No voice output - only in navigation
I tried four diffrent navigation software but on none of them I got voice output. Music or other sound output is no problem.
Anyone who knows about that problem?
Best Regards
No one?
Similar Messages
-
Headset Mic Voice Output to 5.1 Speaker Unwan
Hi. I have a Soundblaster X-Fi XtremeGamer PCI Soundcard that I have configured to output to a Logitech z-5500 5. Surround Sound. which works fine.
I have the motherboard on-board soundcard to output to the headset speakers.
I have also got a headset mic set that I am using with Ventrillo. The setup I am trying to get is that voice speech only comes out of the speakers of the headset and not the logitech 5. speakers. And the game music to come out in 5. surround sound.
Hardware Setup
Soundblaster X-Fi XtremeGamer PCI
Asus P5K Premium Wi-Fi/AP Onboard Soundcard Analog Devices HD Audio SoundMax
Logitech z-5500 5. Surround Speakers
Seinheisser PC-66 Headset/Mic (/8" Headphone Jack + /8" Mic Jack)
Wire Config:
SoundBlaster
3x output? to 5. Speakers
x Mic Input from Headset
Onboard
x output to Headset (green)
Software Config:
Vista x64
Soundblaster Driver (latest)
Soundmax onboard Driver (latest)
Ventrillo Latest
World of Warcraft
I have got it configured (i think) and it seems to all be working fine but I have noticed that when I am not in game or Ventrillo and in the standard Operating system Vista x64. I notice that I get my voice output to the 5. speakers from my mic if I speak or move the mic. I am trying not to get any interference or sound output from the mic to the logitech speakers.
Did any of you receive a similar problem.. and if so how did you resolve it. As I only want whatever comes IN from the MIC to only OUT to headset speakers.
Thanks
DeltaLets Keep this thread alive, i need the SPDIF in
I did the same thing with no result at all
No sound what so ever from my DVD or Xbox
Looking through all the options as Standard sound settings, NVidia soundsetting and showshifter soundsettings but............... not one tone
Temp is still a problem
I'm starting to feel things like return this beta machine back to the test facillity from MSI, cous thats where it belongs (BETA PRODUCT)
I managed to do the fine Art of Lapping and Hacksaw the HDD console
On the other way things like showshifter works allricht with this setup
I'm going to try all the in and outputs this weekend, see what wil work and what not -
Unity Connection Voice Mail Only- NO MWI template
I am deploying a site with 8,000 mailboxes. 4,000 of those users are voice mail only without a telephone and will NOT require MWI.
I can manually remove the MWI setting from each mailbox, but I am looking at either a BATCH CSV setting or a TEMPLATE that I can turn OFF mwi when creating the users.
Any ideas?
TIAHi there,
This setting change is available via Bulk Edit
Bulk Edit> Messages> Disable MWI functionality for this user
Bulk Edit changed in 8.x from where it was accessed in 7.x.
Here's a clip that speaks to how this is run now. You first search and select all
the users you want to change and then choose Bulk Edit;
To Edit User Account Information in Bulk Edit Mode (some editing from original > this example
is for Caller Input settings but you'll see the point)
Step 1 In Cisco Unity Connection Administration, on the Search Users page, check the applicable user check boxes, and select Bulk Edit.
If the user accounts that you want to edit in bulk do not all appear on one Search page, check all applicable check boxes on the first page, then go to the next page and check all applicable check boxes, and so on, until you have selected all applicable users. Then select Bulk Edit.
Step 2 On the Edit Caller Input page, change settings as applicable.
Note The Status message at the top of the Edit Caller Input page tells you how many user accounts are being edited. Also note that the page is populated only with the fields that you are allowed to edit in bulk mode, and that the fields available for edit also depend on whether all of the user accounts reside on the local server.
Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.
Step 4 Select Submit.
Step 5 If applicable, continue to change settings for these user accounts on the related pages available from the Edit menu. As you make changes on each page, select Submit before going on to the next page to make additional changes.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/user_mac/guide/8xcucmac090.html#wp1049545
Try a couple of test users first to come up with the exact plan.
If you prefer you can also use Bulk Edit via .csv
As a test here I tried the Bulk Edit and chose;
User with Voicemail > Users referenced in this CSV file > Next
This then allowed me to browse to an existing "basic" .csv that I had
used to create a test user recently when playing with BAT. In this .csv
I had one user named Bob Uncle with DN/ext 5126. So when I used this method
the Bulk Edit tool (smart puppy ) selected only Bob Uncle for my edit choices
and I was able to change the Disable MWI functionality for this user
Again, please try manipulating some test users to perfect
your methodology.
