No video with mini dvi - vga adapter (2007 Macbook)

Connecting an external TFT display (Nokia 500 Xa) to my MacBook's mini dvi port with a mini dvi to vga adapter, there's no video.
Any ideas about what might cause this? the monitor is a bit old, but VGA should still be the same, eh?
I thought maybe it's the adapter's pin configuration... What exactly does the adapter let through?
Grateful for any ideas.

MacBook top-level
MacBook Display

Similar Messages

Mac mini 2009 . Mini DVI - VGA adapter with Monitor LG L1953S . No sleep .

Hi ..
Yesterday i started in the fabulous world of MAC with my brand new MAC MINI . The problem that i have is that when the MAC mini is in stand-by the monitor is not in sleep state , and i get in the monitor screen " check cable " . So i have to disconnect manually the monitor when mac is in sleep state .
I am using mini-dvi to vga adapter (original mac ) .
¿What is the problem ?
Thanks a lot ...

DVI-I provides the direct Analog signals needed to get VGA using a very simple adapter.
DsiplayPort (and its Mini variant) requires a converter to produce VGA or Dual-Link DVI, and the converter must be active/powered. There is a lot of logic in those converters. It may also have additional limitations.
In general, you should hook your highest resolution, most demanding display up with the DVI to VGA adapter.If running two Mini DisplayPort displays, ALL MiniDisplayPort converters must be active/powered.

Mini DVI -- VGA Adapter

When you insert the adapter into the iMac...isn't the screen supposed to flicker and adjust or something? When I plug the appropriate VGA adapter into my MacBook Pro, the screen flickers and adjusts and sends a signal just fine. The iMac - not so much. No reaction at all to having a mini DVI to VGA adapter plugged in. The result of this is no image appearing on the tv. Is there a way to test the mini DVI port on the iMac? Unfortunately, the only thing I may be able to do is find someone else with an iMac and try the adapter on their computer.

Hi BMBell1919
Do it the other way around!
1. Connect the VGA cable to the TV.
2. Connect the Adapter to the VGA cable.
3. Then connect the Adapter to the iMac.
See the Tip in > http://support.apple.com/kb/TA23844
{quote:}Tip: To make sure that your iMac automatically detects the external display or projector, be sure you plug the adapter into the external display or projector before you plug it into the iMac.{quote}
Dennis

Can you edit videos with after effects on a 2007 MacBook?

I was just wondering if I was able to edit videos on after effects with a 2007 MacBook.

After Effects requirements > Adobe After Effects CC for Mac, Windows, PC - Tech specs
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7.4 or v10.8
4GB of RAM (8GB recommended)
5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space for disk cache (10GB recommended)
14400x900 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Graphics card from list below with at least 1GB VRAM for GPU acceleration of ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*

Using Mini DVI to VGA adapter on MacBook

I bought the adapter from Apple & hooked up my LCD monitor to the MacBook, but the video I get on the monitor is different that on my laptop. It has an old screen background & the dock but nothing on my desktop shows up. Also, when I'm plugged to the monitor, my dock disappears on the laptop screen. Is there some setting I need to change? It worked fine with my G4 PowerBook.
Thanks for any help....
MacBook Mac OS X (10.4.6)

i use the mini dvi-vga adapter in my classroom almost everyday. It sounds like your new monitor is running as a side by side monitor to your display instead of a "replacement" display.
To get your projector/monitor to basically show whatever is on your macbook screen once you've hooked up press F7....this should make your projector/monitory become your display with your dock & all of your desktop stuff. Your new monitor will completely mirror your display.
THis should do what you're looking for.

IMac CD with mini-DVI - Video adapter woes

I bought a mini-DVI to video adapter when I first got my iMac Core Duo. I never used it, and so a few weeks ago I was distressed to find out that it didn't work. So I ordered another, assuming the cable was the problem. Nope -- this one has the same trouble.
The problem is that the display is distorted and "rolls" occasionally like the V-Hold is off. There are also two black "bumps" or places where there are waves in the display, one on each side of the TV's tube. The TV itself is a little 20" Orion -- not too new, but not too old either.
* The TV should be fine, since I've used it with a mini-VGA to Video adapter with my previous Mac, an iBook G4.
* The cables should be fine, because I've switched them all out and tried different ones.
* The adapter should be fine, since I ordered another cable and it displays the same thing.
* The computer should be fine, since I can output to an LCD monitor with my mini-DVI -> VGA just fine and dandy.
So does anyone have an idea of what the problem might be? I'm really perplexed, and I don't think I'm missing anything obvious. Like I said, I've used a couple of similar cables before without problems, my iMac is otherwise flawless, and so on.

