No Visual Composer server was found at specified address

After installing VC server and a restart of the Portal system, I can not connect to the VC server.
I was able to connect before the restart, create a model, deploy and test it.
I looked at Vis admin and the components are running. I also tried to stop the client, server components but I get the same error.
Any suggestions?
Thanks

Hi ,
Check the belwo thread.
its olves ur problem.
Fatal error: No Visual Composer Server was found at specified address....
Regards,
Govindu

Similar Messages

No weblogic server was found running on the specific port.

Hello,
While trying to target/connect to the weblogic server from Grid control 10.2.0.5,I'm getting the below error.
1.Added the connection filter in the weblogic console to allow connections only from the grid control's host
2.But while trying to connect from the grid control to the weblogic server for monitoring,its failed with the below exception,
"No weblogic server was found running on the specific port.if the administration port is SSL enabled,specify the keystore and try again"
3.However,I can able to connect to the weblogic if I dont give any connection filter arguments.
"No weblogic server was found running on the specific port.if the administration port is SSL enabled,specify the keystore and try again"
Appreciate for any pointers/help to resolve the issue.

Hi,
Next thing to do is to make sure that the parent paths issue is out of the way:
Create a new asp file at the location: d:\inetpub\wwwroot\SAP NetWeaver Visual Composer\server\bin\test.asp
with the following content:
<%@ Language="JScript" %>

<%
Response.write("Success");
%>
If you do not see the "Success" string printed out when you call your asp in the following way:
http://server:port/VCServer/server/bin/test.asp
then you still don't have this parent paths configured correctly.
If you do then you should open an OSS message and let dev support have a look at your installation.
Regards,
Yaniv.

Visual Composer services not found

Hi,
We had configured VC on our dev server. Every alternate day while accessing VC it gives error..
a. VC services not found
b. This product required MSXML Parser 4.0
We had already installed MSXML Parser.
But when we restart the 2 VC services [vcclient & VisualServerEar04Composer] Visual Composer is again accessible....
Can anyone please suggest which will prevent to restart the services again & again..?
Regards,
MS

Hi Mario,
mh...strange.
I used the VC on our old server with my notebook without a problem (great tool!).
Now we have a new server with a new NW 04s SP10 (very fresh installed ) and there I get the "Server Error: Visual Composer services are not found" and "This product requires MSXML Parser v4.0" errors.
Unfortunately I cannot test it on the old server, because it was a interim system.
Regards,
Christian

Error while looginto VC (Visual Composer)

Dear Expert ,
When I am login I am getting this error "NO visual Composer Server was found at pecified address ( Error reading server parameters in url:/VC/servlet/Generic Channel?Service = getserverdata)
I have assigned visual composer role .Please Guide me

Hi siddhartha,
go through the below link given by SAP, it wil be more helpfull
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/92d80512-0a01-0010-32a3-cd3735bd9275?quicklink=index&overridelayout=true
Regards,
Marasa.

Visual Composer + WAS 6.40 Stack 14

Hello everybody,
i have heared that with stack 14 of SAP NW 2004 a Visual Composer Server doesnt need a standalone IIS-Webserver anymore and will be integrated within the WAS. Anyone has more infos on that?
regards,
Markus

https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/65984d16-0401-0010-419a-cd190812a128
In that page u found a PDF that name the VC6.0 and the new one that will not have to use ISS, support FLEX, etc this VC they called VC Netweaver 2004 and according with the PDF can be used with EP60, I dont know if this version VC04 never came out and SAP decided directly get out the VC04s version. From what I know one of our client buy the license of NetWeaver 2004 and for what I can see the VC that cames with this version is the VC6.0, pls correct me if I wrong.
What I really care is knowing the fact that VC04s (the version that will get out very soon) can we used or not in a portal EP6 and in the case that can run find out if there is some limitations.
thx

Error while opening the Visual composer

I have downloaded and installed the following version from sdn.
SAPNWCE71TrialSP1Preview_CompEnvServer .
When i am trying to open the VC in browser. it is giving the following error while opening.
Failed to open the workspace due to the following error : Kits manifest is bad or missing.
More information : Failed to invoke the function."actionKitsManifest" of the remote service:'LibManager'.
If you to see the screen shot the error i have uploaded in to the wiki in the following path:
Visual Composer > Main > Attachments > visualComposerError .gif
Kindly tell me what is the work around need to be done for this.
Regards
Vijay

