No way to get the dns service in OSX Lion Server
Hi all,
I installed OSX Lion and then the Server package.
But there is nowhere a "+" or such thing to add services like DNS or DHCP.
Anyone who can advice me?
Ok, if I install on the server the server admin tools it seems to be there
Similar Messages
-
How to get the ssl-certificate trusted on lion-server
I'm in the process of setting up lion server to create a small (international) research group collaborating on a project.
So I want to use the server to exchange data, use a common calendar, address-book etc.
To do so you need to get a SSL-certiifcate (unless you do everything on VPN).
So I selected the server in server.app (Hardware) and selected SSL certificate edit
created a certificate signing request that I exported and saved on my computer
I received a ssl.crt that I also saved and dragged into the window and replace the original certificate with the signed one
and also imported the certificate in to the keychain
All following the steps described in:
Managing iOS deviceswith OS X Lion Server by Arek Dryer
the book describes that the certiifcate should now be trusted and valid. However, I keep the message "This certificate was signed by an unkown authority"
So I somehow did something wrong.
Any suggestions what I should do?ok let me add some info in the hope I will get some guidance:
using the site http://www.sslshopper.com/ssl-checker.html
I was able to check on the status of the certificate:
The certificate is not trusted in all web browsers. You may need to install an Intermediate/chain certificate to link it to a trusted root certificate. Learn more about this error. The fastest way to fix this problem is to contact your SSL provider.
since it is a non-commercial server I used a 'free?' SSL-certificate provider that will charge you when you contact them, so you have to figure it out by yourselve
I guess I would be helped if there is a step by step manual how to install a root certificate -
I don't get the Mail service to work - tried everything!
Hey there,
I am frustrated. It's day 4 that I try to get the mail service on my machine running. Maybe someone has sme hints?
The setup:
- Mac Mini mid 2010
- OS X Mavericks and Server 3.0.1
- static IP (no Firewall or anything else, absolute in the wild)
- registered domain-name
- DNS A-Record: server.mydomain.org -> static IP
- DNS MX-Record: domain, *.domain -> server.mydomain.org; server.mydomain.org -> static IP of server
Server Configuration:
- Server.app shows everything is fine.
- ssh enabled for one user (works as a charme)
- Service-Data is on another partition than Mavericks
- Certificate: self-signed intermediate OD-Certificate (might be problematic?)
- users: one local user and one network-user (services-only)
- groups: workgroup, local network-group (added by the server.app itself)
Services:
- Websites: configured with 12 virtual-hosts some ssl (intermediate certificate) some on port 80, php enabled (All websites work perfect, no problems at all!)
- OpenDirectory: 1 Master on server.mydomain.org
- Mail:
-- Service-Bubble is green, says available under server.mydomain.org
-- Preferences: Mail available for mydomain.org (no other virtual domains)
-- authentification: hooked everything...(any method)
-- no relais
-- no MB-restriction for users
-- Filter: Virus and Junk
I can telnet on port 110 - feedback: dovecot ready!
I can telnet on port 995 - feedback: works... escape characeter is ' ^'.
I can telnet on port 143 - feedback: dovecot ready!
I can telnet on port 993 - feedback: works... escape characeter is ' ^'.
telnet on port 25 - unable to connect, operation timed out
telnet on port 465 - unable to connect, operation timed out
telnet on port 587 - -feedback works: 220 server.pscience.de ESMTP Postfix
Seems like having problem on the smtp standard ports... but why?
When I now try to connect a client with the server (adding an OS X server Account in the System Preferences) it recognizes the server and lists its services as expected. But when Iopen Mail, the new account shows the litlle lightning and says it can't connect.
By the way: Notes, Calendar, Reminders work fine!
Has anyone an Idea what it could be?
Do I need some additional DNS-stuff?
If you need some further informations, please let me know.If TCP port 25 isn't open, then SMTP services won't work. That's the port that all SMTP servers use to communicate amongst themselves. (Sure, you can change the port your SMTP server is listening on, but you'd also have to change the port processing on all of the other SMTP servers around — and if you did manage to implement that change everywhere, the local network folks would likely just block the new port for the same reasons they blocked the old port.)
