No video preview after ati firepro driver update

good morning, after uninstalling old drivers I installed the latest firepro drivers 14.301.1019 . I now have no video playback in either preview window. (This is also happening in sony vegas 13.pro)
I have a windows 7 64 bit desk top PC with an ATI firepro V7900 card installed.
I can playback video files in other programs like TMPGENC mastering works, quick time player etc it just appears to be the editing programs that have lost the ability to playback files.
The files are a mixture of HDV files , ciniform avi and ciniform mov,
I tried a reinstall of sony vegas and that made no difference.
I have tried reinstalling the old drivers but it makes no difference.
Has anyone else seen this, or have a solution.
thanks John.

sounds like a driver problem since it happens in both programs. both have an option not to use the gpu for acceleration/rendering. i dont use amd graphics, but when you install is there an option to remove previous settings or clean install? you might need to uninstall all amd software, restart, and then reinstall. once in a while graphics drivers just dont install correctly in windows, and amd's software is known for its problems...

Similar Messages

ATI HD 3870 and gaming video corruption after 10.5.6 update

I have an early 2006 MacPro 8 core in which I replaced the factory ATI X1900 graphics card with the highly recommended ATI HD 3870 card. The upgrade went smoothly and now I can play Call of Duty 2 for Mac on my 1920 x 1200 display at the highest quality of detail and shading with no problems.
After upgrading my OSX to 10.5.6, I started having random video corruption while playing COD2. It appears as random magenta, cyan or green flashes with a screen-like texture in various parts of the display. It seems totally random. After speaking with ATI tech support and the great guys at Other World Computing where I bought the card, the determination was that the card was the problem. I sent it into ATI for a warranty repair or replacement. While waiting, I borrowed the same card from a friend and installed it. The same problem occurred.
I think the issue now tracks back to the 10.5.6 upgrade which according to Apple provided updates to the video drivers for ATI cards. Now I don't know how to go back to the previous drivers. I checked ATI's web site and there are no drivers available for download for Leopard.
Any suggestions?
Thanks.
Bud James

Backup - always - before you apply updates. Start using SuperDuper.
Wait for 10.5.7.
The first 8-core was 3GHz and came in March 2007. But you had the X1900 so that says it is pre-2008 (most that say "early 200x" mean Early 2008 Mac Pro).
Drivers are part of OS X bundle, there is no discreet driver package.
If you don't have a backup, make one, and then you are faced with fresh install or archive and install, and you may need 10.5.2 DVD (with the 8800 you can't boot from a system w/o getting a panic if it is lower than 10.5.2).

Dolby Home Theater V4 changed to Dolby Digital Plus after Realtek Audio Driver update Windows 8.1

Hi,I'm now using Ideapad Z510. After upgraded to Windows 8.1. I'd went to the Lenovo website searching for new driver update.
But, after i install the "Realtek Audio Driver 6.0.1.7023", the "Dolby Home Theater V4" is not running(audio sound not playing through).And, the "Dolby Digital Plus" is running instead of "Dolby Home Theater V4".
Then, when I try to reinstall the older version "Realtek Audio Driver 6.0.1.6954" from Lenovo website, the "Dolby Home Theater V4" is running again.
Truly, the "Dolby Digital Plus"'s sound is crisper and louder than "Dolby Home Theater V4". But the sound of "Dolby Home Theater V4" has more bass and more function (like Graphic Equalizer, more Intelligent Equalizer etc.).
Is this an update or what?
What should I choose?The newer driver (for Windows 8.1) or older driver (for Dolby Home Theater V4)? Thanks. (confused now) @@

Hi all
Could you try out DAA or DHTLightweight from my link and just install the Dolby software without overriding your Realtek Driver? I am not sure whether would it work, but worth a try. I have tried on Y460, W520 and G560 with great experience.
If the older Dolby software does not work with your existing Realtek driver, you could install the DAA or DHTLightweight with their driver to overwrite and see how it goes.
Thank You
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300 | Yoga Tablet 2 Pro
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet

R3D, RED files based project showing no video preview after reinstalling CS6. Solution!

Hello Friends,
I just came across with a problem which happened with my RED R3D RAW Files shot on RED EPIC Camera and managed to solve it in a simple click after wasting many hours, so thought why not to share this on adobe forum so others can save time.
Problem was :-
I made a project in Primer pro CS6 with RED RAW R3D files and later I had to reinstall CS6. Later when I tried opening my same project which consist of R3D RED RAW files. The project opened successfully but I red files was seen but with no video preview, importing the new RED files where working fine but the old files which was imported when I made the project they where not playing at all.
Solution:-
You can select all you RED R3D Files and go to source settings, Click Reload from RMD. Problem Solved!!!
I hope this small write up will be helpful to some of you out their.
Cheers,
Saurabh Pandey.

