No video is getting to My older 720P TV
I just bought a AppleTV. Hooked it up to my TV (LG RU-44SZ51D DLP) using a HDMI to DVI cable and started setup. I was able to see the interface to enter my Apple ID and adjust settings. It asked if it could do a system upgrade and I said yes. When it restarted my TV it displays a "no video" screen saver. I asked a Apple Genius and he said plug it into your iTunes (on a 27" i7 iMac with current software) and do a restore... no change. I took it back to the store and plugged it into the display TV...works perfectly. Store replaced the HDMI to DVI cable, set up again still the same no signal.
So what could the upgrade do to kill a working connection? My TV is supposed to support HDCP so I don't think that is the problem. And no I am not in the market for a new TV.
I am having the same issue as brian6603. 2 days ago (Nov 15th) I got a new Apple TV 2 a connected it to a monitor using a HDMI to DVI cable. Everything worked just fine. But after the Apple TV 2 did a software upgrade and reboot the connection through the HDMI to DVI cable stopped working. If a use a regular HDMI cable it seems to work just fine.
My suspicion is that with the latest software update HDCP is now turned on all the time.
(btw, I will be using this Apple TV at work to wirelessly project iPads (airplay mirroring) using various displays and projectors)
Similar Messages
-
When uploading videos to iWeb, the video screen gets cut off at the top. It only happens in Firefox, but not in Safari. Has anybody else had this problem?
I'm using pure HTML5 for mobile websites although you need to provide an OGG file for Firefox. See the movie page on this site...
http://mobile.ezmacwebdesign.com/
If you don't have an iPhone, grab the browser handle and drag it to the left to reduce the width to see how it responds to mobile devices' fixed width browsers .
This will play in all modern browsers and on mobile devices. You can use QuickTime Pro for the OGG or OGV conversion or get the freeware Miro Video Converter...
http://www.iwebformusicians.com/Website-Movie-Video/Easy-Movie-Player.html
If you only want to upload an MP4, you can use a flash fallback player and this will cover Firefox and those geriatrics that still use older versions of Internet Explorer....
http://www.iwebformusicians.com/Website-Movie-Video/Flow-Player.html
http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
http://www.iwebformusicians.com/Website-Movie-Video/JW-Media-Player.html
If you use any of the four fallback players above, take advantage of the fact that you can add a poster image and stop the video file from preloading. This makes for a faster page download time.
You can also achieve this using HTML5 by adding preload="none" and poster="URL to the poster image" into the code shown on this page...
http://www.iwebformusicians.com/Website-Movie-Video/HTML5-Video.html -
Auto-rotate video when getting media in premiere elements 8.0
Hi, I am using premiere elements 8.0. When I get media, some of my video clips get automatically rotated by 90 degrees, even though they videos were shot properly horizontally. How do I get this automatic rotation to stop?
rajibpal
I cannot confirm the report of Premiere Elements 8.0/8.0.1 being "buggy" with .mov files or files from cell phone or cell phone like devices. I find it performs on a par with version 12 and others when set up according to certain guidelines. I see no need for you to upgrade to later version unless the later version has a feature that Premiere Elements 8.0/8.0.1 does not.
1. Are you working from the 8.0.1 Update of Premiere Elements 8?
2. Are you running the program with the automatic Background Rendering and AutoAnalzyer features turned Off?
3. Do you have Edit Menu/Preferences/General GPU Playback set for enabled or disabled according to your video card?
There are other generalized Premiere Elements guidelines that I could go into, but I will leave the list as is for now.
As for this photo rotation matter....I have an iPod Touch 4th generation which records 720p video with a variable frame rate up to 30 frames per second. I have no problems importing or editing or exporting those files using Premiere Elements 8.0/8.0.1. I always record from the camera held in the horizontal position. The thumbnails that appear in Windows have the landscape orientation. And, those files imported from the hard drive appear in Premiere Elements in the landscape orientation.
When you have your file on the TImeline and want to correct its orientation, have you right click the video there and selected Rotate 90 Left or Rotate 90 Right?
You should not be losing any quality by rotating a Timeline clip.
