No wlan and bluetooth after recovery

WLAN and Bluetooth is lost after I took my ipod touch through a receovery procedure

Here is Apple's article for that symptom. You may end up making an appointment at the Genius Bar of an Apple store since sometime the steps do not fix the problem.
Unable to use Wi-Fi or Bluetooth with iPhone or iPod touch because there's no address listed for the device

Similar Messages

Problem wireless and Bluetooth after update Lollipop

problem wireless and Bluetooth after update Lollipop
wireless and Bluetooth not working
and wireless cannot be enabled

Moooss wrote:
thank you for all but i have problem and sony mobile update engine setup 2.15 can't be download I need program sony mobile update engine setup 2.15 another this link http://software.sonymobile.com/ns/omsi/1/common/installfile/Sony_Mobile_Update_Engine_Setup-2.15.6.2...
Sony Update Software (also known as SUS) has been discontinued some time ago, and now the update process is entirely integrated in PC Companion and Mac Bridge. Just Download PC Companion from here:
http://www.sonymobile.com/gb/tools/pc-companion/
Open PC companion -> Support zone -> Phone/tablet software update -> Repair my phone/tablet (blue link style). Follow the steps given, do not connect your phone until prompted to press volume down while plugging USB cable.
A proud Sony User since 2002
If I was helpful to you, thank me by Kudos

Satellite L350D - WLAN not working after recovery disk

Hello there
I just got a L350D. I ran the Recovery Disk tool, without any other programm running. It was on a good way of finishing the second disk and than: BAM! blue screen. Since the start up, my LAN and WLAN is not working.
It always says "WLAN 2.0 bg Adapter" to which no driver is found. The correct driver is a Realtek for both WLAN and LAN.
Do you think the crash busted the WLAN and LAN module?
Things i tried:
System reset
Driver reinstall
but nothing worked.
Has anyone any hints?
Thanks a lot!
mycale

Hi!
I dont know what the reason is for this BSOD during the installation but can you post the BSOD code? So you can search on the Microsoft Knowledge Base for this code.
Furthermore I would try to update the BIOS of your notebook that you can find on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
After you have updated the BIOS try to update the driver of WLAN and LAN card or try to reinstall Windows again using the Toshiba recovery disk.
Bye

No more wifi and bluetooth after a restoration OS3 to OS4

Hi,
My iPod touch 3G 32go (MC008NF) was updated to OS 4.2.3 and everything was working OK, one day it gave me the screen "connect to iTunes" with the usb cable symbol. I had to make a restore, and I did not pay attention that my last backup was on OS 3.
It works fine, but I lost the wifi and the bluetooth, even after an blank restore, and all the steps mentionned on the apple official assistance guide.
I have then made an upgrade to OS 4.3.5 (8L1) to check if this problem was solved, but no and I still have the same probleme.
The informations menu gives me "Wi-Fi adress : N/A" and "Bluetooth : 00:00:00:00:00:00". The network menu gives me "no Wi-Fi" and the bluetooth menu says "unavailable" (in French...)
I had tried to se someone at the apple store from Paris, but they told me I need to buy a new one.. As this is not my fault but more a problem in the update system I was wondering if someone had a solution for that ?
Thank you
Thibaut

If you tried everthing here, then it is a hardware problem. I know of no solution for fixing the broken one.
iOS: Wi-Fi or Bluetooth settings grayed out or dim

Not able to switch on WiFi and Bluetooth after upgrading to Windows 10

I was using Windows 7 Home Basic preinstalled with the laptop since 2011. The laptop was working fine. After upgrading to Windows 10 the WiFi and Bluetooth is not working. Tried help from Microsoft remotely. According to them the drivers are not working and there is no updated drivers available for Windows 10 on HP website. The driver installed presently is "Broadcom 4313GN 802.11b/g/n 1x1 Wi-Fi Adapter".Please help and advise whether to stick with Windows 10 or to roll back to Windows 7 as I have an option to purchase a removable device to use WiFi and Bluetooth.I love the lightness of the new operating system. Please help!!!

If you have already reset your iPad the next would be to restore it agin. After that talk to Apple. Also see previous threads:
http://discussions.apple.com/thread.jspa?messageID=11485805&#11485805
http://discussions.apple.com/thread.jspa?messageID=11485803&#11485803

N82 WLAN and Bluetooth Headset

Hi Guys,
I have two problems:
1. I have a Nokia Bluetooth headset HS-36W and my Nokia N82 does not seem to detect it. However, my Nokia 7610 was able to detect it and I was able to use the headset. Is HS-36W not compatible with Nokia N82?
2. I tried using WLAN but was a failure. The connection was open so NO user ID or passwords were required. Error was WEB: NO GATEWAY REPLY. Others using a laptop was able to access the network. Is there any problem or is there something required from me to do?
Appreciate your advice.
Many thanks!
SW: 20.0.062

Check your positioning settings first: what is your access point there, and what is your positioning server address? The access point should be a GPRS access point, defined by your service provider. Write down your default positioning server address and replace it with supl.nokia.com that usually works well. If it won't, you can always return back to your default server. Usually the server is automatically correct on N82.
You can't use WLAN connection for the Assisted GPS and most likely also WAP is out of the question. You'll need to use a GPRS connection in order to get the current satellite status without waiting outside for several minutes. If you don't have a GPRS data subscription, you're out of luck. Contact your service provider for this.