If you have a public static IP address and have correct forward and reverse translations — host domain to IP address, and IP address to host domain name — then you don't need and very likely don't want to run your own DNS server.
More to help you learn how these pieces fit together and not something I'd expect you would need given you have a public static IP and public DNS here is a detailed DNS server configuration article for OS X Server; enable Show All Records and it applies to Server.app on 10.7 and later. If you have questions after reading that, I can certainly answer them and also update the article to try to reduce the confusion or answer the question.
Your host didn't have valid reverse DNS, so you'll want to get that cleared up, and you'll want to get the port blocks cleared, or work with the local network folks to set up a relay through one of the existing mail servers. -
I can't get the mail service to stop
Heya,
I am working on Leopard 10.5.4 server, and having a slight problem with mail. Essentially, I cannot get the mail service to stop. More specifically, I cannot get the SMTP service to stop. When I click on stop service in the Server Admin, SMTP says "Attempting to Stop", then goes right back to running. Problem is that the Stop Service Button never changes to Start Service, so IMAP and POP will not start. I am thinking about migrating my email boxes to a secondary Leopard Server that I have, and completely ripping out the mail piece, reinstalling, and migrating users back.... Unfortunately, I don't know how to migrate the users (I tried using mailbfr but, in the end, the mailboxes don't appear in the new server), and I don't know how to completely rip and reinstall the mail piece. As you can tell, by the rip and reinstall tactics that I want to resort to, I am a recovering Windows guy who is in way over his head.
Any help you can offer would be greatly appreciated.Okay, the serveradmin stop mail command worked. Unfortunately, I am
unable to authenticate when trying to login as from a client. IMAP
log shows:
Aug 25 13:58:18 eve imaps[6830]: executed
Aug 25 13:58:18 eve imaps[6830]: accepted connection
Aug 25 13:58:18 eve imaps[6830]: TLS server engine: cannot load CA data
Aug 25 13:58:21 eve imaps[6834]: executed
Aug 25 13:58:21 eve imaps[6834]: accepted connection
Aug 25 13:58:21 eve imaps[6834]: TLS server engine: cannot load CA data
Aug 25 13:58:30 eve imaps[6834]: imaps TLS negotiation failed: [10.1.3.5]
Aug 25 13:58:30 eve imaps[6834]: Fatal error: tlsstartservertls() failed
Aug 25 13:58:30 eve master[6813]: service imaps pid 6834 in BUSY
state: terminated abnormally
Aug 25 13:58:30 eve imap[6840]: executed
Aug 25 13:58:30 eve imap[6840]: accepted connection
Aug 25 13:58:30 eve imap[6840]: AOD: user opts: get attributes for
user: [email protected] failed with error:
-14479
Aug 25 13:58:30 eve imap[6840]: AOD: user options: lookup failed for:
[email protected] (-14479)
Aug 25 13:58:30 eve imap[6840]: AOD: authentication error: cannot find
user: [email protected] (0)
Aug 25 13:58:30 eve imap[6840]: badlogin: [10.1.3.5] CRAM-MD5
Aug 25 13:58:32 eve imaps[6830]: mystore: starting txn 2147483651
Aug 25 13:58:32 eve imaps[6830]: mystore: committing txn 2147483651
Aug 25 13:58:32 eve imaps[6830]: starttls: TLSv1 with cipher
DES-CBC3-SHA (168/168 bits new) no authentication
Aug 25 13:58:32 eve imaps[6830]: AOD: user opts: get attributes for
user: christophercrisp failed with error: -14479
Aug 25 13:58:32 eve imaps[6830]: AOD: user options: lookup failed for:
christophercrisp (-14479)
Aug 25 13:58:32 eve imaps[6830]: AOD: authentication error: cannot
find user: christophercrisp (0)
Aug 25 13:58:32 eve imaps[6830]: badlogin: [10.1.3.5] CRAM-MD5
Aug 25 13:58:33 eve imap[6840]: accepted connection
Aug 25 13:58:36 eve imaps[6830]: accepted connection
Aug 25 13:58:36 eve imaps[6830]: mydelete: starting txn 2147483652
Aug 25 13:58:36 eve imaps[6830]: mydelete: committing txn 2147483652
Aug 25 13:58:36 eve imaps[6830]: mystore: starting txn 2147483653
Aug 25 13:58:36 eve imaps[6830]: mystore: committing txn 2147483653
Aug 25 13:58:36 eve imaps[6830]: starttls: TLSv1 with cipher
DES-CBC3-SHA (168/168 bits new) no authentication
Honestly, I think that my problem at this point is OD and kerberos.
