No Video, Possibly Problem With Cable?

Sorry i this is kinda long, I don't know how I can explain it shorter!
I'm getting a strange problem.
Here are the steps that my computer goes through when I boot it up:
1. Gets to the 38 (from LED debug panel) and beeps. I think that this is a sign that everything is working
2. Keeps going through the different posts until around the 75 mark I have a choice:
--- If I just let my machine run, it goes back to 31: "Initialize onboard devices. Load Option ROM from BIOS to memory" and is stuck there.
--- However, If I press the delete key (which is the key to get me into BIOS) then it stays at 87: "Enter setup screen. BIOS setup if needed/requested.". Then, like I'm in BIOS, if I press escape then enter, it leaves 87 (which I'm guessing is BIOS) and goes to 31, like in the first option.
All this time, there is no video.
Because everything looks like it's doing all right (except for the video), as it makes sense that if there's no OS on a drive to boot into and the user doesn't access BIOS, that the computer should get stuck, I thought that the problem was probably with the video card.
I had another card on hand, also a PCIe card with the DVI port, so I tested that one as well, and it does the exact same thing as the other, so I'm guessing it's not a problem with my GPU.
I also know that my monitor works, as I've been using it or the past few months with my other computer. However, the only thing that's been changed with video is from using a VGA cable to a DVI one. There's no way to test with VGA with my current card, so I'm thinking that it might be a problem with my one and only DVI cable.
So, what do you all think? Am I right in my thinking? I'd rather figure out the source of the problem before buying another cable, just to test. Thanks a ton!

Wow I feel dumb.
For anyone with the same problem in the future, remember to press the button that changes from VGA to DVI ><

Similar Messages

IPod Touch 2nd Gen Video Out Problem with Apple Component Cable

I'm trying to get video out working with my iPod touch connected to my TV. Here's the information.
32 GB iPod Touch 2nd Gen
Apple Universal Dock (current version.)
Apple Component Out cable for iPod (current version that connects with a dock connector.
I've connected the component cables into the component video input on my TV. When I start playing any video (purchased off iTunes store in Standard Def,) I get a scrambled picture that appears to be the video, and no sound. I purchased the TV in South Korea and haven't gotten to test it yet on a TV back in the US. I have my video out settings with wide screen turned off and set to NTSC (South Korea uses NTSC.) I've also tried every setting combination, and switching the cable connections with the same or similar results. Sorry if a similar problem has been posted elsewhere, but after searching, I couldn't find any similar behavior. Any ideas on what might be the cause? I don't have any other component devices to check if the component on the TV is bad.

I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

Video out problem with Dynex 32" 720p TV

Hi folks. I bought my new Dynex TV a few days before New Years. It's great, really sharp, and I've had no problems with it. However, I do have a DVD recorder so I can record my games. Tonight, I attempted to use the A/V output on my TV and connected them to my DVD recorder (which plugs into my computer). I clicked "capture" and got an error telling me that a connection could not be established and that I should double check my cables. I could hear the audio playing through my laptop speakers just fine. I couldn't see the video, for some reason .
It's not the cables, I just took them off of my old TV to use them here.
What can I do? Should I return my TV?

What about output from a gaming console, like a PS3? Is that only digital sources or does it matter how the PS3 is connected to the television to determine if's its a digital or analog signal? Right now I get no output when I try to send the video of my PS3 to my composite video in on my computer's TV tuner card.

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

Possible Problem with quicktime causing itunes malfunction

i think the problem with my itunes is that the quicktime file is screwed up. i tried removing it on add/remove programs, but it doesnt work for some reason. any possible ways to fix this problem? i also tried downloading quicktime separately, but that didnt work either.

i tried removing it on add/remove programs, but it doesnt work for some reason.
do you get an error message when you try to uninstall QuickTime, shirish? if so, what does it say? include error message numbers if you're getting any.

