No Wi-Fi !? Water dropped.
I'm sure someone has asked this before but heres what happened. my Itouch was dropped in water and now the WiFi button is grey saying No Wi-Fi. Is there anyway to fix this? Please help ): ! It is a Itouch 2ndGEN
kc park wrote:
now you can see the images......
I see them now. I have not encountered those problems in this forum on on my ipads.
I would try to following in this order:
1) Press and Hold the Home and Wake Sleep buttons until the Apple Logo appears.
2) If that doesn't work, try a reset, To reset go to Settings, General, Reset, Reset. (Is this what you did when you mentioned reset?)
3) If neither help, try a restore with itunes/computer. This will reinstall the ipad's software.
If the problems persist, you should contact Apple or take the ipad back to the vendor.
I hope this helps.
Similar Messages
-
My iPhone randomly makes a sound like a drop of water into a puddle. I've turned off all notifications and it till does it. Any suggestions?
Do you have an app called Life360?
See this thread: My 4s started making this strange sound like a ping/water drop! What is it? -
does it bring any harm or damage to the iphone 4s if let say there is a drop of water drop onto the iphone 4s RECEIVER??
Water and electronics are a bad combination. I've seen phones get a few drops of water on them and never work right again. Mind you, I've also seen phones (old flip phones) go through both washer and dryer and continue to work for years.
Does your phone still work? Are you experiencing any problems? If the answer to both of those questions is no, you should be okay. -
Water dropped in My MacBook air. What Should i do?
Some water dropped in My MacBook air, what Should i do now?
Make an appointment at an Apple store genius bar for a FREE evaluation.
DO NOT TURN YOUR MBA ON!
Try to dry it as best you can. Use an external fan. Do not use a heat gun or hair dryer.
Good luck.
Ciao. -
Just went on vacation unfortunately water drop in bag AND MY IPAD took some
just went on vacation unfortunately water drop in back AND MY IPAD took some still working but look like since 2 days does not accept my recharge cable message cable not apple certified ...any suggestion All function working fine but the display screen is alter
Try changing the cable.
-
Hi,
Hi can anyone tell me abt the term water drop in sapscript.
Regards,
james.I think it will be water mark and not the water drop.
If it is water mark means the imprinted image on the background of the text.
Regards,
Amit -
Dropped iPod in water, dropped iPod in water
dropped iPod in water. How do i fix?
FIrst, as to the response above....once you open those guts you void any and all of your warranty. SO know that before you to ripping into your device.
Second, an iPod isn't like a laptop inside, it's not simple modular bits that you can take apart and reassemble. The screen itself can be a complex device and if you don't get things exactly right, you will break it.
I would not recommend doing what Nan suggested unless you are very skilled with electronics and willing to accept all the consequences....for example, if you tear into it and it doesnt work, your chances of being eligible for an out of warranty replacement are greatly diminished if not gone all together. -
have a good suggestion. perhaps a you tube video. or perhaps a particular tutorial. Your answers will be greatly appreciated
Here is a link to sever of the water effects including the ripple effect
http://www.tutorialhero.com/tag-3-Water+Ripple.php
Some more http://www.cgshelf.com/flash_watereffects.php
Here is a link to some more other kind of water effects http://www.flash-filter.net/rain-drop-water-effect-online-demo.phtml -
Dropping iphone in water, dropping iphone in water
I dropped my phone in my tea for literally 2 seconds..the part that went in was where the headphone jack can go into? I can make calls and people can call me, but I can only hear them on speaker phone?
I got liquid into my iPhone, a small amount of liquid that went into the earpiece opening on the front the iPhone. I had the same problem as you for about a week and then all of a sudden the earpiece started working again. I guess it did when it finally completely dried out. I suggest you turn your iPhone off for about a week to see if drying it completely will get it to work normally again. Apparently putting it in a bag or bowl with rice can get it to dry quicker as rice will abosrb humidity.
