No Wi-fi - 1st gen

The Wi-fi tab in the settings menu is greyed out and is locked-I cannot even access the contents of the Wi-fi tab. It says "No Wi-Fi" across from the label of the tab. I have reset "all" settings and "network" settings. What can I do?

Plugin the iPod.
Launch iTunes.
Select the iPod in the Source list on the left.
Hit the restore button on the right.

Similar Messages

  • Three movies I bought from iTunes this morning do not show up on the 1st Gen AppleTV.

    I understand some file formats are not compatible with AppleTV (1st gen) but these films were purchased directly from iTunes.  One would assume they are formatted properly to work on Apple equipment, yes?  Previously purchased movies show up on the AppleTV just fine, so I'm not sure what's going with these three.  They were from the $4.99 Sci Fi collection:  Enemy Mine, Dune and Terminator 2.  Oldies but goodies.  The iMac, where the iTunes Library lives is used to stream the content to the AppleTV, and everything that is in my Library appears to be available for streaming, except these three films.  Any advice?

    I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
    Unbelievable.

  • ITunes does not show up on apple tv 1st gen.

    i have a 1st gen apple tv with the 160 gig HD. recently, it will not show the itunes site. Under teh movies tab there are my movies and trailers and that's it. Does anyone know how to get the itunes store back on apple tv?

    Known issue currently, you'll need to wait for the fix.

  • HT203167 A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps.  Where is it and how do I find it?  I believe I originally purchased the film on my 1st Gen AppleTV.

    A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps.  Where is it and how do I find it?  I believe I originally purchased the film on my 1st Gen AppleTV...other movies show up. Help.

    It was Love Actually. It's been in my library a few years but is now missing. It's odd...it isn't even in the iTunes Store anymore. I think there is a rights issue because a message appeared in the store saying it wasn't available at this time in the U. S. store. Still, if I bought it years ago it should be in my library or I should get a refund....

  • Movies in my iMac's iTunes do not show up Apple TV(1st Gen)

    So frustrated. Movies in my iMac's iTunes do not show up on my Apple TV(1st Gen) in the Shared Movie area. I've done the Media Type fix to "movie." I've re-started and re-booted and changed the Apple TV from ethernet to wireless and re-connected iTunes. Renamed the library. Everything's up to date. Grrr.

    I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
    Unbelievable.

  • How to use iPad with apple tv (1st gen) mirroring

    Can appletv 1st generation be configured with ipad2 to do mirroring??
    I can't seem to figure out where to set that up..
    Any help would be appreciated.

    Disregard...just realized I need to buy an appletv 2 in order to do mirroring.....that really *****!
    I like the 1st gen and really didn't need to upgrade to a new one.
    If there is some other way to do mirroring from my ipad2, please let me know before I drop more $$ on Apple product.
    Thanks

  • Apple TV 1st Gen can no longer connect to wireless networks

    My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home.  I rean the diagnostics at the reset screen and the Apple TV says it is performing normally.  In the settings, whenever I attempt to connect to a wireless network, I am now only offered "Other..." as a choice. Proceeding to the next screen, I enter the name of the network closest to the Apple TV -- an Airport Extreme set up for 5 GHz that this Apple TV connected with daily up until 2 days ago.  The Airport base station is perfoming normally, as my MacBook Pro can see it and establish a network connection without any difficulty.  The issue is limited to the Apple TV.  I did a Factory Restore, and now when I go to Wireless Network > "Other..." > Enter the name of the wireless network"  the resuit is always the same, and error message stating: "There was a problem connecting to the network. Check your settings and try again. (-4)".
    This message comes up almost immediately, without requesting a WiFi password -- suggesting to me that this Apple TV has lost the ability to connect to ANY wireless network due to a hardware failure.
    Q: Has anyone else in the Support Community had a similar experience with their 1st Gen Apple TV, and if so, did you find a solution to it?
    Note: When I first noticed the connction to this Apple TV had gone stale (greyed out in the iTunes Airplay Speakers list), and prior to doing the Factory Restore, I could play back iTunes content stored on the hard drive, but could not connect to the local wireless networks.  I noticed that the Apple TV was running very hot -- it has alwasy run pretty hot to the touch.
    If this Apple TV has died, I will get a 3rd Gen Apple TV, but wiill then have to work through the HDMI to Composite video + Audio issues, as this Apple TV is connected to our older (non-HDMI) TV.

