No video after windows 7 update

I haven't update my windows for couple of months but today I decided to update it and after updating and restart, the screen is blank. I could hear my skype turn on and everything else, but I couldn't see anything on my MacBook Pro unibody. So I log into my computer using logmein and I try to change the resolution but that part wasn't in there when I go to the video properties. It looks like that it could detect that there's a video card on it. I uninstall the the video driver and the screen turns on but when I install the driver back, the screen is blank again. I tried to download the lastest driver on nvidia website but that didn't work. So right now I roll back to the point where I knew the video was working and I'm waiting for a solution for this fix. I've been search everywhere for it but I don't see people have the same issue as mines.

Oh, I forgot to mention. The Windows 7 is 64 bit version.

Similar Messages

  • Dell Latitude E6520 fails to boot after Windows Updates

    Hello, 
    I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
    a recovery disk and run: 
    dism /image:D:\ /cleanup-image /revertpendingactions
    This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending: 
    kb2982378
    kb2978742
    kb2977629
    kb2976897
    kb2973112
    kb2972211
    There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
    2014-09-18 10:52:04:214
    496 540
    AU Install complete for all calls, reboot  needed
    2014-09-18 10:52:04:216
    496 540
    AU Successfully wrote event for AU health state:0
    2014-09-18 10:52:04:623
    496 8a4
    AU UpdateDownloadProperties: 0 download(s) are still in progress.
    2014-09-18 10:52:04:623
    496 8a4
    AU Triggering Offline detection (non-interactive)
    2014-09-18 10:52:04:623
    496 8a4
    AU AU setting pending client directive to 'Reboot Pending'
    2014-09-18 10:52:04:623
    496 8a4
    AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
    2014-09-18 10:52:04:625
    496 8a4
    AU Successfully wrote event for AU health state:0
    2014-09-18 10:52:04:625
    496 1668
    AU #############
    2014-09-18 10:52:04:625
    496 1668
    AU ## START ##  AU: Search for updates
    2014-09-18 10:52:04:625
    496 1668
    AU #########
    2014-09-18 10:52:04:626
    496 1668
    AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
    2014-09-18 10:52:04:626
    496 166c
    Agent *************
    2014-09-18 10:52:04:626
    496 166c
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-09-18 10:52:04:626
    496 166c
    Agent *********
    2014-09-18 10:52:04:626
    496 166c
    Agent  * Online = No; Ignore download priority = No
    2014-09-18 10:52:04:626
    496 166c
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-09-18 10:52:04:626
    496 166c
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-09-18 10:52:04:626
    496 166c
    Agent  * Search Scope = {Machine}
    2014-09-18 10:52:05:210
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:07:170
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:09:475
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:09:569
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:11:590
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:14:999
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:16:887
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:18:753
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:19:623
    496 1668
    Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
    2014-09-18 10:52:20:673
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:22:573
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:22:773
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:24:464
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:24:651
    496 1668
    AU AU received handle event
    2014-09-18 10:52:26:366
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:27:520
    496 1668
    Shutdwn user declined update at shutdown
    2014-09-18 10:52:27:520
    496 1668
    AU Successfully wrote event for AU health state:0
    2014-09-18 10:52:27:520
    496 1668
    AU AU initiates service shutdown
    2014-09-18 10:52:27:520
    496 1668
    AU ###########  AU: Uninitializing Automatic Updates  ###########
    2014-09-18 10:52:28:206
    496 166c
    Agent  * WARNING: Exit code = 0x8024000B
    2014-09-18 10:52:28:206
    496 166c
    Agent *********
    2014-09-18 10:52:28:206
    496 166c
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-09-18 10:52:28:206
    496 166c
    Agent *************
    2014-09-18 10:52:28:206
    496 166c
    Agent WARNING: WU client failed Searching for update with error 0x8024000b
    2014-09-18 10:52:28:253
    496 1668
    Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
    2014-09-18 10:52:04:216-0600 1
    193 102
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Content Install
    Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates:  - Security Update for Windows 7 for x64-based Systems
    (KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
    (KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
    for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
    for Windows 7 for x64-based Systems (KB2978742)
    2014-09-18 10:52:28:253
    496 1668
    Report CWERReporter finishing event handling. (00000000)
    2014-09-18 10:52:28:253
    496 1668
    Report CWERReporter finishing event handling. (00000000)
    2014-09-18 10:52:28:425
    496 1668
    Service *********
    2014-09-18 10:52:28:425
    496 1668
    Service **  END  **  Service: Service exit [Exit code = 0x240001]
    2014-09-18 10:52:28:425
    496 1668
    Service *************
    Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.