If you opt to rotate the clip using Properties Palette/Motion Panel expanded and the Rotation option there, take care to not accidentally adjust the Scale property that is also in that area. If you go this route to Rotate, then selected the clip on the Timeline, go to Properties Palette, and the Motion Panel, expand the Motion Panel, and then adjust only the Rotation feature
a. typing in -90 degrees or +90 degrees as indicated
or
b. moving the mouse cursor over the field to move the values to the left or right
Please review and consider.
Thank you.
ATR -
CS6 to CC2014 after effects video edits getting moved around
Hi,
We are having a weird problem after moving our whole department to CC2014 from CS6. Once we bring open a CS6 project in After Effects CC2014 all the video edits get thrown off by anywhere from 300 to 18000 frames in the actual edit layer window (in the composition the edit cuts are still in the same place). We are shooting on Canon 305XF's using the 50 mbps .MXF format.
When I open the same project in CS6 and CC2014 and look at the footage setting in CS6 the clip says 9403 total frames in the interrupt footage dialog. But when I open the exact same project in CC2014 it says 83160 frames. If anyone has seen this issue can you point me in the right direction.
I really need to have an easy fix for this issue as it is going to effect about 100 large older projects.
Thank you
KeithYeah it is looking like a footage interpretation to me as well but wish there was some kind of auto fix.
The broken process is opening the CS6 .aep with CC2014 .aep.
What will work is opening the original footage edits that I made in Premiere Pro CS6 in Premiere Pro CC2014. Then I save the Premiere Pro CC2014 and import into the .aep CC2014 that was had all the edits that went funky. Since the composition were still the same I was able to replace the old broken edit compositions with the new CC2014 saved versions and now all the footage is correctly imported.
The main problem with this process is how many projects I would have to do this to would make it a total pain. As well I am very worried about such a manual process mistakes being made. -
Need to convert music videos that are tagged as "Movies" and re-rag them as "Music Videos" to get them out of my movies library and into the Music Video folder. Likewise, I have some educational videos that belong in "Podcasts." Help?
Select/highlight the ones that you want to change in your iTunes library, do Get-Info (control-I) and change their Media Kind on their Options tab to 'Music Video' - and then similarly for the podcasts.
-
Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????
It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this. -
A Box has just started showing up that has the following.
get video url
get video URL at current time
Get embed code
report playback issue
get debug info
stats for nerds
about the HTML.5 player
this is on every video on face book. How to fix?I had the same issue.
I had a youtube downloader app that had a plug-in installed on my Home Safari. I deleted that app. and the plugin. Not sure if that was the culprit, but I figured I'd try.Thought maybe some bug crossed over when syncing the two safaris.
Anyway, I ended up unlinking my Mobile Safari to my Home Safari (iPad; iCloud/Safari/OFF)
A prompt will come up asking what you want to do with previously synced data: Delete from My iPad (don't worry, you'll get it back)
Your bookmarks should disappear.
Reset HOME Safari : Safari/Reset Safari (everything checkmarked)
Turn ON the Mobile Safari again (if you want to relink to the Home version) or keep off (and rebuild it from scratch on iPad alone)
Personally, I turned it on, got my bookmarks back then turned it off and pressed Keep on my iPad.
Now the two aren't linked and I have the bulk of my bookmarks back.
There might be variations of this solution so play around with the process and be sure to refresh your Mobile Safari browser on a video clip to see if it takes. -
I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?
System Preferences>Displays
There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen -
When I watch a video I get a green screen. sound is ok
I would like to know how to fix my 6 month old laptop. when I try to watch video I get a green screen
[edited email by Moderator]
This question was solved.
View Solution.wildrosewins wrote:
I would like to know how to fix my 6 month old laptop. when I try to watch video I get a green screen
Hi,
What is the Operating system of your computer ? Are you watchine ONLINE or OFFLINE ? And Please, edit your post: remove your email address.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Is it possible to deconstruct an existing video to get its component parts?
I made a video http://gallery.mac.com/lorna6#100193 years ago from footage taken in about 2000 and 2001. In a prior thread I mentioned having somehow losing the AUDIO component. Well, disturbingly, I went and watched the video from my old iMovie '06 and discovered that it was the video clips that were missing, not the audio. In the picture below, those black frames represent no video to be seen. I think that the exclamation mark in the yellow circle means the same thing or that something went awry.
