No video playback after 20 minutes of editing with

Hello,
I have problem with Premiere CS6, which is driving me insane. After around 20 minutes of editing, Premiere stops showing me any video content. I can still interact with the program, the only thing that doesn't work is viewing clips and interacting with them in the timeline. The only things I see are grey boxes.
After quitting Premiere I cannot immediatly restart it, because it stays forever at "Loading ExporterQuickTimeHost.prm". It is also notable that after quitting Premiere CS6 the application stays in the task manager und is not killable. I read that "Adobe QT32 Server.exe" (which is also still running and is not killable after quitting Premiere) might be the issue but I didn't find a way to fix the problem.
I am working on Windows 7 64-bit machine with DNxHD enocoded files in a mov-wrapper. I reinstalled Quicktime (newest version) but the problem remains.
Any suggestions?

Unfortunatly it didn't help. Playback froze up on me again a minute ago. The DNxHD files I am using contain 6 audio tracks, which Premiere doesn't recognize (it only displays one track) and it also freezes up, when it's automatically creating peak files. Maybe the problem has something to do with that?

Similar Messages

  • Slow video playback after reinstalling Geforce2 MX  card

    Ok, reinstalled (took out the 9200 card) my Geforce2Mx card and now everything is in super slow motion - video, scrolling, typing, opening and closing of apps, pull down menus, loading of web pages - everything. It's like being back on an old SE30 and now even that seems fast to what is happening now. What did I do wrong? Tried rebooting a few times and resetting pram with no better results.
    G4 Mac OS X (10.3.9)
    Posts: 536
    From: Vancouver, Canada
    Registered: Dec 30, 2005
    Re: Slow video playback after upgrading to ati 9200 card
    Posted: Apr 10, 2006 11:56 PM
    in response to: G J
    Press the button near the battery on your logic board, it will reset the PMU, which might help.
    Gigabit Ethernet G4 upgraded 1.2Ghz, 120GB HD, 10GB HD, 1GB RAM Mac OS X (10.4.6) ibook G4 1.42Ghz, 80GB HD, 786 MB RAM, 1GB iPod Shuffle
    Tried that also with no results. Also repaired permissions. What could have happened to the machine to do that?
    G4 Mac OS X (10.3.9)

    Installed the modified Radeon ATI 9600 Pro for G5 Edition card and I still have the same slow video playback results. However when I boot up from another internal hard drive I do not have the video problems. Everything works just fine. Both of my hard drives had no video problems before screwing around with the ATI cards and now the one still has the problems with the video playback. This one also has Classic on it and Classic also runs slow. BTW I don't know if this has anything to do with it but when I ran a search result for "ATI" no files are installed on that 2nd hard drive which is playing video and loading pages with no problems. Would trashing all those ATI files on the slow drive do anything to help? Or is this just a coincidence?

  • IMovie 10.0.5 crashes on my iMac (2007, OS X 10.9.5) after 10 minutes of editing.

    My iMac Mid-2007 (with 2GHz Intel Core 2 Duo Processor, 4GB 667 MHz DDR2 SDRAM, with 130 GB of 250 GB storage available) using OS X 10.9.5 crashes after 10 minutes of editing on iMovie 10.0.5.  The window and the wallpaper both start breaking up, everything freezes including Force Quit, so the only thing I can do is shut down manually.  After a few minutes, when I restart all is good...for 10 minutes, and it all happens again. I have also had trouble with setting the speed for all stills and with the indicator that shows a still has been used in the project. This is the first project I have attempted since updating both my operating system and iMovie. I am tempted to trash my current iMovie and install iMovie 10.0.6, but somehow I still have iDVD and don't want to lose it.

    Thank you for your questions/advice. The answer for your 1st question is yes, and "may be" to your 2nd question.  Fortunately, I had exported the recently developed photos into my external head drive. After reverting back to the original catalog, I have re-imported those developed photos. Now everything is restored. I need to learn more about the subtleties in using the Lightroom.
    Thanks again,
    GY

  • My iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

    my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Problem when exporting movie, video stops after 2 minutes

    I set up a Project containing both images and videos. They were all shot using a digital camera (Canon SD400).
    When I export the 5 minute movie, around 2 minutes the video freezes, but the music (from an mp3 file) keeps playing. At 2 minutes one of the videos start to play and the video has a little yellow button showing on it in the timeline. None of the other videos have this little yellow button, although I am not convinced that this is the one causing the problem. Here is an image of it:
    http://dombovari.com/stuff/imovie.png
    Any ideas why the video playback would stop when I export it? It plays fine in iMovie when I preview the project, but when exporting, the video playback stops.
    Thanks!

