No video playback in Premiere Pro CS5.5

Video playback is completely unresponsive. the program monitor's show through to whatever is behind the program (for instance - the desktop or whatever else is open). I have a GTX560 Ti graphics card and i've already enabled it as a supported CUDA for the 'Mercury Playback Engine GPU Acceleration'. I'm new to using forums for help with these matters. please help.

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0

Similar Messages

  • Specific Video Footage in Premiere Pro CS5 completely black.

    I've been working on a music video project in Premiere Pro CS5 for the past few months and everything has worked really well until just a few days ago, when a certain chunk of my high speed footage randomly turned black. I have it in its own bin so it's separated from my other video source files. If I try to preview these videos, all it shows is black footage (though the timelengths for each one are still correct). I checked and made sure the actual .avi files on my hard drive still worked, and they played through perfectly. I tried re-importing these videos into my project file and that didn't do anything. I made sure they were connected to the right files in the right folder on my computer, and they were. The rest of my video footage works just fine, so I'm confused why this certain bunch randomly turned completely black.
    I backed up the entire project to an external hard drive and loaded it on a different computer with Premiere Pro CS6 on it, and everything works perfectly again. Does anybody have any idea how I can get my footage to return from the black abyss it's fallen into on my personal computer running CS5?

    AVI is a wrapper... what is inside your wrapper?
    Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    For PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Why Do I Have Choppy Video Preview with Premiere Pro CS5.5

    Current Build:
    Choppy Playback Adobe Premiere Pro
    Adobe Premiere Pro CS5.5 V5.5.2
    Computer Build
    Intel i7-2600K CPU @ 3.4 GHz/8M
    ASUS Sabertooth P67
    Windows 7 Pro
    1000WATT Power Supply
    (4) 4GB DDR3--1333 (16 GB RAM Total)
    64 Bit Operating System
    120GB Intel  510 SATA III Hardrive
    WD 1TB SATA-3 64MB Hard Drive
    (2) Fantom 2TB (USB) External Hard Drives (Where Video is stored)
    (2) XFX HD6850 1 GB Video Cards run in Crossfire
    (1) Scratch Disk 869.1 GB
    Pulling HD Video from a Sony Handy Cam 1080 etc.
    Guessing its going to be hardware related and I would like to know how to get this thing running seamless. 

    PPro before the cloud does not support crossfire... and that may cause problems
    Dual Card SLI http://forums.adobe.com/thread/872941
    -problem http://forums.adobe.com/thread/872103
    USB2 hard drive is too slow for video editing
    External eSata or USB3 are both fast enough for video editing... eSata is better - http://forums.adobe.com/thread/1117813
    ONE possibility is this $47 USB3 dock with fan http://www.amazon.com/StarTech-SuperSpeed-Docking-Station-Cooling/dp/B0055PL2YI

  • Jumpy video render in Premiere Pro CS5

    Hey guys, I'm very new to the editing world of premiere and after effects and I have run into a couple of issues. Any advice would be helpful thanks! Here's what going on:
    I capture videos every weekend on 4 cameras (Canon XH A1s) in 1080i into Premiere Pro CS5 using the live capture feature onto a Mac pro with 2.8 GHz Quad-Core Intel Xeon, 8GB 1066 MHz DDR3 ram and two 1 terabyte (spelling) hard drives with a ATI Radeon HD 5870 1024mb and a black magic capture card. I have the new OS Lion. I am taking that captured video and color correcting it in Premiere Pro for now and experimenting with After Effects. The sequence in Premiere Pro is set to 1440x1080p and I am trying to render out the video using H.264/Vimeo HD settings or 1280x720 29.97 fps/ de-interlaced with audio AAC 320, VBR 1 pass, target bitrate at 5 and max at 7.
    Now along with the live capture I have in the timeline I also have another live capture video and some mastered audio files that I had to sync up with the live video. Also, there is a short 30 second video that was exported previously using the same settings.
    After getting all of this ready, I exported the video using the above H.264 settings. The rendered video is just over 2GB and 50 minutes long. The final product is jumping terribly every second of the video. I've tried rendering it out in Vimeo HD settings and just 1280x720 at 29.97 fps with high audio settings. Each time I've gotten the same results. ANY SUGGESTIONS????

    > The final product is jumping terribly every second of the video.
    What exactly do you mean by this? Is the video moving vertically upward once every second? Is the video stuttering in playback once every second? I'm just not clear on what you mean by "jumping terribly every second".
    Does this problem only happen with a specific output type or in a specific player, or does it happen when you export to another format or play the result in a different player?
    What exact version are you using? Have you installed the most recent updates?