Here is a picture of the clips in the work space part -- the upper left quadrant, of my iMovie '06 project.
To clarify: I forgot how I made that video because it was so long ago. I know from reading about iMovie '09 that I will probably do more videos on it because it sounds less complex but equally good for the most part.
Someone in this forum, John, encouraged me to go over the highlights of that old video using the iMovie '09 program and I liked that idea........ so you can imagine my dismay when I returned to the program, opened it up, and now see that I lack not the audio, but the most precious video.
Sadly, the original footage is lost due to external hard drive crashes. I might have kept a memory chip that had it but after all these years and me being disorganized, I do not know where it is.
Is there a way that I can use the iMovie 06 video that you see at my Mobile Me Gallery to extract the clips and the audio? Or if not the audio, then at least all of the video clips? *Is it possible to deconstruct an existing video to get its component parts?*
~LI have had a series of iMovie applications but I used them all too infrequently, partly out of Fear of Trying. Now with the iMovie '09 out, I think I can do it. Yes, I know that I made the Cheyenne video with a previous app, but I found it confusing at times, and look now and see how I bollixed it up, losing some clips in ways I do not know.
You (John C.) wrote:
That's a miniDV camera, which uses tape. It's very similar to my earlier camera, as listed in my details below - the Sony DCR-TRV20. I now mainly use a high definition AVCHD Sony HDR-SR7 - that's why I've switched from iMovie HD 6 to iMovie '09.
.......... Lorna says ...........................
John, I call that a Pandoa's Box paragraph up there! First of all, I am left thinking that the type of videocam that I use will determine which kind of iMovie application I use. Yes? Can I assume that since you with your Sony DC-TRV20 have high definition AVCHD, then my DC-TRV11 might also have it.
I have my user manual in front of me and looked in the Index for both HD and AVC (what is the C in AVC?), and neither is listed. I cannot find anywhere in the manual that tells whether my mini digital TRV11 also has high def AVDHC.
How important is that in using the new iMovie '09? If my Sony does not have it, then does that simply mean that I cannot make use of the HD capability of iMovie '09?
All of this would have been a moot question because earlier I had decided to just use the video component in my Canon digital camera, but then getting my Sony mini digital out and seeing and touching it, and remembering it worked, I began thinking that maybe I should use the camera video for when I am away from home and the Sony for when I am here at home.
There is one thing I would say about HD: It is a memory gobbler, and if you make videos for YouTube, you might feel the constraints within that platform. It might be better for showing things to family and friends on your home tv with no megabyte or time restrictions.
You/John C. continued writing:
Your thoughts on archiving and backup sound sensible Lorna. I must admit, I don't backup as often as I should. I've been using the old Apple Backup program, but am considering moving to Time Machine, with an appropriate hard drive to match - maybe Time Capsule like you are using.
.......... Lorna says ...........................
John,if you decide to get Time Capsule to work wirelessly and continuously with Time Machine, then I suggest you consider a 2 terabyte capacity. I began using the Apple Back up but found it confusing and ultimately insufficient.
You/John C continued writing:
Currently (as listed below), I have 4 external hard drives - 3 are FireWire 400 and the largest one is FW 800. None of these has ever given me a problem (touch wood) - they are LaCie 120GB (not your favourite!), and 3 Maxtor's - 250GB, 300GB and 1TB. The 1TB drive is RAID enabled, having two 500GB drives in the enclosure, which I'm effectively using as one drive, that is, one is not a mirror of the other - so if one fails I've lost all the data! A good reason for using Time Machine.
.......... Lorna says ...........................
John I still am not clear on what RAID is and I guess I will Google it to find out. What is the purpose of having two separate drives housed in a shell? Is it about saving space? Or is it about ports? Or what?
Of course, if you get the one that was mentioned by someone earlier, than it would warn you when something is about to go wrong and you could act pre-emptively. But that was suggested for a business or a pro, neither of which I am.
