No video output via hdmi
I have a brand new Apple Mac Mini that was just delivered via Fed Ex a couple of hours ago.
I CANNOT get video to display over HDMI on my 50" plasma. When I comnect it and boot all I see is "no video input."
I have a newer, smaller Sharp plasma that will show the Apple start-up/splash screen for 15-20 seconds then the screen goes black.
I think the resolution in the settings is too high for my mini but how do I change if I cant see the **** screen?
I believe both of these TV's max out at 720p.
PS. AppleCare Support wants to send me another computer but I can guarantee it isnt a hardware failure.
Any thoughts?
Well, BSteely, where to begin? After my extensive discussions with more than one support engineer at Apple in Toronto as well as in Austin an interesting picture is emerging. Seems that I'd omitted a few things: First, I was not trying to display HD content but rather standard definition content. Second, I made the mistake hoping for an elegant and easy solution in hookup via HDMI (new flatscreens don't even have a DVI port anymore) - bad mistake! As one of the technicians put it, HDMI is an "unsettled" platform when it comes to HDCP, currently in version 1.4 , meaning, I should have tried VGA instead, a "settled" platform after all. Now, whether this will work remains to be seen because I don't have a micro DVI to VGA adapter yet but suffice to say that in essence I've been getting the message from Apple that, yes, the MacBook Air will - in the near future - support HDCP, but for now it does not contain the necessary software simply because HDMI is in its forth incarnation; plus, as they put it, Apple can't be responsible for testing compatibility with every single HD television set on the market - while it is true that there are thousands in existence, at the same time there are only four versions of HDMI with different HDCP specs! So, while I may be partially answering my own query here, it seems that Apple at this point is not particularly eager to make this software available because they rather would like to sell their new displays with the micro DVI ports instead of us endusers being able to hook the computer video signal up to just ANY monitor or TV. In the end, it is my hope that they will reconsider and not forget who their customers are, maybe after the Christmas season....
Similar Messages
-
I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
ThanxI can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx -
Help with sound output via HDMI
My sound output via HDMI suddenly stopped worked to my TV set. I've reset the PRAM and the SMC. When I go to sound control panel for sound output, the setting is on Headphones. When I try to change it to SV420XVT1A (the tv) it immediately jumps back to headphone. I also tried a different HDMI cable to a different HDMI port on the tv. This just started after the Mac Mini had been turned off for a week. I'm using Lion and it's an 8GB Intel Core 2 Duo. Any suggestions?
I actually discovered this answer about 5 minutes after I posted the question. Thanks a lot for your help!! Funny thing is that it had worked all along with something plugged in the headphone jack but suddenly stopped working. Again, thanks!
-
Video output via cable - incompatible with video p...
I find that although video output via cable from the Nokia 6220 classic (and I presume other Nokia phones) works fine with TV sets, I haven't found a single video projector that accepts the output and is able to project it. The projectors typically search their video inputs and should recognise the composite video input, but instead they just keep searching and are never able to recognise or project the video.
Is there something unusual about the video signal output from it so as not to be accepted as composite video by video projectors?iphone4 and composite and component cable don't support mirror so they
only display images when an supported app is being used like youtube or the video app and the likes
use both the composite and the component cable with my iphone4 on 5.1 and both works fine
so do my ipod touch with 5.1 and ipad2 with 5.1 -
How can I get an AIR application to a video output via DeckLink card with alpha channel?
Hi there!
Anybody knows how to get an AIR application to a video output via DeckLink card with alpha channel?
The reason is because we want to develope tv show games with air.
Thanks.See if these have iMac Nvidia drivers:
http://www.laptopvideo2go.com/drivers/ -
Is audio output via HDMI and componet cables possible?
When I watch movie I want audio through my TV speakers (via HDMI). That way I can control the volume through my TV remote.
When the TV is off and when I want to listen to music, i want audio to go to my Creative Labs "stereo" via audio component cables.
Is it possible to have both HDMI and audio component cables plugged in at the same time? to different sources and both outputting audio (not at the same time)?
thanksYes, audio will do this video won't.
-
Nano video output via headphone socket?
Can the new Nano video output to the TV via the headphone socket, like my iPod Video 80g?
Thanks.Trip to Apple store and Genius Bar (Genius my a**e!), where I had a 2 hour wait, 20 minutes with the Genius (I use the term lightly) to be told what I already knew, plus he thinks the headphone output is connec ted to main logic board and that will cost almost £300 for parts. Dream-on!
On the way home I purchased a £8 Toslink cable (£32 in Apple store) plugged it in and hey presto - perfect sound.
So it looks like the headphone socket is stuck in digital mode.
Well at least it's getting better. Now off to research & establish how many other folks report same issue. -
Running on MBP in the field, can I monitor Color video out via FW connected to DVCPro deck then out to NTSC monitor? FCP outputs fine. In Color the video output selection is greyed out... jPo? Shane?
ThanksThanks.
