No warning and no processing when content enrichment output is different from config

Hi all,
When
configuring the content enrichment, you provide the web service's outputted managed properties.
If the output contains less managed properties than configured, that's not a problem, but if it contains
more than configured, then the content enrichment fails without any warning at the crawl log, even if Error is configured to warning.
For example:
config.OutputProperties = "Author","Title"
and the web service is outputting two properties "Author" and "Title" - no problem.
But if you reconfigure config.OutputProperties = "Author", with no change to web service which still outputs "Author" and "Title", the result is that nothing is saved to "Author".
Amir

Hi Alexey,
I've switched to FailueMode = Error and it does write entries to the crawl logs, but only one and not quite a helpful one:
"The item failed due to an error occurring when sending or receiving data to the external content processing enrichment web service."
It's always the same message, no matter what the error was, a timeout or a parse error (which can be seen at ULS).
Amir

Similar Messages

  • I up dated to the ios 5 and lost a few things like photos and contacts but then went to a concert and took photos when i came home i restored from last back-up got my old pictures back but lost the new ones. Is there any way i can recover the new ones?

    i up dated to the ios 5 and lost a few things like photos and contacts but then went to a concert and took photos when i came home i restored from last back-up got my old pictures back but lost the new ones. Is there any way i can recover the new ones?

    Please please help me, if you know how.

  • HT6114 Air and iMac crash when trying to upgrade to Mavericks from Lion.

    Air and iMac crash when trying to upgrade to Mavericks from Lion.

    Make sure your Macs can run Mavericks >  OS X Mavericks: System Requirements
    The v10.9.2 link you posted from is not an upgrade. It's an update for Mavericks only.

  • I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would ve

    I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would very much like to download a Mac version, so please send my correct web link. By the way my s. number for Lightroom 5 up is [removed], and I also have s.number for 4 up and 3 full.

    The latest non-CC version of LR 5 is 5.7.1 and download links are available on the Adobe Updates page:
    http://www.adobe.com/downloads/updates/
    Both Mac and Win links are there.
    If you are asking for a LR 5 CC link, which wouldn't require a serial number, please be more clear about that.

  • Grey Screen and Spinning Circle When Trying to open a PDF from a website

    I tried to view a pdf from a website and a little window popped up. At the time i thought it was to save the pdf but i guess it was in fact asking me to find the adobe acrobat program. I quit out of it and now keep getting the grey screen and spinning circle when i try to download the pdf. How do I get it so i can open pdfs if find on websites? thanks!

    themercenary12 wrote:
    Found another topic and was helpful
    *Hi mercenary, Welcome (Back)* to Apple's Users Help Users Forums.
    It would be nice if you could explain or link to the helpful topic.
    Good Luck, JP

  • Delta and Init Process when R/3 is connected to multiple BW systems

    I have a scenarion where one R/3 system connected to 2 BW systems.
    In R/3 we plan to have a LO extractor feeding delta to 2 BW systems. I understand delta works fine as delta queue in RSA7 is target system specific.
    How are the initializations handled?
    What happens if delta in one of the BW system breaks and we need to re-Init?
    How would re-init from one BW system affect the delta/init in the other BW?

    Hey.  I'm assuming both BWs are pointing to the same system/client.  I do not have actual experience doing this as I would be very hesitant to have multiple BW systems trying to get delta data from the same source (especially with how logistics behaves).
    I know this isn't answering your true question, but could you connect BW system B to pulling the data from BW system A?  So something like:
    R/3 (logistics) => BW A 1st layer DSO
           BW A 1st layer DSO => BW A reporting DSOs/Cubes
           BW A 1st layer DSO => BW B reporting DSOs/Cubes
    In this way, reporting in BW systems A and B are from the same DSO stage.  This would help with any synch/data consistency issues.  If A or B reporting providers get corrupted, or whatever, either could be reloaded from BW A 1st layer DSO and everything is still in synch. 
    Not sure if this helps you or not, but thought I would offer it up as this would probably be my approach.
    Thanks