You/John C wrote:
As my HD camera is a hard drive model (60GB), I archive the footage to the Maxtor 1TB drive, using iMovie's "Archive All" feature. From there, it's easy to import clips into an Event, which is also stored on the Maxtor - so double jeopardy! I had better get cracking on updating my backup strategy
.......... Lorna says ...........................
I am lost. What do you mean, your HC camera is a hard drive model? And what you wrote sounds like something important that I should understand more precisely. I am thinking that the salesguy at Best Buy was right: I should get yet another hard drive in which to store specifically and only my homemade video stuff, my iTunes, and my photographs. I don't know how I would do that, though, if I want them to be stored ALSO IN MY 2TERABYTE SEAGATE as a double archive.
-L
John -
I am using Premiere Elements 11 Editor (Mac App Store). Ich have my project in the video folder of MacOS X, because after the installation of PRE11 the software forced me to copy the project that I've started in PRE9 to that folder. In the project a list of Video files was already included. The video files are on an external hard drive, plugged with USB 2.0.
After coming back to my project several times later and restarting the software, all links to the video files gets lost and I had to relink them one by one, even when I select more than one and click on Edit/Search Media. With more than 100 video files this is very annoying. Is there a way to bring PRE to the point that it remembers the links? I think this should be the minimum of a video editing software for that price.Welcome to the forum.
With the material on an external, you will need to set the Volume name (like a PC's drive letter, but with differences), to match what it was, when the material was Imported.
When media is Imported, the actual media files are NOT Copied over to the Project, but instead, absolute Paths to the media files are established in lnks to it. If anything changes in the absolute Path, then PrE will find the links broken, and they must be re-established.
On a PC, I could step you through the process of setting the drive letter in the OS, so that it is always the same (that is part of the absolute Path), but on a Mac, I am lost, being a PC-only guy. Others, who are on, and know Mac's, will be able to help you with the Volume name.
Good luck,
Hunt -
When sharing a videos I get a rendering error: -50. Any suggestions?
when sharing a videos I get a rendering error: -50. Any suggestions?
I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work. -
Whenever I log into Facebook and someone has sent me a video I get a green screen and I can't see the video. Please help.
You're welcome. And thank you for marking question as answered. To prevent it from happening again, go to Settings > General > Accessibility, turn off Zoom.
Stedman -
I just downloaded a video in HD, but I found out after the download was over my computer doesn't play HD videos. Is there any way I can return the video and get the SD version, or upgrade my computer so it will play the HD video?
From http://support.apple.com/kb/HT3209
When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page. Conversely, if you purchase an HD video on an unsupported device, the SD version will be downloaded. Then, you will need to download the HD version from your Purchased page. Learn more about downloading previous purchases. -
I just bought a 13" Mac air. Streaming videos from amazon.com stop to load every ten minutes. my wireless internet is fast and a good connection. same video runs fine on my older dell pc.
Entering the URL of an HD version of the movie into the URL line in Safari changes things but does not resolve the problem. Now I see the QuickTime "Q" after about 5 seconds, and shortly after that the QT logo fades and a large question mark appears over it. After that, nothing.
Maybe you are looking for
-
I have erased my Ipad remotely thinking it was stolen. It has now been returned, but I don't want to switch it on and erase all information. Can I reverse the erase? If not, how do I restore the info?
-
Is there any function to change the width of forms'graphic ?
Hi All, Is there any function to change the width of forms'graphic ? May be like set***property. Thanks, ke xiong
-
Dunp in standard SAP CRM transaction?
In Transaction CRMD_ORDER while creating moification order from activation order, inside the ITEM Selection TAB in theOBJECT TAB following dump is coming. Short text More than one radio button active What happened? The current screen processi
-
Key differencess bet'n Altrnative condtion base value and Alternative calcu
Hi All I read many times even though I have dought in pricing where in, differentating Altrnative condtion base value and Alternative calculation type. I know these two are forumalas. I am looking for key differencess bet'n Altrnative condtion base v
-
Simple - with such a LARGE database
the Question becomes, why is there no 'filter' available for 'phrases'. I am not familiar with most groups, but from time to time, I will hear a song that gets my interest - whether from a Movie score or the Radio. MOST of the time the radio doesn't