This was my first iPhone a 3G in 2008. My niece now has this iPhone and is using it as an iPod touch, but I recently tested it by putting my Sim card on it with an adapter for size and it still works perfectly as a phone as well. -
What is up with the water drop sound?
This started on my phone a few days ago. I do not have Skype so suggesting turning the sound off doesn't solve my issue. It's getting annoying because I can't figure out what it could be. My husband's phone is doing the same thing.
Ocean20 is most likely the answer to your problem.
There are no apps running in the backround,
Its a POSSIBILITY they are still sending notifications.
Check if you are recieving any mail or messages/calls.
Or another possible solution:
Settings > Sounds
There you can choose ringtones/alert sounds when you get mail or recieve a message or anything.
Check to see if any of them have a name equivalent to a 'rain drop' or anything like that. If this works it will tell you what is making the noise and will let you change it -
My iphone4 was dropped into water in dammam
where i have a replacement of iphone4 for water dropped unit in dammam saudi arabia.
please help me.
<Personal Information Edited by Host>You could use a third party app on your computer, that uses the iPhone as just an external disk.
There are several like iExplorer, Diskaid, Phonedisk, etc. -
3 days old xperia Z2 leaked water inside with flaps closed
Hi below is my greivances and the bad experience and support I received from Sony Authorized service centre and Sony call support from India.
Below is the mail thread and it explains only a part of the story.
Waiting for decision from SONY to accept their manufacturing defect. So preserving my evidences of call, video footage describing phone not sealed properly etc.. Will blog all the evidences and the bad service responses and share the link in the forum after settling legal disputes.
[THREAD ID:1-LW06L7]
-----Original Message-----
Subject: Phones Question to support
Phone model: Xperia Z2
Message:
I am Gokul from chennai.
Bought Sony Xperia Z2 (D6502) on 21-05-2014.
With the flaps intact, I accidentally dropped the mobile in a plate today (24-05-2012) at 11.00 am.
The Radius of the plate is 12.1 cm and the height of water is no more than 5cms (Info just to get an idea of water pressure).
The mobile worked fine for a few minutes after taking out from water.
Then the display started to flicker and after about 10 mins the phone died.
Opened the flaps and I was shocked to see water inside the handset.
Contacted Sony service at the toll free number and the ticked number is 14052402607.
Then I went to Sony Authorised Center at Anna Nagar at around 3.00 pm and they informed me the handset would be replaced under Accidental damage protection.
But the problem is the manufacturing defect, that let water inside the mobile even with flaps closed. (As a matter of fact I never opened the flaps after inserting my SIM and Memory card because I ise magnetic charge cable)
Service center's point of view:
The customer would have dropped the mobile with ports open
And I perfectly agree with that.
Now I had completely dried my device by putting it into sack of rice. There is no water drops inside.
I can still proove in Authorised Service Centre by dropping the device in water to depth of just 5cm(but the device should be holding upto 1.5 metre) and the presence of water inside the flaps when taken out.
I remember bubbles coming out near magnetic charge port initially when dropped in water but believed in Sony nothing would happen.
I perfectly understand minor units would have defects like this but appropriate response is needed by the customers.
I had a very bad response from Sony Authorised Center at Anna Nagar.
Reply from Sony
Dear Sony Xperia Customer,
Greetings from Sony Xperia support.
We value the importance of your concern.
It is perturbing to note that your recent interactions with the Service Centre have not been upto your satisfaction.
We fully recognise that it is important for a customer to have a good experience with us the first time around so that we can reinforce the same as we go along.
We would request you to send the below mentioned details so that we can assist you in a better way:
1. Location and complete address of the Sony Service Centre (where your handset is submitted)
2. Latest Job slip/Work Order Number:
3. Place of purchase and date (complete address of the dealer)
4. Date when the phone was submitted
5. Your alternate contact number
If you need any assistance or clarifications, please feel free to contact Sony Xperia Support at the Toll Free number 1800-3000-2800 (Working Timings-9:00am to 9:00pm: Mon-Sun) alternately, you can email us [email protected]
For the latest news, information and product support please visitwww.sonymobile.com/in
Thank you for contacting Sony Xperia Support.