Hi I've copied the following section from the VC 6 installation manual.
It worked from me, maybe it works for you:
4 Preparing the Visual Composer Client
Machine
Visual Composer Storyboard, operating on the Visual Composer server, is the design
environment in which you create your portal content. It functions as a thin-client application
that can be accessed from the Internet Explorer web browser of any machine with network
access to the Visual Composer server. See the Visual Composer User Guide for instructions
about logging on to Visual Composer Storyboard from a client machine.
In order to log on to and work with Visual Composer Storyboard, be sure that your Visual
Composer client machine meets the following software requirements:
Microsoft Internet Explorer 6.0 SP1or higher
Microsoft XML Parser 4.0
Adobe SVG Viewer 3.0
Download MS XML parser 4:
http://download.microsoft.com/download/9/6/5/9657c01e-107f-409c-baac-7d249561629c/msxml.msi
Download SVG from
http://www.adobe.com/svg/viewer/install/mainframed.html
Best regards, Marcel.

Problem in Visual Composer Installation

Hi,
I am trying to install the VC Server on my system. I have installed the required components like
1.     MS SQL Server 2000 DE
2.     IIS
3.     MS Internet Explorer 6.0 SP1 or higher
4.     Microsoft XML Parser 4.0
5.     Adobe SVG Viewer 3.0
Now, when i try to install the VC, in one of the wizard screen, it is asking me to enter the server details and login details.. I gave "sa" userid and pwd.. in that screen, but.....
i am getting an error "SQL Server does not exist or access denied" . But, the SQL Server is already running...
Please help me out to get rid of this message and install it properly.
Thanks and Regards,
Manjunatha.T.S

Hello Tommy,
Don't Forget to set the authentication to windows & SQL !
(page 11 of installation guide)
3.4 Installing Visual Composer Storyboard
To install Visual Composer Storyboard, you must first check that the SQL server is configured
according to Visual Composer requirements. Following the prerequisite software installation,
you install Visual Composer Storyboard on the Visual Composer server machine.
Procedures
To configure the SQL server:
1. From the Windows Start menu, choose Programs ¨ Microsoft SQL Server ¨
Enterprise Manager.
2. Under the Console Root ¨ Microsoft SQL Servers list, locate your machine, right-click
on it and select Properties.
3. In the SQL Server Properties dialog box, click the Security tab. Then select SQL Server
and Windows as the Authentication option and System Account as the Startup service
account option and click OK.
To activate IIS security features:
1. From the Windows Start menu, choose Settings ¨ Control Panel ¨ Administrative
Tools ¨ Internet Services Manager.
2. From the Internet Information Services tree, expand your machine node and expand
the Default Web Site tree.
3. Right-click the VCServer folder and from the context menu, choose Properties.
4. In the VCServer Properties dialog box, open the Directory Security tab.
It runs well as soon I put the local account to run the services (as said in the installation guide too).
Hope it helps !
Kind Regards
Rui Filipe

WebDynpro runtime mode in Visual Composer

We are unable to create and deploy Visual Composer projects with WebDynpro runtime mode due to we unable to see any datasource of systems in "Find Data Service" area.
In the same time when we use Flex runtime mode BAPIs in "Find Data Service" apears.

Sorry, I mean WebDynpro runtime in Visual Composer
I've found the solution.
WebDynpro only supports Webservices as datasource.
See also note 950492
RFCs
However, if you uncheck mask unsupported features under Tools -> Options, and then deploy, BAPIs will also work to a certain extent.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/flashvs.WebDynpro

WebDynpro ABAP application in Visual Composer 7.0 SP 14?

