No video signal, but G5 works

Hi, newby here...
I've just received a G5 as a gift, without HD, but that's minor... I've placed one and was trying to instll 10.5. But the problem is that it sends no video signal to the monitor (an apple perfectly working one). Actually it sents (on the 30-40 startup tries) video signal 1 time: after again no signal. I've resetted eveything in every way (PRAM, NVRAM, PMU, SMU whatever, no signal). I can't believe it's the video card, because it worked one time. I've completely disassembled, cleaned and reassembled the new toy, but it shows no life sign to the monitor, but i can hear it works....
Can it be the battery?
What can I try? thanks all....

>GTX-680s in SLI
SLI is not supported, and may/will cause problems in PPro
Dual Card SLI http://forums.adobe.com/thread/872941
-problem http://forums.adobe.com/thread/872103

Similar Messages

  • No sound when playing videos/youtube but speakers work

    No sound when playing videos/youtube but speakers work. Mute is not on that I can see. Volume is maxed. Devices are enabled. Speakers tested. Have tried with and without headphones. 
    I tried to do a Driver Update but Toshiba Support doesnt recognize my model/serial numbers so I dont know what Driver to use. 
    I have a Satellite C50-05U
    Model number PSC12C-05U00S
    Serial number XXXXXXXXX
    I tried a restore from previous backup but it hasnt helped. any suggestions? 
    [Moderator edit to remove serial number.]
    Solved!
    Go to Solution.

    I tired this and it worked:
    Adobe Flash Player plug-in
    https://support.google.com/chrome/answer/108086
    Adobe Flash Player is directly integrated with Google Chrome and enabled by default. Available updates for Adobe Flash Player are automatically included in Chrome system updates.
    If you want to use Adobe Flash Player in other browsers, you’ll need to separately download the Adobe Flash Playerfor those browsers.Enable or disable Adobe Flash Player
    These instructions apply to Google Chrome on Windows, Mac, Linux, and Chrome OS.
    Type chromelugins in the address bar to open the Plug-ins page.
    On the Plug-ins page that appears, find the "Flash" listing.
    To enable Adobe Flash Player, click the Enable link under its name.
    To disable Adobe Flash Player completely, click the Disable link under its name.
    Note: If you've previously installed Adobe Flash Player separately, you'll see two files listed for the plug-in. If both are listed as enabled, the version bundled with Chrome will be used. To enable a specific version of Adobe Flash Player, clickDetails in the upper-right corner of the page. Then click the Enable link for the version of Adobe Flash Player you want to enable. The table below shows the filename for the version that is integrated with Google Chrome. more at the link above ..... 

  • Video freez but voice works

    when i try to video chat it works for 30 sec then the person im chating withs video freezez but audio still works great. i checked and conection says its fast. i also checked if my lap top had all requirerments and it does. I asked the other person and said it only does it when she chats with me,so its on my end. my video to her she said was perfect...anything else i can try ?  I also attached info
    Attachments:
    DxDiag.zip ‏9 KB

    Try to uninstall the currently installed Skype version and install the previous 6.14.0.104 version using the download links provided here:
    http://community.skype.com/t5/Windows-desktop-client/ASUS-USB2-0-Webcam-not-recognized-by-Skype-6-18...
    Make sure to disable automatic updates:
    Tools -> Options -> Advanced -> Automatic updates ->Turn off automatic updates

  • Can't Video Chat, but Audio Works Great

    Hey guys....I have been trying my hardest to get my IChat video feature up and running.
    The audio works great when conferencing and obviously the im works fine. Myself and the person I am trying to video chat with both are using AIM through IChat. Here is the error message I am getting -
    2009-04-06 13:53:14 -0400: No data has been received for the last 10 seconds.
    Audio channel info: local machine using 192.168.1.3:16402, expecting remote machine to send to 173.66.213.133:16402
    Video channel info: local machine using 192.168.1.3:16402, expecting remote machine to send to 173.66.213.133:16402
    If I restart my IChat and send a video chat invitation I can initially see the person on the other end. But, the picture then freezes (almost instantly) and then I get the error message.
    Any help would be very much appreciated. Thanks.