  • USB warning and ports not working after update to Snow Leopard from Tiger

    I've gone for hours through all kinds of forums without finding a proper answer, so here I am.
    This morning I've installed OS Snow Leopard 10.6.3 on my iMac, previously I had OS Tiger 10.4.11 running. Everything seemed fine until I restarted and then I started getting "USB drawing too much power" promps all over the place even though the only thing that's attached to the iMac is the keyboard and the mouse (they both work fine). The process went like this:
    The iMac is a 2.4 GHz Intel Core Duo from october 2007
    First I did an upgrade of my RAM, from 1GB to 2GB, that went ok.
    Then I runned the install dvd for Snow Leopard, I did not perform a clean install, just did it over my old data. After restart, everything worked but i got this USB warning message, one of them. At that point my usb's still worked, (even though the warning) I could print and scan. To get rid of the warning, i resetted the PRAM and SMC, as suggested everywhere. After doing so, the promps multiplied and my usb ports ceased working, except for the keyboard and the mouse attached to it.
    I've done the Apple Hardware Test, and it gives no malfunctions.
    Firewire works fine, Isight buildt-in camera and bluetooth too.
    I've tried all usb's and the keyboard will work in all of them, not like my printer and scanner which are completely ignored.
    USB power warning also appears at restart with no deviced connected (no keyboard and mouse, i've tried).
    I've also found in many forum entries  the possibility of a problem on the logic board, but since i've never had a problem with my imac until today i would not be sure about a hardware malfunction.
    The last thing i've found around that could be a clue is something about the kernel extensions, but that's complete chinese for me, I'm  a mac plug&play user and not too much of a mac expert.
    Does anybody have an idea about what could be going on? Should I perform a clean install of snow leopard? Would that solve the problem?
    Many thanks in advance to the community for the help, I'm quite lost since I've owned macs for the last 15 years and this is the first problem I have with one.

    I think it's serious, but if it didn't do it booted from Install Disc then Software is highly suspect.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    Did we get the warning in Safe Mode?

  • HT204053 I have one apple ID that my entire family has been using.  How do I create new apple ID's for each of us and move the appropriate content to each new ID from the original apple ID now that we all have our own devices?

    I have been using one apple ID for 4 family members.  Up until now it hasn't been a problem but now that we all have our own devices how do I create new apple ID's for each of us and them move the approprioate things from the original apple ID account to the new ones for each of us?

    stuartx4 wrote:
    Thanks Csound1, wish I have seperated everything from the beginning but when your kids are little and start buying music etc it just didn't seem like an issue.
    That has a familiar ring to it

  • Transfer(IDocs and TRFC) error when use infopackage to load data from R/3

    I create an infopackage to load data from R/3, when start immediately ,there is no data transfered. The return error is :
      transfer(IDocs and TRFC): Errors occurred
         request IDoc: Application document not posted
    Does anybody know how can correct this error?
    Thanks great.

    Hi Yimeng,
    Check in SM58 transaction code in R/3 and see if any LUWs are stuck there. If so you can execute them manually and complete the data load.
    regards,
    Sumit

  • Get date from Oracle when local time zone is different from Oracle time zon

    Hi!
    Local machine time zone= +2
    Oracle time zone= +1
    I set date to Oracle using java.sql.Date.
    From application I save date at 00:30 clock and send e.g. 28.06.2002, but in Oracle date is save as 27.06.2002 01:00 (hour=01 , I suppose that is because java.sql.Date hasn't time the Oracle set it time = time zone=+1) And when I get date from Oracle I get incorrect date. In SQL I don't use date masks. Maybe solution is to use java.sql.Timestamp object (when save date to Oracle) instead of java.sql.Date?
    But if I save date at e.g. 01:00 clock and send e.g. 28:06.2002 in Oracle, date is save as 28.06.2002 01:00 and when I read from Oracle I get correct date.
    Thank you.

    Hi!
    Local machine time zone= +2
    Oracle time zone= +1
    I set date to Oracle using java.sql.Date.
    From application I save date at 00:30 clock and send
    e.g. 28.06.2002, but in Oracle date is save as
    27.06.2002 01:00 (hour=01 , I suppose that is because
    java.sql.Date hasn't time the Oracle set it time =
    time zone=+1) Presumably you are using setTimestamp() to store the value. If you are explicitly using a varchar (string) then you will have to correct the timezone your self.
    And when I get date from Oracle I get
    incorrect date. In SQL I don't use date masks. Maybe
    solution is to use java.sql.Timestamp object (when
    save date to Oracle) instead of java.sql.Date?The method setDate/getDate store a 'date' which is not the same as a 'date and time' for which setTimestamp/getTimestamp are used.
    But if I save date at e.g. 01:00 clock and send e.g.
    28:06.2002 in Oracle, date is save as 28.06.2002
    01:00 and when I read from Oracle I get correct date.
    Thank you.

  • Tree item when-tree-node-selected fires differently from 6i to 10g.

