No wi-fi and bluetooth unavailable issue

NO WI-FI, Bluetooth Unavailable,,,,after reset.....
here is some snapshots from iPad
http://lh3.ggpht.com/2M7wMO3DVPg/TB8oNKVXCbI/AAAAAAAAAJk/1U21tXKEFEA/img_0966pkch35.jpg
http://lh5.ggpht.com/2M7wMO3DVPg/TB8oNT_wxLI/AAAAAAAAAJo/n_cdozLhWn0/img_0965pkch35.jpg
i've been read all messages in here..but i couldn't find right answer...
does anybody solve this problem..?
Message was edited by: kc park
Message was edited by: kc park

kc park wrote:
now you can see the images......
I see them now. I have not encountered those problems in this forum on on my ipads.
I would try to following in this order:
1) Press and Hold the Home and Wake Sleep buttons until the Apple Logo appears.
2) If that doesn't work, try a reset, To reset go to Settings, General, Reset, Reset. (Is this what you did when you mentioned reset?)
3) If neither help, try a restore with itunes/computer. This will reinstall the ipad's software.
If the problems persist, you should contact Apple or take the ipad back to the vendor.
I hope this helps.

Similar Messages

HT202639 WIFI and Bluetooth conection issues

I cant conect to the wifi neither i can conect to the bluetooth. I dont have any wifi adress (N/A) and i made the new update 8.1.3

Greetings Amanda,
If you are having an issue with connecting to Wi-Fi with your iPhone, I would suggest that you troubleshoot using the steps in this article -
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
This article should be useful for troubleshooting your Bluetooth issue -
iOS: Troubleshooting Bluetooth connections - Apple 支援
Thanks for using Apple Support Communities.
Be well,
Brett L

Updating 10.8.5 and bluetooth unavailable

I had bluetooth problem after updating 10.8.5. I decided to do a clean install of my system but it does not resolved my problem.
After a clean installation of Mountain Lion, I made an update combo 10.8.5. My MightyMouse has no more the functions to slide up / down and right / left.
The bluetooth works on my mouse and my keyboard but is not available any more and not visible on the preferences system.
I reset the PRAM and the SMC without result.
Thank you for answer and help.

You might try posting here.
Bluetooth Community

WIFI & Bluetooth unavailable after upgrading 2.0

Hi,
After upgrading to version 2.0.2 my IPhone has lost WIFI and Bluetooth. Mac addresses appears like 00:00:00:00:00:00 and the option in grey, saying "No Wi-FI" and Bluetooth unavailable.
I tried restoring to a previous version but not luck, looks like something becomes corrupt.
Is there any fix for that?
Thanks in advance.

Try this,
Reset Network Settings
Choose General > Reset and tap Reset Network Settings.
Or do a phone reset
Or return it to apple like this guy on http://gabriel.zeropeople.com/2008/08/15/iphone-wifibluetooth-problems/
Or the scary part
http://aakash-bapna.blogspot.com/2008/05/iphonesure-shot-fix-for-grayed-wifi.htm l
http://wikee.iphwn.org/sgold_bootrom:fixwifi

Setting shows "bluetooth Unavailable" and greyed out

looking for possible reasons, why iphone shows "bluetooth unavailable". sometimes it jumps to "bluetooth off", sometimes to "bluetooth on" and then unsuccessfully searching other devices. iphone is very slow and touch stream reacts with delay.
Any clue, if this is a hardware or software issue? How to fix?
Reset + restore not successful. iOS 4.2.1
Have not recognized the problem under 4.0 - but not sure, if upgrade is the cause of the issue.
Thanks for any hot tip.

SMC=system management controller...reset like this:
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Barry

Is there an issue with IOS8 and bluetooth connectivity?

