No virtual host found for iCal service

Hi all,
I recently created a link aggregation for our xserve, in doing this i needed to demote my open directory to standalone and then promote it back to master (archive and install users).
In doing this it appears that iCal has spat the dummy, in that our users could not connect. I turned iCal off and on in the hope that this correct it, however when trying to turn back on I get the error "No virtual host found for iCal service..."
Check host name reveals that names match.
Any ideas guys, I'm happy to fully restart iCal (events are backed up), however I can't even get it started yet!
Thanks,
Nige

Hi
+". . . ours is a standalone server with Open Directory off . . ."+
http://manuals.info.apple.com/enUS/iCal_Service_Admin_v10.5_2ndEd.pdf
Page 13 - Minimum Requirements. As ever how well it all works will come down to how you've configured DNS Services. Get that bit right and everything else will follow.
Tony

Similar Messages

  • ICal Error: "No virtual host found for iCal Service" - Help!

    Trying to set up iCal on OS X Server 10.5.6
    Server is up and running and successfully providing web services on its FQDN. Server is not currently used to support network users / services, but as and when it does it will be the Master Opendirectory server.
    I have created a couple of test accounts on the server (simply in the Users group) and enabled both for Calendar Access.
    I have provided the details of the FQDN on the iCal page, and checked that the default port (8008) has been opened in the firewall.
    In web services there is one virtual domain (using name based virtual server) and the default domain in operation. Both appear to be functioning as would be expected.
    When I click on 'start service' for iCal, I get this error.
    "No virtual host found for iCal service"
    I cannot find any information about this in iCal manual, or online documentation. Can anyone here provide pointer to where this information is, or what it means?
    Would be most grateful.

    Hey there,
    See if any of the solutions provided in either of these older threads can steer you in the right direction.
    http://discussions.apple.com/thread.jspa?threadID=1201737
    http://discussions.apple.com/thread.jspa?threadID=1242823&start=0&tstart=-3
    B-rock

  • "No Virtual Host Found for iCal Service" help?

    I have Leopard Server installed.
    When I try to "Start iCal" in Server Admin, "No Virtual Host Found for iCal Service" pops up.
    Also, I can't configure the server in the Directory Utility. Utility claims the ip address is incorrect, even though I know it is.
    HELP!!!

    I just solved this problem by creating a Kerberos record for the iCal server in my Open Directory server's Kerberos realm. The iCal server can join your Open Directory's Kerberos realm through its Open Directory pane's 'Join Kerberos' button. (I think this could be presented better.)
    If you're not using Kerberos, then you'd probably solve the problem by selecting 'Digest' as the 'Authentication' method.

  • No Virtual Host Found

    Ok soooo
    Like everyone else.. ok like some others here... iCal seems to be a major sticking point with 10.5 Server. I'm not an expert, but have been the server admin for several years now so am kind of learning as I go. Here's what I've done:
    1. Clean install of 10.5 "advanced"
    2. Updated to 10.5.1
    3. Created a few users
    4. Created a few groups
    5. Have AFP, mail, web, SMB, chat , and half of VPN up and running correctly.
    6. When trying to start iCal, I get the error message "No Virtual Host Found"
    Most of these posts deal with Open Directory, so I enabled that service, went thru the setup for it, and now OD seems to be working.
    But I STILL can't get iCal to start running.
    This is a very small office... there is only 1 server, since we are not using it as a NAT, there is no DNS running.
    So what am I missing?

