No visual in DVD player

I recently tried to watch a tv show on my macbook pro, and after inserting the disc the DVD player popped up automatically and then sound started playing but there was no visual. I then tried another disc and the same thing happened again, no visual. What can I do to fix this?

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Similar Messages

Apple's DVD Player: audio in-sync. External DVD Player: audio out of sync

I exported my Sequence from FCP to QT, used compressor to make m2v and ac3 (Dolby) files, then used DVD SP to burn a DVD.
When I play the DVD on my Mac Pro using Apple's DVD Player, MPEG Streamclip or VLC, the audio is in sync with respect to the images, FCP's Canvas and FCP's QT export.
But when I play the DVD using any of three different external DVD players, the audio momentarily drifts out of sync by 30 to 40 frames, near the end of my 30-minute program, but is back in sync after about a minute, when the shot at hand ends and the next shot begins.
More specifically, it's as if the video lags by about 30 to 40 frames, but there is no stuttering or other obvious visual sign that this is happening.
Why would Apple's DVD Player, MPEG Streamclip or VLC play the audio in sync while these external DVD Players play it out of sync?
I should add that in order to verify that the TVs to which the external DVD players are attached are not the source of the problem, I monitored the audio using headphones connected directly to the audio outputs of the DVD Players as well as connected to the headphone jacks of the TVs, and there was no difference, i.e. in both cases, the audio drifts out of sync momentarily, as I describe above.
I can only think that DVD SP is muxing the m2v and ac3 file in such a way that software DVD players can demux it without difficulty, but hardware DVD players cannot.
Does anyone know how to fix this problem?
Thanks.

Please tell us what was wrong.

DVD burned on iDVD stutters on DVD player. Am I doing something wrong?

Hi there, i'm new to burning DVD's and using this Apple Disscusion, so please bare with me!
So, I tried to use iDVD to burn a home movie onto my disk which is:
Aone
8X
DVD-R
120 Minutes
4.7GB
Everything seemed to burn fine onto my disk and played back perfectly on my Macbook, however when I put the disk into my Samsung DVD player, the movie is unwatchable. The audio and video stutters, pauses, skips; even on the menu screen and then at about 3:50, the movie flicks back to the start.
I don't think it is the DVD player or the disk as it plays other DVD's perfectly, even one from a friend with home movies on using the exactly the same disk.
Therefore I was wondering if is iDVD doing this? If so, is there any way of solving this problem? I am currently burning at a speed of 8X, does this need to be different? Also in Project Info, the encoding is set to professional quality. Other options in Project Info include:
Video Mode - PAL
Aspect Ratio - Widescreen (16:9)
DVD Type - Single-Layer (SL) - 4.2 GB
I hope I have given all the information needed,
Any help would be greatly appricated!
Thankyou!

If You keep frame rate from start to end. Then my next thought is about material used. That this might create a problem for iDVD and resulting DVD-disk.
My collection of thoughts (mine and others)
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

DVD burnt in BEST QUALITY but looks like a VCD when played on DVD player

Made a 115 mins movie in Final Cut Pro, exported it to Quicktime and made a project in iDVD 6. If I check the quality of the movie before I burn it, it is all right, I select BEST QUALITY on iDVD setiings before I burn it but, then when it's ready, I check it on the DVD player and it is in very low quality, like if it was a VCD, it shows little squares on the images. Not the whole video but several times during playback. I've burnt dozens of videos like this one before and it never gave me taht problem but the last 3 videos I've burnt it shows it.
HELP ME PLEEEEEEASE!!!!!

I select BEST QUALITY on iDVD setiings before I burn it but, then when it's ready, I check it on the DVD player and it is in very low quality, like if it was a VCD, it shows little squares on the images.
Set it to Best Performance if you are concerned about the highest possible visual quality w/in iDVD6 (keep in mind you cannot exceed 1 hr. in this particular mode).
Also remember to burn from the disc image at 4x or slower using Roxio Toast or apple's Disc Utilities. I recommend using Verbatim or Maxell DVD-R for best results.
Good luck and hope this is Helpful.

Are there glitches in iMovie or iDVD that would create problems with viewing a finished project on a standard dvd player?