    Hi ChristianBoman,
    We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
    http://windows.microsoft.com/en-us/onedrive/share-file-folder
    for the update error 0x8024000b,  please refer to the following article.
    http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
    Please take the following steps:
    1. Run the Windows Update Troubleshooter.
    2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
    3. Copy the following text, and then paste it into the Run text box:
    Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
    4. Click OK.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • SP 2010 - Getting "An unexpected error has occurred. " message when accessing Sharepoint site after windows update - Windows 7 Home Premium

    Hi,
    I am new to SP 2010. I have installed Share point 2010 server (trial version) on my Windows 7 Home Premium Laptop by following the below link.
    http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
    Everything went fine and was able to see the new sharepoint site after completing configuration wizard. SP2010 Central Admin also worked fine.
    However, after windows update, sharepoint site is not working. I was able to see the site working for more than a day before windows update. SP2010 Central Admin is still working. Executed "PSCONFIG" after
    update but still no good.
    I saw a warning "The Security Token Service is not available" in Central Admin and did some research to fix the issue but nothing worked. 
    Hotfix
    I believe I have all hotfixes mentioned in the forums. Here is the list.
    Windows6.1-KB976462-v2-x64
    Windows6.1-KB982307-x64
    Synchronization
    Windows6.1-KB974405-x64
    MSChart
    SQLSERVER2008_ASADOMD10
    381569_intl_x64_zip
    Windows6.1-KB976462-v2-x64
    Event Viewer
     I can see following log in Event Viewer when accessing site home page.
    Event ID:      8306
    Task Category: Claims Authentication
    Level:         Error
    Website response
    http://localhost:32843/ - "HTTP Error 503. The service is unavailable." 
    http://localhost:32843/Topology/Topology.svc - Works fine
    http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc - Returns following error. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security) and IIS website (SharePoint Web Services
    -> IIS -> Authentication).
    HTTP Error 500.0 - Internal Server Error
       Module "WindowsAuthenticationModule" could not be found
    I even tried to uninstall Sharepoint and re-install the same. It worked even second time until it went thro' windows update. App pools are running and Websites are up and running in IIS.
    Can anyone please help me to fix this issue? 
    Thanks

    Hi Henrik,
    Here is the log info.
      <EventID>8306</EventID> 
      <Version>14</Version> 
      <Level>2</Level> 
      <Task>47</Task> 
      <Opcode>0</Opcode> 
      <Keywords>0x4000000000000000</Keywords> 
      <Execution ProcessID="8436" ThreadID="8812" /> 
      <Channel>Application</Channel> 
      <Security UserID="S-1-5-20" /> 
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
    bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal
    Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;}
    pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px
    4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;f'.
    I would like to let you know that I am getting following message when accessing the below link.  I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security)
    and IIS website (SharePoint Web Services -> IIS -> Authentication).
    http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
    HTTP Error 500.0 - Internal Server Error
       Module "WindowsAuthenticationModule" could not be found
    Regards

  • Can't steam video after latest update on my I pad mini!

    Can't steam video after last update on I pad mini . Video loads very slow and keeps dropping out it was fine before the update!!!

    If it's showing a different Apple ID, you need to either update them from that Apple ID or delete and redownload them when signed into a different one, which may require repurchasing paid applications.
    (109113)

  • Windows Update Error 800B0109 after Windows Update Agent 7.6.7600.320 Installed

    Hi, I have this error message when running windows update, it happened after Windows Update Agent 7.6.7600.320 installed.
    Any idea how to resolve this?
    Thank you.