This machine is an OD Replica, but I cannot demote it. The same thing
happens as with mail... I try to make it stand alone, it goes through
the wizard, and then when it is done, goes right back to OD Replica,
and won't turn off... The OD Master doesn't see it as a valid replica
anymore. I also noticed that although kerberos is running on the OD
master, it is not running on this machine.
I know I am in the wrong forum for this, but any ideas? -
When we rent a show like The Good Wife while watching the show it freezes and the little circle goes around and around. The only way to get the program going again is to use the remote and go forward or backward. This happens throughout the whole show and it is impossible to watch. Can anyone help? We cannot watch movies or shows this way.
What is your actual speed (speedtest.net)?
Check istumbler.net or netstumbler to verify any interference
Make sure you are on your ISPs DNS (settings - network - configure DNS - automatic) -
Is there a way to get the voice memos from my iPhone on to my pc?
Is there a way to get the voice memos from my iPhone on to my pc?
See http://www.tech-recipes.com/rx/6403/iphone-transfer-voice-memos-from-iphone-to-c omputer/.
-
Hi All,
I need to obtain an image's attributes such as dimensions (height, width in pixels) without placing image in indesign document.
I have full path of the image (say abc.jpg is stored at c:\my pic\abc.jpg).
I have obtained the IDFile for this image, tried getting size using GetFileSize() which correctly return size in bytes.
Is there any way to get the height/width of image without importing it in the indesign document.
Please, give me some hints. I have spent quite a lot time digging in CHM. I have searched in FileUtils, IDFile API's but found no method which serves this purpose.
At this point I am clueless where to search next.
Any help will be appriciated.
Just a point to mention, I am able to get image height and width for an image in indesign doc though Its not my requirement.
Thnx,
D.You might be able to examine the contents of the PlaceGun after calling kImportAndLoadPlaceGunCmdBoss without actually placing the image in a document. Not sure, but would be worth looking at.
Otherwise you will probably have to write platform specific code, ideally with a generic platform-independant wrapper (see SDKSamples/paneltreeview/PlatformFileSystemIterator).
For the Mac, look at CGImageGetWidth() etc., not sure what the best option is for windows.
Perhaps Quicktime could provide you with a platform independant solution. -
I have photos on an old 2nd generation ipod nano, that have since been wiped from any other source.
I now have a shared photostream through icloud between all my other apple deivces (iphone, ipod, ipad, macbook air, apple tv), but I cant find a way to get the ipod nano photos onto the stream. The original photo files were detroyed with an old computer, that also had the itunes library to which the nano was linked.
The photos are the only items I want from the nano. Can anyone help?You need to copy the photos off of the Nano and onto your MacBook Air first.
The photos you synced to your iPod through iTunes are no longer in their full resolution, but instead are scaled down thumbnails of those photos. So if you do manage to get them off your iPod, they will be quite small in size compared to the original ones you lost.
In order to get them off of your iPod, you'll need the help of some sort of 3rd party software. Here is one option.
http://www.macroplant.com/podtopc/
B-rock -
Thanks to a wonderful geeksquad agent all my songs have been deleted from my ipod. They had to restore my computer so the ones I downloaded are no longer on my harddrive or in itunes. Is there a way to get the songs back after you do a sync and erase?
If they are on the iPod there are third-party programs that will transfer then to a computer. See:
Copy music from Ipod to new computer...: Apple Support Communities
If they ae not on either the iPOd or the computer they are gone. -
I still have my iPod nano 3rd generation, but my old computer crashed and I did not have itunes backed up. Is there a way to get the music from ipod to new computer library and then on to the new ipod ?
Save all the photos from your Droid into a folder on your computer.
