No video displayed when making movies using Vado third generation

I have windows xp with sp3 installed. I am able to make movies using the create movie function in vado central. However, when I play back the video (this is a wmv file), only the audio is available. The screen is blank. Any suggestions?
Thank you

Hi
Yes I can play audio on time line no prooblem..

Similar Messages

What format camcorder for video editing. Making movies?

My 14 yr old son is into making movies. He needs a better camcorder. He makes stop motion movies as well as scripted movies with props. He edits them on his computer and some are really good, especially after he ads special effects to them.
I want to get him a better camera for filiming. Preferrably not over $600 or so. What is the best format video camera for editing on the computer and one that is good for shooting movies. It should have a spot light on it I assume for low light contitions, even though he sets up lights sometimes when he shoots.
Any suggestions as what I should get him? Thanks in advanced.
Aranon

The HF200, along with all other decent high definition camcorders that use flash memory, DVDs, or hard drives, uses AVCHD. And yes, AVCHD is difficult to work with for two reasons:
1) Many software packages didn't/don't support it, but this has changed dramatically in the past year. Apparently Windows Live Movie Maker in Windows 7 supports it. (Not in Windows Vista or earlier.)
2) It requires a lot of CPU power compared to what systems are currently capable of to work with, just like standard definition video did back in 1998-2000. This will also get easier over time.
Both of the above are the price you pay for being on the cutting edge in terms of video quality.
Tape-based HD camcorders use HDV, which is MPEG-2 based. This is somewhat easier to work with, but I would not reccommend a tape-based camcorder (motor noise, ruggedness, cost of media, etc.)
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Garbled audio when exporting movies using iMove 09

Hello,
Whenever I try to export my Movie using iMovie 09, certain scenes have garbled audio.
The scene play properly within iMovie 09.
It also has the same garbled audio when I try to share it to iDVD.
Any suggestions?

There is a well known audio glitch in iMovie '09. If making speed changes to your project, such as slow or fast motion, you must use only the presets shown on the speed slider. These are: 12.5%, 25%, 50%, 100%, 200%, 400% and 800%. Do not use custom speeds, by manually entering your own percentages.
If you don't use the presets, you are highly likely to see audio problems in the exported project. As you have noted, the glitch appears only in the export but is not evident in preview (within iMovie).
The only fix (other than going through a convoluted process) is to adjust all custom speed changes to the presets. This is a nuisance, of course, as you may have to resync the video and audio where you have added voiceovers or music tracks.
John
Message was edited by: John Cogdell

Making movies using Java

Hi,
I am trying to make movies using Java, and naturally with Java Media Framework it is doable. However, it is a huge overhead to my tiny tool to be distributed over the Internet, and also makes the program very hard to install for my end users, so I cannot use it.
In essence, what need to do is to take a series of jpeg images generated by my program, and convert them into a movie. Preferably to mpeg-1.
It only needs to work on Windows platforms, so I have been looking for a command line tool I can call from my Java program that will automatically compress the jpeg files.
Do you have any pointers? Help would be greately appreciated, as I have been looking near and far for such a program.
Thank you...

Although I can't offer any help, I'd be interested to see where you go with this topic. I had a request for a program to sequence JPEG and TIFF images (taken from a E.Microsope) into movie sequences a while ago. Similar kinds of limitations. Are there any C libraries in existance that you could call into using JNI?

Problems with distorted frames when making movies in After Effects

I'm a 3D animator. When I get through with
rendering all of the frames of an animation and they're fine, I create a preview in After FX and it builds and plays back the preview fine. But when I go to make a movie, with those same frames, it produces frames in different spots which are blurred, stretched, distorted, spun and or dropped. What could be causing this? N E help is greatly appreciated.

