No Vista boot after old hard disk added, black screen only

My Vista machine had been running just fine for two years now till I decided to add an old hard drive (Quantum Fireball 30 Gb) from another computer. It was installed and when I restarted the system the bios seemed to run fine (the drive was even recognized in the hardware section). However, upon exiting the bios the screen now goes and stays black, except for a thin white line that flashes slightly diagonally across the top of the screen. Even after removing the drive the same problem remains. I have already attempted to try just about every possible change to my bios settings including the restoring optimized and fail safe settings. About the only thing I have not tried is changing speeds or voltage settings. Would this possibly be reason enough to try flashing the bios?

This post did not belong where you put. I moved it here and you can work at figuring out the actual problem. Don't even think of flashing the BIOS yet.
>> Posting Guide <<

Similar Messages

HT201210 I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more

I updated my ipad 1 to 5.1.1 and after that, my ipad shows black screen only, no more screens, what can i do to fix it,a already tried to recover several times, on three different computers nothing happens

1. Turn off iPad
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times.

Restore profile from vista backup after reloading hard disk

saved vista backup of hard disk to usb drive. restored hard disk from acronis backup. want to restore firefox profile from vista backup on usb drive to loaded hard disk

This post did not belong where you put. I moved it here and you can work at figuring out the actual problem. Don't even think of flashing the BIOS yet.
>> Posting Guide <<

Pavilion g6t wont boot after bios update now just black screen please help!

I downloaded an update for the bios for my pavilion g6t-1d00 laptop running windows 7 64 bit. It started acting kind of funny but I didnt think anything of it til I tried to boot it up the next day and all I got was a black screen and a orange led light on the f12 button for the internet and the caps lock button after blinking afew times started the dredded two times every couple of seconds. I tried the windows key+B key power key, no luck. I cant access anything because I have no monitor and I'm at my wits end. I refuse to wipe my hard drive and start over even if I could! I cant access hp tools or manager or anything, please someone has to have a solution!

@Fuschia4me,
1.       You will have to use another computer
2.       Access the HP.com site with the BIOS updates available here is the link
3.       You want to select the F.36 BIOS version
4.       When you click on the update then click download and it will ask you to save or run, you want to save to a flash drive
5.       Once done insert the flash drive into your laptop
6.       Turn the computer on and press the windows and B key like before
If the process doesn’t work the first time I would try at least 2 more times.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Kernel panic after new hard disk

Because my macbook is very old (early 206 model) and has not many free space left I decided to put some more RAM in it and a new hard disk. First I installed the RAM and that worked fine, so I did a full copy of my old hard disk to my new one, using disk utility. However, after putting my new disk into my macbook I fired it up but it gave me a message that I should restart my computer. On the background I saw that it was about a kernel panic. I don't know what to do because I can't reinstall OS X because my SuperDrive doesn't work.
Does anyone knows the answer?
-Sander

First, are you saying you cannot boot the computer from your external clone? If so, then your clone is unusable so you will need to use the OS X installer DVD to install OS X on the new drive.
If you cloned your old system to the new drive and cannot boot, then you may not have prepped the new drive properly as follows. This assumes you have booted from the external clone:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Once formatting has complete you can restore your clone:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive.
Source means the external clone drive.

Should I boot from external hard disk and how do I achieve this?

