No Wifi network is ever searched in my e63. My Lap...

Been ages since I last used wifi on my phone.
When i go to menu>connectivity>Conn. Mgr.> Available WLAN networks , there's just one thing (no available WLAN networks) , or sometimes , once in a blue moon, my phone shows some random wifi from some nearby house.
What to do ? And how ?
Thanks.

You could try backing up essential data using Nokia Suite and reset device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user). Try device without restoring any settings in case of any possible corruption.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Mac can't search a particular wifi network

    My Macbook Pro is unable to search my office wifi network. The problem I am facing is happening with particularly this network.
    It can connect to all other networks in range, like I have connected my iPhone via personal hotspot. On the other hand, all other devices can search my office network too. I am facing this issue since last 2 days. Does it have to do anything with the upgradation to OS X Yosemite ?
    I have tried everything with my modem. I am tried of searching for this issue online, but it seems people haven't really faced this issue as yet.
    PS : This is affecting my work really bad, as I am restricted to my iPhone's tethered 3G network, that's really slow.
    Please, help me out of it.
    MacBook Pro (15-inch, Mid 2010)
    OS X Yosemite
    Version 10.10 (14A389)
    Processor :     2.53 GHz Intel Core i5
    Memory    :     4 GB 1067 MHz DDR3
    Storage    :     500 GB
    T. I. A.
    Anuj Goel
    [email protected]

    This discussion area is for apple routers actually.. and although it gives lots of problems it doesn't tend to not appear at all..
    You are posting in the wrong area.. since this is a laptop error or more likely a purely Yosemite issue..
    So lets see what we can do.. Not all wireless is created equal.
    Beetel (ADSL2 + Router)
    Please set the wireless in this router to a different name, short, no spaces and pure alphanumeric.... set to a fixed wireless channel eg.. 8 or 9 for 2.4ghz and turn off all wireless security. Especially you must not hide the wireless.. this is just a test to run for a couple of minutes.. then you can change the name and security back again.. it is to prove compatibility. This reduces the wireless to its lowest common denominator and if it cannot connect on these settings it never will.
    Reboot the Mac and scan for wireless again.. no luck I would say the Mac wireless is simply unable to connect to the particular wireless chip type in the Beetel.. The solution is to plug an Apple router into the beetel and use it in bridge mode.. and create a wireless network.. then the Mac will have less (cannot say No issues).

  • Nokia lumia 510 wifi network searching problem

    Recently I have got Nokia lumia 510......nice phone......but it fails to search any WiFi network......somtimes shows notifications at top of the display but doesn't wrk at ol..........So what to do.........help help

    Hi kabirx7,
    Welcome to the Forum.
    Could you check, please, if your wifi connection is turned on?
    > settings>Wifi> Wifi networking on.
    Pfrancoise.
    If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated.

  • Why do I have to search for a wifi network most every time I use the internet?

    Why do I have to search for a wifi network almost every time I use the internet?
    We have Cox internet on a wireless router.
    It doesn't seem to be able to hold the wireless connection.....even a couple hours.
    The router sits on the desk next to the computer.
    Thanks for any suggestions you have.

    I don't have any trouble connecting to the internet once I choose our network from the choices.
    The computer just can't remember it.

  • My WiFi network is not connecting ever since i went out of town how can I fix it?

    My WiFi network is connected on my PC but it would not locate the network nor be connected to my ITouch wat can I do to fix it, it did not work ever since I went out of town how can i fix it let me know soon thanks

    Try turning Wi-Fi Off/On from Settings, if it still doesn't show up try Resetting Network Settings on the iPod touch.
    You can also try unplugging the Wi-Fi router and then plugging it back in to restart it.
    WTH.

  • Ever since my update to Mavericks, my Mac mini won't connect to my wifi network. I reset SMC and still nothing. The error message reads that my WiFi network could not be joined, yet my iPad and Macbook can connect fine. Any help here would be great.

    I recently upgraded to Mavericks on my macmini and suddenly it won't connect to my home wifi network.  It says I need to move closer to my router whioch is really close and it worked fine before so I doubt this is the issue.  Also, my IPad and Macbook connect just fine to the network, so it seems like its localized to my macmini and now funny enough my IPhone.  I tried reseting SMC and PRAM, but this didn't help at all.  Any helpful suggestions?

    What does Wireless Diagnostics show?
    Wireless Diagnostics
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Also try turning off Bluetooth.

  • Why is my iPhone 3G be refusing to search for WIFI networks?

