No Weblogic server adapter in OEPE (12.1.3.1)

Hi there,
I've just download the latest version of OEPE (Luna) and realized that there is not Weblogic adapter included in the OEPE.
Clicking on the "Download additional server adapters" also does not give me any Weblogic adapter option for download.
Any idea? (I used to downloaded the bundled version with Coherence and Weblogic included but the bundled version is still not out. Does anybody know when the bundled version will be released?)
Thanks

Which version of WebLogic Server are you trying to configure in OEPE?
If you go to the Servers view and right-click to select New, do you see an Oracle category in the New Servers view? Under the Oracle category there should be numerous WebLogic versions listed.
Thanks,
Greg

Similar Messages

Weblogic server adapter for eclipse 3.5 ?

I am trying to get a hold of Weblogic server adapter for eclipse 3.5 with WL 10 and java 1.5
I tried to download oracle server adapter for WL for eclipse 3.5 and it asks for java 1.6 to be present.
Where can I get a hold of WL server adapter for eclipse ?
I can go back to previous versions of eclipse if necessary but I have to have WL 10 server adapter working with Java 1.5.
I would appreciate any help any kindly soul can provide. I am tearing my hair out trying to setup integrated development
thanks

below links can be helpful:
http://www.oracle.com/technology/software/products/oepe/oepe_11113.html
http://www.oracle.com/technology/software/products/oepe/index.html
Edited by: sandeep_singh on Mar 17, 2010 11:14 PM

I can't download the Weblogic server adapter for Eclipse Ganymede (3.4.0)

In Eclipse Ganymede (3.4.0) when I create a new server I cant download the Weblogic server adapter.
Previously when creating a new server in eclipse I could select "Download additional server adapters" and it would download the adapter from a BEA site. There no longer appears to be a BEA site in the list it tries. The other usual suspects are available.
Would like to move to Ganymede but can't until this issue is resolved. Any help with a workaround or additional info would be greatly appreciated.
Edited by ujik at 06/26/2008 5:20 AM

http://bugzilla.bea.com/show_bug.cgi?id=297
http://bugzilla.bea.com/show_bug.cgi?id=300

How to add "Weblogic Server Adapter" from "download additional server adapter" list.

"Weblogic Server Adapter" is not shown in "download additional server adapter" list in STS 3.6. How to add It.

George, What deployment do you have this associated with?
- D.J.

WLST : Error connecting to a remote Weblogic server instance from OEPE 3.7

Attempting a to run a weblogic script connecting to a remote weblogic server instance (10.3.5), which is generating the following exception in OEPE 3.7.2 -
username = 'weblogic'
password = 'weblogic6'
url='t3://xxx.xxx.com:7001'
connect(username,password,url)
Connecting to t3://xxx.xxx.com:7001 with userid weblogic ...
This Exception occurred at Fri Feb 01 13:20:54 MST 2013.
Error occured while performing connect : Error connecting to the server : Failed to generate class for weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl_1035_WLStub
Use dumpStack() to view the full stacktrace :
java.lang.AssertionError: Failed to generate class for weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl_1035_WLStubconnect
Problem invoking WLST - Traceback (innermost last):
File "C:\Users\hughese\workspace\12c_wlst\wlst\heapsize.py", line 13, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 648, in raiseWLSTException
WLSTException: Error occured while performing connect : Error connecting to the server : Failed to generate class for weblogic.management.mbeanservers.compatibility.internal.MBeanHomeImpl_1035_WLStub
Use dumpStack() to view the full stacktrace
Connecting to the local weblogic server instance (t3://localhost:7001) works okay.
From the command prompt (wlst.cmd) I'm able to connect to the remote weblogic server instance -
wls:/offline> connect('weblogic','xxxxx','t3:xxx.xxx.com:7001') ;
Connecting to t3://xxx.xxx.com:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'IDMDomain'.
I've compared the CLASSPATHs between OEPE and the command prompt.
Any assistance would be greatly appreciated.
Edited by: 950635 on Feb 1, 2013 7:47 PM