  • Unreliable Video performance in Premiere Pro CS5.5

    Hi there all ..Since rebuilding my PC to replace the original rotating OS disk with an SSD, I have been having all sorts of hassle with Premiere Pro CS5.5... in essence, video is often (but always) choppy although the frame counter advances smoothly... Audio is OK
    The issue that causes me the most angst is the demand for hi speed transfer... Why is this needed?  Here is the root of my lack of understanding:
    I can record 113 minutes of 1920 x 1080 imagery at 25fps on a single 32GB Secure Digital card.. this represents a transfer rate of less than less than 5MB per sec.. So why can't my external G-Speed 4-drive bay (using a pair of drives in RAID 0) push data into Premiere Pro fast enough over a single 3Gb e-sata link fast enough to prevent choppy video??
    Essentials of the system are:
    Asus PT6 SE Motherboard
    Intel i7 920 @ 2.97GHz
    24GB Ram
    NVidia GeForce GTX 580 Video Card (3GB Video RAM)
    OS resides on a 500GB Crucial SSD
    Project Data on a GSpeed 4-bay eSATA drive.  Drive 0 and 1 configured as RAID0 (Drives 2 and 3 are RAID 1 and act as one of two backup locations)
    I have run the PPBM 5.5 tests and have the results. As simple as they are, I do not know how to interpret them :-)
    "539","81","52","9"
    Your thoughts would be appreciated on what insight I can derive from the test results and second, why the heavy duty emphasis on Disk I/O performance when 5MB / sec gets you full HD...
    Cheers
    Steve

    Hi  there Jim
    Well, I guess “Disk I/O - and 539 is simply horrible” gets nicely to the point   The first task is to find out which one since I presume the number combines performance time of Video and scratch disks…
    No disk approaches 90% capacity.. so that is out.  I do have one drive that is showing signs of getting flaky though it is not one used by PP…  Dodgy driver?  Hmm could well be.. I have HD Tune Pro..I will run it again and see what it comes up with.
    I had an email from Harm echoing your thoughts and he also provided me with a link to follow up..
    Thanks for your insight I will let you know what I find..
    Cheers
    Steve
    (PS If I don’t get this done before Chrimble, let me offer you Season’s Greetings )

  • Locked a Black Video Layer and Premiere Pro CS5 Hangs Up

    Ran into a problem whereby I have on Video Layer 1 a layer of Black Video about 30 minutes long.
    I have 2-4 additional video layers above and about 9 audio layers.
    When I locked Layer 1 which has nothing more than a premiere pro generated Black Video layer, Premiere Pro CS5 completely froze up, became unresponsiveand  not even able to move the CTI, particularly when I tried to zoom in on the layer.  However when I locked any of the other video layers, not a problem.  Hardly ever lock layers so didn't notice it before.
    Filed a bug report but was curious if anyone ran into this problem.
    Using p2 media
    Timeline preset is DVC PRO HD 60.  Using
    Windows 7,
    Intel 960 3.2GHz,
    2 disc Raid 1 system drive,
    3 disk Raid 5 for media,
    2 disc Raid 0 for media previews
    GTX 470
    24 GB RAM

    Nope, me neither.  Caught me by surprise.  Tks.

  • How to set your playback in Premiere Pro CS5.5 with Tascum 144 Audio Interface?

    I have an Audio Interface Tascum 144 and i want Premiere Pro CS5.5 to Play it from my tascum, except my computer speakers how can i change this setting?

    Go into the PPRO Preferences under Audio... In there select the TASCAM interface...

  • Why is my video on adobe premiere pro cs5.5 so slow

    On the editing page my video comes out very slow ( lags, choppy, etc...) even though the setting before i start a project is the same and my nikon d3100.
    Should i get a video card for my toshiba laptop ? or is there some other settings i have to switch ?
    Thank you.

    See this for one possible solution:
    http://helpx.adobe.com/premiere-pro/kb/nikon-d7000-footage-stutters-playback.html
    See this page for resources about making Adobe Premiere Pro and work faster in general: http://adobe.ly/eV2zE7
    We need to know a lot more if we're going to help you beyond these general answers. Please provide answers to the questions listed here:
    http://forums.adobe.com/thread/961741
    "FAQ: What information should I provide when asking a question on this forum?"