There MUST be a simple answer to this problem....
There is a simple answer indeed.
Here it is:
The highlighted button in the Comp panel enables Pixel Aspect Ratio (PAR) Correction.
So, instead of stretching the footage horizontally, you create a Composition with the same frame aspect and Pixel Aspect Ratio as your source footage (just drag the clip to the New Comp button in the project panel and AE will automate this) and then enable PAR correction and After Effects will give you a corrected (deanamorphized) preview so you won't see it squeezed at all on a computer monitor. When you export it, it will look squeezed until you take it to the target video application. Any professional video application will handle this correctly.Millions of people do this every day, since non-square pixels are still dominant among the most popular video formats.
Even Photoshop has had support for non-square pixels (and PAR correction in the document panel) since CS (ie. Photoshop 8.0).
Note that when you turn on PAR correction (just like when you use odd magnification levels) AE switches to a draft filtering mode, which makes type and other elements look a bit jagged. Don't worry, it's just a preview.
The ideal solution, and the one video professionals rely on, is adding video output hardware to your computer, so you can connect a professional video monitor. After Effects can provide a live preview using such a set-up.
For more information on PAR, see Pixel aspect ratio and frame aspect ratio in After Effects Help.

The quality of the video decreases when the movie is exported

I am creating a video series for a product that is about to launch. The video was recorded on an iPad. When I exported the finished video, the color quality went way down. When I watch the footage in iMovie, the video clips and the .jpeg slides that were created in Photoshop look great, very sharp. When I watch the exported movie in iTunes, the color quality is terrible. the picture becomes blurry. Red is a main color of the movie, now it looks very pale and it lost it's sharpness.
How can I improve this?
I did also export it as a Quicktime MP4, and the quality was a bit better. Still not good enough to launch the product.
Also, I am working with iMovie '08 on my iMac running on OS X 10.6.8. Is there any upgrade that I can get to enhance this problem?
Thanks

There are a couple of issues.
First: The Aperture images used in iDVD are the Aperture PREVIEW images; you need to go into Apperture's preferences and increase the size of the preview images (Preference>Previews). A better solution (in my opinion) is to actually export the image from Aperture at a reasonable size (for NTSC, something like 854x480; for PAL, 1024x576) to a folder on your desktop and use THOSE exported images.. Note that going to larger sizes won't give better quality - and may, in fact, slightly reduce the quality because of the Quicktime interpolation that will be required in iDVD.
Second: DVDs are low resolution devices (like 640x480 pixels for NTSC) and can not maintain small type. See http://homepage.mac.com/prof_pixel/text_test_iLife09.html for an experiment I did a couple of years ago for some type size examples.

Video distortion when importing MOV file into Premiere Pro

On my mac my premiere is having issues when I import .Mov files. I was shooting on my Canon 70D DSLR at 30frames and when I import files the playback breaks up and is distorted at various points. It doesn't seem like all the files are doing this only some of them have this problem when they are imported. The footage was all shot under the same settings in the same 3 hour period. I tried exporting files and the distortion is still present in the exported media file. I've attached a screen shot of what it looks like.

Interesting that it's on the same frames ... have you certain effects that would impact those more than others?
Also ... only 8Gb RAM, sounds like one internal that's pretty much stuffed, and footage on an external ... PrPro runs a ton of crap through both the CPU & the GPU (depending on what you're doing and how much it "likes" your GPU/Vram) and also writes massive files to the database, media cache, and through the CPU use the OS's system cache typically. You've got a LOT of readin'/writin' going on, and with only 40Gb free there's not a lot of free space for things to be just parked for random access in a moment or two.
Also curious ... what's the connection to the external? USB2 or 3? Thunderbolt? eSATA?
Neil

Is the iPhone 3G supposed to dim or shut of display when phone in use?

Hi,
I had heard that there was a sensor on the 3G that senses when the iPhone is up to your face when in use and will shut off the display to say the battery. Mine does not do this... is there somewhere I have to go to enable this feature... or is the 3G phone not supposed to do this?

The iPhone includes a proximity sensor for when on a call only. This is to prevent accidentally hitting a button on the screen when the iPhone is near your face during a call.
The iPhone includes an automatic lock setting to turn the screen off after a designate period of inactivity, but this setting has nothing to do with the proximity sensor used during a call.