I reinstalled the OS to see if that solved the problem. It didn't.
I tried to get an appointment with an Apple Genius, but apparently the Concierge was experiencing a large amount of traffic and could not help me. I don't really understand if I'll be charged for calling tech support (I'm out of the 90-day period, but obviously not out of warranty), so I don't particularly want to drop any money for support on a computer that apparently arrived lacking a significant feature. Unless I'm greatly mistaken, that's also known as DOA...

Samsung P400 Projector not working with mini-DVI to VGA

I've never had so many hardware problems with a computer before... sigh.
Why they labeled a 100-240v 50/60Hz power supply with a sticker that says 100-120V 60Hz is beyond me (Sony did the same with their original US PS3s but that's another tale). Anyways, here's my issue.
I just bought the new 2009 Mac Mini along with a Samsung P400 Projector. This is one of those new pocket type with the LED bulbs.
The Samsung P400 has a native resolution of 800x600 60Hz and can accept analog composite or VGA video signals.
So, in my blind belief that Apple would sell me the correct adapter to go from mini-DVI to VGA, I went and I purchased said adapter. And lo and behold, it doesn't work.
Now, I'm a computer guy, I've built my own systems. I know the difference between analog and digital, DVI-I and DVI-D, etc. So, when I read the specs on my merchandise and they all use the same connection labels DVI, mini-DVI, VGA, etc. it really irks me to find that they are all incompatible with each other. I don't understand how this is supposed to help the customer. It's ridiculous. Apple is supposed to be user friendly but this is downright evil.
But, I've invested over a thousand dollars in this venture and I want it to work. *SO, before I go and run out and spend another $30 on a mini-DisplayPort to VGA adapter, can anyone tell me if it will work with my projector????*

Thanks for your help.
But I had just figured out a solution today. I guessed that the resolution wasn't holding when I switched monitors so I went and picked up a mini-DisplayPort adapter to run the monitor along side the projector at the same. This way I could see what was going on.
Turns out that projector was automatically being set to 1600x1200. I changed the resolution to a lower one and it was fixed. Of course, when I tried to switch back to the mini-DVI to VGA adapter, OS X forgot the settings again and I had to redo everything.
I'll try your solution as well but for now, I think I am okay. I will just use the mini-DisplayPort to VGA and not unplug the projector unless I really have to.
I'll test your solution just in case I need to reset the resolution again.
Thanks once again!!!
Message was edited by: BakaBaka

Mac mini with minidisplayport to vga adapter: display does not sleep

I have a late 2009 mac mini. When using a mini displayport-vga adapter from Apple, whenever the mini puts the display to sleep the video goes black and my monitor goes into test mode (not sleeping).
It's almost like the signal to tell the display to sleep is not passing through the adapter. I have a Dell 2007WFP.
It works correctly with a minidvi-dvi adapter, but I have another computer connected via dvi so I would like to keep the mini on vga.

The dell would not go to sleep, ever.
For anyone else having the same issue, I got it resolved. I got another VGA cable and it now works perfectly. It is possible the cable I was using was older and didn't have a required wire or maybe was broken.

What is the correct adapter to connect my Macbook pro with mini-dvi to my TV with Scart

I have a MacBook Pro with mini-DVI and I want to connect it to my TV which has only a scart thing.
Can I use the mini-DVI to Video-Adapter and then a Video to Scart-Adapter?
Thanks for your help!

So of course you've corrected the title : "What is the right PLUG to connect my macbook pro to my TV ?"
OK so a bit more info : my TV is a Sony Trinitron TV.
It has the yellow/red/white plugs. I don't believe it has anything more sophisticated or recent than that.
Thanks for your help !

HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
You might try a 3.5mm to RCA adapter
from the Mac Mini's headphone jack to the TV's audio input,
but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

No audio with mini-DVI to HDTV

Hi - I know this is a tired discussion but I haven't been able to find an answer. Can you help?
Here is my tv: http://www.lg.com/us/tvs/lg-42LE5400-led-lcd-tv
Here is a picture of the back of the tv:
I have a late 2007 (3,1) Macbook and an LG LED LCD model 42LE5400 tv. I'm trying to get audio and video to the tv. Video works perfectly but I have no audio.
I have a mini-DVI adapter connected to a HDMI cable running to the HDMI1 spot on the tv.
I also have a male-male audio cable with a y-RCA adapter (red and white ends).
I understand that the HDMI cable won't carry audio through the mini-DVI and that I may need external speakers but I want to explore all the options before resorting to that, since I don't have a stereo sound system. I do have some cheapie desktop computer speakers, however.
So. Which jack to I plug the audio cable into? I've tried lots of things, including the regular headphone jack. Still nothing.
Thanks for any help!
Sara

Here is the solutuion! This is a picture of the correct placement of cables, making it possible to watch an older Macbook on a newer tv.
First, the details:
The laptop: regular old Macbook 3,1, late 2007 running OSX 10.5.8
The tv: a now discontinued LG model 42LE5400. It's a 42" LED LCD.
The cables and adapters: I purchased this set of cables online. It was pretty reasonably price, but I'm sure the same ones are available on Amazon for less. This link is for cables specific to my computer, make sure to choose the ones that'll work for your system.
http://www.macbook2tv.com/p/mac-mini-dvi-to-hdmi-kit-with-audio.html
The kit comes with a mini-DVI to HDMI adapter, an HDMI cable, an audio cable with standard 3.5 ends, and a Y-like RCA adapter (red and white connectors). I didn't need the RCA adapter.
Attach the HDMI cable to the mini-DVI adapter and plug it into the mini-DVI port on the Macbook. The HDMI cable then runs from the computer to one of the HDMI inputs on the tv.
Plug one end of the audio cable into the headphone jack on your Macbook. The other end goes into the RGB/DVI input on the tv.
Turn on the tv, select the HDMI input and after some flashing screens you should be set!
Hope this helps!

Macbook mini-dvi -- VGA projector problems

Hi
At the school i teach at we have problems hooking up our new macbooks to one of our projectors. We use a mini-dvi --> VGA cable to hook up the projector. The mac recognises the projector and it gets listed under screens, the resolution also changes. But no picture is beeing projected by the projector.
If we use a mini-dvi --> s/video/rca cable it works fine, but the quality of the picture is too low. The projector works nicely with the older macs we have, wich use the mini-dv --> vga cable.
Any toughts on what may be the problem, or what we could try?

I am having the same problem. I have to do powerpoint presentations at college and it was so embarrassing to go up there and my macbook not sync up. It use to work. I even bought a new adapter. It did not fix the problem. All the windows laptops were able to sync up to the projector but mine did not. This one one of the main reasons I bought a macbook. I need to take my work to school and connect to projectors. I am using the mini-DVI to VGA adapter. There appears to be no physical damage. When I click detect displays nothing happens. Now I have to redo everything on windows. Please, I hope someone has a fix for this. I am using the following; 2 GHZ Intel Core 2 DUo, 1 GB RAM, Mac OS X 10.4.10

Mini dvi-vga problem - Need help

When I connect my mac mini to a 32 inch Samsung HDTV via a dvi-vga adapter, the source is not recognized. I jsut get a black screen. However, when I connect it to the HDMI port, it works great. But, I wantto use the HDMI port for the Television source, not the computer source.
Any ideas?
Thanks

Did you get the mini-DVI to VGA adapter from Apple? Are your other cables okay?
Perhaps a mini-DVI to video adapter would be a better choice for you.
~Lyssa

No widescreen modes available using dvi-vga adapter

I have a sony gdm-fw900 24" widescreen CRT monitor and just bought a new mac mini (1.66 dual core, 1GB etc). For some reason the mini does not detect that this is a widescreen monitor so all i get are standard 4:3 resolutions in the display system preference. I'm connecting through the standard white dvi-vga adapter that came with the mini.
Is there a way to enable other resolutions? I want to run it at 1920 x 1200
Thanks in advance,
Shay
Mac Mini 1.66 Dual Core Mac OS X (10.4.7)

Thanks for the expertise, its just that I'm buying a 26" Sony Bravia for my bedroom when I save up enough which will serve for my Mac Mini, (via vga), and for my PS3 (via HDMI when it is released). It would be ideal for the Bravia to have a DVI connection of that of a monitor, however I still think that VGA is a sound connection as I have seen in pictures off 123MacMini.com of users having connected that way.

HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

mini graphics to vga adapter for macbook how to install in windows 7.
i have macbook with windows 7 operating system.

Can you be more specific?
What are you trying to do?

No video with mini dvi - vga adapter (2007 Macbook)

Similar Messages

Maybe you are looking for