Video component problem with "stage.displayState = StageDisplayState.FULL_SCREEN"

I’m creating the full screen project but facing problem with the video component. All other project scenes is working properly but when I come in my video scene my project is crashing. Giving error with black screen. Please give the solution.
I use in my first scene first keyframe
stage.displayState = StageDisplayState.FULL_SCREEN

i don't have any idea
after using the ( stage.displayState = StageDisplayState.FULL_SCREEN ) code my video component is not working and project is showing the black screen. i try to find but i didn't get any solution of this problem. can you please help me

FCP External Video Playback problem with HDV

Hey all. I just got the Canon HV30 HD camcorder and it is excellent. I am able to import the HDV footage to FCP no problem. I'm recording in 24p mode by the way.
I can't seem to get playback from the timeline back to the Canon so I can see the edited footage on the Camcorder's LCD screen. I've tried everything. All the settings seem to be grayed out. How am I suppose to get my edited footage from the computer back to tape? Help is much appreciated!
Greekappi

I'm not the person at our facility that does this, but we do it all the time. However we are using the Sony HDV decks, 25U or something like that.
I have also seen the stuttering video you described, I'm not sure why it does this on some projects and not others, it is very random. When it does stutter I render out a complete self contained Quicktime and then print to tape from that. However, I occasionally still have this problem with that? But it does seem to help more often than not.

Flip Video camera & problems with iMovie 08

If you are having problems with iMovie and Flip Video, here is the Flip Video email response on 27 May 2008:
Hello,
Thank you for your response.
We are not authorized to support third party applications, which is why we do not provide specific instructions regarding iMovie or any other third party application. We only support the Flip and the Flip program, while offering suggestions regarding other programs.
The Apple website also offers Perian as a workaround regarding audio on the Tiger operating system with the latest QuickTime. The latest QuickTime upgrade didn’t allow for audio playback of AVI files, which is why Perian is now offered as a work around by us and by Apple.
It seems as though you are able to playback your videos, as well as use them in outside applications. If this is not the case, and you are having issues using your Flip video or your Flip video program, feel free to contact us further.
Thank you,
Consumer Support
Pure Digital Technologies, Inc.
This is my email to Flip Video on 26 May 2008:
My MAC Updater downloaded the new QT 7.4.5 on 5 Apr 2008. I have been making movies in iMovie, and then posting them to YouTube. In the beginning I uploaded the movies as MOV files but soon discovered AVI files (larger file and longer time to upload) had more clarity when viewed on YouTube. Once the new QT 7.4.5 downloaded all my AVI files had picture, but no sound! I downloaded the Perian component as posted in QT discussions. The sound returned to the AVI files. However, when I Exported an AVI movie from iMovie the picture quality was worse than the MOV movie. There is something wrong with the new QT 7.4.5 when working with AVI, my AVI movies look terrible. These AVI files were all downloaded from my Ultra Flip Video camera with Flip’s codec 3vix. Flip is aware of this problem and acknowledged it last Friday. Flip says Apple is aware of the problem.
My MAC PowerPc G4 has performed well in the past two months when working with the Flip Video camera. So, at Flip Video’s suggestion I upgraded the operating system to OS 10.5 from OS 10.4.11. Flip Video says their camera works with OS 10.5. Once OS 10.5 was uploaded I soon discovered that iMovie 08 would not operate on my PowerPc G4, 1.86 MHz. The speed requirement for iMovie 08 is 1.9 GHz.
At this point of “spinning my wheels for nearly a month” with this Flip Video camera, I decided to purchase a new iMac. On May 2, 2008, I walked out of the Apple Store in Walnut Creek with the new iMac 20-inch: 2.66GHz. Now the Flip video camera should work and all my video problems solved. However, this was not to be.
When I attempted to Import Flip Video AVI and MOV files into iMovie 08 the files were “grayed out” and would not Import. None of my previous Flip Video files would Import. I tried making new Flip Video movies, they also would not Import into iMovie 08.
At another Apple Store, the tech suggested I download the previous version of iMovie HD. I did this and with hours of working through the different Export options I was able to create movies to post again on youTube. However, the picture quality of the newer iMovies has never approached the quality of my last post before QT 7.4.5 downloaded. Remember my problems started with QT 7.4.5. Well, my new iMac came with QT 7.4.1, I have not Uploaded QT 7.4.5 and won’t until Flip Video fixes this problem.
Examples of my Flip Video movies can be viewed on youTube at: sffoggydays. The last video with excellent picture quality was posted 6 Apr 2008 titled “A Day at the San Francisco Zoo, Chapter Nine, L-Taravel Ride to BART.” This video was made in iMovie and Exported before QT 7.4.5 downloaded. All the youTube Flip Videos made after 6 Apr 2008 have poor picture quality.
It is time for Flip Video camera to stop “passing the buck” to Apple. When manufactures of operating system such as Apple and Microsoft create newer and upgraded systems, it is the responsibility of the manufactures of applications to redo their programs for operating on the new systems. Here is where Flip Video is not accepting this responsibility to Mac users of their camera. The Flip Video application/codex/drivers need to be updated in order to fix the following problems:
- No sound on AVI files in QT 7.4.5
- No Import of AVI and MOV files in iMovie 08
- Poor picture quality for youTube in Export of iMovie HD
I like my Flip Video camera, want to continue making movies for youTube, and recommending the camera to others. The Flip Video camera people need to fix these problems for Mac users.

