No waveforms when using Multi-camera clips!

I'm editing with multicam clips.
The audio is from separate WAV files, with 3 tracks.
When I cut some of the multiclip into a timeline, it does NOT display any waveforms.
I could've sworn last time I did this, it DID show waveforms.
Even when I display the waveform for the multiclip in the Source monitor, it shows NOTHING, even though audio does play.
I tried deleting all the waveform peak files / caches, then Pr rebuilt them, but still shows nothing.
Anyone have a solution??
The ONLY place the waveforms DO show is when viewing the actual Multicam source sequence in the timeline.
(Pr 7.2.1 on Mac 10.9.1)

I figured it out ...
You MUST set the panning of the tracks in the Multiclip sequence to Left/Right alternating (these are mono tracks), and set the stereo outputs (or "Direct Output Assignment") for all tracks ... e.g.,
Track 1 > Left 100 > 1+2
Track 2 > Right 100 > 1+2
Track 3 > Left 100 > 3+4
etc..
If you try to set the tracks as if they were truly Mono/Centered, then your destination sequence does not show waveforms correctly.
A bug, if you ask me...

Similar Messages

Using video filters on multi-cam clip

I was at an Apple Store on Saturday trying to get some instruction on using a video filter to brighten up some portions of a multi-cam timeline. We weren't able to do it. Does anyone know whether filters can or can't be used when using Multi-cam editing?

Do you have this checked on in preferences?
Depending on your format, the application will probably work much more efficiently with an I-frame codec, but it depends on the speed of your computer, drives, and the number of angles.

My Premier Pro freeze up when I use multi cam edit

Hi everyone,
I am using Mac Book Pro 2.3G i7 4 core, 16G RAM, NVIDIA GeForce GT 750M 2048 MB, OSX10.9.5, with Premier Pro 7.2.2. When I use multi cam feature to edit, screen have delay, and when I have more than 3 cam or if I press the buttons too fast, sometimes the program freeze up.
I am editing RAW footage from my Canon C100 AVCHD, 24f.
Questions:
1/ is there any setting on program that can improve the situation?
2/ if it is a hardware resouce issue, what Mac Pro I have to buy? I am thinking 32G RAM and 512G SSD, but a bit confused on the 4, 6, 8 core and clock speed. Should I get higher clock or more core? Or should I get basic CPU but upgrade the video card with more video RAM?
Any user with similar experience please give me some insight.

You're question is very general, more info please -
What version of Premiere?
Which Project Preset are you using?
What clip format are you Importing?
Computer specs?

When importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed.

when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.

here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs.

Collapse multi-camera clips?

Hello forum,
I've said before that I think FCPX multi-cam function is superior to anything else I've used (FCP7 and Premiere) - however, there is a feature of the old FCP7 that I REALLY miss, especially when finishing a show (after the multi-cam edit is done) - when doing sound mixing, titles/thirds, and color grading - "COLLAPSE MULTI-CAM CLIPS." This function disabled multi-cam editing, collapsing the multi-cam clip into a normal segment. When editing a multi-cam clip, the machine is pulling all of the angles in simultaneously during playback, and since I often edit on USB3 externals this is spotty when using 2 angles, and a train wreck of dropped frames when using 3 or more. I am happy to do the multi-cam edit using proxy media, but it would be great to be able to go back to original media, collapse the multi-cam clip, and be able to play-back in real-time without all the gglittching!
Does anyone out there have an obvious tip or solution to this issue?
Thanks!
Eric D - CoralVision

Use feedback to request it. Do it often using different names

Multi-cam clips and favourites

Have I understood this correctly? If I have a long clip that I want to break down into 'sub-clips' I can only do so by selecting part of the clip as a favourite. If I now want to make a part of those long clips into a multi-cam clip, one would assume that one would 'favourite' each of the clips and then multi-cam them. However when I do that, the multicam process ignores the 'favourite' attribute and synchronizes the entire clip. This can take a long time. As soon as its done one then has to discard 90% of the labouriously created multi-cam clip. Or is there another way of doing this?

rhjph wrote:
Have I understood this correctly? If I have a long clip that I want to break down into 'sub-clips' I can only do so by selecting part of the clip as a favourite. If I now want to make a part of those long clips into a multi-cam clip, one would assume that one would 'favourite' each of the clips and then multi-cam them. However when I do that, the multicam process ignores the 'favourite' attribute and synchronizes the entire clip. This can take a long time. As soon as its done one then has to discard 90% of the labouriously created multi-cam clip. Or is there another way of doing this?
That is not my experience. If you select "Show only Favorites" in the Event Browser, you will see only the parts marked as favorite.
Now select the ones you want and create a new multicam clip. It should just use the favorite, not the whole clip.
Actually, when I did that I used a particular keyword instead of marking as favorite, but I expect it should work as well. If not, then you can do as I did, and mark the portions of the clips you want with an appropriate keyword.

