No wifi signal after 3.1 update

Any one else having wifi issues after update? After update keeps changing from 3g to wifi but with no signal and before update always had good signal in my house.

nothing you can do about it really. i hate it also. it *****!

Similar Messages

WiFi Signal after 2.1 Update

It appears that my iPhone’s WiFi reception has degraded a bit since the 2.1 update. I noticed in my house and at a Starbucks that my signal is less than what it was prior to the update. It still works but just showing less of a signal. Not much to go on, but I’m just curious if anyone else has noticed this.

My iPhone has always only shown 2 (out of 3) 'bars' of WiFi reception at home, even when I'm sitting right next to my WiFi router. However, speed has always been excellent. On other WiFi networks it frequently shows full WiFi 'bars' so the problem (if you can call it that) must be something to do with my router but since it's not affecting speed I can't really bothered to investigate further.

Wifi problem after.4.3 update on xperia z

Hi all,
After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
Here's the problem in detail:
When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
Regards,
Danny
Sony Xperia Z
Modelnumber: C6603
Android version: 4.3
Kernal version: 3.4.0-ge09aff8
Build number: 10.4.1.B.0.101

I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

Why did I loose the wifi signal after upgrading?

I want to know why did I loose my wifi signal after updating my Iphone

Have you tried rebooting the Iphone?

Very weak wifi signal after updating to iOS 7.0.5

I am in Malaysia, and received notification to update software to iOS 7.0.5 a couple of days ago. Since the update, i keep losing wifi signal in the house, which did.not happen before the update. Even when connected to the wifi, the signal bar shows 2 while my other iPhone 4S and iPads are showing full signal strength.
Please advise how I can rollback to the previous version, as i have just realised this new update was meant for China.
Please help! Thank you.

My problem exactly! With Iphone 4! The updated phone will not connect, the other Iphone 4 not running this latest update works fine! Come on Apple!! Need a fix yesterday!

WiFi fails after 2.2 update

After 2.2 update
Wifi analyzer Sees my Router as Strong Signal
If I actuate WiFi, it connects to my Router/SSiD
WiFi Icon is on the Top Bar
When I open the Browser to go to a web page, the WiFi Icon disappears and The Screen shows Web Page Unabailable.
Then the Wifi Icon comes back but the web page is still unabailable
If I try to navibate to another Web Page, the Wifi icon again disappears etc etc
When I leave WiFi off, the browser opens web pages nicely and I can watch News casts with some pauses for buffering.
Pre 2.2 I could not watch the News casts but the wifi would bring up web pages rapidly.
Any Assistance will be appreciated.

jmccoy70 wrote:
New Netgear WNDR3700 router.
Power Cycled the Router
Factory Reset the DX per Directions Posted here on this board,
Set up a Guest Account with No Encryption on the Router.
Went into WiFi settings and attached to the Guest account
Still in WiFi Settings, watching the SSID cycle between "Connected" and "Obtaining an IP address from Guest Account"
Any Thoughts or assistance will be appreciated.
I also have the WNDR3700 router. And had the same DroidX WiFi connect/disconnect issues.
I did not try the Airplane fix but I was able to correct my unstable WiFi Connection by going into the 3700's setup and disabling (unchecking) UMM for both the 2.4ghz and 5ghz bands.
You will find UMM under QoS Setup within the router's setup.
I have tested both encryption (AES) and Open Security and the WiFi Connection remains connected.
My DroidX did not seem to be happy with UMM enabled.
If anyone corrects their unstable WiFi Connection by disabling UMM on any router, please share your results. Thanks!

IPod 5th Gen doesn't find any WiFi signals after battery was dead for two days.

I recently bought an ipod 5th generation, it only has the selfie camera (no back camera).
My battery then ran out, and my iPod was dead for two days.
My iPod charging cable wasn't working, so i went out to buy a new one.
After charging it with the new cable, it would not connect to the internet.
My brother has a 4th generation ipod and his picks up and connects to the wifi signal we have here at home, but mine won't even pick up the signal, or any wifi signals period.
I looked around here on the Apple Support but found nothing that helped, I already reset my network settings.
Is there any way to fix this?

If not this
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why won't my home wifi work after jelly bean update?

My phone updated to jelly bean on tuesday morning, and i noticed i cannot connect to my home wifi. It will connect at school or work however. I have tried turning off and on my phone and my router. I know its not my connection because my other devices all connect to it. When i go to the wifi on my phone, it detects my home wifi with a full signal, but when i put the password in to connect, it says the signal is poor and it just repeatedly tries to connect. Is there any way that i can get my wifi to work again? If i have to and if there is a way i will uninstall jelly bean if thats the only way to get it to work again.