    Hi,
    Two possible things.
    1) Go to System Preferences > Quicktime > Streaming tab and set the speed to 1.5Mbps and relaunch iChat so it "sees" the new speed.
    2) Check your modem/router for any DoS (Denial of Service) or SPI (Stateful Packet Inspection) feature and turn it Off.
    Examples
    Netgears have either DOS or SPI in the WAN Page
    Netopias have this Feature as part of the Firewall when you use a setting higher than Low.
    Linksys tend to have the same in the firewall in the Security tab.
    Basically they can be anywhere in the set up pages as the manufacturers never put them in the same place.
    Both features examine incoming data to see if it is an attack.
    In an iChat video chat so much data can be sent from higher speed processors over high speed inter net connections that it is regarded by DOS as a attack.
    SPI tries to evaluate the validity of the data and tend to get overwhelmed (Simplified view).
    192.168.1.3 looks more like an IP from a Linksys than the other two examples.
    9:24 PM Monday; April 6, 2009

  • Frozen Video Playback But Audio Works

    I'm stumped tonight. imovie froze in the middle of a clip trimming. When it came back up the project will not play properly. The audio plays, but the video is frozen. I can skim through the video down in the events browser, but the project is worthless. Additionally, when I pulled up an old project it gives me the same symptoms. I've restarted multiple times. I've dumped the .plst....I don't have any ideas. I will reload the software, but does anybody have experience solving this problem? I've seem the question asked several times here, but no answers.

    As I posted today, just noticed this as well. Imovie worked just fine about 2 weeks ago.
    http://discussions.apple.com/thread.jspa?threadID=2298823&tstart=0
    can someone merge these posts? It seems like a recent concurrent issue.

  • Weak signal but aerial working

    My You view box has stopped working, displaying weak or no signal when turned on however the aerial plugged straight into the tv works just fine???

    Have you tried retuning?
    You aerial may have developed a fault due to age or weather and provide a strong enough signal for a single tuner TV but not for your twin tuner box.
    My daughter has just suffered a similar problem.
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • 5600FX S-Video signal but no Composite signal

    Hi,
    I have just build my new PC, MoBo MSI KT6 Delta, and graphics MSI 5600FX 128Mb, as you can see I like MSI,
    My problem, when I connect my TV (Composite connector) to the Graphic card(Conversor cable S-Video to Composite) I select in the nvidia options Monitor +TV, If I select in the TV options S-Video I see Black and White, this is normal(TV input is composite),  everything is fine, but when I select Composite I cant see anything on the TV  (BLACK),
    I always watch the PC on my TV with all the grafics I have had(4).
    I think that it is a hardware issue but before to change the gc for another one()  I would like to know if there is a solution to this issue.
    Drivers.. I have try with the last one and one version before, os XP Prof
    Thanks

    If it shows connected ... then check the Ip address under the same ... also you if are getting Ip - 192.168.1.X ... with gateway -- 192.168.1.1 ... try tro ping 192.168.1.1 ... if getting replies .... try to ping 4.2.2.2 & yahoo.com ....
    Check the results ...
    If you are not getting replies .... disable the firewall on the computer & then try to ping the gateway ....
    let me know the status ...

  • Firefox won't play sound on youtube video's but sound works in other applications

    i can play sound as usual on other applications such as media player, vlc, itunes etc... but firefox and internet explorer do not work, google chrome doesnt even work. i have re-downloaded flash player and the pluggins many times trying to fix it, cleaned out my pc with ccleaner, anti-virus checked and such. i just cant fix it. i have before but i forget how and it always happens again after a while, especially just after pulling out speakers or headphones from the jack.
    == This happened ==
    Every time Firefox opened
    == it just keeps happening, has been for months and months

    Try clearing the Cache in Firefox.
    Tools-> Clear Recent History -> [v] Cache
    or
    Tools->Options->Advanced->Network -> Offline storage -> [Clear Now]
    Youtube may have made some changes recently. Clear the Youtube cookie and refresh page if above does not do it.

  • No audio with video chat, but it works with screen sharing...

    I've got a friend who just upgraded to snow leopard. We're both using iMacs. My computer is working find, and I have audio and video with other people.
    When we video chat, there is no audio. When I screen share with her computer, with her seeing my desktop or me seeing her desktop, the audio works.
    No mute buttons are down, I've checked system preferences (sound) everything is right.
    Any ideas?