    Well out of sheer frustration, I once again started from scratch. While both the "Standard" and the "Workgroup" setups seem similar, I opted for the "Standard" setup to start.
    I believe the one key element to success is to choose Open Directory as one of the first services to set up... there is a list you check during setup, and Open Directory is one of them.. I checked it, and iCal, and File and Print Sharing, and most likely e-mail as the only services for the server to set up and auto configure for me.
    Once that was done, I added a user or two, and things became much clearer.
    On 10.5 Clients, go to the Utilities folder, and look for an application called Directory Utility, and launch it.
    It's possible that your server may have been found by the client, but if it is, I'd elect to delete it and start afresh just to be sure everything is correct.
    For clients INSIDE the office, when asked for the server name or IP address, I entered the IP address of the server, and it went into auto pilot after that, asking me if I wanted it to configure the client computer.... in my case, I checked Yes.
    It will then configure the client to use the services you've set up on the server(so, in reality, you may want to wait 'til you have more services up and running).
    It asks for your username and password on the server, as well as the password for the client machine. As I understand it, if the client password is different, it will change the password on the server to match(but my password is the same, so can't promise what happens when they are different).
    It DID configure both e-mail and iCal to work correctly with the server. In iCal there is a new listing on the left called yourdomain server, and one default calendar there. You can add more if you like.
    Once you have several users up and running, in the client iCal prefs, under the Accounts tab, there is a tab for "Delegation". This is were you allow other users to see and /or write to your calendar. Click the "Edit" button, and the rest should be cake. The users must be valid users on the server. Likewise, there is a window showing accounts you can access and the privileges you have there.
    In my case, I'm not so much working with others, but am looking for a replacement for the iCal sync function of Dot Mac. I was able to log into my account on the server from a computer at work, one at home, and a laptop. All three reflect changes made on any of the client computers I operate.
    (As a note... for the laptop, which is sometimes IN the office and sometimes OUT of the office, as well as the computer at home, in Directory Utility, I used the FQDN of the server. This connects to the server from outside the LAN and works just the same as if I were inside.)
    Now if only there was an option of what to publish in the server.... with Dot Mac, I elect to publish only that there is an event.. no name or anything else... this allows clients to see when I'm busy, but not who I'm busy with. Unless I can figure out how the calendar can be seen by anyone on the web, AND I can hide the event info, I'm stuck on Dot Mac.
    I WISH I had an answer for the "no virtual host" issue. I did run into a problem with a web site, and found the only way to fix it was to delete the web site entry in the Server Admin, then re-instate it again, and all was well. I'm thinking it MAY be possible to delete the iCal service in Server Admin, save changes, re-start the server, then add the iCal service again.... its possible that will get you around the No Virtual Host message, but since I started over, I can't test to tell you if it will or wont work. I can tell you that there is nothing in the iCal Server Admin that is vitally different that what was there before, so I'm at a loss about the no virtual host message.
    Soooo that's my iCal service story. Long, hard, bitter, and difficult. I've said this before, but Apple really need to create some type of "Re-Initialize" server button to put you back with a fresh install, instead of having to re-install it. I've lost track of how many times I've done that with 10.5, and know I had to do it with 10.2, 10.3 and 10.4 as well. For now, I'm on the Standard Setup, but intend to migrate to the Advanced after this seems stable AND I've got a good working copy on a separate drive to go back to should things go haywire. I can say that while I've have had to use Server Admin some(for the firewall for sure), there seems to be no interference between the settings I make in Server Prefs and Server Admin.
    Good luck to you all!

  • Error message: Host process for windows services stopped

    I recently had to install a new hard drive into my laptop. I am running windows vista and have installed all updated drivers. After installing itunes and uploading my backed up library, I went to play a song and I got the error "host process for windows services stopped working and was closed." Movies play fine. I have searched but have not found anything. Any help would be greatly appreciated. 

    Q I just upgraded to a new mobo and CPU, the EVGA X58 SLi and i7 920, and this issue still persists! That means it is either the sound card or Steam. The drivers on the CD have no issues, only the newer ones do. So by deduction there is something wrong with the new drivers, but I need them to not BSOD in OpenAL!

  • A135-S4527 Host Process for Windows Services stopped...

    I have started getting a Windows error: Host Process for Windows Services stopped working and was closed.  Laptop runs fine except my network connection says Connection Status: Unknown The service to detect this status is turned off and McAfee stopped working.  Can't run any of the MS tools either.  I am suspicous of conficker e but don't know how to detect or remove it.  Have seen the b variant on an XP machine at work, but the tools we used on it don't work on Vista.
    I am running Vista Home Edition (came on Laptop) upgraded to SP1 with auto-updates on.  McAfee was also set for auto-updates and nightly full scans, active e-mail and internet scanning.  No recent software downloads except for updates.
    Have been having the issue since about April 28.  Tried to restore but no dates exist past May 5.  Tried the F8 Startup recovery no problems found.  Have tried restarting services but they quickly stop again.  Uninstalled McAfee and tried AVG. It allowed defintion updates and I scanned all files.  No viruses, trojans or malware detected.
    Any suggestions?  I have a tasklstserv file I can copy and paste if it will help.

