No WebDynpro iView Template found in content administrator menu (NW 7.1)

Dear Sir/Madam,
I tried to integrate a sample application in my local portal, but I did not found the webdynpro iview template to accomplish this in the content adminstrator menu.
I found the webdynpro iview template for webdynpro ABAP, but not the on for webdynpro java.
Is this a problem of my installation or are there some prerequisites which I miss?
Many thanks in advance for any input on this.
I am using Netweaver 7.1.
Wolfgang Rothmayer.

Thanks for the quick answer.
My problem is, that I do have the New->iView Menu but then I miss the
Web Dynpro Java application entry
Find below the screen I do have:
<<snip>>
Please wait
Your request is being processed
iView Wizard
Step 1: Template Selection
This wizard guides you through the steps required to create a portal iView based on an existing template. The template list reflects the contents of the cache, and may need refreshing.
Refresh
Choose Template: *
BEx Web Application iView
Crystal Enterprise Report
JDBC Stored Procedure iView
Proxy-to-Portlet iView (WSRP)
Related Services iView
SAP BSP iView
SAP IAC iView
SAP MiniApp iView
SAP RFC iView
SAP Transaction iView
SAP Web Dynpro for ABAP iView
Service Map iView
URL iView
Web Service iView
Workset Map iView
XML iView
Cancel Back Next > Finish
<<end snip>>
What is wrong?
Thanks again.
Regards,
Wolfgang.

Similar Messages

How to call Java WebDynpro iViews from Portal (Portal Content Directory)

Hello everybody,
I am trying to call a Java WebDynpro iView, which was created within the Enterprise Portal and is stored in the portal content directory (pcd).
I have created an HTML-iView in VC, where I have put in the pcd-link into the default-url field (pcd:portal_content/com.sap.pct/every_user/com.sap.pct.cprxrpm.ppmdc/com.sap.pct.cprxrpm.iviews/com.sap.pct.cprxrpm.iviews_cprojects/com.sap.pct.cprxrpm.cpr_projects). This iView is calling the cProjects WebDynpro Application. But after I run my model, the portal page is running and running, but nothing happens.
I did the same with transactional iView, which was also created in the Portal before. I have also created an HTML-iView in VC, where I have put in the pcd-link into the default-url field (pcd:portal_content/IBU_content/SAP_for_Service_Provider/com.sap.pct.issp.ps.professional_services/com.sap.pct.issp.prs.iviews/com.sap.pct.issp.prs.display_sd). This is working fine!
What I also tried is to call another VC-Model with an HTML-iView. Here I have put-in into the default-url field the pcd-location of my VC-model (pcd:portal_content/IBU_content/SAP_for_Service_Provider/com.sap.pct.issp.vcmodels/com.myComp.myProduct.1DM9.CreateEngagement/com.myComp.myProduct.iviews/com.myComp.myProduct.1G62.Cprojects_neu). This is also running fine!
Now I do not understand the difference between this three objects. There are all iViews within the portal but the WebDynpro iView is not callable through a HTML-iView in VC.
Could you help me in this case? Your help is very appreciated!
Thank you in advance.
Best regards,
Aylin.

Hi Marcel,
when you mean the preview within the portal, yes, it is working fine.
URL is not the way to solve my problem. I am working with IDES-Systems. This is our Demo System within SAP. I have to build my VC-Model in a Master IDES-System which will be transported than into the other IDES-Systems. The URL of the WD is not the same in the other systems. It is changing depending on the several Sysems. But the pcd-location is in all systems the same. Therefore I have to specify the pcd-location of the application.
Is there a restriction with WD within VC?
If we can do some kind of a netmeeting, I can show you my problem exactly.
Thank you.
Regards,
Aylin.

Using a master template found in FCP for menu in STUDIO PRO 4?

Can you use one of the fcp master templates in DVD studio pro?
I like one of the light templates that I find in fcp and I would like to use it as a template for my dvd menu. Can I do that? thanks
I have FCP 6 and DVD studio 4.

