my vm.

Hello everyone, as Ann stated, the new software for the Rhyme does resolve the issue with the device receiving text messages after checking or receiving voicemail. Here is a link to the official benefits document. If you haven't already received this update it will be pushed soon. You can also check for updates by going to Settings>Software update.

Unable to text after update. Also, the dock buttons are frozen. I've tried restoring, but it doesn't fix problem. Any suggestions?

I am unable to text after update. Also, the dock buttons are frozen. I've tried restoring, but it doesn't fix problem. Any suggestions?

You posted in a thread that has not had any activity in 2 years! Please start your own topic. Also, please describe in detail all you have attempted to do in order to resolve the issue.
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please complete or update your system profile so the users here can properly help you.

Flex Alert box not showing text after single inverted comma

Hi friends,
I am launching a flex app (swf) from a JSP page. i am sending a value using flashvars like below.
flashvars.message = '<c:out value="${requestScope.message}"/>';
This message consists a single inverted comma in between...ex:- L'impression des pages
But when i want to show this message using alert box in flex like Alert.show(message);, it just shows
'L'. i mean it is not showing complete message. the text after inverted comma is missing....
it will be great if anyone can help me here...
Thanks,
Krish

Hi friends,
I am launching a flex app (swf) from a JSP page. i am sending a value using flashvars like below.
flashvars.message = '<c:out value="${requestScope.message}"/>';
This message consists a single inverted comma in between...ex:- L'impression des pages
But when i want to show this message using alert box in flex like Alert.show(message);, it just shows
'L'. i mean it is not showing complete message. the text after inverted comma is missing....
it will be great if anyone can help me here...
Thanks,
Krish

Outlook 2003 Suddenly cutting off email text after send

Hi everyone,
Some of my Windows 7 Users are experiencing a new issue with Outlook 2003 on their Windows 7 Pro computers. All systems affected are 64-bit. Most of our users are on Office 2003 and utilize Outlook with an in-house Exchange Server.
Just recently, in the last week or so, a few users have complained that after sending an email, a large portion of their message gets cut off. I've seen examples where emails are cut off mid-sentence. I suspect that a Windows 7 update maybe the
cause here, but I haven't been able to figure it out as of yet.
Does anyone know of any recent issues with any updates that might cause this? I suspect that it may have something to do with the IE 11 release and that some of our machines are updating to this version (which Outlook uses of course) and this maybe
the cause. This is the path I am using to troubleshoot, but wanted to see if anyone else with old software had experienced these issues?
Thanks!

32/64 OS Windows 7 with Outlook (office) standard edition 2003 - email set as HTML format and Word OFF as editor ++ IE 11 causes the issue here - cuts off the text AFTER the save on sending.
Reverting users affected to IE 10 seems to have fixed the issue here and using GP to lock out any options in IE to allow users to upgrade it and stopping any WSUS \ SCCM updates for IE 11 security to prevent it coming back down.
I guess we are all to blame as much as M$ - Outlook 2003 is over 10 years old and IE integration with HTML editor in Outlook was what we did in 2003 days - if we upgrade IE then its not a great surprise to find something breaks that relies on it.
I would be curious to know if this issue is affecting any of our Outlook 2013 \ 2010 friends with HTML formatting and using IE11 on Win 7 or 8.
I have licenses for our users to roll up from 2003 but its such a monster job I have hidden from it for..well 10 years due to training, macro and style manamgement issues and the shear pain I know will come out from users saying, "wehere my wee icon for
..." . BUT '03 is nearly end of life folks and although new does not = nirvana ((in fact I can't wait to find the many pains of 2013 Word and Outlook)) I suspect M$ will not be in a huge hurry to write a fix for a product that they are canning for support
soon - so I guess we either roll down to IE10 or roll up to 2013 Outlook.
Robert Crichton

Delete texts then cannot send any texts after.

When I delete my text messages (whether it be one text or all) I can't send another text after. My iMessage turns off and cannot be turned back on. So neither iMessages or SMS messages send. I have an iPhone 4 with the iOS 7 update.

Hi,
this sounds very odd.
Have you tried to check the mobile network settings (automatic provider search etc...)?
Can you test the BB with another SIM card e.g. from your family or frinds?
Alex
Please feel free to hit "Like" if my post was helpful :-) Thank You!

Vibrates on notifications after update

most of my apps are now vibrate during notifications since the update. I've searched through each of them doing it and there isn't even an option for vibrate so "disable vibrate" isn't a choice. I have disabled it for email txts. Any ideas? Verizon guys? I can not deal with this. It sounds dumb but it woke me up 6 times last night. I use my phone as my alarm clock. I can't just not keep it near my bed. Plus I don't need it sucking my battery dead every day.

Dear Andrealkern,
Good morning. I am sorry to hear of the vibrate notifications you are now receiving after the software updates. I know that can definitely be a nuisance especially if you use your phone as an alarm clock. It would be my pleasure to assist in disabling the vibrate alerts.
After your phone did the software update, did you power off the phone and power back on? If not, please do so. Also, ensure the notification volume under settings is turned off. To do so, tap on settings>sound>volumes>notifications. Let me know if that turns off the vibrate notifications.
If the notifications you are receiving are from applications you downloaded from the google play store, then try this. Tap on Google Play store>Menu(at the top right)>settings>uncheck notifications. After trying these two steps and you are still receiving vibrate notifications, please reach out to us for further assistance. You may also contact our Technical Support Team at 1800-922-0204.
MichelleS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

No vibration on texts after 4.2

Similar Messages

Maybe you are looking for