Everytime I render a new project in iMovie and share it with iDVD to produce a video, there always seems to be glitches in the finished project. I have gone back and tried to recreate the slideshow, but have not had a whole lot of luck. I am wondering if I need to delete the iMovie and iDVD applications from the computer??? If I do that will it fix my problem or will I even be able to redownload the programs without having to pay for them again? I have spent more time and $$$ trying to get a viewable disc to burn and am ready to get rid of the computer altogether. Hopefully that will not have to happen, but this is a constant issue that I go through everytime I work on a project. Any suggestions???

Hi
Yes and No.
There are Bugs and ways to make better or Worse DVDs - see if this can help.
There are two "Bugs" (or at least one)
• In iDVD - do not go back to video editing program - if You got Chapters set in Your movie - if You try - then now back in iDVD it will ask You to up-date ==> all Chapters will point to Chapter one. Medicine - create a brand new iDVD Project.
• There MUST NOT BE any Chapter mark set in very beginning of the Movie - or in any transition or within 2 seconds from them.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser ( AND AS MEDIUM - not HD etc as DVD then will suffer in quality ) or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Subtitles in Apple DVD player won't go away

This is not a Tiger problem per se- more of an Apple DVD player problem. I couldn't find a forum for the DVD app. If I'm in the wrong place, I'd be happy to post in the proper place if someone could point me in the right direction.
So I'm running os 10.4.7 on an 800 mhz iMac (flatscreen, "lamp" model), my version of the Apple DVD player is 4.6.5, framework version 4.6.6.
Here's the problem- whenever I watch a movie (this seems to happen only with American DVDs), these QT/OS X looking (beautiful crisp white letters on a highly transparent smokey grey field) subtitles appear, they are independent of the subtitles invoked by the subtitle button in the player- I can toggle through all the languages, they work fine, but the QT/OS X looking subtitles never go away- I'll have two sets running simultaneously. (Or just the QT/OSX one, when I set subtitles to "off")
While they are gorgeous and superior to the "other" set of subtitles (which I CAN control), in both visual appeal and intelligent placement, I would like to be able to turn them off.
I thought a handicap access feature in the System Preferences might have been involved, but it doesn't seem so.
Can someone help me turn this off? Incidentally, these phantom permanent subtitles weren't always here, though I can't really say when they appeared.
Thanks in advance for the help,
Nosloj2400

Do you have "Closed Captioning" (DVD Player "Controls" menu) turned on? You may have turned it on accidentally via Option-Cmd-T.

Is DVD Player higher quality than standalone DVD player?ne

I tried finding an answer to this question with various searches and could not, but I apologize if this is a repeat question.
I'm a teacher and I'm showing DVDs (not Blu-Rays) to my class. I have a fairly new LG HDTV in my classroom. I don' have the model number but it's an LCD, and I think it's a 52 inch. I'm trying to decide whether the picture quality of DVDs will be higher by playing them on my MacBook Pro or on a standalone DVD player. My MacBook is the 6,2 version (15 inch), so I can hook it up to the TV through the minidisplay port with an HDMI converter. I'm just using the DVDplayer software that came with the MacBook Pro.
The standalone DVD player has just standard audio/video connections--no HDMI port, (which I'm assuming doesn't really matter since I'm just using standard DVDs).
Is there really going to be much difference, either visually or auditorially, between these two setups? It's about as easy to use either one, and from a quick visual comparison I can't see much difference, but I want the best quality I can get. So any advice would be appreciated.
Thanks.

No difference or worse from the MBP compared to a Real DVD player.
A Real DVD player is designed to do one thing. That is to send a signal from a DVD disc to a TV screen. This can be done over coax cable, composite connections or HDMI cable. A computer does many things one of them is to play movie DVDs. But first it must go through all the electronics of the computer and then out through only one port and then be changed to a style of port the TV can accept.
Also your MBP will get HOT when you are using it for this purpose. Just load up a DVD and watch how hot it gets displaying in on the internal screen.
So use the Real DVD player.

Can i burn quicktime files to watch on home dvd player?

is it possible to burn some movies i have downloaded onto my computer, which i watch with quicktime and real player etc, to be able to watch them on my home dvd player as a film?
when i burn them now, it just does them as files and it wont play on my dvd player?