Hi,
1)To get mysql JDBC driver to work on my Linux system, i had to add the classpath for the driver to the .bashrc:
CLASSPATH=./:home/<user>/java/mm.mysql-2.0.6/:home/<user>/java
Note that I execute the java program as the user <user> (and .bashrc is the config. file of this <user>...). Perhaps you must do this as well for the Oracle driver on your client machine. I don't know if your client machine is UNIX/LINUX or WINDOWS. It should only be clear that the CLASSPATH is set in the config. file of the user under which the java program runs and that this user has the permission to access the files.
There are no differences between accessing the database locally than accessing it by a network connection. The only thing that matters are that the connection parameters are right and that the network works properly.
2) are you sure that the table tname (case sensitivity?) exits?
Marc

Silent install of Oracle WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE

Hi, I'm trying to deploy the Oracle WebLogic Server 11R1 (10.3.6) on multiple computers. So I created a silent.xml file to use in my silent installation. The xml file appears to have the correct syntax. But when I launch the command: oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32.exe -mode=silent -silent_xml="C:\Temp\silent.xml" -log="C:\Temp\silent-install.log", it crash with these 2 errors.
ERROR [readSilentXML] com.bea.plateng.wizard.installer.common.parsers.TemplateParser - Got an error in parsing template.xml!
ERROR [readSilentXML] com.bea.plateng.wizard.installer.silent.tasks.ReadSilentXMLTask - java.lang.NullPointerException
Here's the content of my xml file.
<?xml version="1.0" encoding="UFF-8"?>
<bea-installer>
<input-fields>
<data-value name="BEAHOME" value="C:\Oracle\Middleware_Home" />
<data-value name="WLS_INSTALL_DIR" value="C:\Oracle\Middleware_Home\wlserver_10.3" />
<data-value name="INSTALL_NODE_MANAGER_SERVICE" value="yes" />
<data-value name="NODEMGR_PORT" value="5559" />
<data-value name="INSTALL_SHORTCUT_IN_ALL_USERS_FOLDER" value="yes" />
</input-fields>
</bea-installer>
I need to deploy it to Windows 7 Ent SP1 x64 computers. So I sure like to know what I'm doing wrong?!
Note: I didn't use the value COMPONENT_PATHS because I want to install everything.
Thanks in advance for the help!

I solved the problem myself. I think I was missing my caffeine ;-) <?xml version="1.0" encoding="*UFF-8*"?>
Have a good day!

PI 7.11 JMS adapter using JNDI weblogic server issue

Hi SAP experts,
I have a scenario to integrate to a application using JMS adapters. we use SAP PI 7.11 version.
We have deployed JMS drivers successfully and We face issue here to connect to weblogic server
We are using JMS adapter using JNDI to connect to weblogic server version 10.3.
Can anyone help with the exact format to be used in JMS properties table and additional parameters table in JMS communication channel. Your quick help will be appreciated.
A channel error occurred. The detailed error (if any) : com.sap.aii.adapter.jms.api.connector.ConnectorException: Error looking up destination: AccrualDetailsQueue for profile: ConnectionProfile of channel: CC_SND_JMS on node: 3010950 having object id: 673696a9fe8c39fdab32213f0930afb3: javax.naming.NameNotFoundException: Unable to resolve 'AccrualDetailsQueue'. Resolved ''<br> at com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination(JndiConnectorImpl.java:168)<br

Hi Padmini,
Refer to the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
It was very helpful to me, for configuring the additional parameters in the communication Channel JMS.
I leave you some screenshots of the settings that I did.
I seize the opportunity to ask you, where do I can get the drivers (.Jar) for Weblogic?
Regards.
Rodrigo.