I'm in a downward spiral and need advice about if booting off of an external hard disc is the right thing to do and how to go about it. How I got into this mess I'll write below. My immediate problem is that I want to be able to install a copy of osx 10.5 from the original disks that came with my computer onto a usb hard drive. Then I want to boot from that drive and install software such as disk warrior on the same external hard drive in order to repair and recover the files on my internal hard disk. Not sure if this is easy to do with the install disk that came boxed with my macbook. So is what I want to do feasible and how do I do it? Thanks.
How did I get into this mess?
For those with time to read more. A downward spiral (and my macbook was working fine)::
I have been backing up my work documents onto a 20 GB pendrive waiting to get the money to buy an nas to work with time machine for the two macbooks we have at home as a place to backup photos and video. I bought a network drive but it wouldn't work with my macbook; my time machine backup freezing at 3 gb, but works fine with wife's macbook pro.
I tried to do TM backup on a usb hard disk and got the same problem. Support forums indicated that hard disk problems could confuse TM, so although I was experiencing problem free computing I ran disk utility from internal osx. This indicated an <invalid node structure - file system verify or repair failed> at the checking catalog file stage. So I followed instructions to run disk utility and repair from the installation disk. When I ran disk utility from installation disk I get exactly the same <invalid node structure - file system verify or repair failed>. It gets worse.
After failing with install disk utility, I could not then boot from my hard disk (I had had trouble free computing up to my attempts to use TM) or eject the disk. At first attempt I had no option but to boot from dvd again as hd not offered as an option. Second attempt hd option available but fails. By reading advice given to others I managed to eject the dvd and have tried:
safe boot - it won't
boot in verbose mode and single user (indicates I have disk0s2:I/O error) and won't boot
try to use disk utility from install disk to create disk image on external hd, it won't (cites i/o error)
If I can boot from an external I will try to repair with Disk Warrior as forums indicate that this software has been able to solve <invalid node structure> issues (but am open to recommendations of other products). I also hope that I may be able to try again to burn a disk image sucessfully if this repair works. I'm still trying to save my photos and videos that aren't backed up.
I plan to try an archive and install installation but first I want to try a repair with disk warrior as I fear that archive and install won't work and I'll end up having to erase and repair my hard disk.
I feel like some perverse god is punishing me for trying to do the right thing and back up my hard disk.
Macbook 5.1 late 2008
Intel Core 2 Duo
OSX Leopard 10.5.8
85 GB of a 150GB hard disk needs backing up (saving)

I am not sure about this, but my memory is that if you try to partition the drive (in OS 10.5.8) it will erase the data.
But you can try. Go through the Add a partition steps, but watch for any warnings. If my memory is correct there will be a message to the effect that everything will be erased. If you see that, do not proceed. This page has info about how to do it, if it can be done: http://www.macworld.com/article/1164643/live_partition.html
With respect to DW on an external, I do that. I have a 80 GB external - I call it Emergency - with an OS, DW and TechTool Pro on it. (Since I have is a recovery partition built in with all new OS, Emergency would be of use only if I need to run DW or TTP.) I have never yet had to use it, but it's there. It is not usually connected - I just did that for this screen shot.

Windows xp won't boot after cloning hard drive to a bigger drive

I have a HP Pavilion Dv4170us laptop added some new upgrades to it.. max RAM 2GB... a new battery... and I bought a 160GB samsung IDE drive to replace the origional 100GB drive...Using EZ Gig II software and usb drive adapter I successfuly cloned the smaller hard drive but when I swaped them out it won't boot windows xp.. just a black screen with the blinking curser at the top left corner... using my windows xp pro disc.. i ran the system recovery and tried first fix mbr command... then I tried fixboot.. I also looked for the boot.ini file which is not in the C: root drive...I only found a back up copy of it in the windows/pss folder... this is on both drives.. so the cloeing copied it all... but the origional drive will boot and the new one won't... I even tried reinstalling XP as a repair installation...still nothing... any ideas??

wsev1955 wrote:
I have a HP Pavilion Dv4170us laptop added some new upgrades to it.. max RAM 2GB... a new battery... and I bought a 160GB samsung IDE drive to replace the origional 100GB drive...Using EZ Gig II software and usb drive adapter I successfuly cloned the smaller hard drive but when I swaped them out it won't boot windows xp.. just a black screen with the blinking curser at the top left corner... using my windows xp pro disc.. i ran the system recovery and tried first fix mbr command... then I tried fixboot.. I also looked for the boot.ini file which is not in the C: root drive...I only found a back up copy of it in the windows/pss folder... this is on both drives.. so the cloeing copied it all... but the origional drive will boot and the new one won't... I even tried reinstalling XP as a repair installation...still nothing... any ideas??
Hi,
Can you see the new hdd in the BIOS?
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far, just before cloning may start and receive an "error 254" and can go no further. Any idea what this error is?