    I have this very same problem. All 640x480 clips shot with a Canon SD550. iMovie 5 will play back everything fine in iMovie, but once I export the file using H.264 or MPEG-4, the video stops after about 30 seconds (of the 3 and half minutes of the video). The music still plays, but the video has not exported properly (and it shows in the file size).
    What WILL work is if you export it to web, but I can't use that. I need it exported at its full quality. (Also will not work, by the way.) But, again, it plays in iMovie just fine. I even tried exporting from the timeline file (with the reference media files) in the iMovie file package—but I get the exact same results.
    Quite frustrating considering it works in iMovie just fine. Any other ideas, folks?
    System/Software: MacBook Pro 2.0GHz, 1 GB, 256 X1600. Latest Tiger, latest QuickTime, latest iMovie HD.

  • Program Monitor is Black, no video playback after installing new graphics card

    I bought a PNY Nvidia Quadro 2000 graphics card a few days ago, and since it's been installed, I've been unable to watch video playback in my program, source or even reference monitor.
    Similarly, If I designate one of my monitors soley for video playback, the screen is just black, and as the timecode advances on my timeline I only hear sound.
    My project is using "Mercury Playback Engine GPU Acceleration" for Premiere Pro CS6.0.1
    I went from using one graphics card to using two graphics cards, and installed a third monitor. I've spent the last few days trying everything I could think of, I even uninstalled and re-installed premiere.
    Hardware Specs:
    Windows 7 Ultimate (64-bit)
    HP Pavilion h8-1230z
    AMD-FX8150 3.59Ghz 8 core processesor
    16GB RAM
    600W PS
    EVGA Nvidia GeForce GTX 550Ti
    PNY Nvidia Quadro 2000
    I am using a PCI x16 for the Quadro 2000
    I am using a PCI x1 slot w/x1-x16 adapter for the 550Ti
    Could this be the problem?
    Additional Information
    Vectorscope, All scopes, YC Waveform - Display modes all work.
    I downloaded the most recent Nvidia drivers for both of my cards.
    I haven't received any error messages or had any problems in After Effects CS6, as video playback is working properly in my other adobe applications.

    I am still building a new system, so currently I'm still using a 480. You can read all about my choices and progress here: Adobe Forums: Planning / building a new system. Part 1
    There are 11 entries in the Benchmark Results that succesfully use the GTX 680, even though it is not 'supported'. They all use the 'hack'. However, the 680 has been added to the list of supported cards for AE, so it is only a matter of time before the 680 will be added to the list of supported cards for PR. Todd had made that clear. Now, when the 680 is added, it makes sense that the 670 will also be added. My guess is that both will be added in a short while.

  • No sound on any video playback after 5-10 seconds

    The sound on my second generation ipad seems to disappear after 5-10 seconds of watching any video playback, although sound works when i stream to my apple TV so I'm assuming its the device that's problematic. Any suggestions on how to resolve this issue and get sound from the ipad would be greatly appreciated.

    Perform a "reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
    Then test to see if it solved the problem.

  • Video Playback After 3.1.2 Update

    I have recently updated to 3.1.2 and now find that some videos, that played perfectly well before the update, are now pixelated and of a considerably lesser standard.
    Is anyone else aware of this issue and is there any way around it?
    Thanks in advance.

    Your suggestion to reset and restore is much appreciated.
    However, I wouldn't have labelled the video playback issue a bug before trying something so basic.
    To review, just like to person who began this thread, when playing back videos on my 2G iPod touch using OS 3.1.2, any attempt to summon the video controls, after about the first 10 seconds of playback, does not work. The iPod offers no response to any gestures on the screen.
    That the iPod's behavior (a) was not observed before the current OS, (b) has been experienced by other users with the same hardware and firmware combination, and (c) continues no matter how many times I reset and restore the device, sounds very much like a bug to me.
    My apologies if I offended anyone with the question I posed at the end of my previous post, but it does seem that, in their rush to get stuff out to us, high-visibility glitches like this are becoming more frequent. Perhaps, with our ridiculously high expectations of Apple, we are in part to blame.

  • Slow video playback after upgrading to ati 9200 card

    Just upgraded my graphics card to the PCI ATI 9200 but now I have slower video playback than I had with the OEM Geforce AGP card. Does anyone know why this has happened? I thought I was gonna get better playback by upgrading
    G4 Quicksilver 733 896mb ram   Mac OS X (10.3.9)  