WebLogic Server 10.0 MP1: Error in resource adapter deployment

When I try to deploy our (own implemented) resource adapter into WebLogic Server 10.0 MP1, I get the following error message:
An error occurred during activation of changes, please see the log for details.
weblogic.security.service.InvalidParameterException: weblogic.security.service.SecurityServiceException: [Security:090198]No appropriate constructor for java.util.logging.LoggingPermission
java.util.logging.LoggingPermission.(java.lang.String)
The same adapter works flawless with Oracle AS/OC4J, JBoss 4.2 and Glassfish V2.
In the security-permission-spec element of our ra.xml file we use (beside others) the following permissions:
permission javax.management.MBeanTrustPermission "register";
permission java.util.logging.LoggingPermission "control";
When I delete this two lines from the security-permission-spec element, I can deploy the adapter in WebLogic.
For me this seems to be a bug in WebLogic 10.0MP1.
Best,
Manfred

Re: Installation error: Weblogic Server 10.0 MP2

FTPs adapter setup on Weblogic Server

Hi,
I am trying to setup ftps adapter for BPEL PM 10.1.2.0.2. running on Weblogic Server 8.1. BPEL does support Ftps for this version but it seems weblogic doesnot support ftps. Will this mean that I cannot set it up on WLS.
I have tired to make changes in weblogic-ra.xml file and included all the params required for ftps adapter setup but I always get an error - connot login, please check username and password.
Please help me on this and suggest if any other alternatives are possible.
Regards
Arvind

Hi,
Any help on this ??
Regards
Arvind Aggarwal

Problem with OEPE Weblogic Server Startup

I am trying to start a WebLogic 9.2.x server in Eclipse without much success.
I have the very latest version of the OEPE Plugin for Eclipse.
When I attempt to start my WebLogic Server from within Eclipse, I get an error (without a stack trace) that says "Start script cannot be found".
I'm not sure exactly which start script it is talking about, but I believe I have the correct ones in my server domains bin directory, specifically, startWebLogicEx.cmd and startWebLogic.cmd.
Could this be a pathing issue within Eclipse that it cannot locate my domains bin directory?

Is there any way to specify directly to look in the bin/ subdirectory? I've modified the run configuration to use the startWeblogic.cmd in the bin/ location, but it still fails.
Thoughts?

How to add SIP servlets pluggins to OEPE for Oracle weblogic server 10.3.4

Please procide the solution to :
Is it possible to add SIP servlets pluggins to OEPE for Oracle weblogic server 10.3.4.0 or OCCAS(Oracle communication Converged Application Server)??
As Its not their by default.
Please do the needfull...

This forum is for Oracle WebLogic Communication Services. Please direct your question to one of the WebLogic Server forums or to OCCAS forum/support.
- Dev

Oracle SOA Suite 11.1.1.5 and weblogic server with OEPE

Hello
Where can I find the installers for Oracel SOA Suite 11.1.1.5 and corresponding supported weblogic server with OEPE.
I want to install this on Debian and on Oracle Solaris 10 both, so better to have generic installers.
Few months ago, i could find them (2 months ago), but not now anywhere, not even on edelievery.
Where does oracle store all older version installers?
Regards

Hi
Download wls1035_oepe111172 Generic Version from below link.
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
Thanks,
--Vijay

Inqmy resource adapter for SAP with Bea Weblogic Server

          Hi everybody,
          Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic server
          It works well with INQMY server, but with BEA I'm getting a lot of problems creating
          the connections.
          Thanks in advance.
          Xavi.


