No visual on my iPhone.. can receive phone calls tho

no visula on my iphone~~ but can receive phone calls.  help. how do i get full use back??

Do you mean no visual voicemail? If so, the following may help: http://support.apple.com/kb/TS4430

Similar Messages

  • I can't make a phone call from my iPad. But, I can receive phone calls. What am I doing wrong?i can reci

    I am able to receive phone calls on my iPad air 2. But, I can not make any phone calls. I am using an iPhone 6. I have set up both as required. What am I overlooking?

    Hi Bo S.,
    Welcome to the Apple Support Communities!
    I understand that you cannot make an outgoing call using your iPad. Included below are the instructions for using Continuity to make calls from your iPad. If you are set up correctly and still are unable to make a call after following the information in the article, please let me know at what point in the process the failure happens and what happens at that point. 
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Cheers,
    Joe

  • I can receive phone calls on computer, but can't make them

    10.10.1 on macbook pro late 2011, iphone 6 (8.1.2)
    Airport Extreme connected via ethernet to airport express. Same ssid
    I can receive calls but when I try to make a call out of contacts, it says your iphone and Mac must be on the same wi-fi network.
    Any ideas?

    Your computer is too old.
    Handoff Continuity System Requirements

  • My Iphone wont recieve phone calls

    Hiya everyone,
    As the title says my iphone wont receive phone calls, when you phone it it just goes straight to answer phone and some times it takes for ever to receive texts as well. is there anything i can do to fix this??
    Thanks very much
    Ryan

    Hi Ryan,
    An easy troubleshooting step that may resolve the issue is restarting the iPhone. You can do this by holding the Sleep/Wake button until the red slider appears> then slide to turn off> and turn the iPhone back on by pressing the Sleep/Wake again, as described on page 46 of the iPhone User Guide.
    http://manuals.info.apple.com/en/iPhoneUserGuide.pdf
    If the issue persists after restarting, try the tips in this article: http://support.apple.com/kb/HT1737
    -Jason

  • I have an iPhone 5c that was purchased 10 months ago,, suddenly i can no longer make or receive phone calls, send text messages and the time is always wrong

    I have an iPhone 5s that no longer makes nor receives phone call, the time will never stay corrected. Anyone with any thoughts?

        samjohns146,
    Making sure you can use your phone when you need it is certainly a concern of every consumer. I am sorry to hear you are having trouble with your phone but you have reached the right place for assistance. Has your phone completed any recent software updates at all? Let's try resetting the network settings http://vz.to/1ovdCBD to see if that resolves the issue. Please keep us posted on the outcome.
    CandiceH_VZW
    Follow us on Twitter at @VZWSupport

  • HT4623 My texts have stopped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem contin

    My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose  texts are not getting through. We have both restarted our iphones but the problem continues.

    Have you talked to your carrier (or your friend to his)?  Could be an issue at their end.

  • Since updating to 7.0 on my iPhone 5S I am not receiving phone calls, but can receive text messages.

    Since updating my iPhone 5S to 7.0 I can't receive phone calls, but can receive texts.  Why?

    double check settings - do not disturb - off

  • Please help after updating my iphone 4 to ios 5.01 I cannot make phone calls or receive phone calls anymore. I am so annoyed first battery and now can't make calls!

    Please help after updating my iphone 4 to ios 5.01 I cannot make phone calls or receive phone calls anymore, please help, I am so annoyed first battery and now can't make calls!

    The same thing is happening with my wife's iPhone 4 and we can't figure it out. When placing a call, the screen freezes and she needs to restart the entire phone.
    She upgraded to 5.01 this morning over the air while it was plugged in. Immediately afterwards, this problem started happening. We've tried restarting the phone several times and plugged in to iTunes but there's nothing she can do do to fix it.
    Any help is greatly appreciated!

  • FaceTime on your computer can you still receive phone calls to an iPhone under the same ID

    if you FaceTime on your computer can you still receive phone calls to an iPhone under the same ID

    You can do this on the phone and the iPad. Settings>FaceTime>iPhone Cellular Calls>Off.

  • Iphone 5s cannot call out any calls, but still can receive incoming calls and sms

    Hi
    anyone experiencing this problem? After buying iphone 5s less than 2 months which I never did in the past, I could no longer make any phone calls out, yet i still can receive incoming calls and data.
    Could someone kindly assist in this? 

    Contact your carrier. Phone functions are a carrier responsibility. Have them check your account. Are you seeing any error messages?

  • IPhone 3G OS 3.0 (not able to start / receive phone calls)

    Since I've updated to iPhone OS 3.0 I can't make phone calls via the "normal" cellular network. When my iPhone is on the 3G network everything works fine.
    When my iPhone is on the "normal" cellular network with full signal and I try to make a phone call I get the "call failed" message after 10 to 20 seconds.
    When the iPhone shows it's connected to my provider via the "normal" cellular network and people try to call me they reach the voice mail
    Sometimes I can make a phone call via the "normal" cellular network and then after a couple of minutes the connection got lost and I get the "call failed" message.
    Sometimes I can make a phone call via the "normal" cellular network and then after a couple of minutes I can hear the other side of the connection but they can't hear me anymore.
    Sometimes I can make a phone call via the "normal" cellular network and then after a couple of minutes the other side hears my voice "scrambled" and the connection gets lost.
    And again, when my iPhone is on the 3G network everything works fine!
    With iPhone OS 2.2.1 everything worked fine but after the update to iPhone OS 3.0 the problems started
    I tried to restore the phone now for a couple of times without restoring the backup but nothing seems the solve this issue. I tried with different SIM cards (iPhone is sim-lock free, Belgium iPhone) but all with the same issues. At this time I don't use the iPhone anymore and switched back to my old phone "Sony Ericsson K750i" because otherwise I want be able to receive phone calls when I'm in a area where there isn't any 3G network available.
    Apple please fix this issue, I've got my iPhone for the "Phone" part, not the "i" part.