I have attached the test .csv I used
Cheers!
Rob
Attachments: buncletest Mailboxes.csv.zip (255 bytes)
"Show a little faith, there's magic in the night" - Springsteen -
Dtt3500 and Audigy Gamer, digital output only 2 channel unless its D
Ok I recieved a response concerning my last comment but unfortunatly it did not answer my question at all. I have a DTT3500 and a sound blaster Audigy Gamer hooked up with the digital out to the /8 din adapter. I try the advanced 3d demo that came with the Audigy software and I only hear the front 2 channels, no center and no rears. The demo where you move the little icons and sound moves along with it. I have 5. activated in my windows control center along with audioHQ and digital out only is selected. my DTT3500 has 4./5. digital selected along with dolby digital/pcm audio and digital in. I am not getting the effect of multisurround at all. My center works and my rears work because playing music I can use all 5 speakers. When I use the analogue outputs I hear multisurround from the advanced 3d demo but my center doesnt work. The analogue setup sounds better but without a center channel its useless to me. Am I doing something wrong? I am using the adapter and digital DIN, what gives? The only reason I noticed I wasnt getting surround was while playing games nothing comes from behind you even on 5. games. The goldmine demo doesnt even work right, when the bird flys behind you it disappears but there is still sound from the rears. Analogue fixes this without a center but the manual and setup say to use the digital din. Do I just have a setting wrong? I would like to experiance the full capacity of multispeakers in my games.
Dennis,
With these speakers the connection that I would suggest would be to use the Digital out on the back of the sound card into the DIN Input on the DTT3500's. This will require a converter cable for /8'' Minidin to standard DIN which can be purchased from here:
http://us.creative.com/products/prod...0&product=0375
You will also need a standard DIN cable (one should have shipped with your DTT3500's).
This should give you 5. with digital output only enabled on the Audigy.
Jeremy -
Triggering Invoice Output only first time
Hi,
I want to trigger an Invoice output(Email : External Send medium) only when it is created for the first time.
The reason for doing this : The document generated is a contract invoice and some additional warranty info needs to be in body of the email for the partner types maintained in the contract.
Also is there a way we can get the Bold Text in the email. I am using some standard texts to build email body and then calling
SO_NEW_DOCUMENT_ATT_SEND_API1u2032 .
e.g. Contract Number: 12345
Appreciate if anyone has worked on such scenario. I am considering using routines.
Thanks,
RaoTo Issue output only once, do the following setting
Go to Transaction code NACE -> Select the Application (V3-for Billing -> Click on Output types -> Select the required output type -> Click on View Button -> Remove the Tick mark from the option "Multiple Issuing".
Regards
Vinod -
Hi,
In our IC webclient, when we enter a business partner, if nothing is entered in the address fields it creates ok but when we come back to change the partner again, the address fields are output only, so we can't enter anything in them. If we do enter address details when we create the partner, they are available ok for changing at a later date.
Can anyone offer any advice on how we solve this ? I've taken a look at transaction BUCG. The fields in question are set to 'optional'.
thanks,
Malcolm.anyone ?
-
How to make pricing field as output only in sales order header and item lev
Hi ,
I want to make the field PRICING DATE as output only both at header and item level. How can i do pls guide me in detail.
Regards
SunainaHi Sunaina ,
Through User Exit you get this requirement plese take help of ABAPer to activate the user exit according to your requirement.
Try With this User Exit
Program MV45AFZZ
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
I hope it will help you,
Regards,
Murali. -
G60-230US Laptop - HDMI cable does not provide sound output only video
HDMI cable does not provide sound output only video. I have the following device adapter - Mobile Intel(R) 4 Series Express Chip Set Family, and two sound, video, game controllers - Coexant High Definition Smartadudio 221 and Intel (R) HIgh Definition Audio HDMI. I do not see any option but "Speakers" on the Sound "playback" tab. Not sure what to do to fix
With the cable connected to source, click to select/highlight the Intel HDMI. next click the 'Set default' button.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Making parameter fields output only dynamically
Hi all!
I have four different radiobuttons in a selection screen and when some of them are chosen I want some parameter fields in the selection screen to be output only. Is that possible or do parameter fields have to be made output only in the at selection-screen output event?
Thanks
MagnusHi,
check this code :
PARAMETERS: r1 RADIOBUTTON GROUP rad1 DEFAULT 'X',
r2 RADIOBUTTON GROUP rad1.
PARAMETERS: TXT1(10) type c,
TXT2(10) type c,
TXT3(10) type c,
TXT4(10) type c.
implement below code under AT SELECTION-SCREEN OUTPUT event.
AT SELECTION-SCREEN OUTPUT.
