No WiFi after IOS 7.1 update

This morning I updated my iPhone 5 to 7.1 and can no longer connect to ANY wifi.  I have restored the phone to original settings as instructed when connecting to iTunes, checked my home wifi password 100x's, restarted phone, tried switching to Airplane mode, and even went to Target to see if I could connect to the store's free wifi.  All were unsuccessful and I received the same message each time I try to connect to a network.  I have also tried reseting the Network Settings (Settings > General > Reset > Reset Network Settings), but nothing works.
My home network shows up in the list, I type in the correct password, and then receive "Unable to Join the network" error.
I've had the phone for over a year and never experienced any problems.  Do you know of any other settings I can change or other fixes?  I've tried all the basic/obvious fixes and don't have time to go in to Apple store.

Softbank does not unlock their phones.  You cannot use the phone in the Phillippines.  Buy another phone.

Similar Messages

  • No WIFI after iOS 5.0.1 over-the-air update on original iPad

    No WIFI after iOS 5.0.1 over-the-air update on original iPad. I have reset the network settings,  power off the iPad, trying static IP and nothing, it's unable to join my wifi network. anybody with the same issue?

    Great!  Thanks, this works.
    I have an old Linksys WRT54G in it I can select WPA Personal and AES as algorithm--it works for me (though maybe just changing to anything works!  but I will not try anything different since I have spent already so much time with this problem.)  Again, thanks for the solution Juan.

  • IPhone 6 screen freezes and can't find wifi after iOS 8.0.2 update

    iPhone 6 screen freezes and can't find wifi after iOS 8.0.2 update. Have to do a hard reboot. I am Extremely disappointed and lost ALL trust in Apples Quality Assurance. From now on I'll wait a week before I update.

    Hey there Shortos,
    It sounds like your phone touchscreen is not consistently working for you after updating to iOS 8. I can see how that would be pretty frustrating. It sounds to me like this could be a software issue or an issue with the screen itself. I would start with the troubleshooting in the following article to help troubleshoot the screen itself:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    If that does not resolve the issue, I would next quit all the running apps on the device:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Can't connect ad-hoc network after IOS 8.2 update

    Hi,
    This is my first post on Apple Discussion so please ignore grammatically and other mistakes if i made.
    I am using iPhone 5S 32 GB factory unlocked and working very well in INDIAN network.  I use to connect ad-hoc network created on my Window 7 Desktop via Wifi Surf-n-share Belkin USB.  It is working very well and connected always until i updated IOS 8.2.
    After IOS 8.2 updates, iphone couldn't connect ad-hoc network.
    Is there any bug for this issue or security update.??
    Help would be really appreciated.
    Awaiting some good response.
    Thanks in advance.

    Hi abidmomin,
    Thanks for contributing to the Apple Support Communities.
    It appears that after updating your iPhone to iOS 8.2, you're not able to connect to your Wi-Fi network.
    I recommend starting with the tips in this article to troubleshoot the situation:
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    Best Regards,
    Jeremy

  • After iOS 6.1 update no GPS? iPhone 3gs

    GPS fails after ios 6.1 update
    Tried three diff apps that worked hours before,
    All fail to respond to GPS speed etc?

    Hi
    I have also the same issue after update to 6.0.1 , 6.1 & 6.1.2 , the problem started from 6.0.1 in 6.0 was ok both GPS & wifi , after 6.1 the wifi has also issues in iphone 3GS!! Apple do something!

  • Iphone 4s keeps dropping wifi after ios 6.1.1 upate

    iphone 4s keeps dropping wifi after ios 6.1.1 update.....tried hard reset,reset networks,restored to new....... nothing is working....... apples update screwed up my phone and there support people told me no warranty nothing they can do.... just told how much it would cost..... really disappointed.

    Same problem here with iPhone 4S IOS 6.1.1, the wifi drops and I have to retype the password...
    I did all the things you mentioned and nothing...
    Any solution??

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

  • I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

    I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

        csdwarf,
    So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • IHome no longer works with iPhone 4s after iOS 6.1 update.