Always looking to serve you better.
Kind Regards,
Nisha Sharma
Sony Xperia Customer Services
My Reply back to sony and waiting for response
Hi Nisha Sharma,
Please find below the additional details Required
1. Location and complete address of the Sony Service Centre (where your handset is submitted)
Repair and Return Technology (India) PVT LTD,
2. Latest Job slip/Work Order Number: W114052602866
3. Place of purchase and date (complete address of the dealer)
Navkar Security Solutions (Sony Center),
#3, Arcot Road, Porur,
Chennai-600116.
Purchased on 21-05-2014.
4. Date when the phone was submitted - 26-05-2014
5. Your alternate contact number :
The response from the service center and the sony call center on 1800-3000-2800 is just a one liner
The litmus indicator turned red and the device is out of warranty, whereas the litmus paper will also change red if water entered through the phone body seal.
Please find the attached voice recording done at Service center by calling to sony service for reference.
This is not the response customer would expect after getting a Flagship model.
I can still prove the device to be a faulty unit by any of the following test
* Dry the phone completely. Place piece of litmus paper inside the flaps, close it securely, drop in water of just 5cm depth and we can see the color of litmus paper change due to water entering the phone via the body panel ( bottom left corner and near magnetic port)
* Do a suction test near bottom left corner or near magnetic port and we can feel the air getting through. I just did it holding it in mouth and **bleep** air inside and it did let the air through the panel.
Please inspect the device with your technician and let me know whether the device could be replaced under normal warranty. If not do not replace the device under accidental damage protection at this point of time. Return me the damaged device and I will proceed legally at consumer court at Chennai as I have already submitted the complaint form to the lawyer.The testing procedure may vary between regions so as above please contact your local Xperia Team for specifics regarding their testing process for liquid damage.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Upgrading from iPhone 5 to iPhone 6 Plus after Water Damage
My iPhone 5 fell in water back in October of 2014. I placed the phone in a bag of rice for 3 days
straight when it happened. It dried out fine and worked like nothing happened. Didn't matter I had
to upgrade to the iPhone 6 Plus anyways since it was released around that time. I decided to leave
my last existing backup on my computer (that I did before the phone dropped in water), and not backup
the phone after the water drop. Because the data could potentially be corrupt due to the oxidization of
components inside. Long story short I have the iPhone 6 plus now I got yesterday.
What I need to know:
My iPhone 5 still works but obviously it now doesn't have a working sim card. There are apps I wanted to
take snapshots of, or files I wanted to export from various places from after the water drop happened (which
I never backed up for reasons mentioned above. I already did a backup restore to the new iPhone 6 Plus from
the backup file made prior to the water drop. The iPhone 6 Plus is working flawlessly.
Can I use both phones at the same time with the apps going at the same time? Or will their be a weird
lockout conflict of sorts? Remember one phone has a working sim, but the apps will be the same as the
old phone and I don't want to use both at the same time if it will cause problems.It won't cause problems to use both. Of course without a sim card in the iPhone 5 it will be just a glorified iPod touch now and will have no access to cellular networks, sms, etc. But it will at least work, and any apps that can run over wifi will continue to work as before.
You might find an app like iExplorer (http://www.macroplant.com) useful for getting any remaining info off your iPhone 5 and onto your new iPhone 6 Plus. -
Due to a domestic incident, some water have dropped on my iMac.
I wasn't there, I don't know then what happened exactly.
What I know is that there were some water drops in the upper vent of the computer.
And when I introduced a tissue in this vent, I wiped a little bit of water.
There were also some drops of waters on the lower body of the computer, but I didn't notice anything in the plugs.
I haven't tried yet to start my computer.
What can I expect?
Is the iMac somehow protected against low runoff?
Is there a way to check that no water spread in the computer?
Is there a way to dry this water?
Thank you in advance for your answers although I'm not really optimistic.To start .. good choice to not start it. You should only start it or even have it hooked up to power after someone at Genius Bar gives an all clear.