When user selects the first radio
IF r1 = 'X' .
LOOP AT SCREEN.
IF screen-name = 'TXT3' OR screen-group1 = 'TXT4'.
screen-input = '0'.
MODIFY SCREEN.
ELSEIF screen-name = 'TXT1' OR screen-group1 = 'TXT2'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF r2 = 'X' .
LOOP AT SCREEN.
IF screen-name = 'TXT1' OR screen-group1 = 'TXT2'.
screen-input = '0'.
MODIFY SCREEN.
ELSEIF screen-name = 'TXT3' OR screen-group1 = 'TXT4'.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
Regards
Appana
*Reward Points for helpful answers -
CREATE TABLE XYZ( A1 VARCHAR2(10));
Inserting value in table
SELECT * FROM XYZ;
A1
1
999
45
$
^
+
=
How get output only numeric values ?Hmm..
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>CREATE TABLE XYZ( A1 VARCHAR2(10));
Table created.
Elapsed: 00:00:00.07
satyaki>
satyaki>insert into XYZ values('&val');
Enter value for val: 1
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('1')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: 999
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('999')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: 45
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('45')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: !
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('!')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: @
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('@')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: $
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('$')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: #
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('#')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: ^
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('^')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: &
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('&')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: *
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('*')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: (
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('(')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: )
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values(')')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: -
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('-')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: +
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('+')
1 row created.
Elapsed: 00:00:00.00
satyaki>/
Enter value for val: =
old 1: insert into XYZ values('&val')
new 1: insert into XYZ values('=')
1 row created.
Elapsed: 00:00:00.00
satyaki>
satyaki>commit;
Commit complete.
Elapsed: 00:00:00.00
satyaki>
satyaki>
satyaki>select * from XYZ;
A1
1
999
45
$
^
A1
+
=
15 rows selected.
Elapsed: 00:00:00.01
satyaki>
satyaki>
satyaki>
satyaki>select * from XYZ
2 where regexp_like(A1,'[[:digit:]]');
A1
1
999
45
Elapsed: 00:00:00.00
satyaki>
satyaki>Regards.
Satyaki De. -
Transaction programming - Making screen fields 'output only'
Hi all,
I have a problem concerning a screen - it is so that the screen is used by several transactions - Create 'plan', Display 'plan' and Change 'plan'.
When it's called from the 'Display' transaction I want the screen to be output-only. So I wrote something like this:
MODULE modify_screen OUTPUT.
if sy-tcode = 'ZAF03'.
loop at screen.
if screen-name cp 'I_AFPL*'.
screen-input = '0'.
modify screen.
endif.
endloop.
endif.
ENDMODULE.
The problem is that this screen contains a tabstrip control. The subscreens on the pages of the tabstrip control contain table controls, and the table controls refer to some internal tables in the program.
All the fields which I want to make 'output only' are fields of internal tables beginning with 'I_AFPL' that's why the condition...
This works very well for the fields on the main screen, but not for the fields of the table controls on the tabstrip control... and I'm calling that module from the main screen and also from the subscreens of the 'pages' of the tabstrip control. In the debugger I see that the input is set to 0 but when the screen 'comes on screen' I can still do input in those fields...
Can anyone tell me what I'm doing wrong?
Thanks,Hi Ashish,
for table control to disable a column we use the cols property in the screen'..the tablecontrol-cols is set to zero to inactivate a column
Now assume the name of your table control is ZTABLECONT..double click on the screen painter on the table control..these 2 names must be the same....
if you need to disable columns of table control as a part of user action..like say click of a button..it can be entered in PAI by checking the sy-ucomm
data declaration:
data : cols like line of ZTABLECONT-cols.
Case sy-ucomm.
when 'PUSH'.
loop at ZTABLECONT-cols into cols.
if cols-screen-input = '1'.
cols-screen-input = '0'.
endif.
modify ZTABLECONT-cols from cols index sy-tabix.
endloop.
endcase.
This will disable all the columns
for a particular column do the following
For this imagine you have 5 columns
in the below code
index = 1 => column 1
index = 2 => column 2
index = 3 => column 3
index = 4 => column 4
index = 5 => column 5
in the below code , only column2 will be disabled....
so whicever column you want to disable ..just give the index
for multiple disabling..just write the code accordingly
LOOP AT ZTABLECONT-cols INTO cols WHERE index = 2.
IF cols-screen-input = '1'.
cols-screen-input = '0'.
ENDIF.
MODIFY ZTABLECONT-cols FROM cols INDEX sy-tabix.
ENDLOOP.
Pls check and revert....
Regards
Byju -
Make SAP standard PO fields output only using ME22N?