Connect your device to your computer. On iTunes left Pane, select iPhone under 'Devices'; then on the right Pane, select PHOTO tab. Make sure Sync Photo box is checked, and "from" box selected the folder that has Droid's photos. Then click the SYNC or APPLY button on the lower right window. -
Seven of my albums from iPhoto 9.5.1 are no longer visible. The photos are still visible in iPhoto, but the albums are completely gone (another 10 albums are still visible). The missing albums are visible in iPhoto Library Manager (I downloaded the free version and when it loaded the library the missing albums were visible)
About 6 months ago 4 different albums disappeared and I assumed my kids had accidentally deleted them; however, they haven't been allowed to touch the computer since then, so I can't blame them this time! Last time I lost albums I spent hours re-creating them but I am hoping that there is an easier way of getting the metadata to function again - I know I could create a new library with iphoto Library Manager but I would have to buy the full version and can't afford to do that.
Not sure if it has anything to do with updating the application? (I updated recently and I'm not sure exactly when the albums disappeared.Use the rebuild function in iPhoto Library Manager. That does not require a purchase. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
Is there a way to get the correct order from the dependent types of a sche
Hi ,
I have a CT facing the following problem:
When trying to built a SQL script to create all the object types within a schema using the DBMS_METADATA packages.
Did insert in a table the names of the types that will be exported following a concrete order, next loop into the table and call the DBMS_METADATA package for each row.
These type are depedent between them, there are some type attributes calling other types and here the issue
First : try to generate the order by created column of dba_objects and when the generated SQL script is launched a lot of type appearing as incomplete state due to the order isn't correct.
Second : try to insert the table ordering by object_id colums of dba_tables view, it appears incomplete types too.
Currently want to insert the table using a recursive query with connect by against the dba_type_attrs starting with the rows when ATTR_TYPE_NAME is not null (the types that are called by other types), but this way has a issue dificult to resolve: the roots of hierarchy are the rows when ATTR_TYPE_NAME is not null and we've dependencies between roots nodes
The question is is there a way to get the correct order from the dependent types of a schema?
Platform: IBM SP AIX
DB version: 9.2.0.7
Any help will be appreciated .
Thanks in advance.The xxx_dependencies view should give you the dependencies betwee nthe various types. I would look at something along the lines of:
SELECT object_name, referenced_name
FROM (SELECT o.object_name, d.referenced_name
FROM user_objects o, user_dependencies d
WHERE o.object_name = d.name(+) and
o.object_type = d.type(+) and
d.referenced_type(+) = 'TYPE' and
o.object_type = 'TYPE')
START WITH referenced_name IS NULL
CONNECT BY PRIOR object_name = referenced_nameThe outer join between user_objects and user_dependencies is required to generate the names of types which are not dependent on other types, or do not have other types dependent on them.
HTH
John -
Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?
No. You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103501) -
Is there a way to get the history from find my iphone?
My iPhone disappeared from my car while it was valet parked at the airport. I did a find my phone when I realized I had left it in the car, and it showed the location to be valet parking lot. I assumed all was well, did a remote lock operation, and enjoyed the vacation. Is there any way to get the log from find my phone to show that it was where it was when I did the find operation?
SamNo.
-
<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com
Maybe you are looking for
-
It was recommended that I try Firefox as it's more user friendly to accessing a variety of our sites of interest that aren't being facilitated by Safari. But your info says that the latest Firefox isn't compatible with my iBook..is there an older ver
-
SAP (ECC) extractor to transfer data into Non SAP System
Hi Experts, Scenario : We had a requirement to decommission the existing SAP BW system and merge it into Non SAP BI system (say MSBI). Existing BW system getting data from standard extractor and populating till cubes. Now If this SAP BW system will b
-
Need info about showtree tags FeedURL & DownloadURL
We use showtree and see two tags we had some questions about... FeedURL What is this used for? We couldn't find documentation and it isn't used globally with every podcast on our iTunes U site. <LinkCollectionSet> <LinkCollection> <Name>Links</Name>
-
Materials for Dilog Programming
Hi Guys, I am looking for Dilog Programming materials to learn dilog programming. As i am new to this topic please suggest me which are all the books n materials needed to learn dilog programming. Regards, ABAPer
-
Reader 11 pdf page numbers printing too high
After I upgraded to Adobe Reader 11, I have started having issues with page numbers on my pdf forms printing too high on the page. Instead of printing at the bottom of the page, they jump up to wherever the text on the page stops. For instance, if th