No weather or stocks update

Hello. I have two iPhones that I purchased at the same time. Because of crashing apps issues last week, I completed a complete reset of both phones back to the original state. Then I installed minimal apps, and installed 2.02 today. Both phones show wi-fi. If I shut off wi-fi, EDGE picks up weather and stock updates. Otherwise only one phone works on wifi?

iPad is carried much higher then the iPhone (like a waist pocket, unlike the iPad which is in your hands mostly) ... after a certain altitude, there is no real need for "weather" ... where, your iPhone is on your waist - a place where some weather changes could be useful to know about...

Similar Messages

  • Weather and Stocks widgets are not appearing in my notification center

    I just updated my iPad 2 to iOS 5 and the weather and stock widgets are not appearing in my notification center. I tried to look for them under the notificatns tab in the settings app to activate them (which I read in an unofficial article) but they're not there. Can anyone please help?

    Tgara wrote:
    There are plenty of apps in the App Store that can do what you want, and many are free. 
    There are not currently (or at least I haven't found any) any weather apps that will appear in the Notifications Center the way the included app does on the iPhone. It's not a big deal for me but I can understand the people who want it.

  • HTC Weather App not updating (diff issue-sync issue)

    Okay so let start off by saying I have the 2.2 Froyo Software.
    If you add a widget, theres is a widget called "sync all"; whether it is a new one from 2.2 I dont know but lets move on.  I have that widget on one of my screens.  Periodically I will hit that sync button because I refuse to have it enabled all the time for it to update on its own.
    So we should all know that by sync'ing it updates: Backup Contacts/Twitter/Weather/News/Stocks and maybe more.
    However after hitting that sync button, minutes on end my temperature is the same; my weather is not updated.
    If you were to go into Settings>Accounts and Sync>scroll down to Weather and click it; it will say that the weather was in fact updated but the home screen widget is not updating.
    Even if you were to manually update it via the settings/accounts and sync/weather and then click weather update, the status will say it has been updated but the homescreen widget will not budge.
    I called HTC after talking to Verizon and HTC also had noted that it too wasnt updating for him either.
    I am a user that has everything disabled. But while I await for replies, I will enable everything and start checking things off one by one to see which thing it needs to function.
    I dont have Background Data Enabled
    I turn off Bluetooth-Wifi-and all locations.
    OH and PS: if I go into the weather app and choose the update from that screen; YES it will change temperatures and weather but not by performing a sync.
    Again HTC noted the same issue; thought it was a software glitch but last time I called them on this issue was well over a month + ago
    Has anyone else noted the same thing?  Thanks

    the background data needs to be checked in order for the weather to update once you perform a sync; everything else you can leave unchecked

  • Trouble with opening a 2nd page of Safari and getting Wx or Stock updates?

    My ipod touch says it is connected to internet through my home wifi router and all the items under Settings>wifi seem correct. My windows laptop works correctly on the same router. But when I open Safari on the Touch, the first page of the web site opens but I can not then get beyond that page. That is, if I click on a topic in Yahoo for example, I get the message "Safari can not open page, not connected to the internet". Similarly, I can not get my weather updated or the Stocks updated. I get the message "Update Failed". My Touch works on other networks. Any suggestions?
    Thanks

    I don't recommend using Safari to check your connection. You have some other tools that will let you know what the problem is.
    Tap Settings > WiFi > and then tap the blue > next to your network name. When your touch is connected to your network and your router has issued an IP address, you will see an IP address for the device, a subnet mask address, a router address, and a DNS address or two.
    Most likely you are going to see a device IP of 169.x.x.x, and incomplete subnet mask address and nothing else.
    The most common things to cause this are:
    1. WEP encryption
    2. Old router firmware
    3. You need to reboot your router
    All are fixable. See this article for general troubleshooting help with WiFi: http://support.apple.com/kb/TS1398

  • Open stock updation not performed with MB1C

    Dear Frieds,
    While performing open stock updation with MB1C T-Code, an error message will appeared as " Material xxxx does not exist in warehouse xxxx". Kindly give the solution.
    Regards,
    Gopi

    Hi,
    Go to MM01, select warehouse - 1 & 2 views, specify the warehouse nos & extend the warehouse views for this material. Once the above is done, you can proceed to use MB1C.
    Regards,
    Vivek