Sure...design your menu in FCP then export it out as 720x480 and use that in DVDSP.

Missing iView templates from creation wizard

I have just installed a test instance of EP based on Netweaver 7.3. When I try to create an SAP transaction iView, the template does not show up in the creation wizard. The template exists in the system, and seems to work in the preview window. How can I get the template to show up in the iView creation wizard?

Hi,
Check standard iView templates exists under Content Administration -> Portal Content-> Templates->iView templates. also check Permissions .
Please refer this forum:[ iView Wizard - Template Selection not getting Displayed|Iview Wizard - Template Selection not getting Displayed;
Hope this helps!!
Regards
Vijay

ABAP webdynpro iView issue with Internet explorer

Greetings,
We are trying to integrate ABAP webdynpro with portal using the standard SAP webdynpro iView template, we are able to successfully integrate and display on portal pages.
However if we are using IE version 7.0 browser we do not have any issues, but when we try to use IE version 6.0 the webdynpro portal pages does not display any content. A workaround was to open up the IE settings and change the setting for Navigate sub-frames across different domains to 'enable' from 'disable'.
This fixed the issue.
Also we came across information that we can change the setting to force the portal to use the css from the ABAP backend by changing the iView property 'Supply portal stylesheet' from 'Yes' to 'No'. Does this affect the portal behavior in rendering content in MS IE.
Please let us know if there are any other methods to overcome this issue, as this will affect many of our users.
iview isolation is of type 'URL'
page isolation is set to 'Embedded'
Portal page used is default framework type not webdynpro type
thanks,
Sudhir

Greetings,
This issue was fixed.
I found this blog helpfull
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdabap/general%2btechnical%2baspects
thanks,
Sudhir
Edited by: Sudhir Sidd on Jul 23, 2008 5:42 AM

Removing jsessionid parameter from url of Webdynpro iview

Hi All,
While i create a Webdynpro iview from SAP Webdynpro iview template, the generated url gets appended with the parameter jsessionid as shown.
http://server:port/webdynpro/dispatcher/local/session/New_app;jsessionid=(J2EE14778100)ID1600385450DB11689045888563713719End
I don't want this parameter to be appended and exposed in the url of the ivew. Is there any way i can hide/remove this parameter from the generated url?
Regards,
Vijay.K

Hi All,
I found that, the Webdynpro template which is an App-Integrator appends the parameter jsessionid to the generated URL. So, i tried changing some properties of the system regarding session, but i couldn't remove this parameter from URL.
I also found that, custom Application integrators can also be developed. So, is it possible to get rid of the jsessionid parameter by developing a custom App-Integrator for Webdynpro application?
Please help me in this regard.
Regards,
Vijay.K

Help option for webdynpro Iview.

Hi all,
Need to implement help option for webdynpro iview.
i found it can be implemented through Par file http://help.sap.com/saphelp_erp2004/helpdata/en/50/bb174082fe1961e10000000a155106/frameset.htm
i want this to be implemented for webdynpro iview.
thanks in advance.
Regards,
Srikanth.

Hi all,
Need to implement help option for webdynpro iview.
i found it can be implemented through Par file http://help.sap.com/saphelp_erp2004/helpdata/en/50/bb174082fe1961e10000000a155106/frameset.htm
i want this to be implemented for webdynpro iview.
thanks in advance.
Regards,
Srikanth.

Webdynpro content administrator

Hi All,
I am able to access Webdynpro content administrator & webdynpro content through the 50000 port only. but we have IIS sitting infront of it on port 80. when i try to access the webdynpro content or content administrator through http://host/<webdynrocontent admin content URL> it gives page connot be displayed page. is there anyway to access webdynpro content OR webdynpro content adminstrator the with no port specified in the URL.

First thank you very much for help. Yes. we found that IIS is not allowing /webdynpro and blocking this URL's. we got it working after configuring the IIS.
From this it is clear that all webdynpro Iviews are URL iviews? Am i correct in understanding this?