    Hi,
    Well, you have me scratching my head, that's a real puzzle.
    Try an Open Firmware re-set, do the 're-set all' procedure:
    http://docs.info.apple.com/article.html?artnum=42642
    BTW, ATI (and OWC) has just released this info on their 9600 video card, meaning it's not so good for G4's:
    Knowledge Base
    ATI Customer Care > Product Information > Specifications, Features, Comparisons >
    737-21888: Radeon 9600 PRO PC & MAC Edition list of supported system configurations
    The information in this article applies to the following configurations:
    Radeon® 9600 PRO PC & MAC Edition
    "Quicksilver" Power Mac G4 model
    "Quicksilver 2002" Power Mac G4 model
    "Digital Audio" Power Mac G4 model
    The Radeon 9600 Mac & PC Edition is not compatible with the "Quicksilver", "Quicksilver 2002" or the "Digital Audio" PowerMac G4. If a Radeon 9600 Mac & PC Edition board is installed in one of these systems the result is a blank display.
    For assistance in differentiating Power Mac G4 models, please refer to Apple Article 58418.
    Regards,
    Dave

  • G5 crashes during iTunes video playback after Leopard install

    I have a G5 1.6 single-processor running 10.5.1. Since I installed Leopard, I have been experiences frequent crashes during iTunes video playback (TV shows bought in the iTunes store). The crashes hang my whole system and require a restart by holding down the power button. The video itself sort of "blip-blip-blips" during the crash, but the mouse and keyboard are unresponsive, windows don't do anything, etc.
    Any thoughts? Anyone else with this problem? Thanks!

    Ever since I installed Leopard on my dual 2ghz G5, neither itunes nor quicktime player works. They both crash on launch. Maybe not the same issue, but I'm regretting the upgrade.

  • Ichat slowly crashes after two minutes or so with one user only

    I've been using ichat for years with my parents and brother, My brother has an older imac and we can chat just fine. Recently ichat has not been working with my parents mini mac, although it used to quite well. Chat starts off fine and slowly deteriorates, after two minutes or so the video and audio become so bad it's not worth continuing. We both have the same versions of OS 10 and ichat and I am at a loss to explain the trouble. If we watch the connection doctor as we chat, my signal slowly drops till it can't carry the load. When I call my brother, no loss of signal. I am using airport but when I connect the cable directly there is no change, signal strength still falls off. As far as we know, no hardware or software changes have been made to either system. I recently upgraded my internet connection speed to try and beat the problem but it didn't resolve the issue. We did learn that if we both make our video windows as small as possible, we can talk on the deteriorated signal. Any ideas?

    Hi
    First have you and your parents set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps
    In ichats prefs click on video and change bandwidth limit to 500
    Restart iChat.
    Tony

  • Premiere Pro CS5 not responding after 55 minutes of capture with intensity shuttle

    Hi and thank you for the valuable resources on this forum.
    I am capturing analogue video into Premiere Pro CS5 using he Blackmagic Intensity Shuttle (with Time Base Corrector in the video path).  My captures are stopping at 54 or 55 minutes when the computer becomes non responsive.  This has happened with the Blackmagic motion jpeg codec as well as the 10 bit YUV capture. Same thing happens if I capture with media express (the blackmagic capture software)
    I have tweaked my system as per many of the recommendations in the forum.
    Running CS5 5.03, autosave set to 10 minutes (same problem with no autosave or autosave at 20 minutes)
    Windows 7 64 bit fully updated
    i7 - 930 cpu
    Gigabyte x58A - UDP5 (Revision 1)
    24 Gb Ram
    Nvidia 470 - MSI with the twin Frozr cooling solution.
    Restore off, indexing off, windows search off,
    Followed tips from forum and Viper regarding optimizing system
    3 Hard drives
    System on standard Sata 2 drive
    Project capture to OCZ Vertex 3 120 g SSD drive (nice bit of gear) running on Sata 3 controller
    Page file on another hard drive
    Norton 360 unistalled
    Anything else I could find unistalled or turned off.
    Firmware and drivers for on board USB latest from Driver Station as per Blackmagic Recommendations.
    Very succesful capture of things shorter than 55 minutes but I have some longer things I would like to capture in one go.
    I have used process explorer to watch what happens.  Nothing special that I can identify in terms of processes but cpu seems to be going to 100%.
    With progessive tweaks the problems remains the same.
    I am not aware of any file size limits with Premire Pro or Blackmagic - are there some?
    Considering reinstall but would greatly appreciate any insights.  My first post so I hope I have provided the right info to help you help me.
    Thank you
    Andrew