Hi!
I agree 100%!
I also purchased the Flip Video - was thrilled to see that they worked with Apple computers. I made several movies with it when I had my PowerBook G4. I went on a great vacation & took several once in a lifetime videos. Got home & couldn't wait to put them in my iMoive -06, burn them on my iDVD and sent them to several family members & friends. Before I got the chance, I had my system updater tell me that there was a new version to QT. GREAT, I thought, just in time for my vacation videos. Like you, after the QuickTime upgrade, I got video, but no sound. I was SICK about it! I also wrote to the Flip people & got a response somewhat like yours. I left the videos on my Flip which left no room for any others, but I didn't want to take the chance of losing them. After reading from Flip that it would work with OS 10.5 system, I talked myself into getting a new MacBook Pro. Came with all the upgrades iLife -08 and the OS 10.5.2 OK...finally, after months of stressing over losing the vacation videos, I had all I needed to save them! Of course the $2,000.00 price tag hurt a bit, but I deserve a new computer.
Well...I STILL can't get my priceless vacation videos edited and burned! I tried downloading 2 different programs that were supposed to help convert my Flip movies to something that would work, but they haven't. I could get it to work on my desktop with QT, but what good is that?? I want to make DVD's to send to others & save for my grandkids (if I ever am lucky enough to get some!)
I'm TOTALLY disgusted & feel I've wasted my money on the Flip Camera (that at one time I loved & was seriously considering giving them as gifts) the $2,000.00 on a new computer (that even though I do deserve, didn't REALLY need one yet!) AND I still have vacation videos that I can't share!
So... I agree! Flip should honor their word that is printed on the box & MAKE it work with all Apple computers. Surely they can find a fix!
TOTALLY disgusted with the whole FLIP/APPLE mess!
Oh, Flip also said they 'heard' that QuickTime Pro would work with iMovie -08 - although they haven't actually tested it themselves. NO THANKS!!! I've got WAY too much money invested in this stupid Flip camera!