Hi Experts,
i have few webdynpro applications that i want to reuse in Visual composer. i was trying to use the SICF service thats created as result of creating application, as webservice however this does not work.
Any suggestions.
Greetings
Prashant

Hi,
Check the "Compose" menu, you have plenty of components, operators, ... one being the HTML control component.
Also, have a look at the documentation here :
Visual Composer Storyboard
http://help.sap.com/saphelp_nw70/helpdata/EN/95/b1816efb06463783921f98f769b473/frameset.htm
Task panel
http://help.sap.com/saphelp_nw70/helpdata/EN/47/6efa0e495d199be10000000a42189d/frameset.htm
Best regards,
Guillaume

Attachments in Visual Composer

Hello All,
We are planing to develop an UI in Visual Composer where in the User can attach the word documents by clicking the browse option.
We are trying but could not able to find that option in VC 7.2 ; sp3.
Could any one help us on this.
Thanks in Advance.
Regards
Sumana

Hi I've copied the following section from the VC 6 installation manual.
It worked from me, maybe it works for you:
4 Preparing the Visual Composer Client
Machine
Visual Composer Storyboard, operating on the Visual Composer server, is the design
environment in which you create your portal content. It functions as a thin-client application
that can be accessed from the Internet Explorer web browser of any machine with network
access to the Visual Composer server. See the Visual Composer User Guide for instructions
about logging on to Visual Composer Storyboard from a client machine.
In order to log on to and work with Visual Composer Storyboard, be sure that your Visual
Composer client machine meets the following software requirements:
Microsoft Internet Explorer 6.0 SP1or higher
Microsoft XML Parser 4.0
Adobe SVG Viewer 3.0
Download MS XML parser 4:
http://download.microsoft.com/download/9/6/5/9657c01e-107f-409c-baac-7d249561629c/msxml.msi
Download SVG from
http://www.adobe.com/svg/viewer/install/mainframed.html
Best regards, Marcel.

Problem installing Visual Composer

Hi experts,
I downloaded Visual Composer from SAP Servise but I have not been able to install it on my laptop due to the following issues:
It is looking for a SQL client, and an IIS server.
Can you tell me what I might be doing incorrectly?
Thanks in advance for your help.
Jennifer

Hi Jennifer ,
Your Visual Composer installation is comprised of the following components:
<b>Visual Composer Server</b>
made up of the following: Web Server (IIS), Storage Layer (Microsoft SQL Server), Visual Composer Storyboard (the Visual Composer interface
that you use for portal content development)
<b>Visual Composer Addons to SAP Enterprise Portal</b> (connects Visual Composer to portal)
Visual Composer is internally using IIS Server as Webserver.So IIS Server is mandatory...
Meta Data informations regarding our applications which are developed using Visual Composer are stored in the DataBase. Thats why its is asking for SQL Clien.
   Installation guide is here....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/45bfd990-0201-0010-e1b3-a38f22a5b5b2
User Guide is available here
http://help.sap.com/download/netweaver/nw04/visualcomposer/VC_60_UserGuide_v1_1.pdf
                 Regards
                 Kishor Gopinathan

How to install and configure visual composer

hai experts,
any one help me to install and configure the visual composer. and also tell me the procedure for installation and configuration.plz help me.
regards,
puagzh.

Hi raj,
Installing Visual Composer.
Enterprise Portal 6.0
EP 6.0 SP2 (on Web AS 6.20): patch4 or higher
EP 6.0 on Web AS 6.40: SP Stack 05
Add-ons (integrated in EP 6.0 SP2 Patch 5 and higher and in EP 6.0 on Web AS 6.40 SP Stack 05 and higher)
2 Portal Add-ons for design time portal
2 Portal Add-ons for BI Kit (only in EP 6.0 on Web AS 6.40 SP Stack 05)
Runtime Add-on for run time portal
For VC BI Kit: Deploy BI UDI SP Stack 05 to the J2EE Engine of the Portal
Visual Composer Server (can be on same server as portal)
Windows 2000 Server
MS SQL Server 2000 SP3 as Data Persistence
MS IIS 5.0
Microsoft XML Parser 4.0
Visual Composer Client (design time)
Microsoft Internet Explorer 6.0 SP1 or higher
Microsoft XML Parser 4.0
Adobe SVG Viewer 3.0
Visual Composer Client (run time)
Content created by VC 6.0 runs on any clients supported by portal version it is running on (see PAM for Details)
The SAP NetWeaver Visual Composer for the EP 6.0 is installed in two steps:
SAP NetWeaver Visual Composer Storyboard Install for SAP EP 6.0
SAP NetWeaver Visual Composer Add-ons for SAP EP 6.0
Install the story Board
Assign IIS virtual Directories
You can install addins
The SAP NetWeaver Visual Composer Add-on for SAP EP 6.0 is installed on the Portal Server.
Main activities performed during the install are:
Installing a rar file (Resource Adaptor Archive) using EISConnector (Enterprise Information System Connector) in SAP J2EE
Installing a NetWeaver kit for SAP EP 6.0
Open the browser with the following url
http://<machine_name>.<domain>:<port>/VCServer
For more information How to eork check these links.
What is Visual Composer? User Guide
http://help.sap.com/saphelp_nw04/helpdata/en/01/4b7e40417c6d1de10000000a1550b0/frameset.htm
SAP NetWeaver Visual Composer - How to Guides
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
Creating Applications Using SAP NetWeaver Visual Composer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2456bf8a-0a01-0010-709a-ffc91ade9f42
How to Model Portal Content Using SAP Visual Composer No Programming Required!
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff65b5a2-0a01-0010-5b97-e747192a1d49
Troubleshooting VC:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8ee70a47-0a01-0010-d198-f94c2d7d320c
VC e-Learning:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5a35194b-0a01-0010-7598-a4bb10e0c5c9
For installation, u have to download from service market place only.
Check this thread,
Visual Composer 7.0 installation
I hope it will help you in understanding VC and its installation and How to work
Regards,
Rudradev Devulapalli.