Flash CS4 on MacOS 10.6.7 crashing when 'test movie' used

Hi all,
I have a MacBook Pro running Mac OS 10.6.7. I am using Flash CS4 10.0.2.
I recently upgraded computers from another MacBook Pro, and installed the same version of CS4 on this new one.
However, given this new computer has lots more RAM and more grunt and is by far less 'clogged up' than my old one (which was about three years old) it crashes all the time when I press CMD-ENTER to test my movies in Flash.
These are FLA's I've worked on for months on my other computer. When I open the SWFs in Flash Player (i.e. outside the authoring environment) I do not get any crashes.
I have noticed the CPU rockets upwards to 100% just before the crash (and hovers around 80% even when nothing is moving on the screen etc). It doesn't do this in the Flash Player.
I have scoured the web and can't seem to find what the problem might be. They're known good FLAs (i.e. they worked on my other computer in the same version of Flash) and this computer should definitely be able to cope with them, given the old one did. What might be the cause?
Here's an example of the error report that Mac OS throws up after the crash:
Process:         Adobe Flash CS4 [43416]
Path:            /Applications/Adobe Flash CS4/Adobe Flash CS4.app/Contents/MacOS/Adobe Flash CS4
Identifier:      com.adobe.flash-10.0
Version:         10.0.2.566 (10.0.2)
Code Type:       X86 (Native)
Parent Process: launchd [146]
Date/Time:       2011-06-15 15:14:43.937 +1200
OS Version:      Mac OS X 10.6.7 (10J4138)
Report Version: 6
Sleep/Wake UUID: 85F82BE0-C1EA-43C7-9A7C-77DA38363765
Interval Since Last Report:          177155 sec
Crashes Since Last Report:           10
Per-App Interval Since Last Report: 89418 sec
Per-App Crashes Since Last Report:   10
Anonymous UUID:                      C8B710B0-DB36-428D-834D-975007911DCD
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000ff1c9680
Crashed Thread: 41
There's more info in the report but I imagine this is the significant bit.
If anyone at all can suggest an answer to this problem that fixes it or contributes directly to a fix, I'll send you a thank-you gift of some description regardless of wherever in the world you might be. I'm losing hours and hours of productivity on this.
Many thanks!
G

As you've discovered some applications don't launch correctly using Migration Assistant. In particular Adobe applications like Acrobat or the Creative Suite should generally be newly installed from their install disks.
It's probably because Adobe applications spread their resources between many different files in many different places. They also are serialized (so they won't be stolen) requiring secret serialization files to be installed. Some of that probably isn't being copied in a way that will make it work after migration assistant.

Blank display when exiting X, using NVidia blob

I'm using the proprietary NVidia drivers for my Macbook's 9400M graphics card, and while X can start, it seems to have trouble quitting. I can startx normally, but if I kill X or quit my window manager, the screen will go entirely blank. The system is not actually frozen, because if I issue a "reboot" command while in X, the screen will blank for just a moment (as opposed to showing the console, which it usually does) before rebooting normally. I've also tried to startx from the console, quit the WM, and blindly type "sudo reboot" and my password, after which the computer still reboots. If I blindly type "startx", the display will show whatever's in X as it would normally, but once again blanks when I return to the console. Xorg.0.log says that the server terminated normally.
It seems to me that the console is still present and working, but not doing anything. What can I do to restore its normal behavior while keeping the NVidia binary blob?
EDIT: I might not have been clear on what happens when I first start the computer. The console appears normally before X starts, but it only breaks after X has been started at least once.
Last edited by DrKillPatient (2012-08-26 20:00:35)

> Don't suppose you can think of any workarounds, can you?
Try downgrading if possible. There are some kernel line switches that may help (e.g. acpi=off) but it's all Greek me.
Edit: http://idyllictux.wordpress.com/2010/04 … ed-driver/
Edit 2: http://www.nvnews.net/vbulletin/forumdisplay.php?f=26
Last edited by karol (2010-07-25 17:08:36)