    That's a bad-sector event. At a command prompt (cmd.exe), run chkdsk /r.
       Event ID 7 Source Disk
    But it doesn't seem likely that's the cause of the message. When you get another one, note the time and check the Application and System logs for entries at that exact time.
    Thanks for the detailed information.
    What virus protection do you use?
    -Jerry

  • Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close - J6480

    Computer: eMachines T3025 Athlon
    OS: Win XP SP3 (recent clean install)
    Printer: HP J6480 on wireless network
    Printer prints and scans fine wirelessly.   I am using the "small footprint" HP drivers to print and scan.
    After some hours with printer connected to the computer wirelessly and printing or scanning, I eventually get the 
    'Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close'  error message and cannot print or scan any longer unless I shutdown and restart Windows.
    I have implemented all the fixes (download, reinstall, etc.) listed for this printer on the hp.com site - namely
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00273968&tmp_task=solveCategory&lc=en&dlc=en&cc...
    with the exception of changing the firewall setttings to allow hpqtra08.exe to run.  This file is not found on my system in my install.  The files that are allowed to bypass the firewall are shown below (duplicates listed as shown on my screen)
    hpoews01.exe
    hponicifs01.exe
    hponicifs01.exe
    hponicifs01.exe
    hposid01.exe
    hpqkygrp.exe
    hpqtax08
    hpznui08.exe
    hpznui08.exe
    hpznui08.exe
    Per the Firewall bypass instructions, the files available in the Digital Imaging\bin location on my machine are
    hpiscnapp
    hpoews01
    hposid01
    hposvc08
    HpqApKil
    hpqkygrp
    hpqpprop
    hpqqpawp
    hpqtax08
    hpqtbx01
    HPqTrMgr
    hpqwrg
    hpsjrreg
    What else do I need to do to solve this problem once and for all ?

    Hi,
    Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
    update your AV soft then scan the virus.
    The relate hot fix:
    The Service Host process may stop unexpectedly in Windows Server 2003
    http://support.microsoft.com/kb/932762/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • In service order Issu:No account assignment found for this service process

    Issue:No account assignment found for this service process
    An error has occurred in the system RT1400LS while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
    Transmission log
    No account assignment found for this service process (Notification E CRM_SRV_LOG_EXT_OLTP 008)
    While we created the service order as a fallow up document of the quotation system unable to create the PR. System showing the above error in the service order.
    We created the service order with same items directly not as fallow up document to quotation PR created with out any fail.
    As per my analyses above error because system unable to find out the Internal order to create the PR hence we created service order as a fallow up document of the service quotation.
    Revert require data to understand the issue more.
    Best Regards,
    Prakesh

     Dear Gurus,
    Thanks for your update. we checked as per your suggestion but the issue is PR is not determining the IO while creating the PR.
    We used the different item cat in quotation and service order system generating the PR, But our Clint want to use the same item cat in the both service order and quotation.
    If we created the quotation after that service order with the service line item and spare part line item system creating the IO (internal order) but PR not generating.
    Please help me in this scenario what should we do.
    Best Regards,
    Prakesh.

  • I keep getting a popup that says"host process for window services has stopped"

    hp s5220f
    microsoft windows 7 home premium edeition (64 bit)
    I keep getting a popup window that says "host process for window services has stopped"
    How can I get rid of this?

    Hello tribefanz,
    Sounds like a compatiblity issue with a program and Windows 7. We need to find out what program is causing the issue though. We can do that through event viewer
    1. Click the start orb
    2. Select Control Panel
    3. System and Security
    4. Under Administrative Tools select the Event Viewer
    In the event viewer you will want to drill down into the Application and System logs and look for anything with a Red X that says Error. Identify the program causing the problem and then we can go from there.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Virtual Host Name for CM

    Hi ,
    R12.1.3 & 11gR2 DB
    I have a qucik question . When We have Virtual Host Name for setting , What Should be the node name for ICM in Concurrent Manager Admin form.
    In One of our Instance : For ICM & Other Manager , its Virtual Host Name
    For Other : ICM : Physical Host Name & Other Manager Virtual Host Name .
    Which is good. We having a issue with ICM on both Nodes , in every minutes is going down and come up automatically.
    Regards
    Sourabh Gupta

