No Video Decoder available for this stream type (DVD Error -47003)
Hi all,
I am so confused, I have never had these sorts of issues before, now nothing works. In premiere pro I export a video as Microsoft DV/AVI, the compressor is DV(NTSC), pixel aspect ratio is D1/DV NTSC (0.9). Audio is uncompressed 48000Hz, 16 bit sterio.
When I import into Adobe Ecnore 1.5, all is fine untill I try to place chapters into video, no video in monitor window, and when I preview the whole thing and click on one of the buttons in my project I get the following error (Video Decoder available for this stream type (DVD Error -47003), and the screen is black.
Any help would be great.
Anthony
PPro/AME is using the Main Concept Encoder - in the Format menu there are three varieties of MPEG2 - but of course, they are not QT and I was being sloppy (and ignorant) in my description!
I have now tried as well, per your suggestion, DV AVI and uncompressed AVI, both generating the same error unfortunately - and again I tried an Animation QT, but same again.
The most bizarre thing is that the odd clip that does work I now find is 768x576 - I really can't understand why Encore is even letting that through the door, never mind previewing it. I just tried deliberately exporting one from PPro, but of course as expected Encore said it was the wrong size.
I rolled QT back to 7.1 - same error. Could roll back further I guess.....
The reliance on QT movies is largely my preference and habit I guess - all my work is cgi. In the first instance image sequences taken into After Effects for comp - writing them out from there as QT movies uncompressed/Animation, or Sorenson 3 for client preview is just something we are used to.
It does suck but I am close to resigning myself to following your suggested route of burning RW discs and testing them that way - annoying and frustrating.
One thing I have left is to move Encore to my other machine, a leaner and faster box that I use for my 3D work - as there's less on it perhaps it may be easier to pin down what is breaking the preview.
I have found reports of this error going back to 2005, but no solutions - like the first two posts, people seem confounded and unable to pin down a reason for it. Adobe's knowledgebase contains no result when I enter the exact error line either.
I'll see what I can find and come back to this thread with results positive or negative. Meantime I suppose I might be looking at upgrading after all....the problem is I have sufficient Adobe products that I should be, for economy sake, looking at one of the suite upgrades - I've already seen that's around £1,300, which firmly puts me between the proverbial rock and hard place!
Your help, Jeff, is much appreciated and I will post back on this thread when I have something, hopefully within a day or two.
Julian.
Similar Messages
-
OSD Task Sequence fails with "There are no task sequences available for this computer"
Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell. -
"don't have a plug-in for this MIME type" - what can I do?
I am a new Mac user and am finding that I can't access a lot of content on the web due to the error that says a certain page "has content of MIME type...(fill in the blank) and because you don't have a plug-in installed for this MIME type, this content can't be displayed."
It is very frustrating because I can't quick upload pictures on Snapfish or open pretty much most video clips on the web. What good is my fancy new Mac if I can't do this stuff anymore?!
The Mac people suggested I switch browsers from Safari to Firefox, but that did not help. Any suggestions?Yes, I have installed Snapfish's quickupload. I have gone through the upload and install process a few times, so I know that it has been installed. For some reason, I still get the error message I quoted above. On other websites, I just get the error message with no option to install any sort of plug in. Still stuck!
-
Err "Only absence less than 1 day are allowed for this absence type
Hi Experts,
When I am creating IT2001 record for EL an error is coming, "Only absence less than 1 day are allowed for this absence type". Although Counting rule is defined properly and in check for Condition of absence <1 day & full day both are checked.
Regards,
TomeshHi Nalla,
The remaining amount for Casual leave is not updated even after we apply the casual leave .
Suppose there are 20 CL quotas available. If we apply for 2 CLs then remaining should be 18.
Regards,
Tomesh -
Is their a trial version of Premier Elements Photo & Video 11 available for downloading?
Would love to try out these new products before purchasing. Thank you, Sharon
Thank you! Is there also a trial version for the Video Elements? This link seems to only provide download of the Photo Elements. Thanks in advance fro your assistance,Sharon
Date: Tue, 23 Apr 2013 13:42:24 -0700
From: [email protected]
To: [email protected]
Subject: Is their a trial version of Premier Elements Photo & Video 11 available for downloading?