Flip Video camera & problems with QT 7.4.5

If you are having problems with QT 7.4.5 and Flip Video, here is the Flip Video email response on 27 May 2008:
Hello,
Thank you for your response.
We are not authorized to support third party applications, which is why we do not provide specific instructions regarding iMovie or any other third party application. We only support the Flip and the Flip program, while offering suggestions regarding other programs.
The Apple website also offers Perian as a workaround regarding audio on the Tiger operating system with the latest QuickTime. The latest QuickTime upgrade didn’t allow for audio playback of AVI files, which is why Perian is now offered as a work around by us and by Apple.
It seems as though you are able to playback your videos, as well as use them in outside applications. If this is not the case, and you are having issues using your Flip video or your Flip video program, feel free to contact us further.
Thank you,
Consumer Support
Pure Digital Technologies, Inc.
Here is my email to Flip Video on 26 May 2008:
My MAC Updater downloaded the new QT 7.4.5 on 5 Apr 2008. I have been making movies in iMovie, and then posting them to YouTube. In the beginning I uploaded the movies as MOV files but soon discovered AVI files (larger file and longer time to upload) had more clarity when viewed on YouTube. Once the new QT 7.4.5 downloaded all my AVI files had picture, but no sound! I downloaded the Perian component as posted in QT discussions. The sound returned to the AVI files. However, when I Exported an AVI movie from iMovie the picture quality was worse than the MOV movie. There is something wrong with the new QT 7.4.5 when working with AVI, my AVI movies look terrible. These AVI files were all downloaded from my Ultra Flip Video camera with Flip’s codec 3vix. Flip is aware of this problem and acknowledged it last Friday. Flip says Apple is aware of the problem.
My MAC PowerPc G4 has performed well in the past two months when working with the Flip Video camera. So, at Flip Video’s suggestion I upgraded the operating system to OS 10.5 from OS 10.4.11. Flip Video says their camera works with OS 10.5. Once OS 10.5 was uploaded I soon discovered that iMovie 08 would not operate on my PowerPc G4, 1.86 MHz. The speed requirement for iMovie 08 is 1.9 GHz.
At this point of “spinning my wheels for nearly a month” with this Flip Video camera, I decided to purchase a new iMac. On May 2, 2008, I walked out of the Apple Store in Walnut Creek with the new iMac 20-inch: 2.66GHz. Now the Flip video camera should work and all my video problems solved. However, this was not to be.
When I attempted to Import Flip Video AVI and MOV files into iMovie 08 the files were “grayed out” and would not Import. None of my previous Flip Video files would Import. I tried making new Flip Video movies, they also would not Import into iMovie 08.
At another Apple Store, the tech suggested I download the previous version of iMovie HD. I did this and with hours of working through the different Export options I was able to create movies to post again on youTube. However, the picture quality of the newer iMovies has never approached the quality of my last post before QT 7.4.5 downloaded. Remember my problems started with QT 7.4.5. Well, my new iMac came with QT 7.4.1, I have not Uploaded QT 7.4.5 and won’t until Flip Video fixes this problem.
Examples of my Flip Video movies can be viewed on youTube at: sffoggydays. The last video with excellent picture quality was posted 6 Apr 2008 titled “A Day at the San Francisco Zoo, Chapter Nine, L-Taravel Ride to BART.” This video was made in iMovie and Exported before QT 7.4.5 downloaded. All the youTube Flip Videos made after 6 Apr 2008 have poor picture quality.
It is time for Flip Video camera to stop “passing the buck” to Apple. When manufactures of operating system such as Apple and Microsoft create newer and upgraded systems, it is the responsibility of the manufactures of applications to redo their programs for operating on the new systems. Here is where Flip Video is not accepting this responsibility to Mac users of their camera. The Flip Video application/codex/drivers need to be updated in order to fix the following problems:
- No sound on AVI files in QT 7.4.5
- No Import of AVI and MOV files in iMovie 08
- Poor picture quality for youTube in Export of iMovie HD
I like my Flip Video camera, want to continue making movies for youTube, and recommending the camera to others. The Flip Video camera people need to fix these problems for Mac users.

Flip video ( I just bought one) makes AVI files (AVI is a container like QT is one) using 3ivX. All you need is the free Perian codec and you can playback, edit etc. Export the to a MOV container which doesn't reencode them and you should have usable files.
They have a valid point - they supply software and they have no obligation to make their camera work in iMovie. Reviews I have read say it works OK in IM6 vs. the iLife 08 version. Note that QT doesn't work natively with DivX, WMV and you don't see Apple saying they are obligated to fix Quicktime. They like their codecs and they don't care about others any more than Flip does.
You can always open in MPEG Streamclip and export them to a non lossy codec like Animation and use those new QT files as well. Or DV as another format option.