    My iHome no longer works with iPhone 4s after iOS 6.1 update.  Prompts message 'This accessory is not supported by iPhone'.  Has anyone come accross this and is there a fix?

    Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

  • My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

    my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

    UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

  • Problems after iOS 6.0 update with iMessage  and FaceTime

    After iOS 6.0 update i had problems to used iMessage and FaceTime

    Messages will almost send but stop right before completion. FaceTime will go through only after multiple attempts. After that iMessage will work for a little while. Have talked with folks at apple support but they did not have a solution. Have tried both closing out the programs as well as turning the iPod off and back on. Neither has solved the problem. Any suggestions would be great! Thanks for your help.

  • How do I get the contact photo to full screen size when receiving a call after iOs 7.1 update..?

    how do Iget the contact photo to full screen size when receiving a call after iOs 7.1 update..?

    I went to the link. I selected iPHONE.  There was a big iPhone icon above the comment box -- so I was absolutely, positively on the right page.  I spent five minutes or so crafting a constructive comment as to why I wanted the full photo feature back on incoming calls on iOS7.  Then...i noticed the box below the comment area asked 'What operating system are you on?'.  And the drop down selection list included every operating system since Job's garage days -- but not one single iOS entry.  No iOS entries on an iphone page.  Unless I'm missing something, I think anyone writing a feedback comment is wasting his/her time.

  • My iphone is not showing updates in appstore after ios 6.1 update p.why is this happening....

    my iphone is not showing updates in appstore after ios 6.1 update p.why?

    I have the same problem here, appstore still notice me that an app need to be updated, but when it opened, it wont shown up. Only white blank screen without any loading on update tab in appstore.

  • My wi-fi button greyd out after iOS 6.1 update. Any sugestions to solve this problem?

    My wi-fi button greyd out after iOS 6.1 update. Any sugestions to solve this problem?

    IOS: Wi-Fi or Bluetooth settings greyed out or dim.
    http://support.apple.com/kb/TS1559

  • No sound after IOS 4.1 update

    I really hope someone can suggest a solution. I updated my iPhone 3G to IOS 4.1 earlier today and since the I have lost all sound - no keyboard clicks, music or alerts. Has anyone else experienced this and could you offer a suggestion?
    Many thanks

    No sound for my iPhone 3G after iOS 4.1 update! Restored back to 3.1.2. Still no sound! (befor the 4.1 update, everything was fine).
    Then I reset all settings, sound came back. But then iPhone started to freeze randomly, with increasing frequency to the point I needed to restore again. This time back to iOS 4.1. And guess what - no sound! Resetted all settings. Still no sound.
    Key points:
    * sound loss is software issue that came with iOS 4. (i was able to get sound back after settings reset but only on iOS 3.1)
    * iOS 4.1 makes iPhone unstable both on 4.1 and earlier versions.
    * restore has no effect (I never restored from backup, started as a fresh phone)
    * iOS 4.1 destroys your iPhone 3G

Maybe you are looking for

  • After updating to ios 8.1, receive sms but can't open or send sms

    After I updating to ios 8.1, I can receive sms but can't open it or send sms

  • Import Warehouses via DTW

    I am trying to import the Warehouses via the DTW, but I am getting the following error. Update Failed Transaction Created by document was not found, 'Revenue Account'Application defined or object defined error 65171 Ive got the Revenue account number

  • 10.9.2 is so slow on a MAC PRO 2011

    OMG i took a chance and upgraded from 10.6.8 on my fully optimized MAC PRO on the IMAC 2012  things go faster what a fool i am why are things slower on the MAC pro and faster with the older system?? i repeat OMG

  • Color Laserjet 2605dn prints only grayscale in Windows 7

    Over the weekend I upgraded 2 PCs to Win7.  I downloaded the most recent Universal Printer Driver from the HP website (dated Feb 18, 2011).  The problem?  From some applications, the printer now prints only in grayscale.  For instance, all output fro

  • Class not registered - CrystalPrintControl

    I cannot resolve this error when running my ASP.NET application under IIS. It works fine on my development machine with the full CR for VS2010 install. The code lines concerned are: ISCDReportClientDocument foo = _rptDoc.ReportClientDocument; PrintOu