    Hi，
    Please make sure that your antivirus application does not scan the files in the
    %windir% \SoftwareDistribution directory on any computer on which Windows Update Agent is installed.
    You can also temporarily turn off the antivirus application and check the result.
    Or run the following commands, and press Enter after each command:
    Net stop wuauserv
    cd %systemroot%
    Ren SoftwareDistribution SoftwareDistribution.old
    Net start wuauserv
    Try to install updates again.
    Yolanda Zhu
    TechNet Community Support
    I tried the commands as well, still prompting the same error.
    Thanks

  • Profiles being reset after windows updates?

    Hi All
    I'm having issues with Outlook 2013 SP1 resetting our users profiles after Windows Updates have been applied. Their profiles are being reset whilst their previous profiles are being renamed to "BACKUP of <profile name>".
    Office 2013 x86 has been deployed via VL Media onto Win7 x64 machines and we are distributing the ImportPRF registry key via GPO (set to Update) in order to customise the profiles on first run. (basic email account and attaching a default PST file)
    It appears that after windows updates are applied outlook is triggering the first run process again and therefore resetting the users profiles back to the standard set in our PRF.
    We used this method to configure Outlook 2010 and for the years of deploying Office 2010 we never had any issues. Can anyone suggest what might be going on here or what might have changed in Office 2013?
    Thanks

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Firefox won't start after windows update

    After windows Updated my computer Firefox won't start. I tried a clean reinstall two times, won't work. When I tried to start the firefox the first time after booting my computer it comes with the following message.
    XML Parsing Error: undefined entity
    Location: chrome://mozapps/content/extensions/update.xul
    Line Number 14, Column 1:
    <wizard id="updateWizard"
    ^
    Any Help would be greatly appreciated. I like firefox and I'm using it the last 7 Years.
    Thanks
    DK