I have verified this problem. After Effects CS6, Premiere Pro CS6, and Adobe Media Encoder CS6 experience problems with RED .r3d files on Mac OS X 10.10 Yosemite.
More specifically, the ImporterREDServer process used by these applications is failing to launch or crashing. You may be able to import and use some .r3d files for a short time, but once the ImporterREDServer process crashes, frames from imported files won't be returned, and importing new files will result in error messages.
We are investigating the problem.
This problem does not occur in the CC or CC 2014 versions of After Effects, Premiere Pro, or Adobe Media Encoder on Mac OS X 10.10 Yosemite. If you do not have access to these versions, my suggestion for workarounds are to transcode the .r3d files to a different format (ex., QuickTime with ProRes or other high quality intermediate codec) or roll back to Mac OS X 10.9.

Epson R280 printer won't print after Apple Epson driver update

I have a 27" iMac running Mountain Lion. I use an Epson R280 printer to print directly onto CD/DVD media. Have used this printer daily for over three years. After an Apple Epson Driver update, I get a 'communication error' message and cannot print. Uninstalled and reinstalled printer. Power cycled printer and rebooted iMac. No Change. Hooked up same printer to my MacBook Pro running Mavericks and printer works. Ideas?

Thanks, Eric. I had tried that previously, but had no luck. I would add the printer back in after Reset, and it still didn't work. The real key step which I found from a previous solution was taking the existing print drivers in Library/Printers/Epson and trashing that folder and then emptying the trash. With those drivers gone, when I rebooted and then powered up and added the printer, Apple prompted me to download new drivers, and 'Voila!'. Back up and running. Thanks much.

I cannot play videos anymore after last adobe flash update

I cannot play videos anymore after the last adobe flash update. The screen shows "plug-in failure".

What system are you running? There's a problem with current Flash 13 version. You can download an earlier 12 version here: Archived Flash Player versions
OT

Sound not working after checking for driver updates and resetting bios

I am running a (HP Pavilion dv7-6c60us Entertainment Notebook PC)
I had muted the sound and did a system upgrad prompted by my HP assistant after logging on. Now when I try to get sound nothing happens. So I went out to the support site and checked for driver updates and none were found. So I then went into my system bios and reset it as stated in a support for sound not working and still no sound. HOW DO I GET MY SOUND TO WORK AGAIN?

From your models support page Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Video Playback After 3.1.2 Update

I have recently updated to 3.1.2 and now find that some videos, that played perfectly well before the update, are now pixelated and of a considerably lesser standard.
Is anyone else aware of this issue and is there any way around it?
Thanks in advance.

Your suggestion to reset and restore is much appreciated.
However, I wouldn't have labelled the video playback issue a bug before trying something so basic.
To review, just like to person who began this thread, when playing back videos on my 2G iPod touch using OS 3.1.2, any attempt to summon the video controls, after about the first 10 seconds of playback, does not work. The iPod offers no response to any gestures on the screen.
That the iPod's behavior (a) was not observed before the current OS, (b) has been experienced by other users with the same hardware and firmware combination, and (c) continues no matter how many times I reset and restore the device, sounds very much like a bug to me.
My apologies if I offended anyone with the question I posed at the end of my previous post, but it does seem that, in their rush to get stuff out to us, high-visibility glitches like this are becoming more frequent. Perhaps, with our ridiculously high expectations of Apple, we are in part to blame.

Equium A60 keeps restarting after ATI Graphics driver installation

I have installed ATI graphics driver from Toshiba, but when I restart the laptop, it won't boot up, keeps restarting just before surposed to go onto windows XP. Please help.

i have the same problem. It looks like graphic card stopped working in SVGA mode, it is possible to boot Windows by enabeling VGA mode or choosig save mode on F8 screen. Reinstalling drivers didn`t help. Even reinstalling Windows didn`t help:(
blue "screen of death" shows this
<...>
"The device driver got stuck in an infinitive loop. This usually indicates problem with the device itself of with the device driver programming incorrectly.
Pl.check <...> drivers updates.
Tech.Info
*** STOP: 0x000000EA (0x841C8508,0x8424D258,0xF7933CBC,0x00000001)
ati2dvag
begining dump<...>

System lockups/video corruption after adding hard drive

I have a first generation MacPro with an ATI video board. I recently added a 1 TB Western Digital "Black" hard drive, and I used Carbon Copy Cloner to duplicate the first drive onto the Black HD, which is now my new boot drive.
Ever since I did that, my system has become quite unstable and locks up frequently. What typically happens is I'll get a garbled single row of pixels in random places on the screen, and then within a few minutes it will lock up if I try to do anything that is graphics intensive such as using Expose's active screen corders to show my desktop, or opening a folder with dozens of different icons (like the Apps folder). It /seems/ like the problem is compounded when I am using FireFox, but that may simply be because I use it alot.
After the lockup the only way to regain control of the machine is to hold in the power button.
I've even gone as far as removing the original drive thinking that perhaps the system might be confused and is pulling drivers or whatever from the old drive. That didn't help.
Any thoughts as to what is happening here? It's seriously driving me nuts (not to mention wasting a lot of my time constantly having to restart the system).