Here is my current situation with a brand new Razr HD:
-Linksys WRT54GL with updated firmware
-New Razr HD purchased 5 days ago
-System Version: 9.16.6.X926
-Android Version 4.1.2
-Build Number 9.8.1Q-62_VQW_MR-2
My Mom got the same phone at the same time and has dropped calls, poor wifi signal and range, etc.
I have fully set up my phone with apps and all settings perfect, cleared the system cache, one factory reset and input all app usernames and passwords again, etc.
My phone is perfect, except for not connecting to wifi in a room downstairs from the router where all other devices, a Nook, 10-year old DELL laptop, and Droid Incredible get 4 full bars of wifi strength. This Razr does not connect at all and rarely if it does when I leave the door open gets one bar of strength and is useless.
I love the phone so much I am reluctant to swap it out and lose all my app settings and customization. I read that it isn't mattering if you swap it out, still the same problem. But it's bothering me and I want it right so I went to the Verizon store today to test it and swap it out for a new different one. They don't perform tests and didn't know what I was talking about. Very abrasive staff and manager tried to research the issue for a half an hour, then said they had a call in to Motorola. If I wanted to swap it out I could but that would be my one swap and that's it.
I have actually spent so much time and effort on this I wanted to get a MAXX HD for my wasted time and frustration. That is simply out of the question. I stood there with my phone connected to the Verizon wifi network in the store with one bar of wifi strength, while the display connected to the same network showed a full network signal all bars.
They were so abrasive, demanding that it doesn't matter how many wifi bars you get it will still connect to the Internet. I said no that's not true this device will not connect in my bedroom while all other old devices get full wifi strength. They didn't care.
They were so reluctant in the matter that I decided to walk out and watch for an update to Jelly Bean to solve the issue. People are taking their phones back and it doesn't fix this. It seems to be strictly a Jelly Bean update fix.
I will watch my phone, only use wifi in large areas that usually work fine, etc. My question is: When will there be a Jelly Bean update pushed out to Razr HD owners on Jelly Bean so they will have comparable wifi and signal strength to every other wifi enabled device that exists?
Thanks
PS. I have tried every single router and phone setting mentioned on any forum. Same thing. This requires a 2nd update.

Weak 3gs wifi signal after upgrade to ios6

Anyone experienced the same thing after upgrading their 3gs to ios6?
I noticed that wi-fi signal became weaker.
I am on the same spot inside the house and the 3gs cannot detect my connection.

I have the same issue since I upgraded to iOS 6. My 3GS (end of 2009) has extremely weak WiFi signal from areas I used to get very strong signal. I now need to be within 12 inches of my home WiFi access point for the phone to pickup the signal. And the connection drops as soon as I am getting more than 12 inches away.
Same behavior from our WiFi at work -- I can no longer connect on the corporate WiFi from my office space!!
I also went to the Apple store in San Jose, and the phone was not even able to pickup the Apple WiFi signal from the middle of the shop!!! This very same phone was working flawlessly on 5.1.1 before the iOS 6.0 upgrade. I tried all the tricks people said to no available. Nothing works. My phone is useless now because of Apple!! Isn't this a trick to force people changing to newer phone?? Now I am using too much from my 3G plan and it will cost me moneys because of this..
Apple starts to look like a Lemon to me..

Very weak wifi signal after i change the battery

i recently change my playbook battery. everything seems perfectly okay except that i have a very weak wifi signal reception. i need to be very near the router just to have the signal. i dont know what went wrong during the changing of battery process but everything is okay except the very weak wifi signal received. please help.

Looking at the photos in crackberry forum it's the white antenna cable, antenna is top RH corner as you look at the screen. There may be an antenna component inside the back (according to ifixit) but the cable terminates in a little pcb possibly marked 3G. Blue cable seems to be BT and grey is GPS. The TI chip supports all three functions, single cable for each. That is why 802.11n is only 65mbps.
Come back if that's not correct.
Thanks to crackberry and ifixit if it is.

IPhone 3G WiFi problems after 2.2 update

I know that this has been raised already, but I just wanted to throw some more wood on the fire.
I have several machines wirelessly connected to my router, and all work fine. iPhone WiFi worked every time before update to 2.2, no longer does.
I have done all of the suggested "fixes": power on/off, forget network, reset network settings. They don't work.
What's strange is that the iPhone connects to the network--but it only has 2 bars, even when I'm right beside the router! And even when it's "connected", I can't browse the net through Safari or use any other programs that require internet access.
Connections to other WiFi networks do the same.

