No wireless keyboard connection after installing lion

Before installing the lion, everything was working perfectly; my keyboard, mouse and trackpad. Then after installing the lion, the keyboard could be detected, but not be connected. What should I do?

It works fine now whit out any setting .I just plug the apple keyboard(wire) and try to do the set up .it (Wireless keyboard) connected automatic .so still need the wire keyboard around for few days and see .thx

Similar Messages

  • Local NAS not connecting after installing Lion, what is the fix ?

    After installing Lion, my local NAS is not connecting, what can I do to fix it.

    I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
    Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
    I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
    I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
    Hope it helps you.

  • Wireless Keyboard problems after Installing OS 10.5.8

    I've been using an Apple wireless keyboard with my G5 (PPC) running on OS 10.4 for about three years without any problems. I upgraded to Leopard 10.5.8 a few weeks ago and immediately lost my bluetooth connection. I installed new batteries, trashed the com.apple.bluetooth.plist, reinstalled the software, and the problem still persists.
    I removed it from the list of Bluetooth devices with the intention of reinstalling it as a new device, but every time I try to add the keyboard via the Bluetooth Setup Assistant, the name of the keyboard shows up but it does not pair.
    Does anyone have any ideas or solution to my problem? I would greatly appreciate your help.

    Barry,
    I installed the firmware 101 because the computer says 201 is not required on this computer.
    It finds the keyboard only if I turn the power switch (with the green light at the bottom of the keyboard) off and on repeatedly. This time, it gives the keyboard a new name (Apple Wireless Keyboard). I continue to the nest step, which is pairing. again, after switching on and off, it gives ma a passkey. the little spinning circle that indicates a job is being processed, continues to spin. I enter the passkey #. Eventually the Following error message appears:
    "The pairing attempt was unsuccessful. If using a passkey, make sure you are entering it properly on your keyboard. When ready, click Continue to try again".
    On two occasions, the Keyboard showed up with the other bluetooth devices but disappeared within a second, and the error message appeared again.

  • Intermittent internet connectivity after installing lion

    I installed lion on my macbook pro a week ago and my internet connectivity was working fine up until now.  At this point when I start up safari, it will connect and work for about 3 - 5 minutes and lose connectivity.  I have two other laptops (windows os) and they do not have a problem with holding their connection to my router.  Any advice in the basic terms would be greatly appreciated.  Oh......my mac says that it is connected but its not.
    Jimmy

    I did search and couldn't find the answer but in fact I got a tip, and finally found the solution.
    My problem is with AVAST, actually the Webshield.
    So the solution has been to stop the Webshield (which also stops the Mailshield) but still keeping Avast running with the Fileshield.
    Not bud to keep this discussion, people can find the solution in the 2nd answer and no need to spend hours looking through hundresds of posts.

  • Wireless printer issues after installing lion OS

    Since installing the Lion Os on 13th September 2011, I have experienced intermittent wireless printing problems.
    When you try to print the printer icon comes up with an error, and the message is 'the printer is not connected'. The printer is on and wiFi is lit up. Sometimes by cancelling the print job and then requesting it again clears the problem. When I access the printer in the settings pane it is there and showing idle with a green light, but when you try to print the connection goes.
    Sometimes I have to input the administrator password and then it will print. Other times that will not work and I have had to delete the printer and re install it. The problem still exists though.
    It exists on all user profiles on the iMac (4)

    I have the same problem. I have checked for drivers, and just a couple days ago an updated driver for my printer came through the Mac's Software Update, but it didn't fix the problem. I'm seeing a lot of people with this problem, with different routers and different printers since Lion came out, so I'm fairly certain it's a Lion problem. I hope someone comes up with an answer soon, or I might just break out my PC...

  • Can't get wifi connection after installing lion osx

    I upgraded my OSX to Lion, and ever since i am unable to pull a connection to my wifi, neither at home nor at work. I have tried almost everything... I even reinstalled all of my software and NADA..... And needless to say it took me the whole saturday to do it, since it is recommended to start with the Discs that originally came with the computer..
    I´m on the verge of hating my computer!!!
    PLEASE HELP....