IChat video conferencing problems with D-Link WBR-1310

Howdy,
I am having a few problems with iChat video conferencing. I use the D-Link WBR-1310 wireless router and a MacBook. My girlfriend has a MacBook Pro at her school which she connects to via ethernet. I connect to my router via wireless. The routher is connected to a DSL modem. iChat video conferencing tends to work sometimes but very rarely. I have DMZ on the router turned on as i read somewhere on these forums that it was recommended. I also have the Apple firewall turned off so my laptop is pretty much naked as far as security is concerned. Three other computers use the network One desktop PC connected directly into the router and two Apple iBooks which are connected via the wireless. The problem is that i keep getting error message -8. Can anyone please help?
Thanks in Advance

I'd start by verifying you have the most recent firmware installed on your router.
Next, start off by trying to test to a user that has no known issues: http://www.ralphjohnsuk.dsl.pipex.com/ContactTesters.html (Bottom of the page)
That will help pinpoint where the connection issue lies.
Once you can succefully connected, then you should set up a static ip address on your mac and port forward the necessary ports in your router. If you router supports UPnP, I'd try enabling the first.
I hope this helps!

A possible problem with parallel operation?

Hello everyone,
         I am working on a labview program that uses parallel execution, and I am running into a possible problem. Please bear with me, as sometimes it is difficult to explain things happening in Labview in text alone. This application reads data from a server that we have in one of our labs via an ActiveX component. This server is known as a TIU server. The server contains various data including part numbers, serial numbers etc. It sends this data out in three different signals. A sequence count, an ASCII high, and an ASCII low. The sequence counter sends data in the following manner. When the sequence count is 0 and both ASCII high and low are NULL, then a new part number sequence is about to begin. When the count sequence changes to "1", then the next two string charaters listed under ASCII high and ASCII low represent a number that is a "Function ID". There are several of these, and each function ID contains different information either a part number, a serial number, etc. Once this is read, and it is determined that you are looking at the correct Function ID, the next Count shows how many charaters are to follow, and then you read each set of two ASCII characters and concatenate them together until you build the entire ASCII sequence as one variable and the sequence is complete.
       There are several equipment cards attached to this TIU server, and each card is free wheeling it's data out. As soon as power is applied, it will continue to send out all of its function ID's sequentially (Function ID 0-9) in order, in a circular fashion at a 1 Hz. rate. A really strange system to be sure, but it is a limitation that I have to deal with. So now that I have laid a bit of the background on this, here is the problem. Occasionally, (maybe one out of 20 trys), the data seems to get slightly corrupted. For example, in the enclosed code, I ran it 40 times, reading the same part number each time. In theory, it should always be the same result. But it is not. I am wondering if there is an issue with running the "READ TIU SERVER.vi" in PreAllocated clone reentrant execution mode? Perhaps on occasion, one of the instances does not fully close, before another instance begins, and a few bits get flipped around? I suppose it is possible that occasionally the TIU server is actually putting out erroneous data (and I am actually reading everything perfectly), but it is a fairly mature system, and I have not gone down that path yet. I have included the .vi that I am using to read the server data "test.vi", and the "Read TIU Server.vi" that is set to Preallocated clone reentrant execution. In this example, the "test.vi" is only a single instance, but in the actual program, I am running 20-30 of these, as Preallocated clone reentrant execution as well. As there are 20-30 cards on each TIU server to get information from. I am hoping that this makes sense, and that I have laid it out in a logical fashion. Sort of hard to explain in text sometimes. Thanks for the help....
Attachments:
test.vi ‏123 KB
Read Tiu Server.vi ‏15 KB

Hi ,
      Thanks for taking a look. You caught me on the shift register, I had not gotten around to cleaning up a few things. However the "elapsed time" functions acutally are there on purpose. Unfortunately, it takes a VERY long time to get one of those part numbers, as only two ASCII characters are moved accross the bus at a 1 Hz. rate. I orginally had all wait statements, but I discovered that when you stop a while loop, it will continue until the wait timer has expired. With 20+ of these functions in parallel, it was taking upwards of 30 seconds for the program to finally end. From what I was reading on the forums of others that had that problem, a "elapsed time" function can be broken through, while a standard "wait" statement cannot. Now when I press the "STOP" button, the program ends almost immediately.
     This is not a standard piece of equipment that I am using, but I think the explanation is of how it works is fairly accurate. Would you have a guess as to why every so often the data gets corrupted? Other than the bus itself is actually putting wrong data out there? I suppose I should check that as well, but due to the slow rate of the bus, and the tools that we have, I will have to sit and watch it for a long time... Thanks...
Dan

