No video after OEL 6.2 update

Hello
I just update my machine. It was running great with OEL 6.1. I let it run the updates to take it to OEL 6.2
Now it won't start the Xserver.
The /var/log/Xorg.0.log only has (II) Informational entries, no (EE) error entries
I found the following in /var/log/gdm/:5.log file
do_ioctls: DRM version is 2.0.0 but this driver is only compatible with 2.3.x (kernel 2.6.34) and later.
The kernel version is
[root@thor gdm]# uname -a
Linux thor.hsd1.co.comcast.net 2.6.32-300.3.1.el6uek.x86_64 #1 SMP Fri Dec 9 18:57:35 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
My graphics card is a ATI Radeon card
[root@thor modprobe.d]# lsmod | grep radeon
radeon 483360 1
ttm 38556 1 radeon
drm_kms_helper 24900 1 radeon
drm 173909 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 5090 1 radeon
i2c_core 29229 4 i2c_viapro,radeon,drm,i2c_algo_bit
[root@thor modprobe.d]# lspci
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary)
Anyone else run into this and found the fix?
Thanks

Dude
Now I know why your called Dude.
Thanks for the link. The radeon.modeset=1 didn't work.
But I read the link and disabled kernel mode setting with radeon.modeset=0 anfd that worked.
Also nomodeset worked as well. Now I get my greating screen and can login again.
Thanks
Patrick

Similar Messages

  • Error Message when taking video after OS 4.3 update

    Anyone else getting this message "This movie format is not supported" after taking video? This just started after the OS 4.3 update. I did turn the phone off and on just to see if it was a fluke but it still happens. Thanks
    ~Ken

    For the benefit of others, two other threads I found on this subject:
    on iPhone 4g thread: http://discussions.apple.com/thread.jspa?messageID=13235938
    on iPhone 3GS thread: http://discussions.apple.com/thread.jspa?messageID=13148918
    (SAME PROBLEM IN BOTH POSTS - just two users posted in different forums)

  • Problem with video after installing ipod software update 1.2

    I recently downloaded the ipod software update version 1.2 for my ipod. It seems to have changed the video screen output as some of my videos now do not play full screen and instead have black boarders down each side of the screen while playing.
    At first I thought switching off the widescreen option in the video settings screen would fix the problem but doing this cuts off a large portion of the picture at the top and bottom of the screen. I can only assume this change in screen ratio came with the update and was wondering if anyone knows of a way to fix this problem or if it will be fixed in the next ipod software update with some kind of option to switch screen ratios in the video settings menu.
    I would like to keep updating my ipod but have since reset it so icould get full screen video playback and have been avioding the updates incase it happens again.

    hmmmm. were those videos that you converted yourself
    with QT Pro, alg2? if so, it might be worth checking
    on the possibility from this document:
    QuickTime Pro: DV format movies may require
    adjustment for iPod
    (if the source files were DV PAL, that can produce
    the "bars down the side" effect ... unlike NTSC where
    you get the "bars along the top" effect shown in the
    graphic in the document.)
    I did convert them myself but but not with quicktime pro will this solution still apply if were to purchase QT Pro or should i contact the company i bought my programme from.

  • I have no video after wndows 8.1 updates

    How can I install the video drivers, when I cant access my PC via a black screen?

    First of all you need to get into safemode
    for that press f8 or del key while starting the computer
    then you will get many options there you must go to safemode
    Secondly ,after getting to safemode go to 1.control panel ->2.Device Manager->3.Disable AMD HD Graphics
    Thats all
    then restart your computer to get into normal mode
    May be if you upgrade your amd hd driver your black screen problem will be gone

  • Stuttering audio video after 10.8.1 update

    Ever since I updated my Mid 2011 27" i7 imac to 10.8.1, the video keeps experiencing terrible stuttering. It affects DVD's, YouTube clips, and fully downloaded movies. I've seen a few other mentions of this on some forums, but nothing from Apple. Does anyone know what's going on?

    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • No internal video after 10.9.4 update (Pro 4,1)

    Upgraded to 10.9.4 on my MacBook Pro and none of the apps can access the video camera.  The light goes on but no picture!  Any ideas?

    Hello sphodromantis,
    The article linked below details some useful information and steps that can help get your iSight camera working again.
    How to Troubleshoot iSight
    http://support.apple.com/kb/HT2090
    Cheers,
    Allen

  • Yoga 13 after Win 8.1 update - apps for Netflix, CNN, ESPN, etc. will not play video - WTH?

    Can someone point me to where I can download the right driver(s) / updates that fix thw Windows 8.1 mess that crippled video playback in the Modern/Metro Win8 interface please?  
    I had other issues with wireless (which I fixed by buying a Linsys 802.11ac USB nub - finally decent range & performance), but really want to get this Win 8.1 video playback issue fixed.  
    OS is Windows 8.1
    Version 6.3.9600 Build 9600
    System Model 20175 
    System SKU Lenovo_MT_20175
    BIOS Version/Date Lenovo 66N55WW 2/28/2013
    BIOS Mode UEFI
    HD Graphics 4000 Driver date 10/1/2013
    Driver Version 10.18.10.3316
    Monitor driver is generic PnP Monitor by Microsoft, dated 6/21/2006
    Driver Version 6.3.9600.16384
    Purchased the system May, 2013.  
    Very disappointed that Microsoft/Intel/Lenovo forced this 8.1 "upgrade" on us without having checked it for flaws in operation like this.  I've read other people having this, and similar problems, so any fixes / suggestions / links are greatly welcomed.  