    I tried hooking up to my home WIFI network this afternoon. Put in the name and password and pressed go. I got a message that said "Could not scan for networks." Why is that?  BTW, it has hooked up in the past. Thanks!

    I solved this problem by turning the phone off and then back on. 

  • TS1398 Ever since I upgraded to iOS 7, my iPhone is constantly forgetting my wifi network connection.

    Lately, my iPhone has been getting dropped from my wifi network and more often than not, when I leave and come back to the office wifi, the phone will have trouble connecting, asking for the password again and again (which it should already know!).
    But now it will not connect at all. The wifi is working fine on my mac and the signal strenght is fine. I have gone through all of the steps suggested by Apple support and it still will not connect to the wifi network.
    Any help?

    Lately, my iPhone has been getting dropped from my wifi network and more often than not, when I leave and come back to the office wifi, the phone will have trouble connecting, asking for the password again and again (which it should already know!).
    But now it will not connect at all. The wifi is working fine on my mac and the signal strenght is fine. I have gone through all of the steps suggested by Apple support and it still will not connect to the wifi network.
    Any help?

  • TS1398 i had my iphone factory unlocked and ever since then i can join any wifi network?

    my iphone will not connect to any wifi network since i got it factory unlcoked

    The question is who did the unlocking? Your carrier or someone/some places?

  • TS1398 Since upgrading to ios6, all apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device. It's an ios

    Since upgrading to ios6, all the family's apple devices (new ipad, 2 iphone4 & itouch) are having difficulty reconnecting to the home hub wifi network. I.e, every time the lock screen comes on, the wifi connection is lost when you reopen the device and we have to reconnect through settings. This appears to be an ios6 software issue.
    Is there a solution to this wifi connection issue or do we wait for a software fix?
    I'd hate to think Apple is going down the Microsoft path, of passing untested software onto the user. What ever happened to Regression Testing, to ensure the existing functionality remains intact?
    I bought into the Apple dream, because it was intuitive, reliable & enjoyable to use, all the things that Microsoft windows isn't.
    Other issues we are experiencing are, Games are stuttering and the kids really miss the old YouTube app.
    Please Mr Browett, sort these issues out.

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
    ~~~~~~~~~~~~~~~~
    YouTube is not now part of iOS 6.
    However, you can go to the App Store and do a search using YouTube. You can download several YouTube apps: YouTube (for the iPhone, a IPad app is in work), several users  like Jasmine and YouPlayer.
     Cheers, Tom

  • I changed the channel on my Belkin Wireless router now my ipod touch 1G can't find my wifi network?

    A few hours ago I changed the channel on my Belkin Wireless router for the 1st time. It was either on auto, or channel 6 before, i'm not sure, but I changed it to 11, and now my ipod touch 1G can't find my wifi network. I tried changing it to 6, but nothing, and I also can't go back to auto. Can someone please help. I've already searched for the network, and it says "Cant find network". I've also restarted my router. I also added the MAC address, still nothing. Other than those things, I havent touched anything else. My ipod could connect before just find. My Wifi is not disabled, and it's not on private. I can connect with other wifi's fine. And I can connect to other networks with my ipod, I also held down the button on top, and the home button for 10 seconds to restart and nothing. I also reset my network settings. Please help!

    Find the documentation for your router and look up "Reset to Factory Defaults."  This process will put the router back to the way it was when you bought it.

  • How to extend a wifi network of third party router with TC 4th generation?

    After searching the communities for a while, I did not find a definitive answer on the following question:
    - I recently bought a 4th generation Time Capsule 2TB (MD0322/A), that I also want to use as an extension for our existing wifi network.
    - This wifi network is maintained by a Sitecom Wireless 300N XR Gigabit Router. Router is set to work over 2.4 GHz (B+G+N) because of several non-N-wifi devices in the network. The channel in use is currently 11.
    - This router provides so called WDS functionality, i.e. the ability for other wifi access points to act as a seamless extension of the basic wifi network (using the same SSID).
    - The security settings in the router are WPA2 Mixed, with a password in plain ASCII.
    - There seems to be no way to set different security levels for WDS-connections versus normal AP (access point) connections. If WDS is enabled, the security settings of the AP-mode are extended to the WDS connection.
    I have set the Sitecom router to enable WDS, and added the MAC-address of the TC in the configuration of this router.
    When configuring the Time Capsule, with Airport Utility 5.5.3, I can select the option to use TC to extend an existing network, and I can select the network of choice using the WPA personal or WPA/WPA personal security. However, the TC does not succeed in extending the network, and reports this back. If I manually configure the TC and select the network of choice, Airport Utility reports back that the selected network cannot be extended.
    I have read several times in other posts that Time Capsule can only connect to third party routers via WDS using WEP-authentication, but these posts were quite old. I was wondering if this is still the case, or that Apple has updated this functionality in newer versions of TC, and thus there could exist a trick to connect to a WDS using WPA.
    I really would appreciate suggestions
    Bram Bos