    I have exactly the same problem with my Q-Three and 3GS 3.0. I haven't found a solution. Motorola bluetooth works fine. Previously used the Q-Three with a Samsung T919 without issue. Looks like a compatibility issue. Lots of problems posted in the blogs with iPhone and Bluetooth... If you figured it out, please let me know. Thanks.

  • Samsung S5 Issue (Can't Receive Phone Calls)

    Hi everyone! I'm a bit new here but I just recently been having issues with my phone. After the recent update (the one that changed something from OC4 to OF2), my phone cant accept phone calls nor have the ability to make a phone call. My phone can still text (send and recieve) and connect to the internet (wifi & data). Since it was centered on calling issues, I wanted to check my call settings (specifically, I went to: Applications->Call->More Settings) but a popup appeared and displayed the following text: "Network or SIM card error". So far, I have tried a phone reset, checking my SIM card to ensure it's properly seated, and turning my phone off and on and to no avail. I don't know what else to do at this point. A friend of mine recommended me to visit a AT&T DSC but I wanted to consult here first and see if there's anything else I can do. Any help would be awesome. Thanks! *On a side-note, my friends and family have all tried calling my phone and they get a voice message stating that the phone isn't available or is disconnected. Hope that information helps somehow! Phone Information:Model Number: SAMSUNG-SM-G900AAndroid Version: 5.0Network: AT&TService State: Voice (In Service)/Data: (In Service)Device Status: OfficialBaseband Version: G900AUCU4BOF2 

    I do not think is a Samsung Issue, but an AT&T issue. I have an iphone 6 plus and I am having the smae problem. I cannot receive phone call suddently, but is lasting for over a day now.   They are not offering any solution.  They told me they had received a lot of tickets with the same issue all over different States, but no news of a solution.  It seems the company is becoming way too big, maybe they cannot handle the volume. I do not know what it is, but it is anoying and I do not like it.  I know it is not my iphone.   

  • My phone isn't connecting to 3G and I can't send or receive phone calls or texts.

    So my phone just stopped being able to connect to 3G and stopped being able to send and receive phone calls and texts. It was working fine this morning and it shows that I have multiple bars "dots" but my 3G is reading 1x and says I can't make a connection. What should I do?

    If you have looked where James suggested and you are saying that the phone number does not appear in there at all, you can add the phone number to the iPad but you may need to sign out of Messages on the iPad AND the iPhone.
    Phone number missing on iPad or iPod touch
    If your phone number is not listed on an iPod touch or iPad, follow these steps:
    Update to the latest version of iOS.
    Verify that you're using the same Apple ID that you are using on your iPhone.
    On your iPad or iPod touch, sign out of your Apple ID in the following locations:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    Sign in to your Apple ID with FaceTime and iMessage.
    If your phone number is still not listed, follow these steps:
    Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    Sign in to your Apple ID on your iPhone.
    When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and also in Settings > FaceTime.
    Now sign in to your Apple ID on your other iOS devices.

  • I have a data connection but I can't make or receive phone calls or texts

    I have a 3G data connection on my iPhone 5 at home, but I can't make or receive phone calls or messages.. I can surf the Internet though. I talked to a sprint representative and we went over everything and couldn't figure it out. Can some one plz help with this issue???

    Phone and messages is a carrier issue. Sprint needs to check your account to make sure it is set up correctly. If everything looks good on their end, then do a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, try it.

  • Can't receive phone calls or texts

    Hi everyone. I'm using an iPhone 4S and just opened verizon yesterday. However, I'm not able to receive phone calls or texts, but I'm able to call and text other people and access the web. I already reseted my network settings, triple checked that i'm not forwarding my calls anywhere, and my blocklist is empty. I also put the airplane mode on and off as some threads suggested but it didn't resolve it. It also can't be about bad signal because I live downtown in one of the biggest cities in this country and my signal is flawless.
    All help is appreciated. Thanks a lot in advance.

    To anyone facing the identical problem, the solution for me was that my previous operator (I transferred my number from T-mobile) had not fully given up their part on the deal. So I went to verizon store, they called T-mobile and got it sorted out. The situation was that any incoming call/text went to my sim-card which was still under t-mobile, and all outgoing calls/texts that i was making came through my verizon phone which was registered for this number. So, maybe this will solve it for you too if you have this problem.

Maybe you are looking for

  • Wrong Calculation of  Sales & Administration Cost and COGS

    Dear Sir, We have a scenario where we charge Over-Head on the Labour . Accordingly we have made necessary setting in the configuration .  But in the Cost Run , we find that  COGS  / Sales & Administration Cost  is getting calculated wrongly . To expl

  • QuickTime 10 wont open/respond

    My QT will not respond, I don't have the sligest clue as to what happend.  I am curently using the latest software update Mac OS X Lion 10.7.4 . Have anyone out there have this type of issue? If so could you be kind to tell ma how you fix it?  Thanks

  • Fitching a specific number of rows

    hi all i want to fitch a specific number of rows in my query not all matches (SQL2000 Server ) what command in my sql query can be placed to do so thanks

  • ALV printed in batch with fixed columns

    Hi, I am trying to print an ALV List report in a batch job. Fixed column widths and a filter on the layout was a requirement, so I have a layout variant as part of the initial selection screen and my batch variant. When I print online, it looks great

  • X Fi - Problems with the Analog Jac

    Hi i recently upgraded to the X Fi XtremeGamer and my microphone is not working. the sound is working perfectly fine, amazing actually. I've reinstalled drivers, changed PCI slots, asked around for tips, nothing. Is it common to have a red light comi