No video out through AJA to DVCpro

I am trying to preview video through an Aja deck, to a dvcpro deck and then finally to the monitor. My playback video option is set at
ProIO - NTSC US - Component YPbPr SMPTE n10 - 8 bit 422 (720 x 486)
I am getting audio on the meters in the dvcpro deck and audio to the speakers. But no video is getting to the dvcpro deck.
I have recorded a test tape and it played back nothing. Any Ideas.

AH....I have a Kona. Not familiar with the I/O. Hopefully someone here is. If not, try here:
http://forums.creativecow.net/viewforum/98
Shane

Similar Messages

Timed video out through firewire?

Hey everyone,
In Final Cut Pro 5, is there a way to set print to video on a timer? For example, print to video on Friday at 2PM.... Or simply, just play the entire video in the timeline at a specific time?
I'm assuming not, so does anyone know of any program out there that can play Quicktime videos out through Firewire on some kind of timer system?
I know this is an unusual request... and I can explain why exactly I want this if anybody wants me to, but it's kind of a long story =)
Any suggestions would be great!
Thanks,
Dean.

You can easily set up an Automator script to work with an iCal event...
use the script for PLAY MOVIE instead of record new video that I used here:
http://homepage.mac.com/captmench/QTAuto.swf
The video was done in haste... and there are a few errors in it... but you'll get an idea of what to do.
Good luck,
CaptM

Ios podcast utility that supports video out through composite cable.

Hi everyone,
I'm watching some video podcasts (you're right - MacBreak Weekly!) in my car while staying in traffic jams. And I use original Apple composite video cable to send video to the in-dash screen of my Nissan.
There have been some podcasts downloaders in App Store, like Instacast, Downcast, Podcaster. But none of them are able to send video out of iPhone.
If anybody seen one that is able to do that, I'd appreciate a link dropped over here.
Thanks a lot,
Egor.

try rebooting the iphone
my iphone4 works just fine with my composite and component cables I'm using latests ios version
but mind you it only works with tvout ables apps like youtube it don't support mirror

FCP video monitoring through AJA's T-Tap or UltraStudio Mini Monitor

Hello,
I'm working with dailies that are ProRes LT 2K resolution (2048 x 1152) for an offline cut. I'd like to use an HDTV 1080P for a video monitor (a regular HDTV, not a broadcast monitor). From what I understand, I can use either a T-Tap or an UltraStudio Mini Monitor converter to send video signals to the TV set from FCP.
Before I start buying this stuff, I just want to confirm with people on this forum who has experience with these set ups. My question has 2 parts:
1. Does this set up work or do I need to get other gears? (FCP out to converter through Thunderbolt and HDMI to HDTV)
2. I'm leaning toward the UltraStudio Mini Monitor mainly because of cost. I don't foresee getting a 2K monitor any time soon, so I wouldn't need the T-Tap for that purpose. However, since I'm working with 2K materials, and the HDTV is 1080P, can the Mini Studio convert (or down-res) it to 1080?
Thanks in advance.
Thien

I can only speak to the T-Tap...that's all I've tested. It works great with FCP...and AJA works with 2K footage, scaling it down to 1080. I'm not sure if the mini monitor does this, or if you need the Decklink 4K for that.
No other converters are needed. That's all you need....either one.
I will say that AJA has a better track record of compatibility...they seem to be the first ones there with drivers for the new software and updates, and the most stable with edit systems. And their tech support is top notch. That, to me, is worth the extra cost.
Contact Tech Support at AJA.com and ask them if it will work wiht 2K footage in FCP...they'll give you an answer.

Video Out with AJA Io

Anyone have any luck monitoring Shake 4.0 or 4.1 on an external monitor via the AJA Io? If so, what settings are you using? We can't seem to get it to work?
Dual G5 Mac OS X (10.4.7)

It will only work if you can make it one of your desktop monitors. You specify to Shake which of the desktops are broadcast out.
Patrick

785GM-E65 and video out

I am looking for an analog video out solution for this mobo. I bought a VGA to component video cable and that gets me an output with jiberish. I'm aiming for s-video or component. I read that some mobo's support s-video out through the VGA port. Does anyone know if MSI has included this feature on this mobo? I have not found any materials that indicate one way or the other.
Thanks for the help.

This board doesn't support that kind of video output. You could get a video card with super video out or get something like this converter.
http://www.newegg.com/Product/Product.aspx?Item=N82E16815158142&cm_re=vga_to_composite-_-15-158-142-_-Product
Good luck!