Did you run Disk Warrior before and after cloning?
Repaired permissions?
Re-ran 10.5.7 combo update?
I'd even look in system profile - memory and see if there are errors showing (doesn't show errors from prior system boots though).
Cleaned out the X1900; add copper cooling kit $29, or look into another ATI card.
Before using any new drive, zero it. And if you have Windows and the drive is backed up or before you put files on it --- do a complete and thorough zero and extended test in Windows using WD's own Diagnostic utility - much better, reliable, and does map out bad blocks while Disk Utility and other OS X tools rarely do. But any new drive... I've had 3 out of 6 need such treatment.
As a test, reboot back on your original why not? I'd have done that just to narrow down the possibilities.

Video jumping after 1.1.3 update

Has anyone noticed that the video has started to stutter/jump when feeding video from the iTouch to a TV since the 1.1.3 update. It played perfectly fine using 1.1.2. I would flash it back to 1.1.2 if I could, but apple seems to be restricting this since they don't want people Jailbreaking iPods. Yes, I have tried the methods mentioned time & time again to restore the iPod to a firmware version older than 1.1.3, but so far no luck. I even tried it on several different computers and still no luck. Also it does this with videos purchased from iTunes as well as ones that I converted myself. Does anyone know of another way to restore an older firmware version?
APPLE - Please note that not everyone is trying to jailbreak their iPods. I am just trying to get it working like it was before.

I was using 1.1.3 and playing video on my TV and YES, I did get the stutter that you speak of. Since I hated this new BUG, I decided to downgrade to 1.1.2 again and I will tell you how to do it the easy way and it DOES work. I did it to mine and it was very simple.
1. Plug in your iPod touch and let it finish syncing in iTunes
2. Hold down POWER and HOME
3. Wait until the iPod disappears from your source list, then let go of POWER but, keep holding HOME
4. Then let go of HOME when the iPod appears back in your source list
5. iTunes should now detect an iPod in recovery mode
6. Hold down OPTION and click the "Restore" button and navigate to the 1.1.2 firmware on your hard drive. If you've downloaded it through iTunes, you'll find it in ~/Library/iTunes/iPod Software Updates
7. Choose the 1.1.2 file and restore your iPod to 1.1.2.
8. The bad news is, you can't use the Mail, Notes, Weather, Stock and Maps apps on 1.1.2 but, the video will play nicely.
Hope this helps.
I've sent a bug report about 1.1.3 and watching video on the TV. I hope they fix this VERY soon because I WANT 1.1.3 again but, I DON'T want stuttering video. By the way, you're the only other person that I've seen post about this bug... nobody else much watch video on their TVs from the iPod touch.

HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command
prompt...) DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because
it has no enabled devices associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then
restore the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command prompt...)
DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because it has no enabled devices
associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then restore
the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Impossible to open mail and preview after 10.8.2 update

Hi,
My mom has a macbook pro very recent, bought a month ago or so,
the preview app wanst working so I have updated the system to 10.8.2
now Mail.app doesn't launch neither preview and when I try top open the pref panes and access mail prefernces or icloud preferences, the pane closes.
any advice?
many thanks

EDIT: please remove all items from login items first
Go to
 > System Preferences > Users & Groups | Login Items
Select everything in the list and click the - (minus) button underneath.
Restart the mac and test to see if Preview and Mail.app work as expected.
Message was edited by: softwater

Video problems after 10.0.5 update

Ever since I updated to Final Cut Pro X 10.0.5, all of my video has a green tinge at various places during the playback. Not sure how to correct it. It happens on my existing projects and new video I import. Here is an image of what I'm seeing, but it changes constantly upon movement within the clips. Any help would be appreciated. I tried transhing preferences, but this didn't help.
Thanks,
Steve

Thanks Tom. that was it. I had my display calibrated to match my photo prints, so switching it back to default solved the issue.
Thanks again!
Steve

Powerbook video problems after 10.4.4 update

I'm getting increasingly frustrated with this update.
After updating (using the automatic updater), my Powerbook now displays noisy, flickering horizontal lines shortly after the screensaver activates. Fortunately, they clear up within a couple of seconds when it comes out of screensaver mode, but still very annoying.

Have you tried zapping PRAM and resetting the PMU?

No video preview after ati firepro driver update

Similar Messages

Maybe you are looking for