No way to print report instance
When users view a report instance that was saved as an MS Excel spreadsheet the print option does not automatically appear in the toolbar. Is there a way to make the Standard options appear in the toolbar?
Hi Ray
Which product are you using?Also mention it's version.
Can you please explain in brief what have you done and what you are looking out for.
Thanks
Soni
Similar Messages
-
Any way to Print report generated as HTML
Hi All.
We are using FM WWW_HTML_FROM_LISTOBJECT to convert a list to HTML and show it in HTML container.
Now, is there a way to Print this document?
If I right-click and print, it uses the IE settings - i.e. if in the IE page setup, header and footer are there, the same will come up in printing. We don't want them to come. We want only SAP header/footer to come.
Any clues anyone?
Thanks in adv.We now support saving a response from the View Responses tab to PDF (that retains the form design shown on the Design tab). The PDF can be shared, archived or printed using Adobe Reader.
You can read more about it here: http://forums.adobe.com/thread/1085672
Please try it out and give us your feedback.
Randy -
Xmlpublisher & printing reports
Howdy,
Is there a way to print report without logging in to the xmlpublisher like you can do it in Oracle Reports?
For example, application executes the following url:
http://server:port/xmlpserver/catalog/test1/test1.xdo?_xpf=&_xpt=1&_xdo=user test1test1.xdo¶m1=... etc... and it directs me to login form. But I need to somehow avoid logging in(also LDAP is not an option). Is this possible?
Thanks in advanceHi Tim
If the format is
http://xdopf.us.oracle.com/xmlpserver/Guest/Executive/Salary%20Report/Salary%20Report.xdo
there is no issue with the guest login.
However when you change it to use parameters e.g
http://bynxdev.uk.bynx.com:15101/xmlpserver/servlet/xdo?_xpf=&_xpt=0&_xf=pdf&_xdo=%2FGuest%2FBYNX_FLEET%2FQuotations%2FQUOTATION_DETAILS%2FQUOTATION_DETAILS.xdo"ationModelId=420
you have a problem with a message
"Your session has expired, please click here to log in again."
I am testing using 5.6.2 and also on BI Publisher 10.1.3.2
Thanks -
Is there a way to print a Html-Report direktly in LabView?
I created a Html-Report wich includes a jpg-Picture.
Actually there is no way, in the Report Generation, to Print a Html file. I Would be
glad if you have a solution (sub-vi?) to Print a Html file directly in Labview.
Thanks
PH!LYou can drive IE with Lv through ActiveX: When you have creating an IE
ActiveX reference with Lv, you will be able to open your file and then print
them programmatically...
"PH!L" a écrit dans le message news:
[email protected]..
> I created a Html-Report wich includes a jpg-Picture.
> Actually there is no way, in the Report Generation, to Print a Html
> file. I Would be
> glad if you have a solution (sub-vi?) to Print a Html file directly in
> Labview.
> Thanks
> PH!L -
Is there any way to print the data inside the Notes field of MIR6 Report
Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.
-
Report Generation Toolkit V9.0.0 : Print Report.vi doesnt print
Hi,
i have migrated my Labview 8.5 Project with Report Generation Toolkit V1.1.2 to a Labview 2009 System with Report Generation Toolkit V9.0.0.
In this Project I use the Report Generation Toolkit for printing out a Standard Report with e few Tables and Graphs.
Now the VI Print Report.vi delivers the Error -41002 with the Text "Invalide Printer Name". I have, of course installed the propper Printer on the machine.
I don´t connect a string to the "Printer name" input of the VI, because i want to use the default printer.
In my oppinion, there´s a bug in the Print Report.vi: if you don´t wire the "Printer name" input, the vi should use the default printer, but in this case the vi connects the empty input string to the input of the method node it calls.
I fixed this bug, but the method node still returns the same error.
any ideas?
Thanks!
Solved!
Go to Solution.Thank you for the link!
For some reasons i can´t find this specific article in the knowledge base (my browser is always rerouted to the german version of ni.com, because i am in Austria). I tried to search with the exact title of this article, and the error message string, but no results...
I have also installed Labview 8.5 and the "old" Toolkits on my new computer in addition to Labview 2009 and the "new" Toolkits and tested my program in 8.5. Here i got an error mentioning the margins and i had to change the margin settings for printing out, then in worked.