    Hi Hussein,
    Thanks a lot. I have already review these document.
    Is Auto Failover With Virtual Hostnames For Concurrent Processing Servers Supported In 11i Or R12? (Doc ID 456540.1)
    Adding an Alias Hostname with Oracle E-Business Suite Release 12 (Doc ID 603883.1)
    Concurrent Processing - CONC-SM TNS FAIL In Internal Concurrent Manager (ICM) Log File With Virtual Hosts Configuration [ID 961216.1]
    ICM Not Starting: Node Name not Registered [ID 602942.1]
    I am curious what should be the node name in concurrent manager Administrator form.
    W ether is should be the virtual host name or physical host name.
    I have just checked with few people , Some Says ICM node name should be Physical server name & Other CM name can be Virtual name. I am not sure on what basis people are saying.
    Few says node name should be the physical host for every CM.
    Note Sure what is correct & best configuration.
    Regards
    Sourabh GUpta

  • Oracle Portal Virtual Host Enhacement for Multiple Virtual Hosts

    I open the TAR Number: 4326752.996
    The TAR is related to " REQUEST ASSISTANCE FOR MULTIPLE VIRTUAL HOSTS AND MULTIPLE PAGE GROUPS CONFIG. "
    This is the Scenario: We Have Oracle Portal installed in a single Box. yes I know I know... but Not everybody is Yahoo or Google for Clusters and all the good stuff, we just want our website managed by Oracle Portal since all our ERP is running Oracle Database. Anyway. 1 Box running Oracle Portal Infrastructure and MidTier.
    It turns out that our previous configuration we have the LAMP Solution with PHP, Apache with Virtual Servers configuration very trivial for a regular web server however we have about 6 Virtual domains.
    For example:
    www.abc.com
    www.def.com
    www.ghi.com
    www.jkl.com
    www.mno.com
    www.pqr.com
    We also like to post all our Intranet Information in this great Portal:
    http://intranet.com
    Where intranet.com is the same server but setup in our Internal DNS without be a Real Internet Register Domain.
    So bottom line we start doing great with Install our single box install, later [GRRRRRR does not come by default in port 80 GRRRRRR, ok need to move and setup the virtual host to resolve our main External website www.abc.com ]
    For starters ok it worked we have our main website running Oracle Portal.
    Now is time to go to the step number 2.
    Setup another Page Group in Portal to be the Page_Group_INTERNAL.
    I figure if Apache can setup Virtual Hosts pointing to Independent parts of the File System without be shared. I was expecting some kind of custom configuration where I can setup httpd.conf to point to some specific PageGroups to make sure
    www.abc.com => Page_Group_External
    never share information with:
    intranet.com => Page_Gorup_Internal
    My TAR was very quick closed with the Argument that is not what It supposed to do.
    Since a virtual host is a common thing to do on Linux and Apache, I wonder if You guys could list this as one of the default features to have multiple virtual domains assosiated with Page Groups that they never talk or share Resources I think that would be really great.
    In the mean time I guess we have no option but to put a password for every internal page or take the risk of share our Information to the Internet. Perhaps designate another box with Oracle Portal but In that case Is not really cost/bennefit to use a killer technology for our external site since we just have no more than 30 pages.
    Anyway just figure drop you guys a note any advise will be really appreciated.
    Best Regards Dino.

    Hi Martin,
    1. To change the target URL of KM resources you can to the following:
    Access the URL Generation Service Configuration by navigating to:
    System Administration -> System Configuration -> Knowledge Management -> Configuration
    Content Management -> Global Services -> URL Generator Service
    Change the Host property to "portal.company.com".
    2. You change the Port by opening the Visual Administrator and going to : Dispatcher -> Services -> HTTP Provider
    Change there the "Ports" entry from (Port:50000,Type:http)to (Port:80,Type:http). Then go on "Save".
    3. To remove the "/irj" from the portal URL you can create a index.jsp with the following content, and save it in the J2EE Documentation folder:
    <Drive>:\usr\sap\<SAPSID>\JC<J2EE_instance_number>\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root
    <%
    //Send the redirect using server redirection (not client script)
    //This will also send the HTTP GET parameters
    String queryString = request.getQueryString() ;
    if (queryString==null ) {
    response.sendRedirect
    ("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default") ;
    } else {//redirect with HTTP GET parameters
    response.sendRedirect
    ("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?" + queryString) ;
    %>
    Hope this helps,
    Robert