    HAs she checked that System Preferences > Sound > Input is listing and has her Mic Selected ?
    Is he r Volume high enough in the same place ?
    In her Video Menu is the "Microphone " Enabled" ticked ?
    In iChat Menu > Preferences > Video Section is the same Mic listed ?
    Do the response bars move under the Preview when she talks ?
    During a Chat in Your Connection Doctor (Video Menu) is she sending any Audio ?
    IS she showing as having a log more Bit Rate than you ?
    9:41 PM Wednesday; September 23, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • GTX 670 Power Edition gives no video signal

    Hoping somebody can help here. I've had a long string of problems which seemed graphics card related. Initially, the problem that Windows would reboot with no error message or warning of any kind about a minute after logging in. No problems in safe mode nor any problem if I set Windows to start in Diagnostic Mode. Advice at the time suggested doing a system repair from my installation CD but didn't have time to do this before going on holiday. On return, the problem had deteriorated (or a new problem appeared) - there was no video signal, not even the BIOS screen.
    At this time my graphics card was an NVidia GTX 580, motherboard a Gigabyte GA-X58A-UD3R, I-7 950 CPU, 850W XFX PSU.
    I ran through a host of tests to eliminate possible causes:
    1. Tried the card in all PCI_E slots but still no video.
    2. Tried another card (NVidia Quadro) in all PCI-E slots, system booted successfully with video and could login to Windows (difference here is the Quadro is powered directly from the motherboard).
    3. Tried a number of DVI cables with both cards, the Quadro worked with all of them the 570 stubbornly refused to give a video signal.
    Decided the problem was either the PSU or the GTX 580. Returned the latter under warranty and purchased the MSI GTX 570 PE. Installed this and again no video signal but ran through the above tests again with exactly the same results. However could now test the 570 on another system (could not try this with the 680 as PSU on my other system only had 2 6-pin PCI-E connections and the 580 required an 8-pin and a 6-pin power connection). The 570 at least produced the BIOS screen, booted Linux and presented a login screen. Didn't login as the PSU on this system was probably on the marginal side for wattage.
    Decided then that I had a strange PSU problem. It could power my PC with the Quadro, suggesting motherboard, CPU, RAM and disks were all OK but could not provide sufficient power for either the 580 or the 670 cards. Bought a new 850W PSU and have just installed this with the 670 card in and yet again I get no video signal. I am now stumped as to what the problem can be so would welcome any suggestions as to what may be wrong and/or what else I can try.
    Thanks,
    George

    Quote from: Svet on 16-November-12, 06:48:32
    then you should contact mainboard vendor about it as problem is not in the VGA.
    I had given what I thought was sufficient information about the PC spec in my first post. Both what I started with and what I'd changed. But I'll give the full spec here:
    Motherboard: GA-X58A-UD3R Rev 2.0
    CPU: Intel I-7 950 3.06 GHz
    Memory: 3x4GB Crucial DDR3 PC3-10600 • CL=9 • Unbuffered • NON-ECC • DDR3-1333 • 1.5V • 512Meg x 64
    Disks: Samsung 64GB SSD SATA System disk
              WD 1TB and 500GB SATA drives
    PSU: Coolermaster RS-850-SPHA-D3 80+ Gold - 3.3V:22A, 5V:25A, 12V:70A single 12V rail
    GPU: MSI GTX 670 2GB OC Power Edition
    OS: Windows 7 Professional 64-bit
    The changes were the PSU and the GPU. The problem started when I had an XFX Black Edition 80+ Bronze PSU and a Gigabyte GTX 580 GPU otherwise the rest of the spec was and has remained the same. With my original spec, it ran perfectly happily for almost 2 years but then started with the system rebooting without warning about a minute after login (it would stay at the login screen indefinitely). After running some tests the clues seemed to point to the GPU configuration having been corrupted in some way (from sfc logs). However, if I set Windows to Selective startup, I could login and the system would stay up. I decided to do a system repair from my Windows 7 installation disk but had to postpone this for a couple of weeks during which time the PC was powered off.
    When I next powered up the system, there was no video signal at any time. The investigation I did made me think either the GPU was faulty or there was a PSU problem - all other aspects of the system could be shown to work. I returned the GTX580 as it was under warranty and purchased the GTX670 with the refund. This exhibited the same symptoms as the 580 - no video signal no matter how long I left the system running. I was able to test the 670 in another system and it worked there. I couldn't run this test with the 680 as the PSU did not have an 8-pin PCI-E connector - just 2 6-pin connectors.
    I then added an NVidia Quadro card alongside the 670 and booted the system with this as the display GPU. This gave me a video signal at all times and more importantly allowed me to get into Windows and check if it recognised the 670 in Device manager. It did but reported a problem as, until now, I hadn't been able to load the 670 driver. I did this and rebooted - again no video signal during post and initial Windows boot but I did get video as soon as the newly installed driver was loaded. This is the state I'm in now other than I've flashed the vbios as suggested and the GPU no longer works on my other PC.
    Note, I can happily remove the Quadro and boot the system with just the 670, except I don't get any video signal until Windows has loaded the 670 driver - the monitor light stays stubbornly orange till that point. After that, everything seems to be fine - I don't get the reboots that this problem started with. The only other clue I have is with my original spec I always had a problem from shortly after building it where I would need to power cycle the system most times as I could not wake it from hibernate mode.
    I'm hoping this helps as I know I have run out of ideas of things to do. The only thing I have left to try is update the motherboard BIOS.
    George

  • Newest version Flash Player doesn't work online, but does work when using Dreamweaver files locally?