You did not say if anyone reported pops or fizzles or if the unit was running and shut itself down.
If you are close to a Genius Bar, I would have them perform checks and let *them* open the unit. -
I can no longer use 3D commands in Photoshop CS6 Extended
I have Photoshop CS6 Extended (Ver 13.0.1x64). My desktop is Windows 7 64 Home premium; and Video card is: AMD Radeon HD 5570. The drivers and operating system is updated.
I have been using simple 3D functions like "New 3D extrusion from..." from time to time without any problems until recently. For unknown reasons now when I try to invoke any 3D command, I get the following message: " Could not complete the "New 3D extrusion from selected layer command because of a program error." This ,message gets repeated for any 3D command.
I checked out 3D functionality in Photoshop CS6 32 bit; and Photoshop CS5.5 Extended. Same problem. However, I can access and use all 3D functions in Illustrator CS6. Clearly, therefore, the video card is not the problem. It looks like one of the recent software updates from Adobe must have caused this problem.
Reproduced below are details of my system:
Please help!
Priyaranjan Desai
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 4
Processor speed: 2660 MHz
Built-in memory: 8191 MB
Free memory: 2569 MB
Memory available to Photoshop: 7234 MB
Memory used by Photoshop: 69 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Normal
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 5570
Display: 2
Display Bounds:= top: 0, left: 2560, bottom: 1200, right: 4480
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1440, right: 2560
Video Card Number: 1
Video Card: AMD Radeon HD 5570
OpenCL Version:
Driver Version: 14.100.0.0
Driver Date: 20140417000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 2560 x 1440 x 4294967296 colors
Video Card Caption: AMD Radeon HD 5570
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92278705978377249761
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Piyush\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 686.9G, 231.5G free
L:\, 2.73T, 2.18T free
S:\, 2.73T, 904.6G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt42.dll International Components for Unicode 4, 2, 0, 0
icuin42.dll International Components for Unicode 4, 2, 0, 0
icuuc42.dll International Components for Unicode 4, 2, 0, 0
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
ONCore7.dll ONCore 7.0.0.0
ONCore8.dll ONCore 7.0.0.0
ONCoreFoundation7.dll ONCoreFoundation7 7, 0, 0, 0
ONCoreFoundation8.dll ONCoreFoundation7 7, 0, 0, 0
ONDocument7.dll ONDocument 7.0.0.0
ONDocument8.dll ONDocument 7.0.0.0
onOneToolbox2.dll onOne Toolbox2 Dynamic Link Library 2.2.0
OnOneWidgets.dll OnOneWidgets dll 2.5
ONProxySupport7.dll ONProxySupport 1.0.0.0
ONProxySupport8.dll ONProxySupport 1.0.0.0
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0.1 (13.0.1.3 x001)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1.3 x001)
Bas Relief 13.0
BMP 13.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1.3 x001)
Clouds 13.0.1 (13.0.1.3 x001)
Collada 13.0.1 (13.0.1.3 x001)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1.3 x001)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0.1 (13.0.1.3 x001)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1.3 x001)
Embed Watermark 4.0
Entropy 13.0.1 (13.0.1.3 x001)
