No video on initial start up HP P7-1207c

no video on initial start up, however after forced shut down video displays normally on second start up. HP P7-1207c

You have not stated which operating system is installed. That is always an important piece of information to provide us.
Try using system restore. Do not use System Image recovery unless absolutely necessary. Choose a restore point dated before the forced shutdown.
Windows 7 system restore from startup
Windows 8 system restore from startup
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done the fan should be slowing down and getting quiet on its own.

Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

Videos stop and start

I've got a fast computer w/plenty of ram. I can watch videos from all other sources perfectly smooth, including Quicktime HD movie trailers.
When I try to watch a video in iTunes it slows my computer down so much that besides the videos stopping and starting, my mouse won't even move smoothly.
It worked fine until a couple of weeks ago.

Phyllis-
One reason is that your internet connection is not fast enough to keep up with the video. You may find that when it gets to the end of the video and has fully downloaded, it will replay without stopping.
Fred

Firefox will not start and open a website from a Thunderbird email link. It will go to a link from Thunderbird once Firefox is open, but will not initially start Firefox and proceed to open the Thunderbird email link.

Firefox will not ''start'' and open a website from a Thunderbird email link. A link from Thunderbird will open once Firefox is ''already'' started, but will not initially start Firefox and proceed to open the Thunderbird email link.

I also have this problem. I cannot open links from a discussion board I frequent nor can I open links from my email. Also after opening my email, I cannot go to any other sites except my home page. I can then go no where else.
When I close Firefox and try to reopen it, it does nothing! I have to bring up the Task Manager and end the Firefox process before I can get back in.
To the best of my knowledge, this problem started with the new update to Ver. 3.6.9. I am running Windows XP Media Center 2005

Podcasts and tv shows videos stop and start when playing. The Audio flows fine, but video freezes for a moment and continues. Do you know what I can do to fix?

When watching a podcast or tv program on itunes the video freezes and starts. The audio still flows just fine. Do you know what the solution might be?

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

Videos stopping and starting.

YYou tube and sky go stopped working properly from one day to the next. The videos stop and start every two minutes. There is a spinning icon next to the wifi icon when this happens. Why?

Well, ipad 1 has not got the best wifi. Your iPad may be lagging (because it's old) and can't cope with video playback. maybe it's time for a better ipad?

Buffered videos stop and start

I am trying to watch online video and tv. The video streaming stops and starts. It can be youtube, vimeo, or a television show online -- same poor result. I have a very slow connection. Knowing this, I always wait for the video to buffer -- there is always a greyed buffered bar well ahead of where I am watching. The video still stops and starts. Is this a connection issue or something else? Thanks.

T1 that is brutally slow, but I had hoped that despite how slow the connection is, the buffering would eventually get it downloaded. So even though its buffering, the slow T1 can still make the videos stop and start?

UM Service Does Not Initially Start

Hi, everyone!
Whenever our Exchange 2010 server is restarted, the UM service will not initially start. However, it will start when I then go to manually start it.
Based on the error logs, it seems like it may have something to do with DNS. The error mentions how 10.4.50.1 resolves to an invalid FQDN. 10.4.50.1 is the IP address to the PBX Gateway, which is the address entered into Exchange's UM Settings. No where
in the settings did I use the FQDN, which is why this error does not make sense to me.
I'm wondering if it's simply the service trying to start too soon prior to the network connection being fully established? We're running this on VMWare 5.5. Also, this PBX Gateway is across a VPN, but it's not an accessibility issue as all other traffic
to the Gateway is flowing properly.
I was hoping someone may have an idea on what to try.
It's not a huge deal because I wrote a PS Script that will check if the service is running and attempt to restart it, if it's not. This solves the issue, but it's more of a patch then a plug and I'd rather have things operating "normally."
Thanks in advance for any suggestions!
-Eric

Alright... well, we had to reboot the server and I checked when the server started back up to verify that the UM service started properly. It still did not, despite being set to Delayed Start now.
So I'm back to being unsure of what to try. I set my PS Script to run at startup and it checks every 15 minutes to ensure UM is running.
It's more of an annoyance that I'd like to not have, but again, not the end of the world.
If anyone else has any ideas, I'd be really grateful.
Thanks!

EA3500 youtube video does not start or very slow to start

my ea3500 has problems with youtube videos. When i click to start a video, sometimes it starts but after a very long buffering time (more than 8-10 seconds), sometimes it does-not at all some other time, the advertisement play but nothing happens after that (black screen). I have a fast internet access (30 MB up, 2 Mb down). I do not have this problem with the old router that the ea3500 is replacing ( a netgear wndr3700). On this old router al the videos are starting almost instantly.
I tried to lower the MTU of the 3500 from the default 1500 to 1400. No improvement.
I tried to disable the WMM feature in QOS and by doing so i create another problem : i cannot access the 5 Ghz band anymore. I can see the SSID but cannot connect to it.
Anybody having an idea on how to resolve this ?