    gilles13 wrote:
    I have a mac and pc (win7) both are connected thru a network with wifi and allready two access pt.
    Airport can not be used to extend a WiFi created by a non-Apple box.
    You need to turn off the radio in the router (shut down the existing WiFi).  Purchase TWO Airport Express units.  Connect one to the router with an Ethernet cable.  Configure that one as your primary WiFi network and then use the second Express as the extender.
    You need to locate the second Express where it receives a decent WiFi signal.  Too far away and it has nothing to extend.  Too close and it doesn't buy you anything.  Before you plug in the second Express, check to see where the primary WiFi disappears completely.  My personal WAG is that you want to locate the second Express 2/3 the distance to that point.
    If you use Airport Utility to configure the units, it's a snap.  In fact, if you configure the primary first and the extender second, AU will default to exactly the settings that you want.
    By the way, I refereed to the Express because it's less expensive than the Extreme and you didn't indicate any need for the Extreme features.

  • Is there a way to set a default wifi network for my iPhone 5s?

    Hi,
    I have two networks in my home. When I first walk in, my phone automatically recognizes my extended wifi network.  But since I tend to spend most of my time in the back of the home, I rather have it connect to that network.
    Is there a way to change the default?
    And no, I can't move the AirPort Base or AirPort Express due to the way the cable is in my home.
    Thank you in advance (hope I used the correct terminology). 

    I have an Airport Extreme upstairs with my computer plus an Airport Express downstairs. They are both defined to be on the same network with Airport Utility. My mobile device use which ever one is giving them the best signal even when I am down in the basement.

  • How can I locate my lost iPod touch within my WiFi network range?!

    I am still using my 1st gen iPod touch from 2008 for apps and music and other uses.  I rely on it quite a bit although of course I have a separate cell phone for now (will eventually get an iPhone).  However, I synced it with iTunes right before going on a long shopping spree Thursday afternoon then hooked it to my car's stereo system to listen to as I often do.  Upon returning home, tired and with multiple bags, I was trying to juggle them all on several trips from my car to front door (about 30 ft.).  The iPod touch always picks up my WiFi network in my car as soon as I pull in, and with my hands full on my last trip I realized I'd forgotten to disconnect my iPod touch so I could bring it in too.  I'll admit I was getting bogged down and annoyed so I disconnected it then remember also dropping some bags and picking them up from the parking space.  An hour later, after finally getting most bags and myself at least somewhat settled, I remembered I hadn't reconnected my iPod touch to its JBL docking system.  I soon realized I couldn't find it in the house and went with a flashlight to look in the car and outside between the house and car.  I searched for hours in all likely places and again the next day.  I also thought about an hour after losing it to check AirPort Utility's advanced pane which includes the logs, wireless clients and DHCP clients.  Sure enough it was still picking the device up, every 30 minutes or so periodically showing "binding added" and "binded dropped" for my iPod's IP address via NAT, and also "associated with" and "disassociated with" the iPod's unique MAC address.
    My worst fear was that I dropped it outside and someone dishonest took it, but that seems unlikely because I really don't have those kinds of neighbors and I searched immediately for it everywhere it could be (in my car, under it, outside everywhere I walked, in the house in the oddest places like under furniture, in discarded shopping bags, the trash can and even the freezer!  Sure enough, for 13 hours AirPort Utility showed activity contacting (or detecting) the device as mentioned above, until about 9:30 the next morning.  Since then there has been no log activity detected, and the device itself listed with MAC address has also disappeared under the "DHCP Clients" pane of AirPort Utility. I realize this could simply be the battery dying after all this time (although it should be in sleep mode), but the point is it was close by for all that time even after I'd searched for it, so it is unlikely someone found it easily after I searched everywhere I'd been in the short distance from parked car to home.  It also has a black rubber "suit" so the entire thin 8GB device is thin and completely black all over, further disguising it, especially at night.
    My question is that since this is not an iPhone and I cannot "call it" to find it, and it is only a 1st gen. iPod touch without a built-in speaker to make loud noises unless hooked to headphones or a line output, how can I find it?  It does make the tiny super high-pitched digital beeps when I get a "push" notification but I don't see how that does me any good unless someone from an app I use tries to contact me while I'm in extremely close proximity to hear those faint tones. Anyway, I really do need it and it's driving me crazy knowing it is within such a short range from me either inside my house or car (or outside in a short straight path from car to my doorstep) yet I am helpless.  Is there anything anyone can suggest?  It's almost worst than knowing I lost it anywhere, because I know it's here, but want to find it soon before someone else does (if outside) or the trash gets thrown out (if it fell in there) or it gets run over if on the street somewhere I missed. 