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1.3 x001)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0.1 (13.0.1.3 x001)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0.1 (13.0.1.3 x001)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
Histogram 2.1.3
HistogramCurves 2.1.3
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0.1 (13.0.1.3 x001)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1.3 x001)
Maximum 13.0.1 (13.0.1.3 x001)
Mean 13.0.1 (13.0.1.3 x001)
Measurement Core 13.0.1 (13.0.1.3 x001)
Median 13.0.1 (13.0.1.3 x001)
Mezzotint 13.0
Minimum 13.0.1 (13.0.1.3 x001)
MMXCore Routines 13.0.1 (13.0.1.3 x001)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1.3 x001)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0.1 (13.0.1.3 x001)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1.3 x001)
Photocopy 13.0
PhotoKit 1, 2, 11, 0
PhotoKit Capture Sharpener 1, 2, 11, 0
PhotoKit Capture Sharpener Expert 1, 2, 11, 0
PhotoKit Color 2 2.1.3
PhotoKit Creative Sharpener 1, 2, 11, 0
PhotoKit Output Sharpener 1, 2, 11, 0
PhotoKit Preview Helper 2.1.3
Photoshop 3D Engine 13.0.1 (13.0.1.3 x001)
Picture Package Filter 13.0.1 (13.0.1.3 x001)
Pinch 13.0
Pixar 13.0.1 (13.0.1.3 x001)
PixelGenius Toolbox 2.1.3
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1.3 x001)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1.3 x001)
Range 13.0.1 (13.0.1.3 x001)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Skewness 13.0.1 (13.0.1.3 x001)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1.3 x001)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0.1 (13.0.1.3 x001)
Sumi-e 13.0
Summation 13.0.1 (13.0.1.3 x001)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Topaz Star Effects 10.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0.1 (13.0.1.3 x001)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0.1 (13.0.1.3 x001)
Variations 13.0.1 (13.0.1.3 x001)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0.1 (13.0.1.3 x001)
WIA Support 13.0.1 (13.0.1.3 x001)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1.3 x001)
ZigZag 13.0
Optional and third party plug-ins:
Alias PIX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Alien Skin Autolayer 3 3.0.0 20463 2013-05-30 12:54
Alien Skin Blow Up 3 3.0.0
Alien Skin Exposure 5 Autolayer 5.0.0
Alien Skin Exposure 6 Autolayer 6.0.0
Alien Skin Eye Candy 7 Autolayer 7.0.0
Alien Skin Snap Art 4 Autolayer 4.0.0
Animal Fur 6.1.1
BackgroundFilter NO VERSION
Backlight 6.1.1
Bevel 6.1.1
Blow Up 3.0.0
Bokeh 2.0.1
Brick Wall 6.1.1
Brushed Metal 6.1.1
Camera Raw 8.6
Camera Raw Filter 8.6
Chrome 6.1.1
Color Efex Pro 4 4,05
Color Efex Pro 4 4,05
Corona 6.1.1
Dfine 2.0 NO VERSION
Diamond Plate 6.1.1
Drip 6.1.1
DxO FilmPack 3 NO VERSION
ElectricImage 13.0
Exposure 5 5.0.0
Exposure 6 6.0.0
Extrude 6.1.1
Eye Candy 7 7.0.0
FineStructuresFilter NO VERSION
Fire 6.1.1
Fisheye-Hemi 1 (Circle) [x64] v1.2.5 1.2.5.0
Fisheye-Hemi 1 (Circle) [x64] v1.2.5 1.2.5.0
Fisheye-Hemi 2 (Full Frame) [x64] v1.2.5 1.2.5.0
Fisheye-Hemi 2 (Full Frame) [x64] v1.2.5 1.2.5.0
Fisheye-Hemi 3 (Cropped) [x64] v1.2.5 1.2.5.0
Fisheye-Hemi 3 (Cropped) [x64] v1.2.5 1.2.5.0
Glass 6.1.1
Gradient Glow 6.1.1
HDR Efex Pro 2 2,03
HotPixelsFilter NO VERSION
HSB/HSL 13.0
Icicles 6.1.1
Imagenomic Plug-in Console 1, 2, 0, 0
Lighting Effects Classic 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Marble 6.1.1
Merge to HDR Efex Pro 2 2,03
Motion Trail 6.1.1
Nik Selective Tool 2.1.4.20903
Noiseware 2.3.0.9
Perfect Batch 8 8.5.1