That's too bad, it'd be nice to show some options on set with a basic FW interface... wouldn't wanna schlep all that gear around... -
Hi. I can only stream picture and PCM out of my Mac BookPro. What settings need to be adjusted to output Dolby Digital or DTS to an HDMI adaptor had thence onto my AV Processor?
The Audio Midi Setup utility may need to have its settings updated.
That's if you have the right adapter:
https://discussions.apple.com/docs/DOC-2821 -
Satellite R830 and video output through HDMI
Just wondered if it's normal for my laptop to output a max of 1280x768 through HDMI to my 26" LCD TV?
Its a Satellite R830 i3 with hd3000 graphics. I have 8GB RAM. Tried under Windows 7 and 8 but the same.
Also tried custom resolution but it just says on the TV out of range.
Mt graphics driver is up to date and I had full hd working on this TV via another older laptop.
Any suggestions please?I dont know your LCD TV specifications but fact is that external resolution depends on three options:
graphic card driver, graphic card and the external device connected to notebook/computer.
So if your TV does not support an higher resolution, you will not be able to choose another resolution.
If your TV supports higher resolution but the graphic card driver and graphic chip would not support higher resolution, you will also not be able to use it. -
Video Output via VGA "not authorized"
I have the VGA output cable for my iPad, but on my newer videos, it gives me an error message that the display is not authorized to view the content. Do you perhaps know how to authorize a display?
Rental movies and maybe some other purchased videos will not display on video out because of licensing reasons. There is really nothing you can do.
-
Video output via composite cable & video output on iPad screen
Is it possible to have the video play on the iPad simultaneously as it outputs to composite cable? Whenever I play a video with the composite cable plugged in, the iPad displays a screen shot of a random video (same screen shot every single time). It's a complete mystery to me. Any ideas?
It sounds normal to me. The composite and AVGA out on the iPad do not mirror the the iPad's display as you found out. However, there may be some apps that will show video on both screens.
-
Iphone4 video output via composite av cable
Hi, this questions probably been asked loads of times but I haven't found an answer , hence , can someone please tell me how to switch on video out on iPhone 4 on 5.1 , I bought composite cable but no video just audio . Can any1 out there help. Thank you
iphone4 and composite and component cable don't support mirror so they
only display images when an supported app is being used like youtube or the video app and the likes
use both the composite and the component cable with my iphone4 on 5.1 and both works fine
so do my ipod touch with 5.1 and ipad2 with 5.1 -
Can I get HD Quicktime video output via Windows 7
How can I put this. I have a fellow employee to states that it is impossible to produce HD quality QuickTime via via Windows 7. Is this an accurate statement?
Not true.
If your source files are in high definition format you can edit and export via QuickTime Player Pro. -
Mac Mini with no monitor controlled via VNC - video output corrupt
Hi,
I have a Mini running with no monitor, mouse or keyboard connected (it's used as a Server for my music library) that I control via VNC on my Mac Book.
Everything works fine until I ever have to reboot the Mini. After the reboot, logging into the machine via VNC shows all the video corrupt (jagged horizontal lines through the whole display making it totally undreadable).
This happens both with ARD and Chicken of the VNC (tried both in case it was an issue with the VNC software).
To fix it I have to connect a monitor to the Mini. Then I can just unplug the monitor again and the video output via VNC is fixed.
Anyone have any ideas? It's driving me nuts
Thanks,
NeilAfter some more searching I stumbled across this thread on another forum;
http://www.macusenet.com/archive/index-t-75211.html
It seems that the problem can be avoided by connecting the DVI-S-Video adapter that ships with the Mini.
Maybe you are looking for
-
How do I get rid of my old charter email address on the game center app and icloud. It is messing things up when I go to sign in with my new Apple ID using Att? I am continually asked to update my password!!
-
HP compaq Presario C700 LAPTOP NO Power
Hi I have a compaq presario c717nr that works with a charged battery, my ac adapter works as I have an hp pavillion d6000 and it works, also tested the ac adapter from my pavillion on the presario and it does not power up with out the battery, when p
-
CALL FUNCTION 'PRICING' ,Not Feteching the PBOO and PBXX condititon record
hi all, We are maintaintg the RFQ net price using the FM's MEX_SCHEMA_SUCHEN, ME_FILL_KOMK_PO,ME_FILL_KOMP_PO and PRICING in PRICING FM it is not reteriving the default Condition records(PB00,PBXX), am not able to see net price in ME48. Is there any
-
OnMouseClicked Event Is Failing To Fire
After clicking on the blue rectangle while the program is running the onMouseClicked Event fails to fire. I am expecting a message to appear in NB's Output window. Below is the relevant source code in relation to handling the onMouseClicked event: pa
-
1 computer and 2 users!! HELP!
Here is the deal. My parents got my an iPhone 3gs for xmas last year. I gave my old iPhone 3g to my dad.. butttt instead of restoring it to the factory settings like i should have i just deleted all of my info from just the phone.. my problem is that