    Follow-up:  Able to connect with ethernet cable, downloaded software updates, connected to iTunes, and synchec content.
    Next, disconnected the ethernet cable.  ATV1 froze and was restarted using the Menu + ( - ) combo on the remote.  Re-ran diagnostics yeilds: Apple TV is working fine.
    Restarted, then went to configure the Wirelss settings.   Apple TV once again does not show either of the two wireless networks.  Selecting "Other..." and entering the SSID yields the same immediate response:
    "There was a problem connecting to the network. Check your settings and try again. (-4)"
    No change on the wireless front :-(   Bummer.
    Looks like an ethernet connection is the only option left to continue using this Apple TV 1st Gen.
    Thanks for your help. -- Paul

  • IPod 1st Gen (Touch wheel, 10GB) isn't recognized - missing software?

    Recently, my 80GB video iPod decided to simply die on me, so I dug out my very first iPod, from 2001 or '02 I believe.
    It turns on fine, can scroll through menus, but there's nothing on it anymore - plug it into my computer (firewire-to-firewire), and the iPod goes through a menu where there's the disc and a magnifying glass and eventually a check mark (connotating that everything's fine) - but it never docks onto the computer or shows up on iTunes.
    I've SCOURED the internet for old iPod software updates, trying to find one early enough, so it can recognize it and I can restore and hopefully the problem will be fixed - but there's been SO many iPods since then, it's ancient, and no support was found anywhere.
    Does anyone have a solution, or a link to the earliest of iPod updaters? I looked for documentation, but it was 9 years ago - I don't have the CD anymore or anything. Any help would be greatly appreciated.
    *In the 'About' menu on the iPod, the current version that's installed is 1.5 - don't know if that matters.
    **I'm trying to connect to a 15-inch PowerBook G4 (Aluminum?), currently installed with iTunes 8
    Message was edited by: Cassidy Knight (still)

    The current version of iTunes should be able to connect to even the 1st gen iPod. The one you have is 2nd gen, if it's the one with the four clicking buttons around the touch wheel. I have one of those, and although I use it as my little emergency/maintenance FireWire startup drive (because the screen failed on it), it is still recognized by iTunes on my Mac. Over FireWire, of course.
    The first thing you should try is to put it into Disk Mode.
    http://support.apple.com/kb/HT1363
    Note: The procedure for your iPod is at the bottom, where it says +If you have an older iPod model without a Click Wheel+.
    If that works, connect it to the computer. Hopefully it will appear both on your desktop and in iTunes. If so, use the Restore button in iTunes to erase the iPod's hard drive and initialize its software. The latest available version of the software for that iPod will be installed.
    You may also want to try a different FireWire cable. It's just a regular cable, so you don't have to use the thin white one.

  • IPod 1st Gen (Scroll wheel) not recognized by iTunes

    iPod 1st Gen (with scroll wheel) will not connect to iTunes 12.1 on MacBookPro.  Charging when I plug it in, want to add music to it, but iTunes will not recognize it.  Anyone have any suggestions or does anyone know if this iPod is no longer supported by iTunes?

    Hello nveroff,
    Thank you for using Apple Support Communities. 
    If your iPod is not being recognized in iTunes on your Mac, you can use the following article for troubleshooting. 
    If you don't see your connected device in iTunes for Mac - Apple Support
    Ciao,
    Jeff D. 

  • 1st Gen Shuffle not recognized by Windows XP Pro

    I cannot get my 1st gen shuffle to be seen by Windows XP Pro. We have all the updates, the latest version of iTunes. The Shuffle plays, it connects to another computer running Windows XP. I see several messages here that point to different articles. The only thing we haven't done is edit the registry.

    Have you tried going through the steps here: http://docs.info.apple.com/article.html?artnum=305136
    If that doesn't work, sometimes other USB devices plugged in can cause this. You may want to try removing any other USB devices plugged into the CPU (other than the keyboard and mouse).
    Also, what version of iTunes are you running? Check that by going along the top of iTunes and choosing Help>About iTunes.

  • Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

    My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

    Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

  • My ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    I have not seen a solution for error (1)
    make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • Remote app on Ipad 2 (and Apple TV 1st gen)

    Hi,
    I have an Apple TV (1st gen) which I control thorugh an Iphone 4 and Ipad 1. I recently bought an Ipad 2 and installed the Remote app. The app finds my ATV and I can control the music in it, but the control function (that allow the ipad screen to become a trackpad) is missing, so I cannot navigate on the ATV's menu. I can still do it on the Iphone4 and Ipad 1 (even with the updated IOS). I have tried deleting and reinstalling the app on my Ipad2 but the control function is still missing. Has anyone experienced this before? Do you know how to fix it?
    Thanks in advance!