    (Note that all of the following applies only to the Yoga 13)
    I think the previous reply is inaccurate in several ways.  Let me address each one:
    "Seems like the fix for many of our Windows 8.1 update issues is to roll back to the Windows 8 drivers Lenovo offers on its site (Conexant Audio Driver in this case)"
    This isn't quite correct.  There is no need to "roll back" to any previous driver versions.  What actually happened with the Windows 8.1 upgrade is that the Windows installation process reinstalled or refreshed all of the drivers in the system, and for some reason this driver installation process screwed up and left some drivers not functioning correctly. In almost all cases the solution is to simply reinstall that driver with the current/same version. The Conexant driver is the poster child for this problem.  The version of the driver that comes with the Windows 8.1 upgrade is the same as the version on the Lenovo site.  However it is often necessary to reinstall this driver to get it installed correctly. 
    I just want to reiterate that this is not a version problem, it's a problem with the way 8.1 reinstalled the drivers. This need to reinstall drivers affected people differently, with some people needing to reinstall other drivers as well, such as the Intel Thermal Framework drivers, etc.
    Windows 8.1 comes with newer versions (also newer than the reposted drivers on the Lenovo site) of the network Wifi drivers that for my system have been an improvement. However I have not experienced a lot of the Wifi issues that others have reported.  The only issue I have had with Wifi is that it was always a bit slow to connect after coming out of sleep mode (30-60 seconds). After the 8.1 upgrade my Wifi connects very fast (less than 5 seconds).
    Windows 8.1 also came with an updated Intel graphics driver that is newer than the one on the Lenovo site.  I am not aware of any problems with this new version.
    My Yoga 13 is now functioning perfectly after the 8.1 update, although I did have to perform the reinstall of the Conexant drivers, and I had to reapply the fix for the touch screen missing the first swipe.  I recommend the list of Yoga 13 fixes mentioned on this site.
    "Microsoft or Lenovo should add a setting to the "Configure Windows Update" options - it should be "Wait 6 months after the update is published for it to stabilize"
    I don't agree with this as the drivers that come with 8.1 weren't unstable or problematic. Again, the problem is with the 8.1 installation process, and I do agree that Microsoft should work on fixing that.  It has certainly caused a lot of people some grief, but it also seems that we have a solution which is the driver reinstalls.
    I also don't recommend turning off Windows update.
    Finally, it may be that some of the issues you bulleted are more serious than I am aware, as I haven't had all of these problems.  I would like to know more about these:
    "Kill the video / audio in Windows Apps (aka "Modern" interface) - Netflix, ESPN videos, CNN videos, etc.  "
    This is certainly a common problem. At least we have the fix for this (reinstall the Conexant drivers).
    "Degrade WLAN performance (range and speed)"
    I am skeptical that 8.1 is responsible for Wifi issues.  Seems like in general the new 8.1 network stack is better.  I know that many people had wifi issues prior to the update.
    "Fuzz out the resolution / display such that Display has to be turned down from 150% to "small""
    I don't know about this issue, so I would like to hear more.
    Mess up touchpad, keyboard, tablet-mode keyboard
    This again seems more like a problem that existed before 8.1, as many people had issues with this.  The most consistent solution seems to be disabling the "ymc" service.
    lmader

  • Thunderbolt dock fails to initialize video after update

    Yosemite continues to be the buggiest OS X upgrade I've used in quite some time, if not ever.
    After this most recent update my 2560x1440 display does not come up when I get to the office and plug in my 2012 Macbook Pro Retina and Belkin's original Thunderbolt dock. I tried it with a newer dock (Elgato's Thunderbolt 2 dock) and experienced the same issue. Anytime I disconnect and reconnect I have to power cycle the entire dock to get my video back. I am using a mini displayport to display port cable plugged into the dock's free thunderbolt port.
    Anyone else experiencing the same issue?

    You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
    CleanMyMac - Uninstall
    CleanMyMac2 Un-install
    After un-installing, run this program to make sure you got all the pieces.
    EasyFind – Spotlight Replacement

  • After ATV2 5.0 update Netflix audio is not in sync with video

    As the title says, on ATV2 after the 5.0 update, Netflix audio is not in sync with video.
    Anyone else seeing this?

    I spoke tooo soon.
    Netflix audio is not in sync with video today as well. Any movie, it happens to all.

  • I had 5 videos that I could see in videos apps. But after your last OS update I can't find them on my iPhone. I can see them on the pc in itune when I connect the iPhone and go to videos directory.

