No way to scroll a partly typed SMS message on Nok...

One can scroll them after they are sent, etc, but once one gets past about 7 lines of typing, there is no way to review/edit the whole message. Finger scrolling does not work - one just gets the cut/copy menu popping up.
Is there a better SMS app which integrates fully into the phone?

Similar Messages

Is there any way i can transfer all my SMS messages from my 3GS to my 4 ?

is there any way i can transfer all my SMS messages from my 3GS to my 4 ?

Use iTunes to backup files from your old ipod first then transfer to the new iPod. Please
follow the steps in How to transfer your backup from one iOS device to a new device. By the way, if you don't have the iTunes, you can use this iPhone transfer program. It help you to transfer sms and contacts from iPhone.
Hope it helps.
You can use http://www.google.com to search more

[SOLVED] aterm and auto-scroll-down when typing

I've been using aterm for a while now, and before that urxvt.
What bothers me about aterm that I was very used to in urxvt was that, when you have scrolled up a bit, it doesn't jump to the bottom when you start typing.
Is there any way for aterm to behave like this?
Solved: I just found out about the scrollTtyOutput and scrollTtyKeypress options for .Xdefaults
Last edited by Gilneas (2007-08-01 20:18:21)

Hi jzola and welcome to the BlackBerry Support Community Forums!
Does this only occur when typing SMS messages or does it occur with BBM messages as well?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Texting; message does not scroll down while typing

When typing a txt, it only shows the first 2 lines; no auto scroll like my trusty Curve always did. In order to see what I typed I have to manually move the window up to see the rest of the message. Has anyone else experienced this...more importantly, can it be fixed?

Hi jzola and welcome to the BlackBerry Support Community Forums!
Does this only occur when typing SMS messages or does it occur with BBM messages as well?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How do I export or copy my SMS messages?

There's an Italian App which claims to be current (2011) Reviews of it are current (September 2011)
There is a trial version. I downloaded it but when run it tells me there are no SMS messages on my iPhone and that I must have iTunes sync with iPhone.
Why?
I did sync it. Does that mean iTunes keeps the SMS records too?
Anyway, the initial startup of that App fails because iTunes does not seem to have SMS records from myiPhone 4 or 3.
So, is there a way that I can download my SMS messages from my iPhone? And dosn't it seem like I should be able to since they are my messages and this is my iPhone?
thanks for the help.

That wouldn't be difficult.
look at the toturial: http://support.apple.com/kb/HT3529
Two steps to do that.
First, transfer your sms to you computer. You can using this iphone sms transfer and its guide.
Second, convert text file to pdf. Just use the adobe online pdf convert for simple text file.
So that you can export text messages from iPhone successfully!
Hope it can help you!

Copy and paste - can't copy parts of a SMS message

I'm getting really frustrated with the copy part of copy/paste within a SMS. In the SMS - If I tap on any number or word = nothing happens (if nothing is underlined), If I tap on a number underlined = I get the option to phone or skype?? If I double click = nothing happens, If I do a long press I the options to:COPY MESSAGE TEXTFORWARD MESSAGECOPY MESSAGE TO SIM CARDDELETE MESSAGEVIEW MESSAGE DE TAILSADD STAR If I want to copy some text (e.g. phone number, address, anything else) but not the whole SMS I cannot find a way to do it. Anyone else having this problem with SMS messages? Sometimes you need to extract info from the SMS to paste into an entry box on a website for example or to add to contacts etc. Can anyone help?

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Unfortunately, it's not possible to copy parts of a text message in the pre installed messaging application. But if you press a number, you can open it with the phone application and copy the number from the dialer. And if you want to copy an URL, you can open the page and copy it from the URL-field.
If you want parts from a text message, my best suggestion would be to copy the text into a notepad or similar and edit the text. Thereby, you can copy it with the text you want included.

