No white boot screen whit black apple on my white 4s!

Hi there,
I saw that some of my friends with white iphone's like mine's, have as boot logo a black apple white an white background!
If any one know how to do that on my iphone 4s i'll thank him very much!

The white bootup screen is only for iPhone 5 and above I believe.
My friend has a white iPhone 4 and I tested a white 4S at the Apple Store, they don't support it.

Similar Messages

  • My iphone 6 wont go past the start up screen (white screen with black apple) iv treid restoring it on itunes but it disconects its self half way through

    my iphone 6 wont go past the start up screen (white screen with black apple) iv treid restoring it on itunes but it disconects its self half way through. what can I do

    Did you try to use recovery mode, explained in this article?
    If you can't update or restore your iOS device
    If it does not work after that, you'll have to get it serviced:
    iPhone - Contact Support - Apple Support

  • My iPad wont turn on, its black screen then i press home power buttons together and white screen with black apple logo come out after 5 seconds black "lighten" screen comes out and its stuck just like that! Whats the problem?

    HI
    this happened today suddenly while i was working on my iPad it kicked my out of the app that i was using then white screen with black apple logo came out, i thought it was an ordinary thing cause this happens all the time with me, but this time it refused to turn on! After the white screen with the black logo vanished i wad waiting for my lock screen but no, a black screen showed up just like that! And could tell it was black "lighten" screen i tried more than 10 times to do the home+power thing but it wont work, whats wrong with my ipad!

    If the battery is completely drained it may take some time while on the charger before the iPad responds. Plug the iPad into the charger that came with it and plug that into a good wall outlet. Wait one hour. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad restarts let it continue to charge until the battery is 100%. If it doesn't start up make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. They will examine your iPad and explain your options.

  • After resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

    after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

    Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
    If you can't update or restore your iOS device

  • HT5654 my iphone 5 fell did not break but went completely black and non responsive. When I plug it to the computer I get a white screen with black apple. When I push both the Top and Homne buttons simultaneously I get the charger picture plug end plus arr

    my i phone 5 was dropped, didn't break but went completerly black screen and nonresponsive. I pushed both the home button and top button no response. I plugged it to the computer it gave me white screen with black apple. I pushed the home and the top went black then gave the itune and the charging plug picture. I tried to download and update, the message came as couldn't restore due to unknow error. Any help??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPad Air gets suddenly white screen and black apple

    When I am working, my iPad Air gets suddenly (one or two times per week) white screen and black apple screen for a few seconds before I get back the control, anyone has the same problem?

    It could be an OS issue but I would not bet on it. I just had a similar case myself (but white apple on black screen) on two unconnected devices almost simultaneously - both on an iPad and on an iPod touch. It is possible that there is something different going on here, perhaps at Apple's servers.
    It could of course also just be a coincidence.

  • HT4053 I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo

    I start my new iPhone 5s 64 for first time , no hello screen , only white screen with black apple logo
    How can I start my iPhone (I already did restart - it didn't help)

    Did you activate the phone already?

  • My ipod touch will not work the screen is black with a small white circle/wheel in the middle of it no matter which button i press and hold nothing happens

    My ipod touch stopped working. The screen is black with a small white circle/wheel with ridges/teeth in the middle of the screen. No matter what button is pressed and/or held nothing happenes. Can anyone assist me?

    Try the remaining items of:
    iOS: Not responding or does not turn on
    If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least and hour try again.
    - If still problem time for an appointment at the Genius Bar of an Apple store.

  • My MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further. What to do?

    my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
    What to do?
    Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
    Thanks
    V

    Try this:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • White boot screen doesn't fill screen

    I'm not sure when this started happening, and it's not too big a deal, but now, when my unibody 17" MBP boots, the white boot screen looks like a 4:3, low-res image with black bands on the sides. Basically, it doesn't fill the screen like it used to.
    I have plugged it into a projector using the Mini Display Port to VGA adapter. Might that have something to do with it? Is there any way to fix it?

    Try resetting the computer's PRAM, by rebooting and holdiing down the options-command-P-R keys all at once. Let the computer reset and chime a couple of times, and then release the keys and allow it to boot normally.

  • When powering up my macbook, all i get is a white/grey screen with an apple in the centre.

    When powering up my mac, all im getting is a white/grey screen and an apple in the middle of the screen. There is a timer going around and around underneath this. Any Suggestions?

    See here: iPod Displays a Red "X" Icon
    Note that if it is often the sign of a hardware issue, usually with the iPod's Hard Drive.
    B-rock

  • I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

    I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

    Apple guarantees their work, take it back.

  • Iphone stuck on white screen with black apple logo

    I was updating my Iphone 5 to the new update and left it plugged in to finish the update. When I came back it was stuck on the white loading screen and a message on the computer said iTunes could not connect to the Iphone because it was locked with a passcode and wants me to enter the passcode. However I cannot enter the passcode because the phone won't let me. I cannot get the iphone to shut off or restart as my top button hasn't been very responsive lately. Any suggestions I leave the country for a month on the fourth and need a working phone asap.

    You should contact Apple. There is a replacement program for defective power buttons.https://ssl.apple.com/support/iphone5-sleepwakebutton/

  • TS2570 Startup:grey screen,then black,then grey,then white,then desktop. How can I fix this?

    Normal startup, from grey screen to black screen, to blank grey screen, then blank white screen, then to normal desktop. All apps appear to work properly. Why the black and white screens? How can I fix this?

    This is the KB article you need: Mac OS X: Gray screen appears during startup
    The printer problem is another story, and no I don't believe the solution is to upgrade OS X.
    Could you please post a brand new question about the printers? This one won't get much attention if it is marked "solved" and the printer problem will require a new solution. Thanks!

  • My screen is black with the small white circle and seems to be frozen

    My screen is black and seems to be frozen... PLease help

    Try to Reset your device. 
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

Maybe you are looking for

  • Connect to PC Companion via Wireless

    Hi everyone, I have a SE XPERIA X10. I don't use PC Companion often enough just because, whenever I want to connect to my pc, I need to get the micro USB to do that. PC Companion offers connection via wireless for only 4 phones (3 models). XPERIA Arc

  • Information Steward 4.2.1 not installing Data Cleansing Advisor (DCA) database

    Our situation is as follows: We have a SAP BusinessObjects BI 4.1 Sp3 system on Windows Server 2012. We are installing the following components onto a separate, new Microsoft Windows Server 2012 platform (in this order): - Information Platform Servic

  • Error / Failed to create file in the network

    I'm using and enjoying the Oracle Data Integrator and created two packages for extraction and loading. But trying to create the file in the directory on the network get an error. I checked the permissions, but without success. Can anyone help me? Tha

  • No confirmation through Collective Confirmation CO12

    Hi We are having setup 0010 and 0020 operation, at 0010 PRT is attached with usage value calculation. While confirming through CO12 transaction. and putting all operation together There is no confirmation is executed. We get the message "No confirmat

  • Multiple images become locked horizonally instead of mounting contiguously

    After recently reinstalling CS5 and I now place a group of image files on screen, they become locked together horizontally instead of mounting contiguously slightly overlapped diagonally as before, so what did I miss indicating in PS preferences (?)