All,
          Here are the steps we (used for internal testing) had to perform to get
          IN-Q-MY adapter for SAP to work with WebLogic:
          The wli.adapter.inqmy.sapr3.spi package contains extensions to the
          In-Q-My J2EE Connector Architecture classes to overcome some limitations
          in the base implementation classes. To get around these issues, we had
          to extend their R3ManagedConnectionFactory, R3ConnectionManager, and
          R3ConnectionFactory classes.
          * The javax.resource.spi.ManagedConnectionFactory implementation
          does not over-ride the equals and hashCode methods correctly. This
          causes problems with WLS 6.1.
          * There is a bug in their javax.resource.spi.ConnectionManager
          implementation for non-managed uses of the adapter. Consequently, their
          adapter cannot be used in a non-managed scenario.
          * The javax.resource.cci.ConnectionFactory class does not support
          the getConnection() method that does not take any arguments (it throws a
          null pointer exception).
          I am attaching the classes discussed above.
          Cheers,
          Chris
          Torsten Friebe wrote:
          > Hi,
          >
          > does anybody know where to get a trail version - if one exists - of IN-Q-MY
          > application server or the resource adapter?
          >
          > Thanks, regards
          > Torsten
          >
          > "Xavi" <[email protected]> schrieb im Newsbeitrag
          > news:[email protected]...
          >
          >>Hi everybody,
          >>
          >>Anybody have tried to use INQMY resource adapter for SAP with Bea weblogic
          >>
          > server
          >
          >>?
          >>
          >>It works well with INQMY server, but with BEA I'm getting a lot of
          >>
          > problems creating
          >
          >>the connections.
          >>
          >>Thanks in advance.
          >>Xavi.
          >>
          >>
          >
          >
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.cci.Connection;
          import javax.resource.cci.ConnectionSpec;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          import com.inqmy.r3adapter.R3ConnectionSpec;
          import com.inqmy.r3adapter.R3ManagedConnectionFactory;
          * Extends the In-Q-My implementation to allow for getConnection() with no
          * connection spec, i.e. use the default configured connection parameters.
          public class R3ConnectionFactory
          extends com.inqmy.r3adapter.R3ConnectionFactory
          implements com.bea.connector.IProxyMarker {
          private R3ConnectionSpec m_cspec;
          public R3ConnectionFactory(ConnectionManager cm, R3ManagedConnectionFactory mcf)
          throws ResourceException {
          super(cm, mcf);
          String strClientNumber = mcf.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+mcf);
          String strLanguage = mcf.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+mcf);
          String strUserName = mcf.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+mcf);
          String strPassword = mcf.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+mcf);
          m_cspec = new R3ConnectionSpec(strClientNumber, strLanguage, strUserName, strPassword);
          public Connection getConnection(ConnectionSpec connectionSpec)
          throws ResourceException {
          if (connectionSpec == null) connectionSpec = m_cspec;
          return super.getConnection(connectionSpec);
          package wli.adapter.inqmy.sapr3.spi;
          import java.io.Serializable;
          import javax.resource.ResourceException;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.resource.spi.ManagedConnectionFactory;
          * Extends the In-Q-My implementation to over-ride the
          * allocateConnection method to return a CCI connection vs. a ManagedConnection
          public class R3DefaultConnectionManager
          implements ConnectionManager, Serializable {
          public R3DefaultConnectionManager() {}
          public Object
          allocateConnection(ManagedConnectionFactory mcf, ConnectionRequestInfo cri)
          throws ResourceException {
          ManagedConnection mc = mcf.createManagedConnection(null, cri);
          return mc.getConnection(null, cri);
          package wli.adapter.inqmy.sapr3.spi;
          import javax.resource.spi.ConnectionManager;
          import javax.resource.spi.ConnectionRequestInfo;
          import javax.resource.spi.ManagedConnection;
          import javax.security.auth.Subject;
          * Extends the In-Q-My implementation to get around some problems encountered
          * while running on WebLogic:
          * <ul>
          * <li>Must over-ride default implementation of equals and hashCode method</li>
          * <li>Needed to provide my version of the CCI ConnectionFactory</li>
          * <li>Needed to provide my version of the default ConnectionManager for the
          * non-managed scenario use case</li>
          * </ul>
          public class R3ManagedConnectionFactory
          extends com.inqmy.r3adapter.R3ManagedConnectionFactory {
          private int m_iHashCode;
          transient private com.inqmy.r3adapter.R3ConnectionRequestInfo t_cri = null;
          public R3ManagedConnectionFactory() {
          super();
          java.rmi.server.UID uid = new java.rmi.server.UID();
          m_iHashCode = uid.hashCode();
          public Object createConnectionFactory() {
          // need to install our own default connection manager because In-Q-My
          // version causes a ClassCastException in CCI ConnectionFactory
          // getConnection
          return createConnectionFactory(new R3DefaultConnectionManager());
          public ManagedConnection createManagedConnection(Subject subject, ConnectionRequestInfo cri)
          throws javax.resource.ResourceException {
          // need to check for null on the ConnectionRequestInfo object because the
          // In-Q-My R3ManagedConnection ctor does not check for null
          if (cri == null) cri = getDefaultConnectionRequestInfo();
          return new com.inqmy.r3adapter.R3ManagedConnection(this, subject, cri);
          public Object createConnectionFactory(ConnectionManager connectionManager) {
          // need to supply a connection factory that can deal with getConnection
          // that does not take a ConnectionSpec
          try {
          return new R3ConnectionFactory(connectionManager, this);
          } catch (javax.resource.ResourceException re) {
          re.printStackTrace();
          throw new java.lang.IllegalStateException(re.getMessage());
          com.inqmy.r3adapter.R3ConnectionRequestInfo getDefaultConnectionRequestInfo()
          throws javax.resource.spi.IllegalStateException {
          if (t_cri == null) {
          String strClientNumber = this.getClientNumber();
          if (strClientNumber == null) {
          throw new javax.resource.spi.IllegalStateException("ClientNumber not set for "+this);
          String strLanguage = this.getLanguage();
          if (strLanguage == null) {
          throw new javax.resource.spi.IllegalStateException("Language not set for "+this);
          String strUserName = this.getUserName();
          if (strUserName == null) {
          throw new javax.resource.spi.IllegalStateException("UserName not set for "+this);
          String strPassword = this.getPassword();
          if (strPassword == null) {
          throw new javax.resource.spi.IllegalStateException("Password not set for "+this);
          t_cri = new com.inqmy.r3adapter.R3ConnectionRequestInfo(strClientNumber, strLanguage, strUserName, strPassword);
          return t_cri;
          public boolean equals(Object obj) {
          if (obj == null) return false;
          if (obj == this) return true;
          if (!this.getClass().isInstance(obj)) return false;
          R3ManagedConnectionFactory mcf = (R3ManagedConnectionFactory)obj;
          return compare(getClientNumber(), mcf.getClientNumber()) &&
          compare(getLanguage(), mcf.getLanguage()) &&
          compare(getUserName(), mcf.getUserName()) &&
          compare(getPassword(), mcf.getPassword()) &&
          compare(getServerName(), mcf.getServerName()) &&
          compare(getSystemNumber(), mcf.getSystemNumber());
          protected final boolean compare(final Object obj1, final Object obj2) {
          if (obj1 == obj2) return true;
          if (obj1 != null) {
          return obj1.equals(obj2);
          } else {
          if (obj2 == null) {
          return true;
          } else {
          return false;
          public int hashCode() { return m_iHashCode; }