I have downloaded IOS8 on my iPhone 5S & 4S, and now am not able to use the bluetooth phone connection in my auto.
Anyone experiencing this same situation?
j.v.fromnc

Does Apple respond to the Support Forum posts?
Is there a pending solution, and what is the timeline? Should I be raising my issues with Acura or Plantronics? I have read that RESET of the phone is a temporary solution. I am not going to reset my phone on a daily basis. The whole reason for iCloud backups is so I don't have to start over with each new device.
I have a business trip this week, and I use my car bluetooth and bluetooth headset heavily. Today I convinced a Best Buy Geek Squad employee to perform a little experiment with my iPhone 6 and iOS8.0.2. We did not try the Plantronic Voyager Legend, because it is my current headset, and does not work. We tried the Bose Series 2 (clearly price does not help compatibility), which did not work. We also tried a Jawbone Era and a $29 something, all without success.
8.0.2 worked until my phone battery died on Saturday.
Even if there are a variety of industry standards for Bluetooth technology, it is unreasonable that Apple excludes such a large percentage of the users market. I know Apple likes a good secret, but could they share enough information with the accessory market?
Why doesn't Apple aim to provide the world most stable operating system, instead of the most changing? I am all for change and innovation. I will even continue to pre-order the latest and greatest Apple product. But change without function or at a loss of function is ridiculous. I had this same experience with the iOS 7 release. I am sure that most of my issues will be resolved by Thanksgiving. Why not rewrite operating systems on a two year cycle, so you can actually test it first? I would appreciate if Apple stopped testing their products on the customers that are the most supportive.
PS This is not the only issue I have found (horizontal keyboard, apps sticking, etc, etc) This is just the issue that is effecting me most directly today. Apple you reputation is suffering. I think I just heard Steve Jobs turn over.

Touchpad and bluetooth issue

Hi,
The bluetooth and touchpad enable/disable feature is not working on my hp g4 1303AU model. I have installed lots of bluetooth drivers but to no avail.
Please advise.
Thanks,
Parag

Hello @paragpratim,
I have read your post on how the TouchPad and Bluetooth software on your computer is not functioning correctly, and I would be happy to assist you in this matter!
Since the TouchPad and the Bluetooth are collectively not working, I recommend installing the original software and drivers that first came with your notebook computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7) or for (Windows 8).
Once this software is installed, please follow this resource on Using HP Support Assistant (Windows 7) or for (Windows 8) to update the drivers.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..

Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..

Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).
iPhone 4S, iOS 5.1.1, VW bluetooth

Yoga 13 WiFi and bluetooth issue resolved

Unfortunately, I also met WiFi problems, but also found unexpected and sad solution.
Wifi worked pretty well at working place, but had problems at home. As an experiment I brought WiFi router from the working place home. It did not work!
At home I used pretty old keyboard and mouse plugged into passive USB hub. As soon as they were disconnected, problems disappeared. WiFi was also stable after I plugged power supply into the USB hub.
We are making 24-bit analog-to-digital converter that connects to the PC via USB. I exactly know its current consumption (300 to 330 mA) and know that it correctly handles USB rules about power regulations. Maximum current, specified by USB2.0 standard, is 500mA, so consumption of our ADC is within limits. As soon as I plug this ADC in, WiFi connection immediately disappears at the working place.
In the case of other devices, such as USB flash drive, power consumption may depend on the activity, increasing as it writes or reads something, and decreasing at the moment of inactivity.
I'm pretty sure that Lenovo placed their WiFi/bluetooth module on the same USB hub with right-side USB2 connector. Any device, that requires energy, being plugged into USB2.0 port, immediately destroys WiFi (and presumably bluetooth) and it is rather hard to get it back alive without special dancing around.
So, conclusion: never plug anything into USB2.0 port, if you need WiFi. This decreases number of available USB ports from two to one. Lenovo team should be blamed for that, not driver manufacturers or board manufacturers - Lenovo did non do its construction job well.
I am not sure, that all WiFi and bluetooth problems of Yoga discussed at this forum have the same reason. But in any case incorrect implementation of USB2.0 power should be considered before any other reason of malfunction.
Car manufacturers recall their products in the case of a failure. What about computer manufacturers?