Video Out HD

Hi. I was wondering if I have a file that is High definition, can I output it to my HDTV keeping it's high definition quality. I know if I use the video out through S-video it wouldn't be HD. If I use a mini-DVI to VGA will that be in HD??? Thanks for the help in advance

yeah it'll work...but you'll need a VGA cable (which you can get cheap at any WalMart or somewhere). Here is my set up: I have my MacBook with a miniDVI to VGA adapter plugged into a VGA cable, which is then in turn plugged into the VGA input on my TV.
The bigger issue you'll have is audio, as your MacBook speakers won't exactly fill up a room and the VGA doesn't carry an audio signal. So you'll need a good set of powered speakers to plug into your MacBook.

How can I get my 2010 mac book pro to send signal out through the mini display port? end signal out through the end video signal out through the

How can I get my 2010 macbook pro to send signal out through the mini display port?

First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV. Is this a design flaw? Or is it me? My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV. Is this a design flaw? Or is it me? My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
http://support.apple.com/kb/HT1454

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Adobe premiere cs6 video out haisy through blackmajic decklink card

Adobe premiere cs 6 video out haisy through blackmajic decklink card in Mac OS X Lion (10.8)

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Also, there is a CS6 Bug using "spanned" AVCHD files, but so far I am only filming in short segments (under 4 Gig per file) so do not have the problem described in http://forums.adobe.com/thread/1004369?tstart=0
Finally, make sure you copy from camera to hard drive according to http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

Motion playback on production monitor through AJA Kona LH card looks nasty.

Okay, so here's the deal.
We have recently invested in some shiny new things to equip an edit suite - a Kona LH card and a Production Monitor. Along with a Sony HDV/DVCAM VTR. Specs of our set up are listed at the bottom.
Pretty much all of the work we have done in the past has been non-braodcast - we're looking to improve workflow and quality of final output. We work mainly with Final Cut Pro, but also with Motion.
We have connected everything and have marvelled at how much of a difference it makes having a proper video preview from Final Cut (v. 6) as opposed to what we had before - firewire to camera to TV... Of course we were expecting this marked improvement.
We were also expecting the key benefit of a video preview output from Motion.
Now. We do get a video output through to the production monitor from Motion. But this is where it gets weird.
When we do a preview of an animation, it looks really shoddy.
As a test case, let's take a basic text crawl in Motion 3.
Static graphics look great, but when you play motion graphics, the image quality is really jaggy and nasty. (even at full frame RAM preview, best render settings, full res - all of these options are apparently properly selected).
So we did some test exports. Usually we would export animations in the Animation Codec, with an alpha if intended for compositing on top of a video track in FCP... we tried a bunch of different formats - animation, photoJpeg, DVCPRO 50, Aja 2Vuy, Uncompressed 10bit...
All these play from Quicktime on the computer monitor just fine, but when playing from the AJA TV app to the production monitor, again the same problem. And then when you bring them into Final Cut, the same problem, even when you match the sequence settings and field order to the source video ...
In effect, it seems that anything generated in Motion just doesn't want to look nice on our Production Monitor - even when imported into FCP.
HOWEVER - if you drop the Motion PROJECT into an FCP timeline, all is fine!
We know the AJA card and the Monitor are working because of this fact, and because when you generate titles from within FCP itself - the same text scroll, for instance, it looks perfect!
I have also found when working with old composited animations originating from AE that you can get FCP to pump these through to the production monitor beautifully when working in an uncompressed sequence setting - or in an Animation sequence setting. (For an Animation sequence to go the the production monitor from FCP, the Video Playback option in A/V Settings needs to be set to "AJA Kona 625i25 RGBA" instead of "AJA Kona 625i25 8 bit" or 10 bit).
The above point could be of relevance...? The only Video Output options from Motion or AE that apply to our setup and monitor are "625i25 RGBA" and "625i25 DV-RGBA" ... are we supposed to have more options?
In short, we could work around these issues - it just doesn't seem right however that we can't get a decent external preview from Motion. A big reason for upgrading our setup was faithful video previews of animations from these programs...
We also can't understand why exports from these animation programs can look so poor. I can export a video with a text crawl generated from a DV PAL Final Cut Project with DV Pal compression settings and it looks massively better playing through AJA TV than our test Motion exports.
It just isn't right.
Please help. Pretty please.
For reference, here are the specs of our set up:
Apple Dual 2.5 GHz PowerPC G5
4.5 GB DDR SDRAM
Graphics Card: ATI Radeon 9800 XT
Equipped with Kona LH Card
JVC TM-H1750CG Production Monitor fed via SDI (have also tried component, to no avail)
It just isn't right.
Please help. Pretty please. Many thanks in advance.
For reference, here are the specs of our set up:
Apple Dual 2.5 GHz PowerPC G5
4.5 GB DDR SDRAM
Graphics Card: ATI Radeon 9800 XT
Equipped with Kona LH Card (version 5)
2 x 23" Apple Cinema Displays
JVC TM-H1750CG Production Monitor fed via SDI (have also tried component, to no avail)

Sounds like you are seeing interlace artifacts - in Motion's project properties, have you tried setting the field dominance to None?