    Have you tried resetting the iPad, to do this:
    Press and hold the Home button and the Wake / Sleep buttons at the same time, keep them both pressed until you see the Apple logo appear on the screen (ignore the swipe to turn off message, keep the buttons pressed).

  • Unwatched items not syncing with Apple TV (1st Gen)

    Hopefully someone can help me?...
    I have a 1st Gen Apple TV, Windows 7 64bit, and iTunes 11 (wishing I'd never upgraded now!)
    I have it set up to Custom Sync (FILMS: Automatically include 'all unwatched' films with selected films. TV PROGRAMMES: Automatically include 'all unwatched' episodes of 'all programmes'. And not to sync anything else.)
    Before, in version 10, if you made the slightest of changes (even marking something as watched then as unwatched) you could press the Apply or Sync button.
    But now when I add a new Film or TV Show, or mark one as unwatched, I cannot sync it to my Apple TV.
    iTunes marks it as New/Unwatched but the Apply button stays greyed out and I cannot Sync.
    Any ideas welcome.
    Thanks.

    I have a similar problem. ATV1 (3.0.2), itunes 10, connected via wireless time machine (hardwired to router) + airport express wireless extender. ATV showing in itunes menu. All TV shows, movies, music etc showing on ATV (not sync'd) EXCEPT 4 episodes of one TV show that was purchased as a series on iTunes (not on the ATV).
    I have also had the firewall error - intermittently.
    Have rebooted iMac. Have factory reset ATV and re-set up. Tried just sync'ing the 4 episodes I want to watch. No luck. Tried marking episodes as watched. No luck. rebooted everything. Twice.
    ATV1 accesses all other info on iTunes (music, movies etc).
    Infuriating.
    Any ideas?
    Message was edited by: CMFIELD

  • My Apple TV (1st Gen) will not synch with iTunes on my Laptop

    I've been trying to do this for a while, it shouldn't be too difficult i think.
    All i want to do is synch all the content on my laptop with my Apple TV (and vice versa) so all the content including photos and home videos is the same on both my Apple TV and my laptop.
    Some points:
    There's enough hard drive space on both
    I'm using Windows 7 ultimate on my laptop
    The correct port exceptions have been added to Windows Firewall
    I have purchases on both my laptop and Apple TV from the iTunes store
    We're using a wireless network and it while it's possible to get them both cable wired, it would be a pain
    Home networking is set up in iTunes on my laptop
    I've set up my Apple TV to synch (not stream) with my account on my laptop
    Both iTunes and Apple TV are up to date with their downloads
    I think that's it - am i missing anything, or should this now just work?
    Cheers
    David

    As per the question, really...
    "My Apple TV (1st Gen) will not synch with iTunes on my Laptop"
    There's no error messages
    Only the films i've bought on my AppleTV appear on my AppleTV
    It's been synching for over 4 hours and hasnt got past the first film and the progress bar is not moving
    David

Maybe you are looking for

  • How can I extract images form other web pages with an applet?

    Hello I have a problem Here is my code import java.net.*; import javax.swing.*; import java.awt.image.*; public class Cursbnr extends JApplet{ public JLabel EuroValue =new JLabel();      public JLabel DolarValue =new JLabel();      public JLabel Gold

  • I Lose Internet connection each time my Mac Sleeps

    I have an iMac 21" late 2009 model. Since I installed Lion, every time my Mac "nods" after leaving it a bit, after waking up it will take about a minute for the internet connection (dsl ethernet) to come back. It's frustrating, I turn on my mac to br

  • Closing window of web dynpro application with exit-plug don't run in the EP

    Hi everybody, I want to close a window that contains a Web Dynpro with a close button, because it's used and create as a popup from an other iView (that's not created with web dynpros) in the EP. I read the different threads how to close a window in

  • Picking up file sequentially using file Adapter

    Hi Experts, I am working on a scenario, where two type of files are coming to the source directory namely "Data File" and "Flag File". First, all the data Files will be coming and after that one flag file will be coming containing names of all the da

  • Getting complete WSDL for the web services created in J2EE

    Hi, I have created a web service using Netweaver developer studio for a J2EE project (complete EJB, WEB and Appln Project) similar to CAR rental application. I also have tested the web service in web service perspective and it is working fine. Now i