    While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • Why can´t i connect to Windows servers after installing Lion?

    Why can´t i connect to Windows servers after installing Lion?

    Me too!
    MacBook Pro 15" 2011, OS X Lion 10.7

  • After installing lion, my computer is running slower and having delays connecting to network

    please help me resolve my problem.  after installing lion my system was running great for about a week.  suddenly it is having trouble connecting to the internet, running slow and the history pages are appearing without asking for them..  unable to get my homepage when opening up, just get a white screen. if i go to the history, i can get the homepage.  Only able to access my homepage by waiting for ever or getting it from the history.
    please help

    Peter, thank you for responding.  No, I am not referring to the initial start up.  I downloaded Yosemite over a week ago and feel it is running very slow when switching websites.  Also, I have experienced numerous hangups causing me to force quite much more than before.
    I just cleared my Safari history (I am guessing that is what you meant by "clean the old internet-caches" and restarted Safari.  I will see how it goes.
    I uses a file called "Desktop" from my IPhoto library for my desktop pictures. It contains about 20 pictures.  I configured it that way in Preferences, but it seems whenever I shut down and restart my computer it reverts to the generic picture of Yosemite.  As for the question mark and "Update Needed" showing on my startup log in screen, I think I fixed that by changing my password in Preferences.
    No that I have cleared the Safari history, I will see how things go.

  • Hello! after installing lion my iPhoto crashes everytime i connect my iPhone?

    hello! after installing lion my iPhoto crashes everytime i connect my iPhone?

    hello! after installing lion my iPhoto crashes everytime i connect my iPhone?

  • Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help Apple support team!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B...)

    Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

    Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

  • I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

    I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
    After +/- 10 to 15min my connection is gone.
    Does anyone have a sollution?

    Lots of people are having the same problem, you're not the only one, belieeeeve me.
    Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
    It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
    So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now.  I already posted  a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
    i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
    Site:
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • Problems conecting to wireless network after installing Lion

    Has anyone had problems conecting to thier wirless network after installing lion.

    Has anyone had problems conecting to thier wirless network after installing lion.

  • Having many problem with wifi....after installing lion......

    Having many problem with wifi....after installing lion......it connect with wifi but not with Internet and at the same time iPad 2, iPhone 4 works smooth......help......I have MacBook air without thunderbolt and mac mini

    I had the same problem last night. Boot into OSX and reboot the router - fine. Boot into Windows and wrong. Here were my fixes:
    Firstly, I kept all the settings on my router solid. Just leave them as they are. Boot into OSX and check the Network settings and make a note of your IP address and the router's IP address.
    Second, boot into Windows, then open up your wireless connection settings and navigate through to the properties where you can set the IP address.
    Third: Set the IP address to your routers IP address changing the last set of digits to a value between 5 and 255 (I have 8 devices so I set the last two digits to 10.) This will keep the IP static.
    Tab through the Mask settings to default those.
    Then set the default gateway to your router's IP address.
    Check that the Network Adapter's setting has IPv6 disabled (uncheck the box)
    Finally: Set the primary DNS server to 8.8.8.8 then the secondary to 8.8.4.4 and then reboot the router.
    That's what got my connection running.

  • Time capsule problems after installing Lion

    After installing Lion, I need to regularly shut down iMac(Intel) in order to have Time capsule do the next backup. This method allows me to manually back up the automatic function to back up no longer exists. Also unable to connect to the backup disk.

    Mine needs backing up immediately after its just backed up!! Its crazy!! IOS5 was supposed to be free but as a result I had to pay to upgrade to Lion then I had to pay to upgrade to iPhoto 11 just to be able to transfer photos from my iphone!! On top of this, Lion runs as slow as a PC, asks to backup constantly, I'm losing iDisk and iWeb next year and they've removed the bounce facility from Mail. Blinding. Well done Apple - who's brainwave was Lion and IOS5? Bill Gates?