Install Visual Composer

Hello Xerpts,
I would like to know where to find the installation file for Visual Composer 7.0,
Also, if there is a J2EE enginr installation please provide the link, in Service Market Place.
Thanks

Hi
To ensure that it is installed already, Check out by doing this..
1. Open your Internet Web browser with network access to the Visual Composer server.
2. In the address bar, enter the URL to the Visual Composer server as follows:
http://<machine name with full domain>:<portnumber>/VC/default.jsp
Ex:http://ie10dtxpls1.abs.com:50000/VC/default.jsp
3. Enter your username and password to login..
or
You can refer to the SAP Visual composer Installation documentation..
[Click here for the documentation|http://help.sap.com/saphelp_nw70/helpdata/en/43/395a596c8a1806e10000000a1553f6/frameset.htm]
Any Rewards are accepted..
Thanks,
Mohan

Can't open Visual Composer

I installed Sap NetWeaver and tried to open visual composer by typing http://localhost:50100/VC/default.jsp. Then I get a message saying:
Failed to open workspace due to the following error: Kits manifest is bad or missing
MOre Information
Failed to invoke the function: 'actionKitsManifest of the remote service: 'LibManager'
Please help to fix this problem.

Hi I've copied the following section from the VC 6 installation manual.
It worked from me, maybe it works for you:
4 Preparing the Visual Composer Client
Machine
Visual Composer Storyboard, operating on the Visual Composer server, is the design
environment in which you create your portal content. It functions as a thin-client application
that can be accessed from the Internet Explorer web browser of any machine with network
access to the Visual Composer server. See the Visual Composer User Guide for instructions
about logging on to Visual Composer Storyboard from a client machine.
In order to log on to and work with Visual Composer Storyboard, be sure that your Visual
Composer client machine meets the following software requirements:
Microsoft Internet Explorer 6.0 SP1or higher
Microsoft XML Parser 4.0
Adobe SVG Viewer 3.0
Download MS XML parser 4:
http://download.microsoft.com/download/9/6/5/9657c01e-107f-409c-baac-7d249561629c/msxml.msi
Download SVG from
http://www.adobe.com/svg/viewer/install/mainframed.html
Best regards, Marcel.

Testdrive NW 2004s SP10, Visual Composer message: no BI System defined....

Hi,
i installed WebAS Java and WebAS ABAP with BI Stack, in WebAS Java i used the template installer with BI Scenario and connected the WebAS ABAP without any error's all Steps passed green, SLD is running. If i start the Visual Composer and Click on BI Integration Wizard i get the message: "no BI Systems defined in portal....."
How do i configure the SAP JDBC or XMLA Adapter for Visual Composer ? I found some entries in Visual Administrator in Services->Connector Container->SDK_SAPQ or. SDK_XMLA
Is this the right location to configure the parameter for Visual Composer ?
Can someone post a link or screenshots how to configure Bi Systems for Visual Composer ?
Thx a lot.....

Hi Roman,
Wondering if you solved this problem and how cos i have the same issue.
thanks and regards,
dilanke

No Visual Composer server was found at specified address

Similar Messages

Maybe you are looking for