Picture / Video capturing problem with Nokia 5233

Hi All,
I am facing a problem when I capture a picture/video with my new Nokia 5233 phone I bought yesterday.
1. When I try to capture a video, nothing is visible on the phone screen. I click on Record button and the shooting starts and then I click on it again and it stops. But I when it tries save the video it gives an error "Unexpected error occurred. Please restart your phone".
2. I reboot the phone. But I face the same problem. I face the same problem while capturing pictures.
I have tried following as a measure to solve the problem but no success till now:
1. Reboot the phone: tried it more than 20 times. Does not work
2. Soft Restart: Removed the battery for 1 minute and powered the phone back. Does not work
3. Restore Factory Settings: Restored the phone to factory settings. Does not work.
4. I checked my firmware version. Its 12.1.089, RM-625. I think no firmware upgrade is available at present
Please advise what steps should I follow to cure the problem.
Please also let me know in case you are facing a similar problem with your device.
Thanks a lot in advance.
Solved!
Go to Solution.

Went to Nokia care. They took 10 days... but could not correct the problem...
Then again left it there for 7-8 days... finally got my phone replaced...

6230i - connectivity problems with cable, infrared...

I have just had my phone replaced by my company as I was experiencing coneectivity problem. I have installed (and uninstalled) PC Suite and tried to connect my laptop to my phone. I get the following problems with each method:
1. Bluetooth - cannot authenticate phone
2. Cable - doesn't connect - nothing happens.
3. Infrared - I get a message telling me infrared is not supported.
This happens even though my laptop recognises something is trying to connect to my phone.
It's driving me insane!

Radders
Please check your device manager if drivers are installed. If no
then 1st uninstall PC suite. Connect your phone and re-boot. The windows ( I hope you are using 32 bit version ) will recognise a new hardware and will install all the required drivers. Please be patient till you get a pop-up telling your hardware is ready to use. Now install PC suite & try to connect.Message Edited by babdi on 13-May-200710:11 AM
If my post has helped you please click the white star on the right

Kt4v possible problem with bios 1.8 and hd

Any Idea anyone with this one.
system running well till the other day when hd went very slow even after defrag, install bios 1.8 and reset the bios and adjusting it for my setup. Come to check my harddrive with maxtor powerdiag 3.04 and could not find the drive or any other drives connected. In the bios setup the drive is present. I removed all drives, cdroms, etc except the maxtor main hd and tried again with the same result. After placing in an ata100 controller card in to a spare pci slot and plugged the hd on to it, that the software sees the drive. The test finished and show the HD to be fine.
The question is do I have a problem with the onboard contoller or with the new bios or both.
When I first got this MB I did the same test with the original bios and the hd connected to the MB controller and the software had no problem seeing that and other drive connected.
my pc
6712 mb kt4v
athlon 2700+
ti4200 graphics card
2 off ddr333 512Mb memory
floppy drive
sony cdrw
system software windows xp pro
hard drive maxtor d740x-6l 60Gb ata133

I'll stick with the V1.10, but I'd fell better if MSI showed me they actively update their systems by releasing updated BIOS files from time to time.
I can't sell a 15000$ storage system that doesn't recognise the CPUs installed. The customer would laugh and tell me to come back with a supported system.
Isn't this a VERY valid reason for wanting updates? Even if it only is an updated CPU list?
The only reason I tried this MSI board is that it was the only one available with my retailer at the time I bought it with 3 PCI-X 100Mhz slots. Maybe I should go with a Tyan Thunder next time. Tyan at least show some activity.

Possible problem with StringTokenizer?