SMS looses part of the message

Hi,
I've found some weird behaviour with certain SMS message on Iphone 3GS (OS 3.01).
If I receive a message like this:
Hello. 123456789, hello
The second hello gets lost. I see it when I receive SMS notification (I mean popup window), so the second hello is received.
However, when accessing the message from SMS button. I can only see: "Hello. 123456789," and that's all.
For those who are wondering, this message (phone_number, text) is part of the message I receive from my provider (Movistar, Spain) when someone calls me and my phone is off.
Any idea?

hi,Shalini.
Using Message directly, you can not achieve what you want easily.
Instead, i thought out one way, you can judge and check whether it can help you a little.
You don't use the Message manager directly, that means: don't display your message.
Now, you have one context attribute named "context_msg" which has type "String".
In addition, you have defined one Link-to-action UI element which is bound with the context attribute "context_msg".
When you get the message, use the following
message e001(ID) with <variable> into lw_msg.
or if you use Exception class
lw_msg = lo_exp->get_text( ).
Then you can set the context attribute "context_msg" with the "lw_msg".
Now, you can implement your action handler for the action of Link-to-action as you want, i.e. open another pop-up window.
I don't know whether it can fit your requirement or not.
Hope it can help you a little.
Best wishes.

Only receiving part of sms - Nokia 113

I just bought a Nokia 113, but when I am receving text messages, I only receive a part of the message. After some time, the rest do comes in, but this is not a way of working. If I receive a sms, I need to be able to receive the complete message. Thanks for helping me out. At the end of the sms, I always receive the message "part is missing"...

Lin123, which phone did you use before that, with that same SIM?

Is there *any* way to ping MIDlet using default SMS/call (j2me)

Hi,
I'm writing a server style MIDlet which is polling a bluetooth device, the nature of the server is such that the phone running the MIDlet (in my case, a Motorola L6) is dedicated, it needs do nothing other than run the server, it is assumed it will not be used for anything else. Specifically the only phone calls or SMS messages it receives should be specific ping requests to server. The server will run 24/7, and should be resistant to being suspended by incoming calls (I've noted this could be a problem in itself).
All I really want is for a 3rd party, without any special client software, to be able to ping the server (prompt it) to dispatch a set of text data to a pre-defined phone number via SMS (using WMA TextMessage).
Basically someone should be able to set up the server, and then, with any phone (with no specific client MIDlet installed), be able to call or SMS the server and get a response posted back (to a fixed number, not necessarily to originating phone number).
Does anyone know any way, no matter how hacky (needn't be pretty), to achieve this? You cannot receive SMS notifications on default port. An incoming call will call pauseApp which I could use - but not resume it, so server remains suspended. There are ways around having app suspended on receipt of call/SMS, but they involve never receiving the pauseApp notification, so I'm back to square one. I've wondered if I could check the free disk space on the MIDP profile (somehow) to 'detect' when it reduces in size, thus suggesting an SMS must have come in. Can a user send an SMS to a specific port with standard SMS-send interface (certainly can't see how myself, as no ':' character available). Can you hack the phone to re-route incoming SMS messages to something other than the default port?
Is there a specific phone that might do this (I just need a phone supporting j2me bluetooth API, needn't be motorola L6)?.
I think this can be done with Symbian (of which I know very little), and ultimately I might need to start programming with that, but I'd really prefer to continue using j2me..
Any ideas would be greatly appreciated, I've spent a fair bit of time trolling for answers with only limited success.
Cheers
Edited by: bbloff on Oct 10, 2007 8:50 PM

The tunnel default gateway is needed to let the internal firewall and router handle the routing for all decrypted IPsec packets. Today, after a Cisco IOS? EasyVPN Client connects to a Cisco IOS EasyVPN Server, there is no simple way for the client to send the tunnel traffic to the internal corporate network (other than to have the entire routing table on the IPsec gateway). In this type of implementation, the Cisco IOS routers use the default gateway to route all packets toward the Internet that do not have a more specific route. The tunnel default gateway gives customers the flexibility to control how they handle IPsec tunneled traffic