After reading the article, i have applied the same changes for the margins in the 2009-version of my program and it works too!
Problem solved!
Thank you very much!
PS:
I first wrote, that there´s maybe a bug in the new version of the Print Report.vi, but i´ve compared it with the old version and it seems to be no bug, sorry!
After all I decided to stay with Labview 8.5 for now, because of another problem:
it´s not possible to "save for previous version" from LV2009 to LV8.5 directly.
Laview crashes, when a VI contains an event structure as i found out by searching through the "known issues", and i have a lot of VIs with event structures!
I have to have the possibility to save my Labview projects for 8.0 and 8.5. The only way is to save for 8.6 and then save from 8.6 to 8.5.
That´s nasty and time-consuming!
Maybe a future update will solve this problem (without producing new ones) -
Printing Excel Instance from InfoView using Excel 2003
Hi
I have problem with printing Excel instance within InfoView. We are using Active X as viewer - but when user schedules report in Excel and when it opens that instance - it opens in Web Excel viewer within InfoView. At that point there is no standard menu if user uses Office 2003 or actually Excel 2003 on its own machine so user cannot print instance. Can anybody help with this. If you try to open instance on machine that has Office 2007 there are no problems since instance gets open in full Excel.
ThanksWhat version of Crystal Reports are you using? Any service packs or hot fixes installed?
Can you open other xls files with 2007?
Have you ever exported to excel before?
I export to -excel (97-2003) data only- and open the files with Excel 2007 with no problems. Excel 2007 complains about the old format (xls) and wants to convert it to the new excel format. I alsways ignor it.
Maybe the 'garbage' you are seeing is because the layout of your crystal report is not working for the export. Is all the data there but you have extra cells and/or lines, or the data is pushed to the left? I find that I must have the fields packed tightly with no space between them and no space above or below the fields, or I get extra cells between and lines above or below them.
Most of my exports are detail lines with a single line header and columns are set to match the detail line. When exporting multiple lines where the fields do not line up exactly with the ones above them, I may use one or more empty text fields that matches the size of the fields above them to fill the empty space. Sort of like:
line 1:{field1.}{field2...}{field 3}
line 2:(text...}{text.....}{field 4)
And you may need to turn off 'can grow' on all fields as they may cause miss-alignment. All the data will be there when you export it, even what you can not see in Crystal. You will just need to format the cells in Excel to see it.
Debi (hi Don) -
Print report on network/local printer(plz help)
Plz Forms gurus, help me to solve this problem it's very very importante for me
We have at a lot application witch work in client/server mode using forms/Reports 6i.With these applications we haven't problem to print report on printer using RUN_PRODUCT.Now we want to migrate on Forms/Reports 9i.When we use Run_Report_Object to print report on network print, we are encountring problems, the following errors occurs:
REP-713: Printer name '\DT_C2_0_8102\LaserJet1100' is wrong in the parameter DESNAME.
LaserJet1100 is a network printer install on the machine witch have DT_C2_0_8102 in the network.
I would like to know, if there an other way for naming printer? Secondly, i would like to if i add a network printer on my machin and define it as my default printer. Am i obliged to define the parameter DESNAME in the call off RUN_REPORT_OBJECT. If someone have a sample code about how to print on printer, it'll be helpfull.
Plz forms gurus help me to solve my problem.
Thanks in advance.
TYAGDuplicate?
Print report on network/local printer -
Print report on network/local printer
Hi forms gurus,
I repost this topic because it's very important to me.We have at a lot application witch work in client/server mode using forms/Reports 6i.With these applications we haven't problem to print report on printer using RUN_PRODUCT.Now we want to migrate on Forms/Reports 9i.When we use Run_Report_Object to print report on network print, we are encountring problems, the following errors occurs:
REP-713: Printer name '\DT_C2_0_8102\LaserJet1100' is wrong in the parameter DESNAME.
LaserJet1100 is a network printer install on the machine witch have DT_C2_0_8102 in the network.
I would like to know, if there an other way for naming printer? Secondly, i would like to if i add a network printer on my machin and define it as my default printer. Am i obliged to define the parameter DESNAME in the call off RUN_REPORT_OBJECT. If someone have a sample code about how to print on printer, it'll be helpfull.
Plz forms gurus help me to solve my problem.