Thanks for the reply
♦ a unique ssid : It is the case . I use Home as SSID for 2.4 Ghz and Home_5G for 5 Ghz
♦ wpa2 personal/ aes encryption : Never thought using less than that
♦ a 5Ghz compatible adapter on the PC : I use an Intel 5100 adapter on my laptop that do both 2.4 and 5 Ghz. I use the 5Ghz band on my laptop and the main family PC that is connected with a netgear WNDA4100 N900 adapter. All the other PCs(5 in all) use 2.4Ghz . After disabling Wmm in QOS, i was not able to connect the 2 PCs using the 5Ghz band . They could connect using the 2.4 Ghz SSID though. Re-enabling Wmm allowed me to use 5Ghz again.
I have the Youtube problem on both the 2.4 and 5 Ghz band. As i said when i reconnect my old netgear router, no problems at all.

Problem viewing videos on YouTube - starts, then restarts and then restarts, etc. Never can watch the video.

If someone sends me a link or i go to YouTube to watch a particular video it will start, run for a second then restart and continue to do this. I will not allow the video to start and continue to the end. Seems like it is one vicious circle with no end. I have then opened Internet Explorer and opened the same video and it works fine - except i prefer Firefox and don't desire to use IE. Any help is appreciated. I will put the last one I tried in the space below.

So in other words, the iPhone crashes in the middle of playing a YouTube video? If so call Apple to get a replacement immediately. This should be covered by your warranty.

Adobe premiere can not find any module capable of playing video. Update the video drivers and start again.

Adobe Premiere can not find any module capable of playing video. Update the video drivers and start again.
I've tried all the options suggested and the problem continues.
What else can I do?
Note: I had already worked before.
Windows 8.1
Notebook i7, 8M memory, video card Nvidia (updated).
Adobe Premiere Pro 2014
Please help me. Thank you.
mailto: [email protected]

Here is a link to an Adobe TechNote about the same issue with an earlier (much earlier!) version of Premiere Elements and Windows XP.
http://kb2.adobe.com/cps/324/324938.html
I'll leave it to Steve and Bill as to whether the fix offered in the link for Premiere Elements 2 would still be applicable to your version of Premiere Elements.
Hope this is of some assistance.

Video stopping and starting on macbook pro

All video stops and starts and takes forever to play. What can I do?

You posted in the iMac forum. Even though the issue could be the same on either Mac, you might try the MBP forum for better help.

Satellite P300 keeps restarting itself after initial start up screen.

My Satellite P300 keeps restarting itself after the initial start up screen.
The initial start up screen with the F2 & F12 options at the bottom appears, the screen then goes black, then a cursor appears in the top left hand corner and flashes a couple of times. Then the laptop shuts down and restarts itself and goes through the same process over and over.
This is all with the power adaptor plugged in. If unplugged, it will go through the above mentioned process and shut itself down with no restart.
Any help or advice would be much appreciated.
Message was edited by: aic-poppy

F8 is not listed in this meny, just F2 and F12 but F8 should help you to enter Advanced boot options .
Can you please give an answer to C3POs question?
Have you made some hardware upgrades in the past (RAM, HDD)?
Have you changed anything?

Video doesn't start from the beginning

Please tell me there is a setting on the iPod classic to always start a video from the beginning of the video??!?!?! I am using the iPod classic for video projection.
E.g.: I play video #1 until, say, 3:00. I select menu and go to another video or a song, a photo, whatever. I go back to video #1 and it starts at 3:00! WHY?
I want iPod Classic videos to ALWAYS start from the beginning.
Please tell me there is a setting for this.
thank you

I have good news for you, (compared to your other post!).
Select the video in iTunes and click on *File/Get Info* and look on the Options tab. Turn off the tick in *Remember playback position.* You can bulk select some or all your videos to do this.
Phil

HT5622 I need help trying to figure out why I'm not able to purchase anythi iTunes. I changed my password, that didn't help. I changed my payment type, that didn't help. It initially started when my password got disabled. Any advice?

I need help trying to figure out why I'm not able to purchase anything on iTunes. I changed my password, that didn't help. I changed my payment type, that didn't help. It initially started when my password got disabled. Any advice?

I need help trying to figure out why I'm not able to purchase anything on iTunes. I changed my password, that didn't help. I changed my payment type, that didn't help. It initially started when my password got disabled. Any advice?

No video on initial start up HP P7-1207c

Similar Messages

Maybe you are looking for