    Newest version Flash Player v 11.2.202.235 doesn't work when trying to view Flash video online, but does work when using the same Dreamweaver files locally?
    Win7/64, Firefox 12, 16 gb ram, core i3 @3.07GHz

    Define "doesn't work" - what do you see instead of the expected Flash content?
    Does that happen for any Flash object on the Internet, or only your Dreamweaver files?

  • Mac Mini boot issue, chime, but no video signal.

    Hello,
    I'm repurposing an older MacMini for use as a home media server.  The machine specs are as follows:
    2.53mHz//2x2G/320/SD/AP/BT
    I have: 
    1.  Removed Airport/Bluetooth card -- they serve another purpose -- the unit will be hardwired to my LAN.
    2.  Upgraded HD to 500 GB, and installed Lion.  Everything worked fine, I put the project on hold for a couple months to work on other things.
    I went to install the unit on the wall the other day.  Before I did I decided to power it on once more to check all was well before mounting it.
    All of the connections appear to be fine, however... when I power the unit on, I hear the chime but never get any video signal.  I've tried both:
    VGA output using Mini-DVI to HDMI Adapter -- my existing Apple TV supports and this is how I got Lion Installed -- so I know the cables are good.
    Worred that perhaps the Mini-DVI port was bad I also tried the:
    Mini DisplayPort output with a VGA adapter, same result.  I hear the chime and then nothing happens.
    My next steop is to attempt to SSH into the Mini from anther machine.  Before I go this route: Any ideas what I should be looking for or intermediate steps?
    Any help would be appreciated.

    I'd try the SSH and view the logs for last startup, or maybe Target Mode if SSH doesn't work.

  • Installed Premiere Pro CS4 but video display does not work?

    I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
    1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
    2) the UI is way too slow for my big beefy system.
    My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
    Any ideas how to solve this CS4 install issue?
    Ron

    I would like to thank Dan, Hunt, and Haram:
    The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
    My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
    My PC is brand new with the following "beefy" components:
    Motherboard
    nForce 790i SLI FTW
    Features:
    3x PCI Express x16 graphics support
    PCI Express 2.0
    NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
    DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
    Overclocking tools
    NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
    ESA Certified
    NVIDIA DualNet and FirstPacket Ethernet technology
    Registered
    CPU: Intel Core 2 Quad Q9550
    S-Spec: SLAWQ
    Ver: E36105-001
    Product Code: BX80569Q9550
    Made in Malaysia
    Pack Date: 09/04/08
    Features:
    Freq.: 2.83 GHz
    L2 Cache: 12 MHz Cache
    FSB: 1333 MHz (MT/s)
    Core: 45nm
    Code named: Yorkfield
    Power:95W
    Socket: LGA775
    Cooling: Liquid Cooled
    NVIDIAGeForce GTX 280 SC graphics card
    Features:
    1 GB of onboard memory
    Full Microsoft DirectX 10
    NVIDIA 2-way and 3-way SLI Ready
    NVIDIA PureVideo HD technology
    NVIDIA PhysX Ready
    NVIDI CUDA technology
    PCI Express 2.0 support
    Dual-link HDCP
    OpenGL 2.1 Capaple
    Output: DVI (2 dual-link), HDTV
    Western Digital
    2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
    Features:
    10,000 RPM, 3 Gb/sec transfer rate
    RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
    p/n: TW3X4G1333C9DHX G
    product: CM3X2048-1333C9DHX
    Features:
    XMS3 DHX Dual-Path 'heat xchange'
    2048 x 2 MB
    1333 MHz
    Latency 9-9-9-24-2T
    1.6V ver3.2

  • I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card

    I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.

    Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
    G5 PCIe options are listed here:
    http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html

  • My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premier

    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!

    Hi Bryan,
    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!
    Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
    Hope that works for you.
    Kevin

Maybe you are looking for