  • Trouble in video playback Adobe premiere pro cs6

    My video playback is not stuttering, I don't even lag, but my problem is, when i play the video at playback, at some point my footage rewinds a frame, but the sound is still the same, even if I export my video, the final output rewinds and replays at certain point, i'm at 60fps 1080/720p, I tried to render (pressing enter) previewing, changing fps, changing resolution, but i got the same issue. Thanks for the answer please help.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • Premiere Pro CS5 Playback and Performance Issues

    I upgraded (2) separate editing work stations to CS5 from CS4 about a month ago. I moved from 4 to 5 to try and get rid of some problems which both work stations were encountering.
    The problems since the upgrade are similiar: playback from timeline has intermittent audio drop out and video going to black during playback, (new one)-video locked up but audio kept playing-system hung and had to be rebooted.
    Also, when clicking around on the timeline or scrubbing the timeline, Premiere crashes.
    This type of performance on playout or timeline usage is consistent on both machines which have indentical setups and builds. None of this happens all the time but happens enough to causes problems with workflow. We edit on the work stations, dub files to playback system for air, and use a shared server to move files back and forth as needed but files are always stored locally instead of using straight from server.
    These machines are:
    Premiere Pro CS5.02
    OS  WIndows 7 Pro 64 bit
    12 GB Ram, DDR3-1333 (6-2GB modules)
    CPU Intel Xeon Quad Core [email protected] GHZ, 2 processors, 8 MB Cache
    500 GB SATA 2 hard drive, 7200 RPM, 32 MC (System Drive)...309 GB of space avail
    (3) 1 TB SATA 2 hard drives, 7200RPM, 32 MC (3 TB, RAID0 STorage) 2.16 TB of space avail
    Nvidia GE Force 9800 GT Graphics card, DUAL DVI, 1 GB
    REaltek High Def Audio, Drivers 6.0.1.5953
    (1) monitor in use
    output of system runs to ADVC-700 breakout box to feed playback system
    I have all of my software installed on C: (309 GB of 500 GB avail)
    I have all of my videos files stored on D: (Raid Storage with 2.16 TB of 3 TB avail)
    The only changes I've made since installing CS5 would be to change the auto save from 20 minutes to 60 minutes. Don't know if an auto save would cause an issue on playback as I've noted above.
    I'm not a computer whiz by any stretch of the imagination but I can follow directions if given for testing/eval.

    Do the PPBM5 Benchmark and send the results to me by PM, in addition to sending the results to Bill as indicated. I'll have a look at what might be going on here.