Thanks in advance.
TYAGHi Franck,
Excuse me to repost the same topic.I did it because it's very important to me to solve this problem.
I do what u said by change the value of DESNAME parameter in '\\DT_C2_0_8102\LaserJet1100' but the same error happen.
Here is the code the function i use to print report:
FUNCTION Run_Synchrone (P_robject VARCHAR2,P_rserver VARCHAR2,P_rformat VARCHAR2,P_rdestype NUMBER,P_rdesname VARCHAR2,P_rfilename VARCHAR2,P_rother BOOLEAN,P_rother_params VARCHAR2,P_rservlet VARCHAR2,P_message_out OUT VARCHAR2) RETURN BOOLEAN IS
V_rid REPORT_OBJECT;--Id du report object
--V_rmessage VARCHAR2(100) :='';
V_rmessage VARCHAR2(100) :=NULL;--valeur de retour run_report_object
--V_rstatus VARCHAR2(100) :='';
V_rstatus VARCHAR2(100) :=NULL;--Statuts de l'execution
--V_Jobid VARCHAR2(4000) :='';
V_Jobid VARCHAR2(4000) :=NULL;--id du job d'édition
--hidden_action VARCHAR2(2000) :='';
--V_other_Param VARCHAR2(4000) :='';
V_other_Param VARCHAR2(4000) :=NULL;--Autre parametre utililasteur
V_user_connect VARCHAR2(255):=GET_APPLICATION_PROPERTY(username)||'/'||GET_APPLICATION_PROPERTY(password)||'@'||GET_APPLICATION_PROPERTY(connect_string);--utilisateur connecté
v_report_url VARCHAR2(100);
V_Ret_Val BOOLEAN;--Valeur de retour de la fonctio,
BEGIN
V_rid:=FIND_REPORT_OBJECT(P_robject);
-- setting Reports runtime parameters
SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_FILENAME,P_rfilename);
SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_SERVER,P_rserver);
SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_DESTYPE,P_rdestype);
SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_DESNAME,P_rdesname);
SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_DESFORMAT,P_rformat);
--Autre parametre par defaut= userid
V_Other_Param:='userid='||V_user_connect;
--Test si autre paramètre applicatif
IF P_rOther THEN
V_Other_Param:=V_Other_Param||P_rother_params;
END IF;
SET_REPORT_OBJECT_PROPERTY(V_rid,REPORT_OTHER,V_Other_Param);
V_rmessage := RUN_REPORT_OBJECT(V_rid);
V_rstatus := REPORT_OBJECT_STATUS(V_rmessage);
--Test d'éxécution de l'état
IF V_rstatus='FINISHED' THEN--Aucune erreur
P_message_out:=P_rfilename||' édition terminée avec succès';
V_Ret_Val:=TRUE;
ELSE--Erreur quelconque.
--handle errors
P_message_out:=V_rstatus||': '||P_rfilename||' édition annulée...';
V_Ret_Val:=FALSE;
END IF;
RETURN(V_Ret_Val);
END;
And is how i call it:
V_Edition:=Web_Edition.Run_Synchrone ('RO_FM_DMP6',:GLOBAL.rserver,'PDF',PRINTER,'\\DT_C2_0_8102\LaserJet1100',P_File,TRUE,V_user_params,:GLOBAL.rservlet,V_Mess_Out);
What's the problem.Perhaps the problem reside in how i install the printer on the machin where i try to print.What steps must i follow to install it.
PLZ HELP! -
Hi I am working on PO Printing Report.There are mainly three section .1 is Header part which contains informaition like Bill to Address Ship to address,vendor address payment terms etc,middle part contais lots of information like header notes,supplier header note,note to vendor ,ship instruction,line notes ,if po cancelled then its informaition,if any line gets cancelled than the same information , all lines for this PO and many more.After this section we have footer like part which have total column and signature.The total and signature are dynamic.i.e should appean in last page only.The last page of report for a PO conatains a image Terms And Condtion.
Now problem is as there are lots of data in middle part ,It pushes the footer part to the next page.I need to break the page after certain height of table or certain no of records in table so as to have footer remain in each page.
Is there any way to fix no of records in middle part or calculate heigth of table at run time ...when it reaches to its max height ,I break the page.
Or I include the footer section in page footer but as its dynamic How can I get total column value and signature url dynamically.