Citation from Wikipedia:
The USB 1.x and 2.0 specifications provide a 5 V supply on a single wire to power connected USB devices. The specification provides for no more than 5.25 V and no less than 4.75 V (5 V ± 5%) between the positive and negative bus power lines. For USB 3.0, the voltage supplied by low-powered hub ports is 4.45–5.25 V.[61]
A unit load is defined as 100 mA in USB 2.0, and 150 mA in USB 3.0. A device may draw a maximum of 5 unit loads (500 mA) from a port in USB 2.0; 6 (900 mA) in USB 3.0. There are two types of devices: low-power and high-power. A low-power device draws at most 1 unit load, with minimum operating voltage of 4.4 V in USB 2.0, and 4 V in USB 3.0. A high-power device draws, at most, the maximum number of unit loads the standard permits. Every device functions initially as low-power — but may request high-power, and get it if available on the providing bus.[62]
Obviously, WiFi adapter is a high-power device. If it does not have sufficient power, it will start power saving program by reducing speed. Even lower power may interrupt ins basic functions. When I connect another high-power device (HDD or ADC) to the same hub, it should get its 500mA from the hub. Seems that starting at this moment WiFi receives much less current than it requires and stops working.
If something is plugged into USB3 port, and this something does not utilize all energy it requested, WiFi starts working again.
I would greatly appreciate if somebody repeats my tests using Yoga or Yoga 2 Pro.
Test:
Reboot your system, all USB devices disconnected
Open http://www.speedtest.net site and measure Download connection speed (Speed1)
Connect external HDD to USB2 (NOT USB3!) port
Wait until HDD is connected
Test Download speed once again (Speed2)
Report results to this blog as Speed1/Speed2 couple of numbers
Thank you in advance

IPad wifi and Bluetooth greyed out after iOS5 update

After updating to iOS5 on my iPad my WiFi and Bluetooth were greyed out like the update has caused a hardware failure on the radio side. My SIM and 3G still work (not that I use it) but I can not even choose wifi or bluetooth in settings app as they are greyed out.
In Wifi it says "No Wi-Fi" and Bluetooth it says "Unavailable"
I wasn't using it a lot so just forgot about it for a while as it sat gathering dust being an expensive paperweight thinking that the next software (5.0.1) update would sort it all out. It doesn't. I have a 64GB iPad 3G with no wifi and as I am living abroad the 3G is useless to me (though only use the ipad at home on my wirless network anyway, or not as the case is now!!)
I have restored, factory restored, cleaned installed new software, everything I can think of but still there is no wifi and no bluetooth.
Has anyone else had this issue? My (very expensive) iPad is now next to useless!!
ANY help is VERY much appreciated.

thank you for fast response and sharing the link but i've tried everything including downgrade but it seems that theres a serious problem with MC497LL model and trying to reach to the support for any updates about it at least trying to inform them

Mod_osso folder protection and file download issue

We are using 10.1.2.2 AS with SSO. I have a directory under the htdocs directory that I have specified to be protected via SSO. This part works fine.
I have a protected directory of log files which works fine. Even a log file of 54M downloads fine.
I have a protected DOCS folder that contains
1 .doc file 4.9M,
1 .doc file 78K
1 .pdf file 2.1M
After the user logs in via SSO, they can download the .pdf and the small .doc file, but the large .doc file gives the following error message:
Internet Explorer cannot download largefile.doc from localhost
Internet Explorer was not able to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later.
This has also happened to me in the past with large .zip files.

Hi!
I had wondered whether it was the websites issue: i've since managed to get the application-my friend downloaded it onto his phone over the internet and Bluetoothed it to me, so i've got it anyway. Just a bit strange, as i transfereed the file to my Mac and it decompressed into a folder again...
Oh well-i'm not into fiddling around so it can stay as it is! Thanks for the reply!

Mac Pro USB ports and bluetooth not working

I have a Mac Pro (early 2008) Quad-Core Intel Xeon, 2.8 GHz, 4GB ram, Airport card, Magic Mouse. Suddenly the keyboard and wired/bluetooth Mouse are unavailable, so it is not possible to control the computer. The only way I can use it is by using Screen Sharing from my MacBook Pro - which is obviously pretty useless except for diagnostics! All the USB ports (front and back, as well as those on the Cinema Display - when connected) are dead. System profiler shows no problem with them, but also shows nothing connected. Bluetooth in menu bar shows as "Bluetooth: not available", and in system profiler shows as "No information found".
I've tried all the usual remedies. Powering off overnight with power cord disconnected, all peripherals disconnected, then booting up again. Holding in the power button for ten seconds when the power cord is disconnected. Obviously I can't reset the pRAM (because the keyboard is not recognised, even before the OS loads). The first couple of times I tried this process, it did bring back the USB ports, even the bluetooth became temporarily available, but soon disappeared again. USB ports died next time I rebooted.
However, in the last couple of days, the process produces no results. No matter how long I leave it disconnected, USB ports are not working and bluetooth is just not there...
I've checked for other threads on this topic, but most other people seem to have issues with either front or back USB ports, or even just one or more individual ports. My problems have only been with all ports or none.
Does anyone have any suggestions to get my MacPro up and running again properly?