Yes. There are various ways & 3rd party software that will do all the work for you.
I am assuming you are trying to burn using Disk Utility?
It’s a good idea to verify the disk image before burning it. Simply mount the image, and open you DVD PLAYER app. When that’s done, go to FILE and OPEN VIEDO_TS folder. Choose the VIDEO_TS from within the mounted image and then press play. It should play back now as a dvd.
Step 1. Launch Disk Utility (Applications > Utilities).
Step 2. Click Burn on the Disk Utility toolbar (upper left).
Step 3. Navigate to where you saved the DVD image.
Click on the image file, then click the Burn button. Do not drag and drop the image file into Disk Utility during this step.
Step 4. Insert a DVD when prompted and proceed to Burn it.
Another help source (if you haven't already done so).
Open Disk Utility.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
3rd party burning utilities:
Toast
Visual Hub
Burn

How to burn project to DVD so it can be viewed on any DVD player?

Hello,
I am new to iMovie and currently using it to make a movie that I want to give as a Christmas present, therefore I want to burn the movie to DVD so it can be watched on DVD players as well as computers.
I have done research and found that iMovie no longer allows you to burn DVDs via iDVD...
So my questions are:
1) When exporting my iMovie, what file format should I use for best compatibility (can be view on PC, MAC or DVD players)?
2) What is the best free DVD burning software to use to get the movie onto DVD?
Thanks for the help!

1) So a .MOV file is the best way to export the video from iMovie?
Don't know - but should work OK. alt. .mpeg4 / H.264 - but might be more of a problem
2) A .MOV file burned onto a DVD will be playable on DVD players?
NO - a Video-DVD (that can be played on any standard DVD-player) must be created using a DVD authoring program as iDVD etc. AND use Verbatim DVD-R disks to be on the safe side. Memorex is known to be problematic and so is +/-RW and DVD+R only plays on newer DVD-players.
3) What quality should I export from iMovie in? My vidoes are in 1080P I think.
DVD - is as Standard (Whatever program used) only interlaced SD-Video and most programs are bad on Downscaling = Share to MediaBrowser and as Medium use to give best possibly result (if You do not use iMovie HD6 or FinalCut as they can deliver even better result)
else I do not know
on DVD Quality I've collected this.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Help - my DVD won't play on DVD player or pc

I have a new macbook pro, and have created a large photo album on iDVD. I have tried 3 times to burn it to a DVD to play it on my TV. The first 2 times the program said it only had less than a minute to complete, but went for more than an hour. The DVD's were burned, but would not play on DVD or PC, but would work on my Mac.
The 3rd time, it went through whole process and it actually completed and ejected the DVD, but when I put it in our player I got a "disk error" message.
I am using DVD-R discs. Can someone please help? Or other ideas on how to get a slide show burned to DVD to play on TV?
Thanks
Sharona