Is ther any way to prevent implicit data typing in the block scriptd

System build /autocode implicitly define the type of variables that are not defined by the user in a block scripts based on the value assigned to them.
As an example, if there is no type definition for the variable A in a block script, depending which of the following lines appears first in the block script the type of variable will be defined differently in the autocoded model:
A = 1; -> RT_INTEGER A;
A = 1.0;-> RT_FLOAT A;
This behavior can cause undesirable result in certain situations.
Is there any way to flag the variables in the block scripts with no type definition during analyze / autocode? or alternatively, disable the implicit type definition such that any variable without explicit type definition in the block scripts will result to an error during analyze / autocode.
Thanks

Hi Farshid,
It is the default behavior to pick up the type from the first assignment. However one can explicitly type variables as seen in the BlockScript user guide page 2-7. For instance, one can declare
Inputs: U;
Outputs: Y;
Parameters: (UBrk, YBrk);
Float U, Y(;
Float UBrk(, YBrk(Y.size,;
This forces all the parameters and local variables to Float.
Let me know if this helps, there is not a way to turn off implicit typing, just a way to explicitly type.
Richard
Richard
Field Sales Engineer, New Jersey
National Instruments

What is the best way to enlarge a part of a photo in lightroom? How much cn you enlarge it and get

what is the best way to enlarge a part of a photo in lightroom? How much cn you enlarge it and get an acceptable result?

The way I would do it would be to crop the image so that it only displays what you want, then export that image and specify the dimensions. You will have to experiment with different export sizes to determine what would be acceptable for your situation. You might be more forgiving or more demanding than anyone who would venture to answer that question. That's the nice part about digital photography; you can experiment to your heart's content until you get the result you are looking for.

Anyone know of a way to backup SMS messages for FREE on a Mac?

Anyone know of a good program to extract SMS messages from the iphone, or the backup file located in /Library/Application Support/MobileSync/Backup on a mac? Something that is able to put it into a .txt file or anything that is legible?
And most importantly, that is firmware 3.0 friendly, works on an iphone 3GS (obviously but just incase) and is free? I saw some online but you have to pay for them and some aren't even iPhone OS 3.0 compatible. Only 2.0
Or does anyone know of a way to do this yourself by navigating the files in the backup folder?
Lastly... anyone know of a way to put old SMS's back on an iPhone if you decide to do a new restore instead of one from a backup? Many thanks!

Thanks neuroanatomist. That was really helpful, but when I went in and looked in my SMS folder, I opened it under notepad and it was all garbled and hard to read. It didn't look like in my iphone of indicating conversations between me and another person. I could see my conversations, but they where all mixed in with numbers and weird characters I've never seen before. You wouldn't happen to know of another program out there that can put it perhaps like in a word doc. or even excel sheet? Something that's just organized. Thanks.
Anyone else care to help me out with some mac community friendly advice? Thanks!

Major Preview App annoyance - no way to scroll with mouse

Apple apparently thinks everyone uses their trackpad. Not.
There's now no way to scroll down with a mouse as with ML. I have to take my hand off it and use the trackpad to scroll down. And since Logitech hasn't released new software, and the old doesn't play well with Mavericks (I had to uninstall it and use the default drivers in OS X), I'm stuck at least for now.
Hopefully, I can revert to the old version from a backup.

have you tried https://bugreport.apple.com
This was posted on macrumours and is incredibly accurate to my case:
Running Mavericks, if I open a single-page PDF document in Preview and size the window to 822+ pixels tall (800+ viewable document area) then the vertical scroll bar disappears (I have it set to “always” show) and the normal two-finger scrolling does not work in the up-and-down direction.
I can still “flick” two fingers to scroll, and if I scroll at a diagonal angle it will work, but it won’t scroll normally up and down. Resizing the window to less than 822 pixels tall solves the problem, making the scroll bar reappear and the trackpad scroll gesture works properly.
Multi-page PDFs, as well as non-PDF files, scroll just fine. It is only single-page PDFs, and only when the window shows at least 800 vertical pixels of the document, that Preview stops vertical scrolling.