Hub transport raw HTML code displays when iOS client used to send message

Has anyone else encountered (and hopefully fixed) this problem? I use HTML coding to format the signatures for my staff at the hub transport rule level. Here's an example:
 %%CustomAttribute1%% 
%%Title%% 
Tel:   %%PhoneNumber%% 
Fax:  %%FaxNumber%% 
%%Email%% 
<img border=0 width="240" height="62" src="http://wiglefamily.net/CABVI/CABVILogo.jpg" alt="CABVI Logo"> 
               <a href="www.cincyblind.org">www.cincyblind.org</a>
Disclaimer: The information contained in this electronic mail message may be confidential and protected information intended only for the use of the individual or entity
named above. As the recipient of this information you may be prohibited by State and Federal law from disclosing this information to any other party without specific written authorization from the individual to whom it pertains. If you have received
this communication in error, please notify us immediately and destroy the message and its attachments. 
It looks great when I sent from Outlook or even Android mail clients. However, when sent from iOS mail clients I get the following in the signature:
<html>
<body>
Michael Wigle IT Manager Tel: 513-487-4243 Fax: 513-221-2995
[email protected] [CABVI Logo] www.cincyblind.org Disclaimer: The information contained in this electronic mail message may be confidential and protected information intended only for the use of the
individual or entity named above. As the recipient of this information you may be prohibited by State and Federal law from disclosing this information to any other party without specific written authorization from the individual to whom it pertains.
If you have received this communication in error, please notify us immediately and destroy the message and its attachments.
</body>
</html>
As you can see, the raw HTML code shows but the AD variables populate correctly. Any ideas on a solution for this problem?

See this for the pipeline tracing:
http://technet.microsoft.com/en-us/library/bb125198(v=exchg.80).aspx
There's a link in that article that takes you to:
http://technet.microsoft.com/en-us/library/bb125018(v=exchg.80).aspx
FYI, I think you're still a bit confused. Once again you said *from* when you meant *to*! :-)
--- Rich Matheisen MCSE&I, Exchange MVP

Lose display when making a call...

I installed the IOS4 onto my 3GS phone and now when I make call I lose the display and can't get it back in order to see the number pad to dial an extension or even end the call. I have to press the power button twice in order to get the screen back then I can end the call or see the number pad again.
Anyone else experiencing this?

thats a problem with your proximity sensor you can try cleaning above the ear speaker maybe its dirty but other wise head into your local apple store..

Display when making a call

This problem just started...when I talk on the phone and then take the phone away from my ear, there is no display. So, I can't switch to speaker phone or switch to keypad display. I never had this problem before; the display would appear once I took the phone away from my ear. Is this a setting that might have been changed?

thats a problem with your proximity sensor you can try cleaning above the ear speaker maybe its dirty but other wise head into your local apple store..

The "apply" button didn't display when I was using the "write back" option

I followed the "System Administrator's Guide" to configure the write back function, unfortunately,
the "apply" button didn't display. Is there anyone can give some advice? Thanks!

Just to check, did yiou restart the presentation services after placing the xml file?
Is the template name in answers "SetKPIValue" consistent with the .xml file as you mentioned?
Now, if you could try by putting a hard coded value in the update statement as well.
Also, is the location where the .xml file is kept is,
ORACLE_INSTANCE/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obipsn/analyticsRes/customMessages
P.S. Numeric columns must contain numbers only. They should not contain any data formatting characters such as dollar signs ($), pound signs or hash signs (#), percent signs (%), and so on. [Oracle Admin Guide]
Edited by: 855532 on Jul 13, 2011 1:52 AM

Why does firefox hang or not respond when I am using disable third party cookies setting

I have, by process of elimination, realized that when using the setting "allow third party cookies - 'never' ", causing my firefox to hang so much that I cannot use it. I have used that setting "allow third party cookies - 'never' ", for as long as it has been available. Over that last few months, I have been having problems with firefox hanging and getting the message "firefox not responding". It became very annoying, causing me to look for a solution. I read through the kb and tried many solutions. I can now say that when I change the cookie settting to "always" the problem goes away. It is helped only slightly by using the "from visited" setting. How can I fix this? I don't want all the cookies but I cannot surf with this problem constantly.

The problem is that "third party" includes both related servers and advertising networks; the setting is too crude to accomplish the objective of blocking tracking cookies that you don't want.
My compromise is to accept all third party cookies, but set cookie lifetime to "Keep until: I close Firefox." As a result, tracking is limited in time, even if during any given session I can be seen on different sites. (I also use the NoScript extension, so many ads driven by scripts never load.)

No video displayed when making movies using Vado third generation

Similar Messages

Maybe you are looking for