    I cheated a little bit and put the issue url in a working version of firefox:
    chrome://mozapps/content/extensions/update.xul
    What I got was a page that looked like this below and console:
    blah blah parser:
    <pre><nowiki> xml-stylesheet
    xml-stylesheet
    <wizard id="updateWizard" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul" title="Firefox Update" windowtype="Addons:Compatibility" branded="true" onload="gUpdateWizard.init();" onwizardfinish="gUpdateWizard.onWizardFinish();" onwizardcancel="return gUpdateWizard.onWizardCancel();" onclose="return gUpdateWizard.onWizardClose(event);" buttons="accept,cancel" pagestep="1" currentpageid="dummy" firstpage="true" lastpage="true">
    <script type="application/javascript" src="chrome://mozapps/content/extensions/update.js"></script>
    <stringbundleset id="updateSet">
    <stringbundle id="brandStrings" src="chrome://branding/locale/brand.properties"></stringbundle>
    <stringbundle id="updateStrings" src="chrome://mozapps/locale/extensions/update.properties"></stringbundle>
    </stringbundleset>
    <wizardpage id="dummy" pageid="dummy"></wizardpage>
    <wizardpage id="offline" pageid="offline" next="versioninfo" label="Firefox is working offline" onpageadvanced="return gOfflinePage.onPageAdvanced();">
    <description></description>
    <checkbox id="toggleOffline" checked="true" label="Go online now." accesskey="G" oncommand="gOfflinePage.toggleOffline();"></checkbox>
    </wizardpage>
    <wizardpage id="versioninfo" pageid="versioninfo" next="mismatch" label="Checking Compatibility of Add-ons" onpageshow="gVersionInfoPage.onPageShow();">
    <label>
    Checking your add-ons for compatibility with this
    </label>
    <separator class="thin"></separator>
    <progressmeter id="versioninfo.progress" mode="undetermined"></progressmeter>
    <hbox align="center">
    <image id="versioninfo.throbber" class="throbber"></image>
    <label id="versioninfo.status" flex="1" crop="right"></label>
    </hbox>
    <separator></separator>
    </wizardpage>
    <wizardpage id="mismatch" pageid="mismatch" next="checking" label="Incompatible Add-ons" onpageshow="gMismatchPage.onPageShow();">
    <label></label>
    <separator class="thin"></separator>
    <listbox id="mismatch.incompatible" flex="1"></listbox>
    <separator class="thin"></separator>
    <label>
    Firefox can check if there are compatible versions…
    </label>
    </wizardpage>
    <wizardpage id="checking" pageid="checking" next="noupdates" label="Checking for Compatible Add-ons" onpageshow="gUpdatePage.onPageShow();">
    <label></label>
    <separator class="thin"></separator>
    <progressmeter id="checking.progress"></progressmeter>
    <hbox align="center"></hbox>
    </wizardpage>
    <wizardpage id="noupdates" pageid="noupdates" label="No Compatible Add-ons Found" onpageshow="gNoUpdatesPage.onPageShow();">
    <description></description>
    <separator class="thin"></separator>
    <hbox id="updateCheckErrorNotFound" class="alertBox" hidden="true" align="top"></hbox>
    <separator class="thin"></separator>
    <description id="noupdatesCheckEnabled" hidden="true"></description>
    <vbox id="noupdatesCheckDisabled" hidden="true"></vbox>
    <separator flex="1"></separator>
    <label></label>
    <separator class="thin"></separator>
    </wizardpage>
    </nowiki></pre>
    I do not see much about coloum 14, but I am guessing this file is stored somewhere and its corrupt. Update.xul suggests that it is the update file. Do you still have this in your downloads folder? There are two places for update and for a clean reinstall:
    [http://www.mozilla.org/en-US/firefox/new/] in a private window will give you a new install or you can choose from here: [https://www.mozilla.org/en-US/firefox/all/]
    This is what the file should look like; [http://hg.mozilla.org/mozilla-central/log/7a2edc5171e6/toolkit/mozapps/extensions/content/update.xul] If you can copy and paste that file from a working browser we can see the issue, but it will just look the same as the error.
    if you can replace the contents of the file locally with what it should look like it will fix the error, but who knows if there are other errors. May be best to delete the updater and save all the profile folder contents.

  • I want to backup my pinned tabs and my bookmarks as they have been lost several times after windows updates

    several times after system crashes and sometimes after windows updates my pinned tabs have disappeared. How can I back up the pinned tabs and bookmarks??

    Firefox stores the bookmarks and the browsing history in the places.sqlite database file..
    There are 10 rotating daily JSON backups (bookmarks-####-##-##.json) in the bookmarkbackups folder within the Firefox profile folder, one for each day that Firefox is started.
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    Pinned (App) tabs and tab groups are stored in the sessionstore.js file.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    See also:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

  • Blue screen: HP Pavilion dv6 after Windows update on Aug 1.

    Last year or so, I had this blue screen issue with my dv6 laptop and was solved by uninstalling KB2670838.And things have been very peaceful since then, but the blue screen re-occured recently after windows update last week.The updates were suggested by HP Support agent installed in and was for getting ready for Windows 10 installation.But my pc gets blue in every 3 min now, so I un-installed all updated job occured last week as temporal solution. Though I wish to be ready for Windows 10 installation, I need to have operable PC for my work.(This is Win7 sp1, home eddition) It would be great if anyone could assist me on this. Thank you, Piko.      

    I have this problem. It happens without any warning. 
    I don't know the reason. Please help me.

  • Wont boot after windows update

    M y Sateite A305 s6916 wont boot after windows updates tried to install.

    Satellite A305-S6916
    tried .. every option on F8
    Try this. Download a repair disc from here.
       Windows Vista Recovery Environment ISO X64 version (64 bit)
    If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
       Startup Repair: frequently asked questions
    Also try a System Restore.
       What are the system recovery options in Windows Vista?
    -Jerry

  • No sound from laptop speakers after Windows update installed Realtek HD Audio

    Laptop is HP6626US with Windows Vista 32 bit SP2.
    I had an error with Windows Update which was recently fixed.  When I ran the update Realtek HD Audio was installed, among many other items.  I now have the red circle white X by my speaker icon and do not get any sound out of internal speakers.  
    The Driver version is 6.0.1.6662
    Direct X version 11.0
    Audio Codec ALC 268
    In Device Manager Under Sound, video and game controllers Realtek HD Audio is listed with Unimodem Half Duplex Audio Device if that is helpful.
    Help Appreciated.