Sharona
Did you create a slideshow on iDVD, or create one in iPhoto and put that into iDVD or create a slideshow in iMovie? How many photos are in your slideshow? Some DVD players will not play more than 99 photos, and other players will stutter/skip/pause for a few seconds and then resume playing.
Did you do it like this?
From iDVD Help:
+Creating a slideshow in iDVD+
+Using the slideshow editor in iDVD you can create slideshows from images in iPhoto or from images stored in other places on your hard disk or a connected server. You can also include movies in your slideshow.+
+To create a slideshow in iDVD:+
+Make sure the menu that the slideshow will be accessible from is showing in the iDVD window.+
+If you want the slideshow to link from the main menu, for example, the main menu should be showing in the iDVD window.+
+You can proceed in one of two ways:+
◼
+Click the Add button in the lower left of the iDVD window, and select Add Slideshow from the pop-up menu. A button labeled My Slideshow appears on the menu.+
◼
+Drag an album to the DVD menu. This automatically creates a button that links to the slideshow. The button has the name of your iPhoto album and, if the button is an image button, it automatically displays the first slide in the slideshow.+
+Double-click the button to open the slideshow editor.+
+The iDVD window changes to show the Photos pane if it is not already selected.+
+If you started by adding a My Slideshow button to your menu, the slideshow editor is empty, so you need to drag images to it from the Photos pane, described below.+
+If you started by dragging an album to your menu, the slideshow editor shows thumbnails of the photos in the slideshow. To view photos as a list instead, click the list icon in the upper right of the iDVD window.+
+Add, arrange, or delete photos or movie clips from the slideshow to create the sequence you want.+
◼
+To add images, drag individual photos or folders from the Photos pane or from elsewhere on your hard disk or a connected server to the slideshow editor.+
◼
+To add movies, drag individual movies from the Media pane or from elsewhere on your hard disk or a connected server to the slideshow editor.+
◼
+To reorder the images or movies, select the ones you want to move, and drag them to a different position.+
+If you add a photo album and do not reorder the images, the slideshow displays your photos in the order they are organized in the photo album.+
◼
+To delete an image or movie, select it and choose Edit > Delete, or press the Delete key.+
+Click the Settings button (shown below) and select the settings you want for the slideshow:+
◼
+“Loop slideshow” makes the slideshow repeat continuously until the viewer moves to a different part of the DVD.+
◼
+“Display navigation arrows” shows navigation arrows on the screen. It’s most helpful to display arrows when you set the slideshow to progress manually, which means the viewer controls movement from slide to slide. These arrows are simply a visual cue; the viewer must use the remote control to advance the slideshow.+
◼
+“Add image files to DVD-ROM” adds copies of the photos and movies to the DVD disc so viewers can download them to their computers.+
◼
+“Show titles and comments” lets you add titles and comments to the photos and movies. These are visible in the slideshow.+
◼
+“Duck audio while playing movies” silences any soundtrack you have added to the slideshow while the movie in your slideshow play. This ensures that the slideshow soundtrack and movie audio do not play at the same time.+
+Click the Transition pop-up menu and choose a transition to smoothly move from one image to the next. Only one transition can be applied to a slideshow.+
+To preview a transition, click the Preview button (shown below). The iDVD remote control appears. Use your pointer to click the arrows in the remote control, which highlights buttons on your menu. Highlight the button to which you have added a transition and click Enter on the remote control. Click Exit to return to the slideshow editor.+
+Click the Slide Duration pop-up menu and choose the length of time you want each slide to stay on the screen. (You cannot set a custom duration time, and the duration you select applies to all slides in the slideshow.) Be sure to allow enough time for the transition you selected.+
+To let the viewer advance through the slideshow manually using a remote control, choose Manual. If you want to add a soundtrack to your slideshow, you don’t need to set the slide duration.+
+The slide duration you set does not apply to movies you add to the sideshow. Movies in a slideshow play in their entirety before the next slide appears.+
+Click the Return button to exit the slideshow editor.+
+The duration of your slideshow, in minutes, appears at the top center of the slideshow editor. As you add and remove images, transitions, and so on, you can keep track of how long the slideshow is.+
+When you add RAW images from iPhoto, the RAW files appear in the slideshow as JPEG images. If you choose to save the photos to the DVD-ROM portion of the disc, so that viewers can download them to their own computer, iDVD saves the RAW files, not JPEG images, there.+
+To learn how to add a soundtrack to your slideshow, see Related Topics below.+
+NOTE: A slideshow that you create in iDVD does not show up in the Media pane and is therefore not accessible for use in other iDVD projects.+
Did you create a disk image with your iDVD project? That can often help pinpoint burning issues.
From iDVD Help:
+You can test your project before you burn it by saving it as a disc image. The disc image of your project is a fully encoded version of the project that you can play in DVD Player (which comes on your Mac) or burn to a disc later. You can preview the disc image to make sure your project plays correctly and then make changes, if necessary, before burning a disc.+
+To create a disc image of your project:+
+Choose File > “Save as Disc Image.”+
+Type a name for the disc image.+
+Choose where you want to store the disc image.+
+Click Save.+
+Double-click the disc image icon when the disc image is ready.+
+Launch DVD Player, in your Applications folder.+
+Your DVD project begins playing on your computer. Use the controller to navigate to and view all the content on your DVD. If everything works, the DVD you burn will work in most newer consumer DVD players and computers with a DVD drive.+
You may also find these helpful:
http://support.apple.com/kb/TA23794?viewlocale=en_US
http://support.apple.com/kb/TA23793?viewlocale=en_US
Be sure to use a good brand of DVD-R disks, such as Verbatim or Maxell. Choose a burn speed of 4x or less.
Post back if none of this helps.

