No videosignal after putting 200 FSB

I wanted to o/c my athlon xp 2600+ to 11.5x200. But when i did save and exited bios everything booted even my gpu... i heard the fan starting to spin
but no videosignal ... i mean my screen keeps standing on standby so i was like hmmm maybe its the psu so i toke off the fan my hdd/dvd/cd still no signal so is it the RAM or ? ram info below... right out of aida32
Module Name    Kingston K
Serial Number    702C2100h
Module Size    512 MB (2 rows, 4 banks)
Module Type    Unbuffered
Memory Type    DDR SDRAM
Memory Speed    PC3200 (200 MHz)
Module Width    64 bit
Module Voltage    SSTL 2.5
Error Detection Method   None
Refresh Rate    Reduced (7.8 us), Self-Refresh
Highest CAS Latency    3.0 (5.0 ns @ 200 MHz)
2nd Highest CAS Latency   2.5 (6.0 ns @ 166 MHz)
Memory Module Features
Early RAS# Precharge    Not Supported
Auto-Precharge    Not Supported
Precharge All    Not Supported
Write1/Read Burst    Not Supported
Buffered Address/Control Inputs    Not Supported
Registered Address/Control Inputs   Not Supported
On-Card PLL (Clock)    Not Supported
Buffered DQMB Inputs    Not Supported
Registered DQMB Inputs    Not Supported
Differential Clock Input    Supported
Redundant Row Address    Not Supported

^_^ hehe well lets say if you give me the €100+ ill get an enermax
not really a big choice to pay €100 and get 350 W
btw temps r 51C after playing battlefield 1942 for a h or 2-3 40C-45C when idle surfing listing music that kind of stuff

Similar Messages

KT6V-LSR 200 FSB overclock doesn't take?

I'm running the following hardware...
KT6V-LSR
2100+ 0248 T'bred B
512Mb Corsair PC3200 C2
Slapped everything together, booted up, loaded the defaults in BIOS, then immediately changed to 200x10 (which I knew my chip and memory would have no problems with) and restarted. Worked great, right out of the box!
So I wanted to find out how high I could take the FSB (to compare to my nForce2 board in my other system) and was able to get it up to 230 FSB after lowering memory timings to 2.5-3-3-6 and increase of vDIMM to 2.75
I thought this was pretty darn good considering a 233 FSB would need a 7:2:1 divider (which of course isn't available) to keep the AGP/PCI in spec. But when I ran CPUz from within Windows (also verified with the MSI Core Center) it shows my FSB stuck at 200?!?
It does display the correct multi that I have set in BIOS, but regardless of what I have set FSB to (from 200 up to 230 in 5Mhz increments) the BIOS saves the settings, POST displays the increased CPU speed, but Windows utilities show the truth... still running at 200 FSB.
I have the Dynamic overclocking disabled in BIOS since I wasn't familiar with that and would rather have manual control over my overclock anyway. As I said, I did have to reduce memory timings in order to get the board to POST once I got over 210 FSB, which leads me to believe it really is trying to run the thing at the FSB I've set. Otherwise, you'd think I could put it up to the max 280 or whatever if all it was going to do is stay at 200.
I'm using the latest BIOS release available. Anyone else encounter this strange event trying to use >200 FSB?
[size=10]NF7-S 2.0 | 2400+ M @ 2.6Ghz (225x11.5) | 2x256 Ultra PC3500
KT6V-LSR | 2100+ @ 2.3Ghz (200x11.5) | 512 Corsair PC3200 C2
KM4M-L | 2500+ @ 2.2Ghz (166x13) | 256 HyperX PC3000[/size]

Quote from: expert on 21-August-04, 08:24:10
Have you ever checked your PCI and AGP frequencies at Sisoft sandra or another 3rd party software when fsb is set to 200 mhz.
There is a problem, this moron mainboard doesnt give standard PCI and AGP frequencies when CPU's fsb is set to 200mhz or higher.
Look in that program and you'll see that when fsb is 200mhz PCI is 41 mhz.This is a realy realy big handicap to make overclock.
This mainboard is not a good mainboard.Clear Cmos jumper's position is the worst ever that I've used lots of MOBOs.
there is no AGP/PCI divider at 200mhz or above.This moron mainboard uses AMI bios that doesnt support AMD CPU Mobile modding and using up to 24X multiplier.
-'s are
1.there is no PCI/AGP multiplier at 200 mhz
2.ClearCmos jumper's position is bad.
3.AMI Bios sucks.It must be Award Bios.
+'s are:
1.there are 3 fan sockets on mobo.
2.doesnt have any stability problems.
3.This mobo is only for standard users.
lock my spect ....sempron 2200+ @ mobile
in kt6v
Bios AMI not is suck ,is better max multiplo L6 in MoD mobile
now 12x 200fsb (pci/agp frecuencia ok ....33,3 pci) 2vcore