    Hello,PaulM25. 
    I see that you're having an issue with the sound on your notebook. Typically this means the Drivers don't exist and can also be considered as a hardware issue.
    I have a couple of questions for you before we get going. 
    This is your notebook (HP Pavilion dv6626us Entertainment) correct?
    Did this issue occur after you updated the audio drivers?
    Now, you can go ahead and try these steps to resolve the issue. 
    Please completely remove the drivers for the Audio Device in Device Manager and “Control Panel – Programs and Features”.
    Reboot the computer.
    Please check if the device will be installed automatically after the computer starts. If not, please go to Device Manager and then navigate to the Audio Device, right click on it and choose “Update Driver software”
    If the issue persists, please try to manually install the device driver which comes with the computer to see if it works. (You can also go to HP website to install the drivers. If you cannot find it, please give me the detail information of the device or the computer, such as brand, model, etc., I will help you search for the proper driver.)
    THX

  • Blurred video after BIOS update

    Hi,
    I have updated my T520 from version 1.23 (?) to version 1.34-1.19/1.19 and since then I have blurred video in the Sophos Safeguard password screen. Sophos Safeguard is a disk encrypter and gets launched before Windows 7 does.
    Since then I had to enter my password blindly, but I could login okay.
    I thought that maybe an update of the video driver would do the trick. I installed version 8.15.10.2538; only the last for digits where higher than the previously installed version. I did all updates via ThinkVantage System Update btw.
    After that update, I couldn't even enter my password blindly, just reboot. Fortunately after disconnecting my external monitor I was able to login blindly again.
    Before I mess up my system even more...does anyone know what the problem is and maybe how I can resolve it?
    Thanks in advance!
    Best regards, Tom

     Did you hear a small beep every time you started your computer? Do you still hear a beep after a few seconds after you start your computer? Thats usually the beep to indicate that it's loading. If you don't hear that sound, theres not much you can do with that motherboard as the bios is curropt

  • Personas has stopped working after Windows updates. Halp! How do I get personas to start working again?

    Personas was working just fine. A few days ago there was a Windows update (somewhere along the lines of 20 updates). Both our Vista laptop AND our 7 Desktop were updated and now personas doesn't work on either computer . . . with the exception of one user account on the desktop. <--- which is weird, huh?
    We are perplexed. When we mouse over a persona, the font color changes but the picture doesn't. When we wear a new persona again, ''only'' the font color changes but the picture doesn't. It seems to be 'stuck' on whatever our current persona is on the computer. I also tried uninstalling personas and rebooting and . . . the persona picture was still on the computer. More weirdness. I re-downloaded personas after this but the problem persists.
    I've searched and searched and can't find anything on this. My best guess is that it has something to do with one of the Windows updates as several of them were security updates ... but this is only a guess on my part.
    Any help would be greatly appreciated. Let me know what other information I can provide to try and resolve this problem.
    Oh, both machines are running the current versions of Java and Adobe flash. We are running on Firefox 3.6.17 on both laptop and desktop.

    Anyone else experiencing this problem? Anyone have any ideas/suggestions on what to look for to try and resolve this? Thx.