  • Premiere Pro CS5.0.4 -Will not play any video- reinstall didn't help

    here's my system info -
    Model: MacPro5,1, BootROM MP51.007F.B03, 4 processors, Quad-Core Intel Xeon, 3.2 GHz, 16 GB, SMC 1.39f11
    Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB
       ----------------I only use one monitor, 1920x1200, 32bit color depth
       ------------------No Capture Card, No Sound Card or I/O box
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Serial ATA Device: HL-DT-ST DVD-RW GH61N
    Serial ATA Device: TSSTcorp CDDVDW SH-222AL
    Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
      ----------  This  2tb Hitachi is my data drive -  there are 600GB free (33%)
    Serial ATA Device: OWC Mercury Extreme Pro SSD, 223.57 GB
       ---------This 250gb SSD drive is my system/application drive - 120GB free (50%)
    Serial ATA Device: OWC Mercury Extreme Pro SSD, 111.79 GB
    ------------this 125GB SSD  I use as a project-specific drive to serve up video very quickly when i'm generating Video material using the software VDMX
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1006, 0xfd300000 / 2
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x0220, 0xfd320000 / 3
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x5a100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x5a110000 / 3
    FireWire Device: built-in_hub, Up to 800 Mb/sec
      i've been using Premiere Pro for about a year and a half with no trouble, no crashes that i can remember.   I updated to 5.0.4 when it came out and experienced no problems.
    I have not made any changes to my system (drivers, programs, etc.) since the last time i worked with Premiere Pro with no trouble.  The only  difference is that i generated approx. 52GB of new video files (mov. uncompressed 32bit 640x480 resolution) that i was beginning to edit in to a music video.
    My current problem is:: there is absolutely no playback of video in 5.0.4.   not in the tiny project window preview,  not in the source preview, and not in the timeline/canvas window.   when i push PLAY, the button turns into a square STOP button, but nothing happens.   this is independent of project or file type.  The project i was working on when playback stopped is using uncompressed 640x480 32bit Quicktime files and one 44khz/16bit .AIFF file.   as a quick doublecheck, I just added a 640x480 Apple Intermediate Codec file and it also will not play back.   I opened older projects and none of them will playback.
    My problem started while i was working on a project.  I was working on the project for probably an hour and a half with no trouble.  Then it seemed to get a bit sluggish and i could hear the HD churning a little more.   After rendering out a short section (just under 10 seconds), PPro did not play back the just rendered (now greenline) section.  Immediate playback of rendered material was the default behavior, and this was the first time ever that the just rendered section did not play back.   I then discovered that no video would play back at all--in any of the windows.   I can scrub through all the video without any trouble--all the frames are there.  
    I shut down PPro, & restarted.  No change.   I restarted my computer.  No change. 
    Realizing that the problem was likely related to a lack of space on my data drive,  i deleted approx. 500GB of files off my 2 TB drive, leaving just under a 1/3 of it free.  i checked the drive for errors, and defragmented it.  Premiere Pro still wouldn't play any file from any project.
    The files are fine, they will playback anywhere else (several different file types involved in different projects).  The files are compatible with Premiere Pro (uncompressed VGA resolution Quicktime .mov), i was editing on the timeline with them for hours before all video playback stopped.   All other Adobe programs  (After Effects, Photoshop work fine).
    I tried to find an answer/solution on these forums, unsuccessfully.   After uninstalling PPro and reinstall (did not help), and entire Suite uninstall, Adobe Clean, and reinstall,  neither version 5.0.0 or 5.0.4 will play video --the no playback problem has persisted.
    I was running out of HD space --i had less room than i thought -- down to about 7% of free space, a bone-headed move on my part.  I'm not  surprised that playback performance got compromised due to lack of space.   But i'm shocked that the problem is persisting.   Fortunately, i had just backed up my entire system the day before.  (i've backed up many times before and this never affected PPro performance)
    i tried to "CLEAN" the media cache for the sequence but it had no effect  (in searching the forums, i saw somebody else have their 'crashing Premiere Pro' problem solved by hitting this button).  I just took a look in the user/application support/adobe/common/5.0 to look at the "Media Cache" folder and the "Media Cache Files" folder.   Neither of them are empty, even after hitting the CLEAN cache button in the main preferences 'Media' settings window.   I don't know if this is the correct behavior or not.   (i'd expect a "clean" command to empty the folder, but i'm not the programmer)
    This does not appear to be the ATI/5.0 problem that so many Mac users suffered (i was lucky to never have that problem).    Again, i've never had any problems with Premiere Pro over the last year and a half, until working on this latest project with the Hard Drive very low on space.   I'm 99.9% positive that's at the heart of the issue.
    I don't understand why a clean reinstall did not help in this regard.  The problem is clearly PPro specific.   I found one topic in the forum where someone else experienced this same "no video playback" problem, but there was never follow-up from the user saying whether or not his problem was solved (or what was done to correct the problem).
    I'd love to get some help--- seems to be a very rare issue, but right now, i can do no video editing.  btw,  i started a new project as well and imported a .mov file -- same problem, no video playback.
    the weird thing is that i can actually still edit video.  i just rearranged my timeline assets and rendered out a minute-long quicktime (Apple Intermediate Codec) .mov and it looks and plays as it should.    This is really weird.  I'm baffled -- there must be some way to fix this.   I don't want to have to go back to Final Cut,  certainly not when i've already paid for Create Suite 5 Production Premium and EVERYTHING works except for video playback in PrPro.
    thanks in advance for your help
    Message was edited by: magneticjak
    Message was edited by: magneticjak

    hello.   hey, thanks very much for writing back.  i got some good info with a search or two.  (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs,  OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
    what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
    from User /Preferences/Adobe:
    com.adobe.AdobePremierePro.plist
    com.Adobe.Premiere Pro.5.0.plist
    and from System Preferences:
    the file:  Adobe Premiere Pro Prefs
    and..
    /.../Premiere Pro/5.0/...
    AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
    Debug Database.txt
    Placeholder Preset.epr
    PostEncodeCmds.pref
    PresetCache.xml
    Trace Database.txt
    NOTE:
    of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but...  it seems to have worked.
    I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering,  so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
    hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
    happy editing,
    peace

  • Premiere Pro CS5.5 Playback problem (when mtulti tasking) (Mac)

    Hi,
    I have this very weird problem with preimiere pro CS5.5. I've only experienced this today and I've already restarted my mac a number of times and the problem still persists.
    Basically, I start up premiere then work on a project, I can do playback no problem, I scrub through the timeline there is audio working, I press the spacebar, the clips play no problems
    HOWEVER as soon as I switch (cmd-tab) to let's say Firefox or just even leave premiere for another window. Playback stops working, pressing spacebar won't do anything also even clicking the play button on premiere won't work. I would need to start premiere all over again. The program doesn't hang but te playback just stops working, when I scrub through the timeline, the video moves but there is no audio.
    I hope someone can shed light over my problem thanks.
    I have never encountered this problem for over a year ever since working on premiere pro CS5/ CS5.5
    I'm on a iMac 21.5 inch late 2010.