    There is no way to automatcally locate it.
    Since WiFi does not travel far talk to your neighbors. Perhaps one of them (or their children) found your iPod.
    If this does not work make a more thorough search of your house to find it.

  • TP Unable to See Wifi networks for more than a few seconds

    I've read a bunch of wifi related posts on these forums but none seem to be the same problem as mine.
    My touchpad rarely, if at all, sees any networks. If it sees my network it usually loses it before I have a chance to finish typing in the password. I can wait, sometimes up to 20 minutes for it to finally see any networks again and try to login again only to have it lose it and start searching for networks.  Manually typing in the network tells me no network with that name can be found. I managed to set my android phone up as a hotspot (without any security) and connected to it long enough to get through the setup and reboot, then it was back to not seeing any networks, not even my phone.
    Things I've tried:
    - Sitting 2-3 feet from the router
    - New router (bought it the same day I got my TP)
    - Disabled all security
    - Tried setting router to 802.11b only, g only, mixed, different channels, rebooting router
    - MAC filtering is not enabled
    - Resetting the TP (power + home) sometimes gets me a connection for a few seconds.
    - I have 2 android phones, 2 laptops, a home theatre, and a wireless printer that can see my network and my neighbors networks all the time and have no problems getting and staying connected.
    - Did the 3.02 upgrade by usb to my computer
    - Toggled wifi, toggled airplane mode
    I called support and had my TP sent in for warranty. I received a new one (serial number and MAC addresses are different so it is a different device), but it's doing the same thing.
    I called support again and did all the usual troubleshooting and the guy felt like I do, very confused how it's losing ALL networks so often. I'm taking it to work where there's an open wifi network I can test it with and do the 3.02 upgrade (new TP came with 3.0 installed).
    Has anyone else run into this? Is there a bad batch of TPs with faulty wifi chips or antennas? Is the TP just not compatible with my Cisco E1200 router (and causes it to stop seeing all networks?)? Does anyone else have any ideas? I'm at a loss and find it hard to believe having this one exchanged as well will be any different.
    Thanks,
    Brad
    Post relates to: HP TouchPad (WiFi)

    Are you broadcasting your SSID? Sometimes this can cause a problem connecting. Is this Cisco router running any turbo modes or special preparatory protocols.
    There are no know issues with Wi-Fi connectivity except on first connection; and the chance of 2 devices having the exact same issue is very unlikely. This sounds like something to do with your wireless router.
    Have you tried to connect to another Wi-Fi hotspot elsewhere?
    Do you have any 2.4 GHz wireless phones or security system that could interfere with connection?

Maybe you are looking for

  • Complex Payment term???

    Hello Experts, Can anyone suggest how do I configure the following payment term: Net 34 End of Month: i.e. Payment is due net 34 or end of the following month. Basically it means that if the Net 34 does not coincide with the month end then the due da

  • External .swf into a flash presentation

    Hey guys and girls! I got a question here. I made a small flash intro 2 weeks ago and saved it into a .swf. Now I am doing a flash presentation with many slides for a client and I want to put the intro into the first slide. I am doing a symbol/movie

  • I can't logon iTunes following recent update

    Have done everything, including Reset and Restart and turning on and off the power..  I just get the message "cannot connet to Itunes Store".  I can logon to icould, so no problem generally with connection (ethernet).  Anyone else having this issue?

  • I just installed photoshop but I dont know what is wrong it keep shutdown itself.

    dunno whats wrong. keep shutdown itself.

  • Planned order does not schedule as per Recipe

    Hello, I am working on ECC 6.0 at client site & need your help. The recipe with all the relationship between various phases/ operations well defined has a total production time of around 2 months. As the client wants planned order to read recipe lead