Tecra M4: TV s-video out does not work with Vista

I have windows vista ultimate on Tecra m4.
I tried to get tv out through s-video but nothing happened.
I tried fn+f5 but it shows only Lcd choice with no other choices.
While it works good with windows xp tablet edition I installed the newest driver offered by toshiba but nothing happened.
The same problem is still here; no tv out.
Can any one help me

Hi
As far as I know the Vista drivers are not available for the Tecra M4 at this time.
I have checked the Vista driver download site and the M4 is not listed.
I think you have to wait for compatible drivers
If you install the graphic driver, you should check the Nvidia display settings. There you could choose between the TV, analogue display and digital flat display.
There choose TV and configure it via device settings

Macbook Pro DVI and Video Out woes..

Hey, this seems to be a known issue although specifics are difficult to nail down. I've had my macbook pro since shortly after they were launched and been using the DVI - S-video adapter since day one, and it's been outputting to all TVs with no problem.
I recently got a nice overtime payment from work and decided to treat myself to an external 24" display, was very pleased with it when it arrived. Plugged it in downstairs, and ran it for a few hours, putting it through its paces - worked great.
Decided to move the whole arrangement upstairs and 'no input signal' said the monitor, the MBP just didn't detect anything in the displays. The built-in display did it's blue screen when the cable was plugged in, so it's definitely detecting something.. The monitor is connected via a DVI-D single-link cable. I've confirmed that both cable and monitor work using a different computer.
So after this happened, I decided to try plugging it into a TV again to see if the S-video out worked and although Displays picks up the TV and everything is as usual, nothing is shown on the screen.
Any suggestions would be very welcome before I get my hammer and remodel my computer!
Anyone else suffering from something similar to this?
The monitor is a 24" Yuraku YV24WBH1.
Cheers.
PS I've tried booting from the install CD, two versions of XP bootcamp (one with standard drivers, one with Catalyst, and the computer's old HD with 10.4 installed on it - no joy with any)

Another update, I did some research and it seems that ATI are cagily admitting to the fact that there might be a problem with the X-series;
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=26586
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=21266
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=25682
You'll notice that ATI tell you to contact the manufacturer of your computer if the graphics are integrated into the motherboard. Like with Apple. Much joy to be had there.
I phoned their technical support and got talking with a specialist who was mystified and suggested 'turning off the airport'.
Also, it seems that Apple rather significantly "underclocked" the GPUs in their macbook pros;
http://www.reghardware.co.uk/2006/04/19/applemacbook_pro_gpuspeed/
http://www.maconintel.com/news.php?article=178
http://forums.macrumors.com/showthread.php?t=306024
http://forums.macrumors.com/showthread.php?t=194647
Could be running the GPUs are running on a lower voltage and maybe they're not working right, or the signal isn't stable enough to pick up an EDID? It seems to be quite a mystery. Perhaps the osx86 community will have some tricks up their sleaves for twisting the x1600's arm. Still doesn't explain why the monitor worked that one time.
This probably isn't an issue for anyone who doesn't want to plug their laptop into an external display, but I suspect it's a widespread problem just waiting to rear its ugly head, especially as HDTVs become more ubiquitous.
Anyone else struggling with external display devices, or with solutions, I'd appreciate your input.

MacBook Video Out problems.

Hey all.
Bit of an issue regarding my Macbook. It's a 2ghz Duo With ram upgraded to 4gb by myself. For some reason the video out on my Macbook has decided to stop working. Is it possible that it's hardware related? I have tried the following.
1: Bypassing my Onkyo TSR 609 amp straight to TV
2: Lowering resolutions (although 1080i and p was fine)
3: Bootcamping into windows to see if its an OSX issue. (my friends Samsung laptop works just fine through all the various combinations)
4: Punching it.
Im at a loss now, was working fine, got my new amp and was working fine through that for a week (havent changed any settings on it, and as I said same issues straight to TV which is a 42" Sharp XD1E) and the picture just comes out as multicoloured digital noise but you can just about make out whats on screen.Its a fairly weak connection on the MiniDVI port on laptop itself, It's connected via MiniDVI to DVI/HDMI dongle. I have also swapped out cables. It's not the amp as my PS3 blasts out 1080p with NO issues, please help!

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

No video out through AJA to DVCpro

Similar Messages

Maybe you are looking for