Re: Is their a trial version of Premier Elements Photo & Video 11 available for downloading?
created by A.T. Romano in Premiere Elements - View the full discussion
sharonNbrem The following link should get you the Adobe Photoshop Elements 11 and Adobe Premiere Elements 11 free 30 day tryouts.http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements &loc=usPlease check it out and let us know the results. It is my opinion that the best way to go is the free tryouts before purchase to make sure that the programs are compatible with your computer environment and that the features meet your photo and video editing needs. ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5261938#5261938
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5261938#5261938
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5261938#5261938. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
SharePoint 2013: A web analytics report is not available for this site.
Hello,
I have SharePoint Server 2013 and the enable usage data collection is enabled. There is usage logs and data being generated, but SharePoint says there is not data available.
A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
not been processed yet.
What can I do?
Thanks,
Paul
Paulhi,
Web Analytics is now part of the 2013 Search.
You can refer the below links, :
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html
if you wanna use API, there is a blog,which talk about the same:
retrieve Search Analytics Reports
using SharePoint 2013 API:
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/ -
problem updating to iphoto 9.6 after upgrading to Yoesmite I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc
"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If iPhoto is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/ -
I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!
It started after the major update to iOS 7.
I can't believe that this is so hard to do. It's just not letting me. I can add a bookmark to the home screen just fine, just not in a bookmarks folder anywhere I try.
I've used Apple products since 2001 and have always loved how intuitive they are. But the Safari browser since iOS 7 has been the worst I've experienced. At least right in the beginning after that update.
I'd really appreciate any help that doesn't just tell me how it's suppose to work...I know that.
My iPad 4 is not affected with the problem and works as it should.To delete, tap "Edit" (tap to enlarge image)
-
I can't update my iPhoto. "Update is not available for this Apple ID".
Updating my iPhoto has always been a problem. When I try, I get the error of: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
This is the only apple ID I have ever owned, and now that I updated my Mac with the new software, I can't even OPEN iPhoto anymore. Now I can't view any of my photos and I am not a happy camper..
How can I fix this problem?????
Thanks in Advance!Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.
-
Valid size not available for this creation when using Greeting Card feature
Using PSE9 with a Mac. When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
"Valid Size Not Available For This Creation". (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working). I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result. Has anyone else run into this problem, and if so have found a fix? Thanks.I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
Copy your Photoshop project files (and any folders) to your mac.
Open the project files as you would with any other Photoshop file.
You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
Good luck. -
There are no active responsibilities available for this user
Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
BalIs the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini -
Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.
Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.
-
I can't update iMovie, Garage Band, Numbers, Pages, Keynote, and iPhoto. on my new Mac Air. 11". I had hoped when I updated to OS X Yosemite that would solve the problem. It didn't. I get this: This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. I went to the app store, as was suggested in someone else's post, using the only ID I've ever had, and went to the purchases tab, to "accept" the apps. That didn't work, because they weren't there to 'accept'. They did come with my purchase, however. Please advise.
It appears Best Buy is up to their old tricks of palming off returned units as new. Take it back for a complete refund of your money. If they give you any static escalate your problem to management immediately.
-
macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.
I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/ -
When trying to perform updates I get this message: This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. What do I do? I just bought the MacBook Pro new and migrated my apps from my old MacBook Pro.
Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept them into your Apple ID, do so.
2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
3. Click here, contact Apple, and wait for a response.
4. Buy them.
(116300)
Maybe you are looking for
-
Problem with IDoc for an outbound delivery
Dear All, I am facing a problem with the IDoc defined for an outbound delivery. Scenario: Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N). What I did: I implemented the EXIT_SAPLV56K_00
-
Creation of Assets for Capital Investment Measure
Hi, Can some please tell me how to create an Asset for Capital Investment Measure.
-
Now that the photo gallery in MobileMe is ending, is there another photo sharing site to which existing iPhoto albums can be transferred as is, with photos in the same order and with titles, and with minimal problems?
-
how can i exprt to adobe ... please help thanks
-
I have a problem with syncing my photos. Whenever I choose an album to sync photos from, the photos appear in my iPhone in two albums , Photo Library and My Pictures (the name of the folder frow which I have sync the photos). How can I fix that??