Multi-cam clip display in event viewer

I have been creating multi-cam clips for several projects. I am noticing with some multi-cam clips, it is defaulting to an audio track as the monitoring angle. When I double click on the clip and it appears in the timeline, I am able to change the monitoring angle to a video clip. However, it never updates in the event browser. Frequently before I edit, I will pore through clips and tag them. How do you update monitoring angle so it is also displayed in the event browser?
As you can see from this screen grab, the monitoring angle is set on a video clip but when I watch the clip in the event browser, there is no video

I figured it out. You can change what clip is showing the event browser by going under display and opening the angle viewer. You can then pick which track to display.

Color adjustment on Multi-cam clip in 10.1 not working and crash the app

In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
Anyone having similar issue?
Any solution?

In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
Anyone having similar issue?
Any solution?

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When using the camera, the odd time the screen will go purple and the phone would freeze?

I went to take a picture today, when I did the screen went purple and the phone froze for about 15 seconds. It worked fine for about 10 mins then I got another error "NO SIM CARD INSTALLED". Has anyone else had these issues, and what are  doing to sort them out!?

Thanks for the reply, I actually did that and the phone is working again but is that it or will it be a recurring issue? Plus the purple error when using the camera is very annoying, considering how much the phone is!

How to solve power error when using USB camera adapter in your camera

Hello Everyone,
First of all I wanna say reducing the output of the USB camera adapter from 100mA to 20mA just to save battery life is by far the most incredible adjustment in the history of @)#*$#%*($#!
I know most of us bought the USB Camera adapter so we can use it as a USB adapter for the Camera (saves us from taking the memory card on and off the camera) but sadly the "Ginues Apple" reduced it to 20mA which decreases the range of cameras and flash drives that will work with it. I use Gopro Hero 3+ black and everytime I plug it with the adapter to my ipad I keep on seeing this @#@$#@ power error. I didn't want to waste the expensive adapter so I tried to look for a micro sd card reader but I don't think 20mA readers still exist.
Now to solve this problem is very simple add a power source to help that 20mA up, most of the my friends bought a powered port hub but it's not my type because it's bulky, needs an outlet and not portable.
So I found a better solution on how you can add a power source and still be portable, the answer is power bank or portable charger.
Things you need:
Camera
USB camera adapter (Ginues Apple product)
Power bank (I'm using 8,400 mAh)
Dual USB Male to 5 Pin Mini USB Y Cable
Ipad
Procedure:
Camera --- 5 Pin Mini USB ------------------ USB camera adapter ---------- Ipad
'---------- Power Bank
Attach you camera to the 5 pin mini usb then the USB1 male to the female apple's USB camera adapter then to the Ipad. = this will show the power error.
Then attach the USB2 to the power bank/portable charger to power it up.
your welcome

yocto yotta wrote: How to charge iPad Air when using the camera connection kit?
No can do, Skippy!

Shutter locks when using the camera in AV mode.

EOS Rebel T3i - Shutter locks when using the camera in AV mode. It actually freezes up when in this mode...no it's not just allowing more light in through the shutter but rather locking in the open position. How can I resolve this? Thank you.

Does it do this in bright sunlight at the lowest f/number?
How do you know the shutter is locked open?
Does it do this on multiple lenses?
How long does the phenomenon last, and how do you stop it?
Do you end up with an image? Is it totally overexposed and motion blurred?
Positive it is not mirror lockup?
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Just downloaded photoshop cc on my pc, when using the camera raw filter noticed there are no descriptions for the sliders! Very difficult to edit photos. Already checked preferences.

Just downloaded photoshop cc on my pc, when using the camera raw filter noticed there are no descriptions for the sliders! Very difficult to edit photos. Already checked preferences. Anyone else have this issue?

They should be labeled....

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

HT1688 what is the HDR option when using the camera?

What is the HDR option when using the camera and why is it important to me?

The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

No waveforms when using Multi-camera clips!

Similar Messages

Maybe you are looking for