Sorry, I missed your last sentence in your original post.
I wouldn't wait until firmware 2.3 is released. I've had no problems connecting my iPhone to my wireless network at home, the wireless network at my office, or the wireless networks that I regularly access at a couple of restaurants that I frequent, and the same with an AT&T wireless network at a Starbucks that I stop by on occasion since installing 2.2.
Copied from my previous post:
+Have you also tried an iPhone reset and/or restoring your iPhone with iTunes - from your iPhone's backup and if no change, as a new iPhone or not from your iPhone's backup?+
+If so, I suggest giving AppleCare a call at (800) 694-7466, or make an appointment at an Apple Store if there is one nearby.+
I'd just like to make sure that Apple is aware of the issue.
Providing it here does not ensure this. Although these discussions are provided and moderated by Apple, each post and thread here is not read by a moderator or by any Apple employee.
Calling AppleCare ensures that Apple is aware of your particular issue, and if a reset and/or a restore from your iPhone's backup and as a new iPhone or not from your iPhone's backup does not change anything, then your iPhone may have a hardware issue that 2.2 brought to the surface and if so, your iPhone will be exchanged under warranty.
No point in waiting for a future firmware update with no way of knowing exactly when the next firmware update will be released, nor if it will resolve your problem especially if this turns out to be a hardware issue.

Unable to autoconnect to Wifi network after installing Windows update 8.1 - Toshiba Satellite - Intel Pro/Wireless 3945ABG-netwerkverbinding

Hello, got a problem connecting to my wifi: every time I start up my Laptop (5 year old Toshiba Satellite L300) the wificonnections are listed but windows is unable to connect to the WIFI. Wificonnection states unable to connect, after running Windows Network
Control the issue is found en the WIFI connects correctly.
I need to run the troubleshooter every time after staring up windows in order to get my wifi running, this is rather annoying..
Does anybody have a solution? I downloaded and installed the latest driver from intel, and also tried to enter below without any improvement.
netsh winsock reset catalog (reset winsock entries)
netsh int ip reset reset.log hit (reset TCP/IP stack)
see below error report:

Hi,
With the google translate, It seems that you are facing with the following problem:
A network cable is not connected correctly or may be damaged
Problem with wireless adapter or access point
For this issue, I suggest you try the following steps:
Try with another account, or test with another system, another cable.
Reinstall network adapter.
Open Device Manager then Network Adaptors, find the wireless NIC and choose properties then open the power management tab and uncheck the one that says "Allow the computer to turn off this device to save power".
Test this issue in safe mode with networking
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode
Does this work? and I would be appreciate if you could update the diagnostics with English.
Regards,
Yolandac

HT204053 Setting up my wifes ICloud after a software update and it merged out contacts, how do I unmerge the contacts?

My wife's Iphone 4 had the latest software update. After the update, it asked to back up to the ICloud. Doing that it asked for an Apple ID, and I used mine, as she hasn't purchased anything from ITunes, and didn't have an ID. After the setup, it had merged our contact list. I want to know how to unmerge our list.

Of course it did if you signed her into your account. You can only unmerge them manually, one by one.

Video Chat: bad wifi connection after OS2.0 update

Hi, I have 4 playbooks, one for myself and three for my family living oversea. I bought three playbooks for my family for video chat. It worked fine (except huge e-mail problems=another issue) until I updated to OS2.0 one month ago. I have following problems after OS2.0 1) Video chat program cannot always on to wi-fi and to receptible the incoming calls. When I know I am receiving or calling, I have to restart playbook or / disconnect wifi and connect again to establish the wi-fi connection for the Video chat. (while I am having this problem I can use internet without problem) 2) When I was in the older OS before OS2.0 it did not have this problem. Once established the wifi connection, it does not disconnect wi-fi so soon like this new OS2.0. I need help for 1) Is there any way to solve this problem? for 2) I'd rather go back to my old OS system. I searched every where for the old OS (OS1?) but I could not find it. Please let me know how to go back to the old OS system. I appreciate your help. Thank you!

You can't, not without hacking it anyway and we don't go there.
There's just over a million playbooks working fine on 2.1 so I would look elsewhere for your problem. Try reinstalling 2.1 latest vis desktop.

Weak Wifi signal after upgrading Iphone to 4.1

I had a perfectly working Wifi home connection on a new iPhone 4 running 4.01 and 4.02.
After upgrading to 4.1 yesterday, the wifi has gone bad: the connection strength has dropped - at least- 10 fold. I have to stand next to the router to get connected. Before I had excellent connection at long distances.
Nothing has changed to the router, and I still have excellent wifi connectivity with my MacBook, iPad, and another iPhone.
Seems that the upgrade to 4.1 somehow broke the wifi connectivity.
Help!
S.

I am experiencing hte same thing. Except I started with 4.1 and I am getting very weak signal compared to my buddies iPhone which is also running 4.1. Which is weird .. I guess I will call in tommorow any ideas ??

No wifi signal after 3.1 update

Similar Messages

Maybe you are looking for