    I had 5 videos that I could see in videos apps. But after your last OS update I can't find them on my iPhone. I can see them on the pc in itune when I connect the iPhone and go to videos directory.

    When syncing, check the Movies/TV Shows Tab in the iPhone menu, and make sure ALL movies are synced (or select the ones you want to sync)

  • Can't steam video after latest update on my I pad mini!

    Can't steam video after last update on I pad mini . Video loads very slow and keeps dropping out it was fine before the update!!!

    If it's showing a different Apple ID, you need to either update them from that Apple ID or delete and redownload them when signed into a different one, which may require repurchasing paid applications.
    (109113)

  • Can not play any video after update to 4.4.2

    Can not play any video after update to 4.4.2, it says always that i have to reconnect my HDMI Cable, reason HDCP error.

    I have made some tests,
    I can only view Trailers, every thing else dosn't work any more. I could not play any Video via Airplay. I tried to do it fom my IPhone 4, my IPad 1 and from my MacBook Pro 15"/i7 2 GHz/Mac OS10.7.2.
    It always says the same error.
    I reset the divice again and made a restore, but the same error.
    I change the HDMI cable, same error.
    It works fine before, I had 4.4.1 on it. I'm using a Toshiba Beamer MT700.
    Need some help

  • X1 Carbon 3rd.gen Chrome crashes on Youtube videos after Intel HD Graphics Driver 10.18.14.42 update

    Hi!
    Chrome crashes at Youtube videos after Intel HD Graphics Driver 10.18.14.4206 update on Lenovo X1 Carbon 3rd.gen. Since the driver update yesterday, laptop starts suddenly to overheat enormously and become super-noisy as soon as I try to open a Youtube video , no matter on Youtube page, or a external provider with embded youtube video. Chrome becomes unresponsible and has to be terminated. Laptop continues to use fan at extreme level for abot 20 more seconds and then cools down. IE plays youtube videos without problem and all the other videos from Facebook i.e. are playing. Tried original and also Beta version of Chrome, which doesn't help.
    Kind regards,Daniil

    Hey guys, T450s user here. I think I found an even better workaround for this issue without having to disable hardware acceleration and lower the performance of Chrome as a whole. After long trial and error I found the that driver-related issue is generally narrowed-down to HTML5 acceleration for video playback. By installing the following Chrome Extension I was able to revert YouTube back to the old Flash-based YouTube player and now even 4K playback is absolutely stellar on my T450s running the latest .4222 driver directly from Intel's site! https://downloadcenter.intel.com/download/24964/Intel-Iris-Iris-Pro-and-HD-Graphics-Driver-for-Windows-7-8-8-1-64-bit This is of course by no means a fix of any kind but I think it is the best workaround that we have to this date without having to sacrifice performance in Chrome as a whole. Try it out guys! https://chrome.google.com/webstore/detail/disable-youtube-html5-pla/enmofgaijnbjpblfljopnpdogpldapoc?utm_source=chrome-app-launcher-info-dialog

  • Updating Video after sync

    After I sync and go to "Videos" I get the message "Updating", after the update is complete the movies play fine. I just don't recall this happening before.
    Any ideas from anyone?
    Thanks

    Found it Phew!!!

  • Problems with ITMS Videos after 1.1 Update

    OK, so there are lots of posts about video problems on 5G ipods after software update 1.1 and what encoding methods were used etc etc.
    After updating my 60GB iPod to 1.1 all my videos, including those purchased from the iTunes Music Store, suffer from audio problems.
    The video playback is fine, no freezing like others have mentioned, but I get loud popping and clicking sounds on the audio, particulalry at the start of a clip.
    Has ayone else experienced problems with video sound after the 1.1 update?
    Restoring to software 1.0 resolved the problem so there is definitely a problem with 1.1 and ITMS content.
    Apple need to sort this out. Fast.

    I foolishly did the 1.1 upgrade to my 60G iPod. I found that, as we all know by now, that all ov my videos that weren't from Quicktime Pro or purchased through iTunes hang after about 30 seconds, and then continues without any audio. But, the really obnoxious part is that my videos that I converted via QuickTime Pro suffered from very strange audio artifacts. These would fall into the category of clicks, purrs, warbles and other strange noises in addition to the audio that is supposed to be there. That pushed me over the line, and I "downgraded" my iPod back to release 1.0. I did the "restore" to completely erase my iPod and then re-loaded it from iTunes. I had already upgraded iTunes, and it has no problems with my now-restored-to-version 1.0 iPod. By the way, you have to edit a system file in order to do the downgrade: Put the ipod in harddisk mode. Edit the file (hidden folder and file) \iPod_Control\Device\SysInfo Replace the line that have the word "buildID" with this line:
    buildID: 0x05908000 (6.0)
    Then run the original iPod Updater to put 1.0 back onto it. This will leave you with the "feature" that any video that you change the Video Kind to TV Show will not show up on your iPod unless it's in a Video Play List. I actually like this, as it keeps the Video list from being cluttered up.
    Sony Vaio PCG-U1   Windows XP Pro  

Maybe you are looking for