Is there a way to suppress the standard SAP fields (output only) when the user selects ME22N, that will still allow input to custom fields which have been added to EKPO? Has anyone had to do this before? Any suggestions would be greatly appreciated!
Sharon GermanHi Sharon,
FYI, there is probably a better forum for this question, this is more of a NetWeaver discussion forum.
If I read your question correctly, your desire is to have only certain fields (some custom) available when users execute the transaction ME22N. First, don't mess with ME22N, if you desire custom performance, create a new transaction as a copy of ME22N and make available only those standard and custom fields you want. Hope this helps... -
Making selection-screen fields output only
Hi all and thanks for the quick replies to my last question!
Here comes another one: Does anyone know how to display a parameter field in a selection screen as output only?
Thanks
Magnushi Magnus,
Check event AT SELECTION-SCREEN OUTPUT.
<b>PARAMETERS: P_MNTH RADIOBUTTON GROUP H1 USER-COMMAND ABC DEFAULT 'X'</b>
MODIF ID ABC.
<b>AT SELECTION-SCREEN OUTPUT.
IF P_DETA = 'X' OR P_STRT = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'ABC'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.</b>
Regards,
santosh
Message was edited by: Santosh Kumar P -
Reader X: Read Out Loud function not working; no voice output
I was using this function in the Reader 9.4 but the voice got the text a bit garbled at times, so I thought I'd try the latest version of the Reader and see if the passage was less garbled. Reader X has no voice output at all, even after setting and confirming accessability config. I messed with all 3 options of text buffering. I know the pdf file I'm viewing is ocr not image (at least Reader 9.4 could read it w/ a bit of it being garbled). Not sure what else to try; Text Aloud voices still work in that application.
I'm just now bumping into the problem again. I've got choices in "preferences - reading" of 3 AT&T voices and the default MS voice. I prefer the AT&T Voices that I got from text aloud. But they don't work even if I can point to one of them via preferences. But the default MS voice works I found out, eventaully. I guess I'm OK w/ just that voice available to me rather than "enabling protected start up" and reinstalling the AT&T voices (think that's what you suggest to do). BTW, "enabling protected start up" is already set so maybe this would not work. Also not sure I have the voices on disk so... can I even reinstall them?
Thanks for the help. -
[SOLVED]X11 video output only with ati open source drivers
Hi everyone,
my nvidia graphics card died recently and I replaced it with an ATI Radeon HD 4870, which in hindsight might have been a mistake.
I installed the catalyst driver at first, ran into some problems, finally decided to switch to the open source xf86-video-ati driver. Followed the ati wiki, but ended up with X11 video output only. Can't watch anything full screen, general performance is sluggish. The output of xvinfo is:
screen #0
no adaptors present
Here are the (hopefully) relevant parts of my xorg.conf:
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "dbe"
Load "record"
Load "glx"
Load "extmod"
Load "dri"
Load "drm"
EndSection
Section "Monitor"
#DisplaySize 470 300 # mm
Identifier "Monitor0"
VendorName "SAM"
ModelName "SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
Option "AGPMode" "8"
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
Option "ColorTiling" "on"
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
Option "AccelMethod" "EXA"
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RV770 [Radeon HD 4870]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Any ideas?
Last edited by Raisuli (2009-05-31 16:08:41)I think I had XV with this stuff: xf86-video-radeonhd-git-r6xx-r7xx and drm-radeon-module-git-r6xx-r7xx
Maybe you are looking for
-
What's wrong with my browsers?
When i first got my macbook the internet was going really slow but then i changed the dns server to 4.2.2.2 and sometimes change it to 4.2.2.1 and the internet got better but now my browsers are acting funny. One moment i'm surfing webpages with safa
-
Configure iTunes to support multiple users on one mac
I have a nice 2009 mac OSX that my two boys share. They have their own accounts on the computer and their own iTunes accounts. They want to be able to authorise the computer to play the stuff they buy in iTunes and synch it to their devices. Right no
-
i have an apple id and am trying to create an icloud account however my phone is not allowing me and saying that the number of free attempts have been exceeded even though this is my first attempt. how can i create an icloud account?
-
Airplay from Apple TV to a speaker?
Is it possible to stream with airplay from Apple TV to an Airplay speaker (like Libratone Live)? I wanna have the same sound in every room. Playing from my Apple TV.
-
10 new features to the oracle dataabse 10g
Hi all. Recently, I have been interivewed and I have been asked to list 10 new features of Oracle 10g. I told him about: 1) Here, stats have been collected automatically, in oracle 9i it was manual 2) AWR 3) RULE based optimizer is not there only in