Please suggest me how to achieve this.....Srini,
Thanks so much for your reply!!!
1. Ok, but how do I hide a whole page? I noticed the conditional formatting, but I want to "not print" a whole page when this page is a "Purchase Agreement".
2. I've checked the source - it's coming from POL.QUANTITY_TO_PRINT - POL is a view that is unpopulated. I assume it's populated at run-time. So now I am trying to track down where it's populated, but can't find that in report builder. The quantity is being taken into account, because I put a total at the bottom of the page, and that number matches price * pol.quantity_to_print. Very strange...
Finally, here's another question, if you don't mind:
3. When I print a purchase order that is set up as a blanket, as I mentioned before, I get my "Purchase Agreement" first, and then one (or more) pages per release. But the "Page Number" on each is "1" because each is a one-page PO. But my "total pages" is "3", so each page reads "Page 1 of 3". Any idea if there's a way around that?
Thanks again! Hoping you have some more insight! :)
Cheers!
Steve -
I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
Error 7 occurred at Get LV Class Default Value.vi
With the following text:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Complete call chain:
Get LV Class Default Value.vi
NI_report.lvclass:New Report.vi
print report.vi
EMS V3.0 streamline.vi
LabVIEW attempted to load the class at this path:
H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
"EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
Any help would be appreciated. Thanks.
Garrett HerningOk, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
Error:
An error has occurred. Expand the Details section for more information.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Method Name: Linker:Write Info To File -
Print Report using ASCII command through printer selection available on windows
Hi,
I'm using Labview 2009 to create a report using Report Generation Toolkit.
Creating a report is not the problem, the problem is I need to print the report manually by sending an ASCII Code.
I noticed that there are few example on send ASCII code command, but neither of them are related to printing.
The printer I use is Panasonic dot matrix printer KX-P1121E with USB port. (Fanfold type of paper)
I used "NI_report_lvclass: Print report.vi" from Report Generation before this to print my report, everything is okay and not receiving any error.
But I noticed that after finish printing, the paper will automatically feed out as if that VI (Print report.vi) is sending out "Form Feed" (FF) Command to the printer.
My application cannot use this method because I need to print a set of data in every minute. If the data only have 2 rows, then it will be a wasting a lot of paper if everytime finished printing paper feeding out. I want the printer to continue standby on the same paper after finished printing previous data. In other words, maybe just manually send "Line Feed or Carriage Return" to the printer.
So I have a few things need to be clarified step by step;
1. How can I send an ASCII Code to my printer? Do you have any example for this? link below is the character of ASCII Codes that can be use :http://webpages.charter.net/dperr/links/esc_p83.htm
2. Can I send a report created by report generation to be printed using this ASCII command method?
3. If my printer is setup by using windows (Meaning: Available on "Printer and Faxes" list), How can I configure the printer setup in sending the ASCII Code?
Really appreciated your reply
Thanks!Hi Zwired1,
Just to make sure I fully understand the situation - I am assuming since you say you are printing to two different printers that when you are using the Print Report.vi you are using the printer name string to specify which printer you would like to print on. And if the printer that you specify is not functioning it automatically prints on the other printer, is that correct?
From looking at the code in the Print Report.vi, it looks like if you specify a printer name in the input string, if there is a problem with that printer or if that printer is unavailable, the VI should not print anything, so please let me know if that is not the behavior you are seeing.
For your question about checking the health of printers, there is a VI in the report gen toolkit called Query Available Printers. You can find it if you open up the Print Report.vi and choose the Standard Report instance, the Query Available Printers.vi is on the block diagram of that VI. It will return the list of available printers and the default printer.
I hope that helps, -
Can not print report directly to printer.
Hi,
We are using Crystal Report Server for reporting in our project.
The version we are using is Crystal Report Server XI R2 and Crystal Report Server XI R2 SP 2.
Please kindly advice us on the following issues we faced:
- Can not print report directly to printer.
The print button on the Crystal Report Viewer prints the report to pdf and user have to click "Print" again in the pdf file. This is unusual and not convenient. As we have hundreds of reports to print, is there a way we can print the reporrt directly to printer?
- "Set to Null"
In the default interface of the Crystal Report View, there's is this "set to null" check box that we can not remove. Is there a way to do without it?