200 fsb????

hello, I am hoping that someone on here will be able to help.
I am currently running a barton 2500 in a K7N2 (184*12.5)
corsair 2700 ram. Then yesterday my mushkin 3200 ram arrived, fitted it, went into bios, reduced multiplier to 11 and upped fsb to 200 set to run syncronously. The system posted into bios but windows won't boot. It will run if fsb/dram ratio is set to 6:5 but there is no performance increase. I even installed a formatted hard disc and tied to install windows but after the blue setup screeneverything went blank.
It was my understanding that this board will run a 200 fsb can anyone give me any ideas as to what is wrong. (latest drivers+bios installed)

Quote
Originally posted by gazzol
Thanks for replying (both of you) firstly it doesn\'t matter what the multiplier is set to, it won\'t run 200fsb at all, I even tried taking the multiplier down to 7, still the same. The cpu voltage is currently @1.84v, the hs+f are seated correctly as temps are cpu 36, system 33 (side of case off) and the north bridge is fan cooled, oh and the ram voltage is 2.7 volts.
current set up is barton 2500, MSI K7N2, 512Mb of corsair 2700 settings are 180fsb (1:1) 12.5 multiplier and it runs stable. It just won\'t run at 200fsb @1:1 with the new ram.
I was wondering if anyone on here is running this fsb on this board in sync.
Hi!
I've had the same problem, but now I've 11 x 200MHz with Barton 2500 1:1 with Kingston HyperX PC3000 (even 11,5x200 is quite stable, but not pass 3DMark2001)
Try to decrease your DDR voltage to 2,5V.
I had plenty errors at 2,7V at GoldMem test - thinking this way I increase my RAM possibilities. After long time just for fun I only set 2,5V and there is no error at all.
Maybe its because of RAM overheating - I'm not sure
JareQ

IPhone 6Plus on every reboot after putting in my password it opens to a small window asking for apple id password

everything works on phone and wow it's big compared to my iPhone 5s. went with space grey since i have had 3 white phones in a row. restored via iCloud backup. updated iTunes as i have about 3,000 songs. 250 bought the rest ripped to AAC from my cc's....what a pain but switched from my windows desktop to this new rMBP late 2013 for xmas and iTunes is slightly different on a mac than windows and where everything is stored on drive.
anyhow problem is every time i reboot after putting in my password and arriving at whatever page i left at i get a very small window asking for my Apple id password. Now the top half is pre filled in with the email address i use for iCloud/itunes/apple/etc.
i did see in settings there is a checkmark i cannot remove that says for apple password "ask immediately" there are no other choices. it can't be unchecked by any method i found.
any help appreciated.

In case anyone else gets this I hit cancel once and it has never come back.

After iOS 8 update doesn't sign in my FaceTime and email account keeps saying incorrect password even after putting right password I tried reset option already still says the same incorrect Please Help

After iOS 8 update doesn't sign in my FaceTime and icloud email account keeps saying incorrect password even after putting right password
I have already tried reset option already still says the same incorrect Please Help

Hi Go to settings Email Accounts Delete Email Account then Re add acount back again If you have more than one Email Account do this with each one. Cheers Brian

Sometimes after putting my iMac to sleep, I can't get it to wake up and have to turn it off at the mains. Any ideas why?

Sometimes after putting my iMac to sleep, I cannot get it to wake up again. It's as if it's shut down and I have to turn it off at the mains and restart it. Any ideas why? Does this keep happening to anybody else?