Visibility of SAP content (webdynpro iviews) in SAP GUI for windows

Hi
Is it possible to view SAP created webdynpro for ABAP content (previously only used through portal) through the standard GUI for Windows.
Even if it is a transaction that kicks off a url, that links to this webdynpro iView, but the backend needs to be used.
C

Hi,
You don't need a portal to use WD ABAP applications. The WD ABAP application will be launched in a standard browser window.
Regards,
Pierre

Content Alignment in webdynpro iView based on user language

Hi,
We have a webdynpro application which has a search screen
(Arabic as well as English), based on the user language setting in Portal UME, the respective language text with options are displayed.
This webdynpro application runs on same WAS where Portal is running.
When we test this application standalone like typing the URL of the webdynpro application, it shows english text with Left to right aligned content in browser for user X with Language as EN.
When we test this application standalone like typing the URL of the webdynpro application, it shows arabic text with Right to Left aligned content in browser for user Y with Language as Arabic.It works fine when it is stand alone (when we directly run the webdynpro).
We created a WebDynpro iView in Portal, and we tested with user Y (whose language is set to Arabic), issue is text is properly displayed in Arabic, but the content alignment is left to right, which should be Right to Left.
Please let me know your solution/thought to the above mentioned issue/problem.
Thanks
Senthil

Hi,
The webdynpro application works fine (alignment and content is fine)when i access it directly.
When i create a webdynpro iView and run it inside portal it is not working fine (alignment is LTR instead of RTL)
I went through the SAP help <a href="http://help.sap.com/saphelp_nw04/helpdata/en/6e/8aae409567942ae10000000a155106/frameset.htm">RTL Alignment</a>and tried creating new themes and created a new desktop and assigned it to the user. It is still the same with LTR alignment.
The issue is, why it is not working inside PRT, when it works fine inside WebDynpro Runtime.
Thanks
Senthil

Iview created in Content Administration not displayed in Portal

Hi,
I have created a Bex Query as iview in Content Administration existing SAP Standard folders.
I have assigned this to a workset and then to a Role.
I dont see the iview in the Portal. Are there any additional steps to see the iview in portal.
Version: Bex 7.10
Thank you,
Vasu

Hi Vasu,
Once you created Bex Query iview : then check whether you Iview properly assigned to workset/role or not..
Open workst object - check your iview, if not assigned then assign iview as delta link
Open role object - check your workset, if not assigned then assign workset as delta link
Then Make your Role as entry point - open role object, check Entry point radio button- select 'yes' then must save it.
Then got user administrator -> search your role and assign to your userid. Now you can refresh, you will see the tab as your role in the portal.
Hope it helps
Regards
Arun

Jco destiantions are with greyed status in webdynpro content administrator

Hi All
In webdynpro content administrator of BI System all the jco destinations are displatyed with greyed status,even i tried to create new destination with any name the message comes use another destination,it is already used in sld.the connection to sld is working fine.i am using the user as j2ee_admin.
kindly help me out.
Regards
Pranav

Hi Pranav
If the SLD is working fine then you need to check the below thing :-
1. Check the SLD Data Supplier in the Visual Administrator and update the correct information and test it.
2. Update Host and service file for server in the server system for jco destinations visibility.
Refer to [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?quicklink=index&overridelayout=true]
Hope it will helps.
Best Regards, Arun Jaiswal

Unable to start WebDynpro Content Administrator.....

Hello All,
I am trying access webDynpro Content Administrator from ContentAdmin-> webDynpro but I am getting message
Missing Permissiones
You do not have the needed permissions to start the Web Dynpro Content Administrator.
Please contact your System Administrator.
I have assigned "Administrator , Super Admin & Content Admin" roles to administrator but still i am not able to view the contents of content admin.
Pls help !
awaiting reply !
thanks,
Smita