    I just had a similar issue (Mac OS 10.7.3) Premiere Pro CS 5.5.2 was getting very unstable, seemed like it was very sluggish. When I switched to another app, then back to Premiere, pressing Play or spacebar didn't do anything. However if I waited a long time, like a minute, it came back to live. I'm not sure what is going on with my Premiere Pro these days, but it seems like it's gettings slower for me. One thing I do is to use Cocktail to clean the system caches, the reboot, and it seems this temporarily helps Premiere Pro, but after a time it gets boggy again.
    Any advice on what to 'clear' to get PPro in an optimized state? I have a relatively older Mac Pro, 8 core but with 24GB of ram and nVidia 4000. It might be my imagination but it seemed 5.0 and 10.6 was faster and more stable than this, but who knows. Any advice is appreciated.

  • Computer Freezes during Playback, Render and Scrubbing in Premiere Pro CS5.5

    CPU - Intel i7 980 3.33GHz
    RAM - 12GB (6 x 2GB) Corsair XMS3 DDR3 1600
    PSU - 850watt Corsair
    Graphics Card - NVIDIA GeForce GTX 570
    C: Drive - 600GB Velociraptor (with only program files stored on the drive)
    OS - Windows Ultimate 7, 64-bit, Service Pack 1 (up to date)
    Adobe Creative Suite 5.5 Production Premium (with all updates)
    My problem occurs only in Premiere Pro CS5.5 and not with any other Adobe programs, including After Effects.  Playback, scrubbing, or rendering in my Premiere Pro timeline causes the computer to freeze.  When it freezes I cannot move the mouse, I cannot use the keyboard, there is no automatic shutdown, and there is no BSOD.  The computer just freezes, forever, and needs to be shutdown manually.
    This problem began a few weeks ago, only happening occassionaly.  Recently the problem has escalated to the point that I cannot use Premiere Pro CS5.5 for more than 30 seconds before it freezes.
    I have several different Premiere Pro projects saved to a 1TB WD Black Caviar HDD.  In some of the projects I am using Cineform converted .mov files and in others I am using the raw(compressed) footage directly from a Canon DSLR.  This dedicated harddrive has 60% free space.
    Mercury PLayback Acceleration is enabled, and I have been successfully using Premiere and the rest of the creative suite intensively since October 2011 with absolutely NO problems.  I cannot remember the system ever crashing once during this time period, until now, which is remarkable.  All software on my computer is legitimate, and there are no third party codecs installed.
    What can I do to fix this problem?  All help is extremely appreciated.  THANK-YOU!
    Drew Norton

    Thank you, Harm I will do this.  In response to the video card being a possible cause of the problem,  I moved forward and downloaded Furmark to test it.  When running Furmark the program crashes.  It gets going on the test and crashes, and apparently according to other websites this means my graphics card is not running at capacity.  Do any of you have experience with this?
    If it is as clean cut as a busted graphics card I would be very excited to know.

  • Adobe premiere pro CS5.5 Mercury playback engine with CUDA

    Hello,
    I am trying to turn on the mercury playback engine to use my graphic card (Geforce 9800 GT)
    I have modified that cuda_supported_cards.txt using my graphic card name and when I tried to save it it says access denied
    so I have copied that cuda_supported_cards.txt file to the desktop and modified it and replaced it back in to C:\Program Files\Adobe\Adobe Premiere Pro CS5.5   .
    After all this the mercury engine with cuda is not turning on
    Is it becasue my graphic card will not support to CS5.5?
    Please help me.....
    Thank you...

    Does your card have 1Gig of video ram?
    Also, read http://forums.adobe.com/thread/773101

  • What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks

    function(){return A.apply(null,[this].concat($A(arguments)))}
    bmiller0525 wrote:
    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks
    thats way too vague of a question... best what?  quality? size? playback?
    best quality then use high bitrate, small size use low bitrate.

Maybe you are looking for