That message means that you have to restore the iPad now. Something went wrong. You need to restore the iOS software and then restore from the backup.
Read this carefully and follow the instructions. Make sure that you restore from your backup at the end of the process. That is covered at the bottom of the support article.
http://support.apple.com/kb/HT1414

The inbound calls to our call center is drop after putting it on hold or transfer

Dear All;
Good day
The inbound calls to our call center is drop after putting it on hold or transfer the call to another agent. The MOH file is playing till 21 sec only then call drop . the agent cant resume the call again. The MOH file is running from Gateway (multicast).
No problem in outbound calls.
I urgent need you help
Should you require any more information , please do not hesitate to contact me.
Thanks & Best Regards,
Muhammad Fathy,
IT Network Manager
ALEXBANK
A subsidiary of Intesa Sanpaolo Group
Head office: B210-F1, Smart Village , KM 28 Cairo-Alex Desert Road, Egypt.
Cell:      +201017288844.
Office: +202-35311300   Ext: 8090.
eMail:   [email protected]
i To maintain a paperless environment, please don't print this e-mail unless you really need to.

Typically you have a codec or media resource issue to track down. IE, MTP, region, location, gateway trunk to trunk to call or something in that area.   Bypass UCCX and do the same call without this app... does it happen with a normal call?

Acrobat X freezes when I run a JavaScript Action after about 200 files.

Acrobat X freezes when I run a JavaScript Action after about 200 files, batches with less than 200 files work well. I can watch the Acrobat.exe process in the resource monitor and when the Threads reach about 2000 and the Working Memory reaches 500mb, Acrobat freezes. The JavaScript creates 2 redaction areas, applies the redaction, then saves the file to another location. I've tested it on both Windows Server 2008 and Win7 32bit. I'm running Acrobat X Pro fully update to 10.1.10.

It is possible to have the Redaction tool search for a text string across multiple PDFs without using the "Action" wizard or batch processing. You will have to learn the exact steps to properly set the properties for each string of text. You can also review the items marked for redaction and either accept, remove or adjust as needed each one.
There are 3rd party tools that can also redact PDFs and they existed long before this feature was added to Acrobat. Appligent Document Solutions Redax..
Appligent even has a server based product for large amount of files or using watched folders.

Dreamweaver CS3 Blank Page After Putting File To Server

After putting a shtml file to the server it is blank on the server side. I've tested it from another PC with Dreamweaver same version & setup and it works fine so I assume it's not the server. The file is correct on the local site side but server side is blank yet file size is the same. If I did a sync and had it do the dependant files it seemed to work once then wouldn't work again. If I FTP to the server and drop the file all is fine. I deleted the local user profile and created it and it worked once. I uninstalled Dreamweaver and re-installed it and get the same problem. I exported the site then imported it to a different computer and all is fine on that computer. Not sure what to do

<<
Sounds like a strange problem, but take it a step at a time to sort it out. -- Thanks!
First, SSIs only work when the file is viewed with the browser. In the process of getting the file for the user, the server (if it is set up to handle SSIs) will then insert the contents of the included file before it ships the whole thing off to the user's browser. -- Not sure why you're mentioning SSI's
Viewing files on the remote - I assume with FTP and a text editor? - proves nothing. -- I think you're wrong, Viewing a file after the transfer and comparing the local version and the server version does prove there is an issue if they are not exactly the same since they should be
What browser/version are you using? Have you tried other browsers? -- Browser/version is irrelivant since the file on the server side is truely BLANK after you click PUT in dreamweaver and it suposidly "sends" the file
>>
Sorry if I'm not explaining it well.. Let me try again..
Websites all setup and working. index.shtml happens to be setup as the main index file and was working perfectly (had been for a few years)
After a computer was imaged over the summer with a default image, CS3 was installed again. The Site was setup and the user connected to the site, then modified the index.shtml file. After saving the file they clicked PUT and sent it to the server. It seemed to flash quick and not truely send it like it use to. Use to take a second or two not a close to instant flash. After this happens the page is blank. Here's what I did to dig into and see what I could find.
Exported the Site , Imported to another computer that had the same image and had CS3 installed (same as the one having a problem)
Modified the index file and saved then put it. Worked no problems. Ran that test a few times. No problem.
Back to the problem computer. Made a change saved/put the file , blank again. Used Filezilla. Downloaded the recently put file to my desktop and opened it. Completely Blank. (I opened with a txt view and even opened with Dreamweaver) I checked the index file on the problem computer in the local folder it is in. Everything is there and perfect.