    In forms 6i, when you keyboard navigate between tree nodes, the wtns trigger will fire. In 10g it does not. In 10g, it will fire if you press the tab key or mouse click on a node.
    Anyone know if this was done on purpose?
    I ran into this after finally trying my props.fmb in 10g. It works fine in 6i, but not in 10g
    copy of my form is here:
    http://www.tailboom.com/oracle.php
    Forms [32 Bit] Version 6.0.8.18.3 (Production) cleint server
    Forms [32 Bit] Version 10.1.2.0.2 (Production)
    I wrote most of the tree handling code for oracle apps APPTREE. This is the code that most if not all tree's in apps uses to build standard tree. So I have a pretty good understanding of the forms tree item. And know the wtns fired for web forms 6i on every node like 6i client server. This is very strange IMO.
    Thanks.
    --pat                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Oleg,
    thanks for the reference. Although the bug you identify deals with when-tree-node-activated, it is possible they fixed the when-tree-node-selected issue at the same time. With my test tree, i can currently duplicate both issues. I tried to download the patch, but it is only available for linux and unix. No windows patch. I don't have my linux env up and running to where I can test yet. So I can not confirm.
    --pat                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Error when sending report output to printer from Forms 10g

    Hi,
    I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
    terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
    Thanks,
    Anna
    PROCEDURE SEND_TO_PRINTER IS
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status VARCHAR2(50);
    rep_server system_variables.reports_server%type;
    alldone          exception;
    BEGIN
         select reports_server
         into rep_server
         from system_variables;
         if rep_server is null then
              msg_alert('Error getting the reports server name', 'I', FALSE);                
              raise alldone;
         end if;
         :ctrl.run_report_errors := 'N';                    
         repid := find_report_object('REP_OBJ1');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
         IF :ctrl.rg_print = 'P' THEN
              --Send the output to printer.
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
         ELSIF :ctrl.rg_print = 'R' THEN
              --Rich Text Format
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
         END IF;
         v_rep := RUN_REPORT_OBJECT(repid);
         rep_status := REPORT_OBJECT_STATUS(v_rep);
         WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
         LOOP
              rep_status := report_object_status(v_rep);
         END LOOP;
         IF rep_status = 'FINISHED' THEN
              null;
         ELSE
              :ctrl.run_report_errors := 'Y';
              msg_alert('Error when running report.' || rep_status, 'I', FALSE);           
         END IF;
    EXCEPTION
         when no_data_found then
              msg_alert('Error getting the reports server name', 'I', FALSE);      
         when alldone then
              null;     
    END;

    If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
    LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

  • Why is the map content on a iPhone different from OS X 10.9

    Hi,
    I have a question regarding iOS Maps on an iPhone and Maps included in OS X 10.9.
    I viewed on both devices exactly the same area.
    But the contents of the maps were different.
    On iOS Maps on the iPhone some main streets were missing. These streets were shown in Maps on OS X 10.9.
    Does Apple deliver different contents of maps to an iPhone and to OS X 10.9 ?
    Thanks.
    Regards
    lowlevelmission

    FIXED: there was a song that had a corrupted file

  • My mac is converting Word and Excel files into Pages and Numbers files when I click to open them (or download and open them) from an email. I do I get this to stop? It's really aggravating.

    My mac is converting Word and Excel files into Pages and Numbers files when I click to open them from an email. Downloading them and opening them doesn't help. How do I make this stop? I don't use iLife and don't want to; my clients are using Office and it's easier for me, except when I have to copy and paste everything they send me from an iLife file back to Word and Excel. Help!!! It's like Apple has become Microsoft, forcing us to use their apps.

    Do you have Word & Excel installed, if yes, navigate in the finder to an example of each, right click and select 'Get Info' scroll down to 'Open With' and select the appropriate program, check the box that says 'Change All'

  • Auto message determination for Freight Vendor when different from main ven

    Hi All,
    We have an issue with auotmatic output determination of a purchase order for a freight vendor, when the freight vendor is different from material vendor.
    We are creating a PO for raw-material for vendor 'A'. In the same PO we are maintaining freight condition (FRA1/FRB1/FRC1) and for that condition we are maintinaing a different vendor (e.g Fedex). Now when we save the PO we want the system to output the PO via FAX to both the Vendors (without any manual intervention).
    How can we achieve this?
    Thanks in Advance
    Venkat

    Hi Rajesh,
    Thanks for your reply.
    as per my understanding, you mean to say that freight vendor has to be maintained as CR partner to the material vendor. If my understanding is correct, then the issue is that my client is not interested in maintaining Freight vendor as partner to the Material Vendor. And one more point to be noted is, most of the Purchase Orders are created automatically by MRP (Reorder point planning) . Freight vendor is maintained in the contract. MRP uses the contract as source and creates release orders.
    is there any way to create new access sequence for message type NEU.so that system access the table KONV and field LIFNR to find the freight vendor.
    As of now i am unable to find this table and field name in the field catalog for creating new condition table.
    looking forward to hear from you soon.
    Regards
    Venkat

Maybe you are looking for