  • "Unable to load data" error after Windows update

    Hi all,
    I've been maintaining a LightSwitch desktop app for a couple of years now.  The app runs on a server and several client machines access it.  Sometime in the last few months, any client that has Windows Update enabled has failed to load data.  Instead
    it shows red crosses where the data should be and the tooltip, "Unable to load data. Please check your connection and try loading again."
    Other clients that don't have updates enabled are fine.  Has anyone else run into this issue?  Does anyone know how to resolve it?
    Thanks,
    Liam

    Hi Angie,
    Thanks for your reply.  I've enabled diagnostics as described.  Here's what I find.
    When I load my LightSwitch screen, I get the following entry highlighted red in Fiddler:
    GET http://127.0.0.1:6853/callback.json?_=1377245349573
    502 Fiddler - Connection Failed (text/html)
    GET http://127.0.0.1:6853/callback.json?_=1377245349573 HTTP/1.1
    Host: 127.0.0.1:6853
    Proxy-Connection: keep-alive
    Accept: application/json, text/javascript, */*; q=0.01
    User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.57 Safari/537.36
    Accept-Encoding: gzip,deflate,sdch
    Accept-Language: en-GB,en;q=0.8
    HTTP/1.1 502 Fiddler - Connection Failed
    Date: Fri, 23 Aug 2013 08:09:10 GMT
    Content-Type: text/html; charset=UTF-8
    Connection: close
    Timestamp: 09:09:10.584
    [Fiddler] The socket connection to 127.0.0.1 failed. <br />ErrorCode: 10061. <br />No connection could be made because the target machine actively refused it 127.0.0.1:6853
    After that, I see a long list of each of the queries LightSwitch is calling for all the elements on the screen.  Each one contains the following error:
    HTTP/1.1 200 OK
    Cache-Control: no-cache
    Pragma: no-cache
    Content-Length: 747
    Content-Type: application/msbin1
    Expires: -1
    Server: Microsoft-IIS/7.5
    X-AspNet-Version: 4.0.30319
    X-Powered-By: ASP.NET
    Date: Fri, 23 Aug 2013 08:10:38 GMT
    @Fault5http://schemas.microsoft.com/ws/2005/05/envelope/none@Code@Value�Sender@Reason@Textxmllang�en-GB��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@Detail@DomainServiceFaultDomainServices i)http://www.w3.org/2001/XMLSchema-instance@ ErrorCode�@ErrorMessage��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@IsDomainException�
    Can you help in interpreting these?
    Thanks,
    Liam

  • Browser cache ignore no longer works after windows update

    Just thought I'd share that after the windows update I did
    this week, the browser cache blocking trick described in many
    places where you put ?r=<randomnumber> at the end of a URL no
    longer works. Not exactly sure what happened, but it now causes a
    URL not found error, at least for me when I'm loading local files
    off my disk.
    This thread talks about the cache blocking trick:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=665&threadid =1357763&highlight_key=y&keyword1=cache

    Here's a technique I use. In a php file:
    header("Expires: Mon, 20 Jul 1997 05:00:00 GMT");
    header("Cache-Control: no-store, no-cache, must-revalidate");
    header("Cache-Control: post-check=0, pre-check=0", FALSE);
    header("Pragma: no-cache");
    This must be wrapped in php tags.

  • Win7 BootCamp won't start up after Windows Update

    I been using Win7 with Bootcamp for over 8 months now and no problem but last night I shut down with a windows update and this morning it can not start up at all.  I just get a black screen.  I can select and enter my OSX drive no problem, even access the Boot Volume and copy files off it to my Mac partition also.  Holding option key on startup shows my two dirves also.  Is there anyway to revert back to old version of Win7 on startup or do I have to reinstall everything again?

    Did you let the update complete? or shutdown while some of the update was still to be completed. A lot of it is done and completed after a restart.
    Start getting into making sure you have free space, using restore points (you may need to boot from the DVD). You can also rollback an udpate to driver or uninstall.
    There are always and will be 2nd Tues of the month critical security update in two days. The only Windows Update I've seen are to Microsoft Security Essentials. Maybe 3rd party issue?
    I use CCleaner 3.0 on a daily basis to clean out temp files.
    (you are running Windows, Boot Camp, no, that was/is drivers and partitioning tool, nothing else). Do you use a VM also? makes it sound like you might. Updates are best done running Windows natively, that is about as close as I can make it to what people keep referring to as "running Windows on Boot Camp" is just Windows running, not as a guest OS VM.

Maybe you are looking for