My computer screen goes black after putting password

My computer screen goes black after putting password. I already unplugged the cord and battery and held power button for 1 minute several times and still has the black screen

@LisaMG ,
Hello and welcome to the HP support forums. Lets see what we can do to help you with your black screen issue.
When posting here if at all possible please provide your key system .
You have your model and what version of Windows. If possible could you post back with the product number and which version of windows 7. Home, professional, Ultimate. and any service packs that have been installed.
Now here is a link that should help you out in finding what the problem may be and possible ways to solve the issue.
HP Notebook PCs - Troubleshooting Black Screen Displays with No Error Messages During Startup or Boo...
Things you may want to try as well. When you start your computer move the angle of the screen and see if it still has the problem. If the problem goes away you are looking at a cable or connection issue.
If the problem stays the same then you may be looking at a driver or motherboard issue.
Here is a link to a video that may be of some help as well.
How to fix or troubleshoot a blank or black screen not powering up issues laptop
Please post back as soon as you can and let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

ABAP Dump after putting Text in notes tab in MIRO

Hello All,
We have a scenario here,
during MIRO, when user puts some text in the Notes tab and after putting all other relevant data when clicks on Simulate or Save button system gives ABAP dump. This is happening while posting invoices for FD purchase orders and not with other types of POs.
Your help is appreciated.
With regards.
Sanjay

Hi,
Does any body have got a solution to this problem?
BR,
Emrah

After putting in the search for in firefox the next page comes up so small that I can't read the font

font so small on opening page after putting item in search on firefox search page can't read font

waiting for help to solve this problem

After putting my iPad onto airplane mode it won't let me access apps without connecting to iTunes but it won't let me connect to iTunes how can I resolve this?

After putting my iPad onto airplane mode it won't let me access apps without connecting to iTunes but it won't let me connect to iTunes how can I resolve this?

Try "Pacifist"!
Pacifist is an application for Mac OS X that opens up .pkg installer packages, .dmg disk images, .zip, .tar, .tar.gz, .tar.bz2, .pax, and .xar archives, and more, and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package

Getting K7N2 Stable @ 200 FSB? please help.

First, specs:
MSI K7N2 nforce2 mobo
2x256 OCZ PC3200 EL (11-3-3-2.5 at the moment)
Athlon XP-Mobile 2400+
200fsbx 11 multi
vcore= anywhere btw 1.55 and 1.675
vdimm= tried 2.6 and 2.7
Antec True Power 350W (230 combined)
GF4200ti 64 not OCed
AGP bus @ 66 manual
PROBLEM: I get major artifacts/crash in any 3D application at 200fsb 1:1. I just got this new RAM and I'm trying to run it at 200 in sync with cpu.
I've messed with settings quite a bit. Can't get it stable in 3D apps. Any suggestions on what settings to try? What am I missing? Has anyone with this board had it stable at 200 FSB 1:1 sync?
Thanks,
Twanto

Just changed my sig...the Q-Tec is lying in the corner for a week or so now
Hmmm, well if the 72w produces more heat I can't expect such a great overclock as everybody has with the mobiles??

Firefox won't display changes to site after putting to remote host; refresh doesn't work

I recently had to reinstall Windows 7 on my machine, and since it was wiped clean I installed CS5, reconfigured my Dreamweaver site, and made changes to our index.html page (so far). After putting the files to my remote server, I noticed that Firefox does not display the changes I made to that file - it is showing the page last saved on my CS4 version. Figuring this was a cache problem, I emptied it, refreshed/reloaded several times, restarted Firefox - nothing worked.
I checked the page in IE8 and all the changes appear correctly. I used BrowserLab to preview in IE, Firefox (same version 3.6 that I use) and Safari, and all 3 display correctly the updated version of the page. Viewing in "live" Firefox seems to be the problem, and I've searched everywhere for answers. Help is needed and appreciated!

Some things to try:
1) In Firefox > Tools > Clear recent history.
2) Try adding a last modified meta tag to your index page.
<meta http-equiv="Last-Modified" content="07 February, 2011 at 16:43:39" />
3) Use an anonymous proxy
http://proxify.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

No videosignal after putting 200 FSB

Similar Messages

Maybe you are looking for