I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
Vince

Connect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao.

Is there any way that I can get back my iPhoto? After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

Is there any way that I can get back my iPhoto? After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

As Niel pointed out, yes. The disk probably will look like the MBP disk (4) in this screenshot;
OT

How do I recover tunes from my iPod after a hard disk crash?

I've just received my PowerMac back after a hard disk crash and am having to reinstall all software etc.
My iPod obviously contains all the music I'd downloaded from the iTunes music store and all the CD's I'd loaded manually into iTunes.
I can't see any way of copying the tunes on my iPod back into my iTunes library...
Can anyone help?
I had to use a data recovery tool to recover data from my disk after the crash and it's going to be a really long job to sort out what's what...
JJ

You can't sync or drag your music back from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the files from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. I use Senuti but check the others out and choose whichever you prefer.
Senuti Mac Only
iPodRip Mac Only
PodWorks Mac Only
iPod.iTunes Mac Only
iPod Access Mac and Windows Versions
YamiPod Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions

How to boot Linux USB Hard Disk from Windows Machine?

*Dears,,*
I have XP windows Machine . . .
My laptop is Qosmio F20 155
I need to boot Linux USB Hard Disk .
I tried to enter setup menu to arrange the boot perority to make The USB Hard Disk FIRST but i cannot enter setup menu
Please, help me ASAP
*Many Thanks & Regards,,*
Message was edited by: eng_mohammedmostafa

*Dear,,*
FYI , , ,
We have another laptop (VAIO) and we can enter BIOS and edit the priority boot and it run successfully . . .
But in laptop (Toshiba) We can't make it.
*Thanks & Regards,,*
*Eng Mohammed Mostafa*

Serial issue when install adobe again when old hard disk damage.

Hi, I have installed adobe creative suite 5.5 design premium in my computer. But recently, my hard disk damaged and I switch to new computer. However, when I reinstall the adobe, the serial Number doesn't work anymore. Can anyone suggest how to activate the software as my old hard disk cannot use anymore.

For serial number issues, you'll need to contact Adobe Customer Support in your region. We can't answer serial number issues here, unfortunately.

On my old hard disk I had registered the download converter so do I need to register, and pay, again now that I've got Firefox v5 running on my new disk?

Basically I was using a registered copy of the download converter through Firefox v4.1 and then I needed to upgrade my PC and that included a new disk. Whilst reinstalling software I'm now on Firefox v5 and I assume that my new disk does not contain the download converter registration details. Is there anyway I can pull through my registration from my old hard disk and if so which file do I need to look at?
If necessary I will re-register but I'd rather explore the free option first.
TIA,
Nigel.

Try the forum.
*http://forum.downloadhelper.net/forum/4

What will happen to my key if my hard disk is formatted, will the key work after my hard disk is formatted ?

I want to know that, will my synchronized computer key will work if I format my hard disk because when hard disk is formatted then the key code will be erased , though I have saved my key will it work after formatting hard disk . let me know .
let me also know that what will happen if I lose the key I had saved then how will I access my synchronized computer .

Hi!
Can you point to the information where it says that the information is backed up in our servers? If that's mentioned anywhere we need to clarify it.
The only reference I found is here: [[What is Firefox Sync?]] and it specifically says that the information is synched across devices through our servers. If that's misleading, let me know so we can rephrase it.
Regarding storing the key in your pen-drive or any other back up system: This is the best solution and it will work smoothly after you format your computer. The key doesn't change when you format your computer so you will have no issues after all.

I cant able to copy my files from my macbook to external hard disk,its showing "read-only",but i can able to transfer files in windows os,why cant i able to do tht in here?

i cant able to copy my files from my macbook to external hard disk,its showing "read-only",but i can able to transfer files in windows os,why cant i able to do tht in here?

to frederic1943
Its in NTFS Format...and i hav downloaded the file NTFS-3G,but still i dont know wht to do with that.will u pls help me here.

No Vista boot after old hard disk added, black screen only

Similar Messages

Maybe you are looking for