Thank you,
Kenny TewMorning Kenny,
The printer settings are in server management console. Additionally see what settings you have setup for the printer for the report in the server. If it is setup to use End User printer then check your End user machine settings and make sure the printer is setup as a default printer on his/her machine.
Please let us know how you get along with the issue.
As far as "Set to Null" I am not sure where it is set up. A screenshot of it might help understanding it better?
Many thanks
Regards
Jehanzeb
Edited by: Jehanzeb Navid on Oct 6, 2008 11:07 AM
Is this issue on all computers or only one computer?
I have just tested this on my colleague machine and it asks for default printer and not pdf however on mine I setup for pdf. -
Crystal Report Server XI recurring report instance is not viewable
I have scheduled a report to be run every morning, and each instance return status is "success". However, I encountered the following problem when I try to view instances of the report: There is a long time period of waiting (seems to be waiting for some kind of timeout), and then eventually the message: "A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server."
I also noticed that in event viewer (windows server 2003) I see many failure audits to login to the sql database, and the events contain the login used in my data source.
It's interesting to note, that when I run a single instance of the report "Now" there is no problem.
Some info about the report which may be relevant:
The report uses 2 formula fields to auto-parameterize 2 of the 5 parameters used by a subreport. The other 3 subreport parameters are set when scheduling the report.
The subreport uses a call into a stored procedure in a MS SQL server 2005 database to retrieve its records.
The 2 fields which are parameterized are datetime fields (StartTime, EndTime), and the main report is basically just a wrapper to only show the previous day.
JDBC data source to local Sql server instance.
Also, the crystal report server XI install uses the same sql server instance to store CMS data under a separate database.
I'm stumped on this.
Has anybody encountered this problem?
Is there a simpler way to auto-parameterize the report?
Why are the failure audits occurring when I view the instance of the report? Is this because the instance is setup to use RPT output format?
Are there logs I can look into aside from event viewer? I can't find anything that looks relevant under program files, but perhaps I missed something.
The failure audits would make more sense to me if it occurred with the other report instances, but some instances are shown correctly, and some just do this timeout thing.Hello AV,
please look for the log files here:
drive:install folder\businessobjectsenterprise11\logging
by default c:\program files\business objects\business objects enterprise 11\logging
Please make sure that tracing is switched on for the individual server.
Please find [online docu |http://help.sap.com/businessobject/product_guides/boexir2/en/xir2_crs_install_win_en.pdf]here
Falk -
Template is not attached to AP Check Printing report (XML Publisher)
Hi Guru,
I have implemented XML publisher version of AP check Print report and did all the setups. When we make the payment in payables it automatically submits check print report. The report is completed successfully, but no output.
When I check View details button noticed that template layout is not attached to the report.
Please do the needful.
Thank in Advance,
Venkat.Hi,
The following are the Instance details
OS : OEL5
Database: 11g
EBS : 11.5.10.2
I have completed all the setups for the report and I am able to see the template attached to the request for other reports where we submit them in SRS window.
But "AP check Print report" submits automatically through the form while making the payment against supplier in AP.
Thanks in Advance,
Venkat.
Maybe you are looking for
-
I just bought a new Ipod classic 160gb. I was able to load all of my songs onto it but I can't seem to get all of my playlists onto it. Can someone tell me how to fo it?
-
Hello, I have 2 disctinct servers. oracle 10gr2 in each one with the same linux red hat 4 version. the second server is just to TEST if the backup create with the first one, works fine. So the install in each server is exactlly the same... same files
-
Help required to display login failed custom messages?
Hi, Need Help, I have modified WPMessages.prop file(in IDM 6.1) to display custom login messages(Exp: Invalid user ID or Invalid password or Account locked), still I am unable to display these custom messages on user page,Whether do I need to change
-
Installing 9.2.0.4.0 on EL4 - Can't start netca, JAVA problem!!!!
Dear all, Please help with my Java problem. Thanks in advance. After successfully installed Oracle 9.2.0.4.0 on EL4, I tried to start netca but I received this error message: [oracle@localhost bin]$ ./netca: line 138: /u01/app/oracle/product/9.2.0.4.
-
I have a new Ipad and I hooked it up to my old ipod soundwall, and it works nicely sometimes, but sometimes the soundwall turns off for no reason. Any ideas as to why and how to fix it?