Is there a way to create a slideshow viewable with a DVD player?

Hi there, is there amongst the Apple programs (or else) something that would allow me to show my digital photos on TV with a DVD player? Manually commanded with the remote, or with auto time lapse, fading or transitions?

I tested both Photo Magico and iDVD. Both produce a nice slideshow with good image quality when previewed on the computer. PhotoMagico has some really professional grade blending and zooming effects, and allows placement of multiple sound tracks, which is not possible with iDVD where you just drop one file and it plays in buckle.
The problem with both is that when the slide show is encoded, it looses too much quality! Images loose their detail, their colour depth, and they flicker inacceptably. The worst is with PhotoMagico who sends the already compressed file to iDVD to be compressed again and burnt. The loss of quality from the very neat preview to the resulting DVD is enormous. Sent to Toast Titanium, it's a little better but aliasing effects are still very annoying.
I then tried a slideshow made directly in iDVD. The quality is merely acceptable, still not professional. The images are so compressed that they loose their details, and the edges of the frames and every straight line in the images flicker...
Compressing an original 5 Gb slideshow made of JPEG files to 1,5 Gb seems an enormous rate of compression. Is this the way it is with those programs, or have I missed some settings somewhere? Is there no way to preserve the initial image size when passed to DVD? Alternatively, would the pro version DVD Studio Pro have more flexibillity? It's there on my computer, but the interface is turning me away! ...
Thanks again for any hints!
Paul

DVD player 5.4 keeps crashing using a variety of DVDs. I have OS 10.6.8, and have repaired permissions, verified the disc, and installed the 10.6.8 update combo. Several previous questions have adressed this problem. What is the solution?

DVD player 5.4 keeps crashing. I have seen here that a number of other people have had this problem. I recently started one DVD, and when I went back to it, it opened to a black screen twice. It also crashes with other DVDs after I scroll ahead or back. It gives an error message that it is skipping damaged areas, or sometines error 69889. Playing this on a PC, however, there is no problem. I repaired the permissions, verified the disc, and installed the OS 10.6.8 combo update, all to no avail. Techs told me that it is usually the hardware, so I bought a LaCie external combo drive. Still crashes. Looked on Apple downloads and they don't list a 5.4 to replace this version. Mac informer.com offers a free download for DVD 5.5- should I try this? Why doesn't Apple fix this problem?

Your suggestions did not help. I repeated them again after the first try did not succeed. Any other ideas?
Would installing another copy of DVD 5.4 help? How can I get another copy of DVD player 5.4, since Apple does not seem to offer it? I do have the disc for Snow Leopard, but am not extremely tech savy (and maybe it is the same corrupted version).

Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?

I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?

Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

DVD player full screen on external display

I'm looking for a way to play my DVD full screen on my external display while I can work in other apps on the main screen. Preferrably with Apple DVD Player (OS X 10.7 Lion in my case). Any ideas? Hidden settings perhaps?
It's stuff like this makes feel let down by Apple. It's natural feature to want this like for instance when playing DVD on a big screen in front of an audience and prepare something on the main display for viewing.

I know I can do this already with VLC. For some discs that don't play well in VLC I'd prefer DVD Player though.

Satellite C855D Toshiba DVD player display suddenly stopped displaying

Please help as its now beyond me. The DVD player has suddenly just stopped. I can hear it and control it but cannot see it. I have checked the diplay button but its all ok.
Help

Im sorry IJK.
I thought it could be possible to download the Toshiba DVD player but it seems that this software is licensed and it cannot be downloaded from Toshiba driver page.
Its part of the Toshiba image. So you can get this tool only reinstalling the Toshiba image using the HDD recovery or the created Toshiba Recovery medium.
However, recovering the system would mean that the whole system would be installed again congaing previous HDD format. So in such case the data backup should be created before starting such procedure.
Another option: you could try to set the system back to early time point before the Toshiba DVD tool has crashed.
Last but not least you could try to install other freeware DVD player software like VLC player. It one of the best player software which is available on the market

No visual in DVD player

Similar Messages

Maybe you are looking for