Can't I use my wireless mouse and trackpad in different ways when scrolling?

Since I'm a Chinese user, I prefer describing my question in my mother language...I will translate it...
在系统偏好设置里，倒是可以分别设置鼠标和触控板，但是当我打开触控板的“自然滚动”，同时取消鼠标的“滚动或导航时，使内容按手指方向移动”，之后，鼠标恢复原来的滚动方式，郁闷的使触控板的滚动方式也跟着变化了⋯⋯
但这时打开触控板的设置，“自然滚动”依然是选中的啊⋯⋯
如果这时关闭“自然滚动”，再重新开启，鼠标设置界面的“滚动或导航时，使内容按手指方向移动”虽然是为选中的，但使用时滚动方向又变成反向了⋯⋯
各位有遇到么⋯⋯我觉得是个BUG吧，期待修复⋯⋯
我的鼠标是雷柏的6900,蓝牙无线
本子是新的MBA 11‘
Well, there is two setting items in system preference for "mouse" and "trackpad", and there do have the checkbox for "Move content in the direction of finger movement when scrolling or navigating" and for "Scroll direction: natural". I checked the "Natural Scroll"---- if I may call it this way ---- option and unchecked the same option in mouse setting wishing to use my mouse and trackpad in different ways...
However, it turned out to be a confusing phenomenon like I can only use my mouse and trackpad in the way "Natural Scroll" or the way it used to be. If I double click the checkbox of "Move content in the direction of finger movement when scrolling or navigating" to refresh my settings, both my mouse and trackpad will turn into the way it used to be in scrolling while if I double click on the "Natural Scroll" checkbox, both of them will turn into the new way.
At the same time, eventhrough the setting of my mouse has been changed by the changing of trackpad setting, the checkbox in "mouse" is still unchecked and that's where makes it seems like a BUG....
So, is there anybody who meets the same problem? The reason I want to use this two device in different ways is I just don't like to use mouse in the new way, it's unconfortable for me.
And, I use a new MacBook Air 11' and a wireless mouse called Rapoo 6900
Here comes the link of my wireless mouse.
http://en.rapoo.com/ProOverview.aspx?PID=3550

jhawk,
I can see the appeal of your desired setup, but is the limitation the inability to "Pair" the mouse/keyboard to more than one computer at a time? (Practically, that makes sense, you don't want to be blindly moving both cursors around at the same time, since you can only see one screen at a time)
You CAN operate bluetooth devices on Windows without pairing-you just need to locate the device each time before using:
http://www.oreillynet.com/pub/a/wireless/2003/09/18/winxpunwired.html
So maybe you can pair the Mac version, and just search out the device each time you switch over? (but then you would have to "unpair" it off the Mac too) Maybe you need to write two scripts for each platform: pair/unpair devices.
Sounds like it would be easier to buy two wireless keyboards and mice :P
What you really want is a utility like this:
http://www.abyssoft.com/software/teleport/
(its only Mac to Mac though, unfortunately)
Good luck!

Palm tx: how to make five way button scroll down a page at a time

i knew how to do this once, but have forgotten: on my palm tx, how do i make the five way button scroll down a page at a time?
thank you,
kj
Post relates to: Palm TX

Yes, you'll simply need to open up your docs-to-go program and once you've accessed the program, select the document your needing to view. After selecting the document using the stylus tap in the upper left corner of the screen and you'll see a drop down menu populate (from the File option), Next select preferences and lastly, place a check mark next to the page scroll on Five-Way device.
Post relates to: Treo 800w (Sprint)

No way to scroll a partly typed SMS message on Nok...

Similar Messages

Maybe you are looking for