Hi all
I am having a problem with StringTokenizer and I would like your comments.
This is a simple class to put the class path folders into an array:
import java.io.*;
import java.util.*;
class TestThis1   {
   public static void main( String plist[] ) {
      String value = System.getProperty( "java.class.path" );
      System.out.println( "\n" );
      System.out.println( value );
      System.out.println( "\n" );
      StringTokenizer st = new StringTokenizer( value, ";" );
      String valueArray[] = new String[ st.countTokens() ];
      System.out.println( "folders in class path: " + st.countTokens() + "\n" );
      int i = 0;
      import java.io.*;
import java.util.*;
class TestThis1   {
   public static void main( String plist[] ) {
      String value = System.getProperty( "java.class.path" );
      System.out.println( "\n" );
      System.out.println( value );
      System.out.println( "\n" );
      StringTokenizer st = new StringTokenizer( value, ";" );
      String valueArray[] = new String[ st.countTokens() ];
      System.out.println( "folders in class path: " + st.countTokens() + "\n" );
      int i = 0;
      while( st.hasMoreTokens() ) {
         System.out.println( st.nextToken() );
         valueArray[i++] = st.nextToken();
         System.out.println( st.nextToken() );
         valueArray[i++] = st.nextToken();
Output:
D:\java\Viewer_JPro\ckv7\classes\;D:\j2sdk1.4.0\Coroutine for Java 2002\Coroutin
e\Coroutine4Java.jar;D:\j2sdk1.4.0\Coroutine for Java 2002\JavaDDE\JavaDde.jar;D
:\j2sdk1.4.0\Coroutine for Java 2002\Java2COM\Java2COM.jar;D:\j2sdk1.4.0\Corouti
ne for Java 2002\JPrint\JPrint.jar;X:\JTOpen\lib\jt400.jar;X:\Java\wdt400tb.jar;
D:\j2sdk1.4.0\jre\lib\rt.jar;D:\j2sdk1.4.0\lib\dt.jar;D:\j2sdk1.4.0\lib\tools.ja
r;D:\j2sdk1.4.0\jre\lib\ext\Coroutine4Java.jar;D:\j2sdk1.4.0\jre\lib\ext\dnsns.j
ar;D:\j2sdk1.4.0\jre\lib\ext\jai_codec.jar;D:\j2sdk1.4.0\jre\lib\ext\jai_core.ja
r;D:\j2sdk1.4.0\jre\lib\ext\ldapsec.jar;D:\j2sdk1.4.0\jre\lib\ext\localedata.jar
;D:\j2sdk1.4.0\jre\lib\ext\mlibwrapper_jai.jar;D:\j2sdk1.4.0\jre\lib\ext\sunjce_
provider.jar;D:\j2sdk1.4.0\jre\lib
folders in class path: 19
D:\java\Viewer_JPro\ckv7\classes\
D:\j2sdk1.4.0\Coroutine for Java 2002\JavaDDE\JavaDde.jar
D:\j2sdk1.4.0\Coroutine for Java 2002\JPrint\JPrint.jar
X:\Java\wdt400tb.jar
D:\j2sdk1.4.0\lib\dt.jar
D:\j2sdk1.4.0\jre\lib\ext\Coroutine4Java.jar
D:\j2sdk1.4.0\jre\lib\ext\jai_codec.jar
D:\j2sdk1.4.0\jre\lib\ext\ldapsec.jar
D:\j2sdk1.4.0\jre\lib\ext\mlibwrapper_jai.jar
D:\j2sdk1.4.0\jre\lib
Exception in thread "main" java.util.NoSuchElementException
        at java.util.StringTokenizer.nextToken(StringTokenizer.java:232)
        at com.accuchekinc.util.TestThis1.main(TestThis1.java:25)There are 19 folders in the classpath. However the nextToken() method is skipping some of them.
Further st.hasMoreTokens() should prevent the loop from overrunning the list of tokens but doesn't.
Does anyone have any ideas? What did I do wrong?
Thanks all
Bill

while( st.hasMoreTokens() ) {
System.out.println( st.nextToken() );
valueArray[i++] = st.nextToken();
}It looks like you're calling nextToken() twice each
time through the while loop, but only checking to see
if it exists once. This would be better:
while(st.hasMoreTokens()) {
String tok = st.nextToken();
System.out.println(tok);
valueArray[i++] = tok;
Duhh............ Thanks! It was a long day.
That makes senses. It is not like say String.length() which returns a set value. Ask and learn.

No Video, Possibly Problem With Cable?

Similar Messages

Maybe you are looking for