Perfect BW 8 8.5.1
Perfect BW 8 Filter 8.5.1
Perfect BW 8 Smart Filter 8.5.1
Perfect Effects 4 4.0
Perfect Effects 4 Filter 4.0
Perfect Effects 4 Smart Filter 4.0
Perfect Effects 8 8.5.1
Perfect Effects 8 Filter 8.5.1
Perfect Effects 8 Smart Filter 8.5.1
Perfect Enhance 8 8.5.1
Perfect Enhance 8 Filter 8.5.1
Perfect Enhance 8 Smart Filter 8.5.1
Perfect Mask 8 8.5.1
Perfect Mask 8 Filter 8.5.1
Perfect Mask 8 Smart Filter 8.5.1
Perfect Portrait 8 8.5.1
Perfect Portrait 8 Filter 8.5.1
Perfect Portrait 8 Smart Filter 8.5.1
Perfect Resize 8 8.5.1
Perfect Resize 8 Engine Automation 8.5.1
Perfect Resize 8 Engine Filter 8.5.1
Perfect Resize 8 Filter 8.5.1
Perspective Shadow 6.1.1
PhotoFrame 4.6 Free 4.6.5
PhotoFrame 4.6 Free Batch 4.6.5
PhotoFrame 4.6 Free Hidden 4.6.5
Plug-in on new layer 2, 0, 4, 0
Portrait Professional 1, 4, 1, 0
Portrait+ 1.5.1.149
Portraiture 2.3.0.8
RealGrain 1.1.0.3
Reptile Skin 6.1.1
Ripples 6.1.1
Rust 6.1.1
SGI RGB 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ShadowsFilter NO VERSION
Sharpener Pro 3.0: (1) RAW Presharpener 3.0.10.20903
Sharpener Pro 3.0: (2) Output Sharpener 3.0.10.20903
Silver Efex Pro 2 2,006
Silver Efex Pro 2 2,006
SkinFilter NO VERSION
SkyFilter NO VERSION
Smoke 6.1.1
Snap Art 4 4.0.0
Snow Drift 6.1.1
SoftImage 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Squint 6.1.1
Stone Wall 6.1.1
StrongNoiseFilter NO VERSION
Super Star 6.1.1
Swirl 6.1.1
Texture Noise 6.1.1
Topaz Adjust 4 10.0
Topaz Adjust 5 10.0
Topaz BW Effects 10.0
Topaz Clarity 10.0
Topaz Clean 3 10.0
Topaz DeJpeg 4 10.0
Topaz DeNoise 5 10.0
Topaz Detail 2 10.0
Topaz Detail 3 10.0
Topaz InFocus 10.0
Topaz Lens Effects 10.0
Topaz photoFXlab 10.0
Topaz ReMask 3 10.0
Topaz Simplify 3 10.0
Topaz Simplify 4 10.0
TopazRemaskAutomate NO VERSION
Viveza 2 2.0.9.20903
Water Drops 6.1.1
Wavefront RLA 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Weave 6.1.1
Wood 6.1.1
Plug-ins that failed to load: NONE
Flash:
Paper Texture
onOne
Gallery Wrapper
Mini Bridge
GuideGuide
Kuler
Installed TWAIN devices: NONETo use "dictation" as it is called, there are two requirements:
1. Siri must be turned on (Settings > General > Siri)
2. You must be connected to the internet.
Maybe you are looking for
-
Printing through a Windows computer.
I'm working on a 1GHz Power Mac G4 desktop that is connected with Ethernet to a Linksys BEFW11S4 wireless router. The printer is connected to a Dell Dimension 4300 by USB. The question for me is, even though I can get the printer to show up in my pri
-
Safari won't open from new hard drive
i installed a new ssd drive and loaded the backup of my old drive from time machine onto it. everything seemed okay until i tried to open safari and nothing happens! anyone have any idea why this would happen before i try starting over? do you thi
-
My iphoto on desktop wont open?
How do I get iphoto to open?
-
How to Rename Pictures after they are Saved
Could not find out how to do this, but discovered it can be done by going to File Manager. But first you must know the current name of the picture and I cannot see how to find the name while viewing the picture. Any way to do this?
-
How to get the files from Time Capsule
Hi everyone. I have a old model of Time Capsule which is never used before. I just have finished the setup and now the Time Machine is doing backup. May I know that after the backup is done, how can I get the files (e.g. photos, mp3, video...) from t