  • Trustme.app ? - Multiple occurrences in launchpad after installing Lion

    After installing lion multiple occurrences of this app in Launchpad have appeared.
    I've never seen them before.
    What are they?
    Clicking on it pops up a message saying that the app cannot be opened because of a problem, and to check whether it is compatible with this version of osx.
    The report it wants to send to apple has the following info:
    Process:         TrustMe [2919]
    Path:            /Applications/Xcode 3/*/TrustMe.app/TrustMe
    Identifier:      com.apple.TrustMe
    Version:         ??? (???)
    Code Type:       X86 (Native)
    Parent Process:  launchd [116]
    Date/Time:       2011-07-22 22:29:20.993 +0530
    OS Version:      Mac OS X 10.7 (11A511)
    Report Version:  9
    Interval Since Last Report:          94631 sec
    Crashes Since Last Report:           3
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      remove the uuid myself
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/Frameworks/UIKit.framework/UIKit
      Referenced from: /Applications/Xcode 3/*/TrustMe.app/TrustMe
      Reason: image not found
    Binary Images:
        0x1000 -     0x9ff3 +TrustMe (??? - ???) <238775E7-45A0-A3E6-CF16-1FE5C45AC5C3> /Applications/Xcode 3/*/TrustMe.app/TrustMe
    0x8feb9000 - 0x8feeb9c7  dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
    0x95e03000 - 0x96106ff7  com.apple.Foundation (6.7 - 833.1) <94BFFEDD-0676-368D-B4C6-8784E1DA4306> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.8 GHz, 4 GB, SMC 1.58f16
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.100.98.75.6)
    Bluetooth: Version 2.5.0f17, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK5055GSXF, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

    I am having a similar issue, but in my situation, my users cannot log in.  All of my users are network users on Mini's.  I am running 10.6.8 on my server.  I have created users before with no issues, but have not done so in months.  When I try to log the new user in, I get the following error:
    xpchelper: Could not get path of user account (uid:1029) home directory:/Network/Servers/server.xxx.net/Volumes/Data/Users/username; error; The operation couldn't be completed. No such file or directory. Using home directory.
    CFPreferences: user home directory at file://localhost/Network/Servers/server.xxx.net/Volumes/Data/Users/username/ is currently unavailable. User domains will be volatile.
    Authorizationhost: error |-[homedirmounter mount NetworkHomeWithURL: attributes: dirPath: username:]|PremountHomeDirectoryWithAuthentication (url=AFP://server.xxx.net/Users/homedir= /Network/Servers/server.xxx.net/Volumes/Data/Users/username, name=username) returned 5.
    I have no idea of what to do.  I have verified that the user looks the same as my other users in WGM. The user's folder was created on the server.  The user has access to the folder.  I'm not sure what else could be wrong here.

Maybe you are looking for

  • Application changes for RAC

    We are having 8 different applications supported by a single instance database with 8 different schema  for each of these applications. We are planning to move these schema to a oracle RAC environment for high-availability reasons. While I am very co

  • RAW-Converter für Olympus OM-D?

    Photoshop elements 8 - unter Mac mit der Bridge von CS4 - erkennt nicht mehr die RAW-Daten meiner neuen Olympus OM-D. Den RAW-Converter von Olympus selbst finde ich etwas sperrig, und den Umweg über den Adobe dng-Converter ebenfalls. Deshalb habe ich

  • Archive Utility Crashes

    It doesn't matter what ZIP file I'm trying to open Archive Utility will lock up and I'll get the "Application Not Responding" notification. Any solutions? OSX 10.10.3 MacBook Pro (15-inch, Early 2011)

  • Authorization version bw 3.5

    Hi experts I need to create a profile so when the user enters the report without the authorization of variables are presented only data that the user has access according to the profile defined, Does anyone know how to do this? Thanks Capeletto

  • Infomration About SAP Netweawer CE 7.1

    I am going to install SAP Netweawer CE 7.1,But this requirement is to intall SAP Netweawer CE 7.1 with SP 8. I have checked in Service market place there we can find only CE 7.1 with SP 5 guides not CE 7.1 with SP8. My question is that do i need to i