Just waking this thread up again in case anyone has had any other ideas.
Since last posting, usb became functional again, (came back on a couple of hours after a restart) and as long as I kept the machine alive, usb would stay alive. Bluetooth came back on briefly, but for most of the time was unavailable. System profiler shows no problems and Console does not report any usb related errors as far as I can see.
After a recent restart, usb disappeared again, and despite numerous restarts and being left on for a couple of days (and subsequently left off for several days) it has not come back. When usb is not working, examining the system profiler (through screen sharing from my macbook) usb shows no errors, but also shows no connected devices. I can charge my ipod nano with any of the usb ports (front or back), so power does not seem to be the issue.
I can't reset pRAM (because the keyboard is not available at boot), but have reset SMC numerous times. Have tried other keyboards, and mice. No joy.
I seem to have run out of ideas. Any suggestions?

TS1559 still no solution for greyed out wifi and bluetooth - what to do? been messing around with it for weeks and now discover I'm just outside of warranty period? WHAT?

I am in such a predicament - phone not been quite right since the 6.1 update and I was tolerating the inconvenience of switching off and on etc etc for the past couple of months and now the wifi and bluetooth are totally greyed out all the time - did every restore possible including back to factory settings - still no luck - please don't tell me that trying all the solutions over the past 2 months that temporarily worked for a few days at a time will now mean I have timed myself out of the 1 year warranty? arghhhhh (I can't believe that such an issue will create the response 'oh well, your problem - best just buy another one' ???)
I can't just drop everything and drive to the apple store and wait for hours every time there's a 'glitch' otherwise I may as well move nextdoor to the mall. They tell you to try and solve it yourself first - which I did - and now it's not responding to anything I try, will I be told - 'too late, out of warranty'???
I see theres an update for the iphone 5 that fixes wifi bugs - what about us 4s owners? even my 3 year old 3gs is still working on wifi (haven't dared to update it!) so don't start telling me to expect that the iphone will only last 13 months - NOT AT $600 a piece
This is madness and driving me crazy
Please has anyone had any luck fixing this problem???

well, you know how it is - glitches that usually resolve with a hard reset etc
then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!!

Internal Mic and Bluetooth not working together at the same time

Okay.. so I've been noticing this happen alot lately. Whenever I have my usb wacom tablet plugged in (which is almost always), there would be no internal mic input and bluetooth would become "not unavailable". Also, even when I try an external mic, there was no input. Could this be a coincidence or some related usb-bluetooth problem? Could it be my audio input or tablet driver problem?
I've used my mic to skype before I had installed the tablet. Also before I used garage band to record my sister's guitar with an external mic, there was no problem at all, and of course I didn't have my tablet plugged in at the time. Recorded a whole hours worth of music, and didn't have any problems.
Today.. I checked to see if my internal mic was working before I launched skype, and it was working perfectly, and I also noticed my bluetooth was available (didn't test it though). Then I went on skype talked to friend for about 20min, and suddenly the audio stop working. I had my tablet plugged in from earlier today. I restarted my macbook (with no tablet plugged in) and still mic input isn't working. I tried and external mic, but still nothing. I tried uninstalling skype, still nothing.
This is not the first time this happened, I noticed it would somehow fix itself after a few days every time, and mic and bluetooth would start working again out of nowhere. Which makes it even more weird.
Need help pleaseee!
PS. I tried getting someone to fix it before(a few months ago- I don't really use my mic or bluetooth much), but when I brought it in and started up my mac, at that time it was working again. But now it isn't working =(

UPDATE: I just noticed my bluetooth was no longer "unavailable", so I quickly went into system preferences, and noticed that my internal mic input had some input! Very weak though, only 1-2 bars. So what does this mean?

How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

Hello, lustige luka.
Thank you for visiting Apple Support Communities.
The Personal Hotspot feature using USB should be as simple as connecting the device to your Mac via the USB cable when Hotspot is enabled. Here is some more information regarding this feature and an article that will provide some troubleshooting steps if you are experiencing an issue.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Cheers,
Jason H.

No wi-fi and bluetooth unavailable issue

Similar Messages

Maybe you are looking for