    Good that you got it fixed... bridging device drivers have cause problems clear back to the computer version of the stone ages
    I still have a Pinnacle Dv500 card (used via dual-boot with WinXP and Premiere 6x) that went through several device driver versions to get everything working right
    While everything is working right... make a full "picture" of your hard drive to external USB drive to make recovering easy in case something goes wrong
    Hardware crashes or virus infections happen, so you should buy software to make a full
    backup of your hard drive to an external USB hard drive... plus, making step-by-step
    backups during a new install or major program addition makes it easy to go back a step
    if something doesn't work
    This backup and then restore is, of course, only to the same computer with a new drive
    (or the same drive as long as you don't mind writing over everything) since doing a
    restore to a new computer won't work due to Windows and many programs having activation
    information that is keyed to your hardware (which is why Windows will force you to RE-
    Activate if you change very much hardware)
    The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
    Image runs off of a bootable CD via Linux (the Zip you download includes a program to
    make the bootable CD) and it reads EVERYTHING on the drive, even the hidden
    registration information, so everything is restored when needed... and you may restore
    the image to a brand new drive in case of a crash, and not have to re-install anything
    Please note that I own no part of Image, and I don't get a referral fee (that is just a
    plain web link) but I use the program and it has saved me a LOT of trouble when I had a
    hard drive die... and I was able to restore everything and not have to re-install or
    re-activate a single program, from Windows on up

  • Video playback on pc out of sync with audio

    hello, play back on iPhone all ok but when I play it on my pc the video lags and the audio is out of sync.
    heres the strange part. If i create a project with the video using iMovie and do not edit it at all and save it as 1080hd, that video plays on pc all ok

    Q? Are you using Quicktime to play the video on your PC or other video player like Real Player?
    As some 3rd party players may not sinc right or you may have to download a newer codec.
    I use GOM player and it works well on my PC for video from iPhone 4S.
    Hope this helps.
    Greg

  • Choppy iPhone video playback after upgrading to 10.5 + QuickTime 7.6.9

    Hi,
    I recently upgraded from 10.4 to 10.5 on my Powerbook G4. I used the "Archive and Install" option. After updating all software to the latest (10.5.8 OSX + 7.6.9 QuickTime), I noticed that the playback of the videos shot with my iPhone 3GS becomes extremely choppy (jumps combined with slow-mo). Based on the what's in "Previous System", I was using QT 7.6.4 with OS 10.4, which didn't have this playback issue.
    I found several posts related to similar issues in the forum, and tried the following suggestions without success:
    (1) removing all third party plug-ins from /Library/QuickTime;
    (2) repair permissions with Disk Utility;
    (3) installing Perian;
    None of the above made a difference. Just for the heck of it, I tried "su" in Terminal and moved "QuickTimeH264.component" to "QuickTimeH264.component.bkp". Surprisingly this made the playback a lot better (all the iPhone clips are H264+ACC). So I'm guessing somehow the QT H264 component is not working properly for me, but what is QT using instead to play those videos after I renamed the component? It shouldn't be any of the third-party plug-ins since I tried removing all the third-party stuff at the same time, and the videos still played fine. I'd like to get to the bottom of this as I'm a little uneasy about re-naming the H264 component.
    I hope someone more QT savvy can diagnose the problem based on what I've tried and make new suggestions. Granted my machine is a bit long in the tooth but it's still decently powered (1.67 GHz, 1.5 GB RAM, 320GB HDD) and the videos played fine before the "upgrade".
    Is it worth doing a clean re-install of 10.5 as opposed to the "archive and install"? It's a pain obviously to have to re-install all the apps but I'm willing to try it if it could reasonably make a difference.
    Thanks in advance!

    The problem is that you moved your Mail application to a sub-folder in your Applications folder, and you are running an older copy of Mail.
    From your crash report it shows your path is to a different folder then the default folder:
    Path: /Applications/Mail Apps/Mail.app/Contents/MacOS/Mail
    It also shows that you are not running the correct version of Mail (should be version 3.5 (930.3):
    Version: 3.5 (929.4)
    Check out this article:
    http://support.apple.com/kb/TS2486
    The short of it is that you may have two copies of Mail on your system. When 10.5.6 installed, it may not have updated Mail correctly. Look to see if you have another copy of Mail in your Applications folder, and if so run it and check it's version from the 'About Mail' menu option, it should be 3.5 (930.0). My recommendation is to remove any copy of mail that is not in /Applications (if there is no version of Mail in Applications, move the one you have in Mail Apps back) and run the Mail Update referenced in the article above.

  • Help with video playback after updating to 3.1

    Hi there, after updating to 3.1 on my 2nd gen iPod Touch, I restored it and loaded some videos I converted. On playing those files, the video would play normally until at a random point the video frame would freeze, while the audio continues to play. If I quit the video app and go back to the video, it would play again normally for maybe 1 minute and then the video frame would freeze again, while audio still continues.
    These video files were working perfectly before I updated to 3.0, so I doubt that there is a problem with the files. Could someone suggest what I should do in this situation? Should I revert the firmware back to what it was before updating to 3.0?
    Thanks in advance for your help!

    I have the same issue, except that if I let it go on for a few secomds the video eventually catches up. I am also watching converted videos, and mine are in mp4 format. I haven't tried m4v yet but this is still a bug that Apple should fix.

Maybe you are looking for