  • POS DM: Stock updates in SAP Retail

    Hi!
    We are implementing SAP Retail (ERP 6.0 EHP4 stack 3), SAP PI (Netweaver PI 7.1 SP 8) and SAP BW (NetWeaver 7.0 ehp1 stack 4, incl BI content 704, SP 3 ) for a client. Their POS system is a 3rd party system, i.e. not SAP POS, and it does not contain any stock information.
    This issue concerns stock updates in SAP Retail using POS DM:
    On the busiest day of year, my client has 347 000 POS transactions in total from all stores, and in one year they have 30 mill POS transactions. My client requires that SAP will provide them with near-realtime information on stock availability, as this is an important way of providing good customer service. The stock information should be available in SAP Enterprise Portal and SAP Retail Store, as well as standard SAP gui transaction. In addition, the webshop (external system) should have as accurate information about stock as possible, at least it should be updated once every 30 minutes.
    My client also has a requirement to be able to create purchase orders during office hours (store opening hours), based on MRP runs. This means they must have as accurate stock levels as possible for running MRP. Stock levels are also used in ATP checks, when deciding whether to pick customer orders from store inventory/stock or to create purchase requisitions.
    All these requirements have led us to believe that the best way to solve this, is alternative A:
    - to update stock continuously during office hours, using WPUBON to create material documents, one for each POS transaction. Sales and tenders will be updated in SAP Retail using WPUUMS and WPUTAB.
    Some challenges this will create:
    a)     It will create 347 000 WPUBONs on the busiest day of year, all within 10-12 open hours.
    b)     If we have same amount of material docs and FI docs, they will use 30% of the available 8 digits within their number ranges per year.
    c)     The idocs will fail if there are article locks simultaneously. (However, this can be handled by updating products only at night time (using batch jobs) and using batch job to handle failed idocs)
    Edited by: Øystein Emhjellen on Jan 4, 2010 2:15 PM

    Alternative B:
    - we have considered to use WPUUMS and WPUTAB, updating stock levels only once a day. The solution we then must use for taking into account actual sales data is described in SAP Note 1088886 - Using the interface for online stock queries. If we choose this, we need to check during the day for each article any sales, to reduce stock in reporting/screens, ATP checks and in MRP runs. We must also create a program to check for articles sold before sending stock data to webshop (external system). (As we do not know which articles have been sold, we must create our own version of RFC - /POSDW/SALES_QUERY_RFC, to enable that the article number does not have to be specified. Rather, the article numbers (and sold quantities) have to be returned to ERP based on what was actually sold.)
    We consider this alternative more risky, due to the need for changing behaviour of standard programs for MRP and ATP check. It will also create a number of RFC calls between SAP ECC and SAP BW.
    My questions on this issue are:
    i)     Will alternative A be preferrable, if hardware requirements are handled?
    ii)     Do you see any additional challenges related to alternative A?
    iii)     Will alternative B be adviceable, concerning the program changes/enhancements involved?
    iv)     Are there standard implementations of SAP ECC, that includes the use of RFC - /POSDW/SALES_QUERY_RFC. I.e. standard programs in SAP ECC that uses the information from this RFC call?
    Thanks for any advice !
    Best regards,
    Oeystein Emhjellen

  • I am in need of a weather and stock widget, similiar to the ones on the iphone 4s, that allow you to display current stocks and weather in the notification window but i need it for the ipad2.

    the iphone 4s came with a weather and a stock widget.  these could be configured in notifications to CONSTANTLY display stock prices and the days weather whenever you pulled down the notification window.  the ipad2 doesn't have these programs and i have spend a small fortune and time looking for this same feature.  does anyone out there know off a weather and stock program that will let you program stocks into the notification window and then stream the stocks and prices acrossthe screen continously when you open the notification window.  Also does anyone know of a weather program that will display the days current conditions ALL THE TIME, not just when the wind picks up or it snows.
    the ipad2 doesn't have these built in programs and i can't find similiar ones in the app store.
    Thanks for your help.
    [email protected]

    I have this question too. Have you had any replies?

  • Weather and stocks not in sync on iPhone and Mac

    Dear community,
    I had my Mac OSX 10.10 in sync with my old iPhone 4S (iOS 8) regarding the inbuilt weather and stocks app.
    Now I've got a new iPhone 6, and the sync connection is lost. No new weather locations or stocks are synced from Mac to iPhone or vice versa.
    Of course I am logged in on both devices with the same iCloud account. Any idea?
    Thanks!

    Dear community,
    I had my Mac OSX 10.10 in sync with my old iPhone 4S (iOS 8) regarding the inbuilt weather and stocks app.
    Now I've got a new iPhone 6, and the sync connection is lost. No new weather locations or stocks are synced from Mac to iPhone or vice versa.
    Of course I am logged in on both devices with the same iCloud account. Any idea?
    Thanks!

  • Weather and Stocks Widgets Offline, wifi proxy the cause?

    While connected to a wifi network with a proxy server, weather and stocks in the notification center indicate offline. 
    The network has a proxy auto-config which is set up for the network.  The weather and stock apps have no issue while connected to wifi using the proxy and cellular disabled.
    As soon as I turn off wifi with cellular enabled, the weather and stock widgets work properly.
    Anyone else seeing this type of issue?

    I'm having the same issue. What is weird though is that it's only happening since I upgraded to the iPhone 5. It worked fine on my 4.