  • Virtual host name for Portal (EP6 SP9)

    Hi,
    I just tried to set virtual host for the portal URL of a EP6 SP9. I set an DNS-Alias portal.company.com for the IP-adress leading to hostname.company.com. So, http://portal.company.com:50000/irj already leads to the portal start page.
    I cannot find any differences after setting the virtual host alias 'portal' in the J2EE Administrator. I read the documentation in help.sap.com ... don#t know how to proceed. When looking at the access path in the details menu of a KM file, I still get the hostname.company.com-URL ....
    In addition, can I switch the J2EE Engine make listen to port 80 and lead the alias directly to /irj, so that http://portal.company.com directly leads to the portal logon page??
    Thanks for any help
    Martin

    Hi Martin,
    1. To change the target URL of KM resources you can to the following:
    Access the URL Generation Service Configuration by navigating to:
    System Administration -> System Configuration -> Knowledge Management -> Configuration
    Content Management -> Global Services -> URL Generator Service
    Change the Host property to "portal.company.com".
    2. You change the Port by opening the Visual Administrator and going to : Dispatcher -> Services -> HTTP Provider
    Change there the "Ports" entry from (Port:50000,Type:http)to (Port:80,Type:http). Then go on "Save".
    3. To remove the "/irj" from the portal URL you can create a index.jsp with the following content, and save it in the J2EE Documentation folder:
    <Drive>:\usr\sap\<SAPSID>\JC<J2EE_instance_number>\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root
    <%
    //Send the redirect using server redirection (not client script)
    //This will also send the HTTP GET parameters
    String queryString = request.getQueryString() ;
    if (queryString==null ) {
    response.sendRedirect
    ("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default") ;
    } else {//redirect with HTTP GET parameters
    response.sendRedirect
    ("irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?" + queryString) ;
    %>
    Hope this helps,
    Robert

  • Error when login windows 2003 server: Generic host process for win32 services has encountered a problem and needed to close

    Hello, Yesterday I've upgraded from Windows Server 2003 R2 Standard x86 to Enterprise. After upgrade I had to download and reinstall all updates about 130. The error from the topic title appears at logon. Another thing is Automatic Updates won't start
    and because of this other services that are set to Automatic just stop. Here is the list of services: Application Management, BITS, COM+ Event System, Cryptografic Services, Distribuited Link Tracking Client, Help and Support, Logical DIsk Manager, Performance
    Logs and Alerts, Server, Shell Hardware Detection, Workstation .... Error print screen: http://i.imgur.com/QPpMV6w.jpg appcompact.txt can be viewd here: http://textuploader.com/1bow Need to solve this issue asap, thank you in advance.

    Hi,
    Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
    update your AV soft then scan the virus.
    The relate hot fix:
    The Service Host process may stop unexpectedly in Windows Server 2003
    http://support.microsoft.com/kb/932762/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Class not found for web service

    hi,
    I'm tring to develop a simple web service using axis 1.3 and Tomcat 5.0 as container and server but I've got some problem catching some class. I've downloaded all the jar files (all the org.apache.axis.* and all in the WSDP2.0) but when I open jar files I get only the *.class and not the *.java.... I use the NetBeans IDE 5.0 to develop all the class but it say that it can find all these class.
    (I've put all the needed jar file in the library of the package)
    actually I need the AdminClient.java, Service.java all the jaxrpc.
    I think it could be really a simple problem.... but I don't know how I can go on....
    thanks

    I've just done the download of wsdp 2.0 or the previous version but in all jar file I can find only files with extension *.class. I need the *.java ?Isn't it?
    It's possible that the problem is using netbeans 5.0?
    I don't think so because also from the dos command line I can't found the property class....( java2wsdl.java )

  • Host process for windows services has stopped working in windows server 2008

    hi ..
    i can access to server from any where by remote desktop
    the problem is if you want access the error in client is can not connect to user profile and in server the error is (failed to connect to windows service
    windows could not connect to user profile service service .. )

    This one may help.
    You receive a "The User Profile Service failed the logon” error message
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Maybe you are looking for