JCA Resource adapter deployment in Weblogic server

Hi,
I have deployed a resource adapter successfully in Weblogic server and works fine.My resource adapter has weblogic-ra.xml and ra.xml available under meta-inf folder.I have provided some properties in weblogic-ra.xml and ra.xml but unable to see the same properties when i open the resource adapter settings page in the the weblogic administration console
I want to change resource adapter properties from weblogic adminstration console but dont see the properties which i used during deployment.
Can someone help with identifying the issue or if i have to do something different.
Appreciate any help.
Thanks
S

Not sure what might be causing this behavior. Property values in ra/weblogic-ra.xml should be displayed on the console (http://machine:port/console). I think I have experienced similar issue only to realize that console only displays 10 properties and other properties are displayed after pressing Next link on the page.
How many proprieties you have? What are getting displayed and what properties are not getting displayed?
Manoj

OEPE 11.1.1..6.1 WebLogic server

Oracle Enterprise Pack for Eclipse 11gR1 (11.1.1.6.1) does not include WebLogic server as a server configuration.

It sounds like you are running into configuration and/or installation issues. Could you describe how you have installed OEPE? Did you use one of the provided all-in-one kits or did you install from the update site? If you installed from the update site, please describe your starting configuration (eclipse package name, version, other plugins installed).
- Konstantin

No Weblogic server adapter in OEPE (12.1.3.1)

Similar Messages

Maybe you are looking for