  • I upgraded to IOS 7 (iPad 2) and I didn't get the Weather or Stock apps. How can I get them?, I upgraded to IOS 7 (iPad 2) and I didn't get the Weather or Stock apps. How can I get them?

    I upgraded to IOS 7 (iPad 2) and I didn't get the Weather or Stock apps. How can I get them?, I upgraded to IOS 7 (iPad 2) and I didn't get the Weather or Stock apps. How can I get them?

    The apps load on the iPhone only. G to the App Store and search for alternatives. There are many there.

  • 3rd Party with stock update

    Hi all,
    I am trying to setup proces to track SO through process of purchase.
    Much like 3rd party sales processing w. shipping notification with difference that I need to receive goods on stock not on SO consumption and afterwards to ship it away.
    I tried to set up automatic Pur.Request out of Sales Order but was unable to do this without account assignment, and thus always ending up creating PO for consumption and skiping stock.
    Can somebody give me some pointers on how should I setup this.

    Yes, I am aware that in 3rd party scenario there is no stock update cos goods are shipped directly to customer from vendor.
    Mine problem is that I have to make process of tracking SO through Purchasing with stock update and I am stuck with creating Pur.Requisition out of SO with account assignment which then triggering GR on SO consumption.
    Is there a way to create Pur.Requisition automaticaly out of SO without account assignment. So that I can procure to stock and still have update document flow in SO.
    Or maybe this is wrong approach and I should take another one.

  • Last stock update Date Tab not updating in ICH

    Hi Team
    I observed that in ICH screen Last stock update Tab is not going to update every time while demand and stock information coming from ECC to ICH.
    There is no stock inconsistency. All stock tab information are updating correctly in ICH compare to ECC system.
    Only this Last stock update tab Date are not updating.
    What is the reason behind this?
    Could you please help me to resolve this?
    Regards
    Virendra Kumar
    09769396038

    Hi Virendra
    It is a bug, please report to SAP and get fix
    which version you are using and what is the patch level?
    1341691 should be helpful check out
    Best Regards
    Vinod

  • Material return(sales return)-default stock updation

    Daer Gurus
    While material return(sales return), default stock updation is possible through Transfer posting or some other transcation...pls help me to give a Soln
    Regards
    Ragesh

    If a customer returns goods , you must first determine whether or not a returns delivery exists for the returns in the Sales (SD-SLS) component. You then enter the return with or without a returns delivery.
    Since returns from the customer are usually examined, the quantity returned is first posted to blocked stock returns. As is the case with goods receipt blocked stock, blocked stock returns are neither valuated nor do they count as unrestricted-use stock.
    If an examination proves that the returned quantity should be taken over into unrestricted-use stock, you enter the transfer to unrestricted-use stock in a second step. It is at that time that the valuation of the goods receipt occurs.
    If a returns delivery exists, the return should be posted in the Sales (SD-SLS) component, not in the Inventory Management component.
    Depending on how Customizing for Sales is configured (the movement type is configured in the step Define Schedule Line Category), the delivery is posted to the following stock:
    Blocked stock returns (non-valuated, not unrestricted-use) (movement type 651)
    Unrestricted-use stock (movement type 653)
    Quality inspection stock (movement type 655)
    Blocked stock (movement type 657)
    If the given quantity is posted to blocked stock returns first, you can make a manual goods movement posting in the Inventory Management component to transfer the quantity to valuated stock.
    If blocked stock returns are to be transferred into your company's own stock, you enter the transfer as a transfer posting. Choose movement type 453 (to unrestricted-use stock), 457 (to stock in quality inspection stock), or 459 (to blocked stock.
    If helps rewards points.
    Regards
    TAJUDDIN

  • HT3576 can you display weather and stocks on ipad like iphone

    can you display weather and stocks on ipad like iphone

    If you mean in the notification center then no.  The iPad does not have default Weather or Stock Apps that can interact with the Notification center.
    You can however download 3rd party Apps that can show you stock and weather in them.

  • GR BEFORE INTIAL STOCK UPDATE

    HI sap guru's
    in my client want GO LIVE ,but we have 300 pending GR ,can i do GR before stock updated(all ready available stok in client)
    HAVE ANY AFFECT IN FINANCE

    Hi Pooja,
    When you enter the Gr before the initial stock, there will enteries debit/credit in few accounts like GR/IR, Vendor account...right...and that also with the posting date...
    On the other hand if you make your GR, if the stock is improper in qty, QI reference then wht will you do???
    If the qty you entered in the system doesnot match with the initial stock then there will mess created in the system...then you may need to create few more docs to cancel it....
    Thirdly, if you show the GR...then abt the qty which goes for production..from where you'll issue..???
    Hope it makes clear...
    Regards
    Priyanka.P
    AWARD IF HELPFULL

Maybe you are looking for