Hello
You need the LCR roles. Assign the roles in the Portal:
LcrAdministrator
LcrUser
If you cant find the roles, you need to perform the postinstallation for SLD. It is pretty easy. Or you can import this:
[role]
rid=LcrClassWriter
action=sap.com_com.sap.lcr.LcrClassWriter
[role]
rid=LcrAdministrator
action=sap.com_com.sap.lcr.LcrAdministrator
group=SAP_SLD_ADMINISTRATOR
[role]
rid=LcrInstanceWriterLD
action=sap.com_com.sap.lcr.LcrInstanceWriterLD
group=SAP_SLD_DEVELOPER;SAP_SLD_CONFIGURATOR
[role]
rid=LcrUser
action=sap.com_com.sap.lcr.LcrUser
user=J2EE_ADMIN
group=SAP_SLD_GUEST
[role]
rid=LcrInstanceWriterCR
action=sap.com_com.sap.lcr.LcrInstanceWriterCR
[role]
rid=LcrSupport
action=sap.com_com.sap.lcr.LcrSupport
group=SAP_SLD_SUPPORT
[role]
rid=LcrInstanceWriterAll
action=sap.com_com.sap.lcr.LcrInstanceWriterAll
group=SAP_SLD_ORGANIZER
[role]
rid=LcrInstanceWriterNR
action=sap.com_com.sap.lcr.LcrInstanceWriterNR
group=SAP_SLD_CONFIGURATOR
Best Regards
Kristoffer Engh

Content administration - webdynpro

Hi,
am new to Web dynpro development. so i created a simple helloworld application and am trying to integrate in SAP enterprise portals.. in the documentation, it is mentioned to create a system if the host where the WD applciatin resides is a different machine and specify it as SAP_local_system if it resides on the same system where EP is running.I chose sap_local_system.
my queries are:
a) in this scenarion, is SSO really need to be implemented, as it is running on the same WAS as SAP EP?
b)what can we do in content administration --> webdynpro tab at all?
c) what does SLD has to do with WD applications?
please help me.
regards

Hi Yogi,
As far as I know, you only need SSO and SLD for WD apps if they're on different servers and if you're fetching data from R/3 or from some other system. For example, take a look at the pre-requisites to deploying a WD sample application from a tutorial list the following (this WD application is connecting to R/3):
Prerequisites
You have made sure that the relevant SAP basis system, which you will be accessing
remotely to retrieve the flight data, is currently available and contains flight data.
You have made sure that the SAP J2EE Engine has been launched.
To do this, refer to Starting and Stopping the SAP J2EE Engine .
You have checked that the configuration settings for the J2EE server and for the SDM
server are entered correctly in the Developer Studio.
To check the server settings, choose the menu path Window ¨ Preferences ¨ SAP
J2EE Engine.
The connection parameters for the used SLD are defined in the J2EE Visual
Administrator.
The following resource may come in handy:
http://help.sap.com/saphelp_nw04/helpdata/en/c7/071940a65ec442e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7e/c82c42be6fde2ce10000000a1550b0/frameset.htm

WebDynpro Content Administration

Hi,
My requirement is that I have to give WebDynpro Content Administration Page access to one of my developer. But I dont want him to Get Content/System/User Admin Role. I cleared all his roles and attached his ID to Administrator GROUP. It gave him access to Content/System/User Admin Roles. Can I just give him priviliges to access only the Page of WebDynpro Content Administration.
Any work around option for this.
Regards,
Murali.

Hi Praveen,
Thanks for ur Inputs.
I have created a Role WD_DEV and attached the standard workset. For this Role, I went to the Permissions and gave
Administrator, SAP_JAVA_NWADMIN_CENTRAL, SAP_JAVA_NWADMIN_LOCAL, super_admin_role, user_admin_role and the userID all Full Control access.
My user is abel to logon and see this role. But when he access this page it says ' You do not have the needed permissions to start the Web Dynpro Content Administrator.
Please contact your System Administrator. '
I didnt create any group. Instead attached all permissions straight away to this role and attached this role to my user.
Did I go wrong anywhere ?
Regards,
Murali.

No WebDynpro iView Template found in content administrator menu (NW 7.1)

Similar Messages

Maybe you are looking for