Problem with WiFi and Bluetooth after iOS 7.0.4 update

Hello.
Since the iOS 7.0.4 update, I've lost both my bluetooth and my WiFi connection. As some other users has said on previous reviews, the WiFi button stay grayed and the bluetooth shows a spinnig "thinking" wheel, and that's it. Before that update, both services were working just fine.
I was hoping that the 7.0.6 update could fix those errors, but my problem remains.
Any Official comment from Apple about this issue?
Thank you.

Hello.
Since the iOS 7.0.4 update, I've lost both my bluetooth and my WiFi connection. As some other users has said on previous reviews, the WiFi button stay grayed and the bluetooth shows a spinnig "thinking" wheel, and that's it. Before that update, both services were working just fine.
I was hoping that the 7.0.6 update could fix those errors, but my problem remains.
Any Official comment from Apple about this issue?
Thank you.

HT4061 my Iphone 3gs 8giga lost WI-FI and bluetooth after upgrading ?

i by Iphone from USA now Im in Jordan Middle east can i fix this error
thanks

Call 1-800-MY-APPLE
There are many people who got the same issue.
Guys when you are going to learn that you should wait a bit before you start doanloading updates?
Give it a day or 2 and then decide whether it is safe to do the download!
I have learned my lesson the hard way with iTunes that I don't update until few days when I am sure that it's bug free!

Late 2005 - Airport and Bluetooth - won't work together

Hi everybody!
I have a problem with my Powermac G5 (late2005).
I have the Airport Extreme with Bluetooth 2.0+EDR card installed.
WLAN and Bluetooth work both if operated separately.
But when Airport is activated and running and I turn on Bluetooth (and connect for example my Magic Mouse) Airport breaks down. - I loose my connection and can't see any other wireless networks.
Switching to another Airport channel din't help.
Does anybody have an idea what to do?
Thanks a lot!
Chris

I just started trying BT.
I allready had a look at the cabling and read about it, that it doesnt matter how the calbes are connected to the airport card.
I don't think I can put anything between the antennas.
The late2005 has the build-in antenna (for Airport and BT)...
But I will have a look if I can place anything between an I will change the cabling...
Thanks so far!
Chris

After recovery, admin password filled in with "dots" and cannot delete or change it

Hello.
I ran the Windows 7 updates yesterday, but only the necessary ones. I did not install any of the optional ones. After the updates completed, I turned the computer on and it was stuck in a loop cycle - starting windows, then the admin password log in box came up. The box was fiiled in (with "dots" but too many to represent my password) and the screen just quickly flashed back & forth between the log in screen and "password incorrect". I tried to switch user, and it flashed back to the admin log in.
I did a system recovery to factory defaults (after backing up all data) using the recovery discs. After recovery, the "Set a password for account" screen comes up with the box below "Type a password" filled in completely with dots. I cannot erase them with the backspace or delete keys. If I highlight it and then try erase it with backspace or delete, the cursor just moves to the right hand side of the password box, but it still doesn't delete the faulty password "dots" so that I can change it.
I tried to reboot by holding in the power button and then turning it back on. After selecting country & language again, the same password screen come up.
It is stuck! Any help would be greatly appreciated! I computer I have is the HP TouchSmart 310 PC 1155-Y.
Thank You!
This question was solved.
View Solution.

That is curious with a Recovery. First, try to reset the password using NTPassword. Make the CD, boot to it following the directions. If that does not solve the signon problem, consider installing the OS from a regular Windows 7 disk of the same version, using the key from the COA sticker.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

IPad wifi and Bluetooth greyed out after iOS5 update

After updating to iOS5 on my iPad my WiFi and Bluetooth were greyed out like the update has caused a hardware failure on the radio side. My SIM and 3G still work (not that I use it) but I can not even choose wifi or bluetooth in settings app as they are greyed out.
In Wifi it says "No Wi-Fi" and Bluetooth it says "Unavailable"
I wasn't using it a lot so just forgot about it for a while as it sat gathering dust being an expensive paperweight thinking that the next software (5.0.1) update would sort it all out. It doesn't. I have a 64GB iPad 3G with no wifi and as I am living abroad the 3G is useless to me (though only use the ipad at home on my wirless network anyway, or not as the case is now!!)
I have restored, factory restored, cleaned installed new software, everything I can think of but still there is no wifi and no bluetooth.
Has anyone else had this issue? My (very expensive) iPad is now next to useless!!
ANY help is VERY much appreciated.

thank you for fast response and sharing the link but i've tried everything including downgrade but it seems that theres a serious problem with MC497LL model and trying to reach to the support for any updates about it at least trying to inform them

After update iMovie and OS Yosemite recovery, iPhoto icon disappeared. How can I find photos stored on iPhoto?

I am using iOS Yosemite 10.10.3. After update iMovie version 10.10.08 and OS Yosemite Recovery. iPhoto icon disappeared. I opened the Photos icon but all my images which used to be in iPhoto were not there. How do I access those images in iPhotos?

Go to Finder>Applications and open the iPhotos app.
Apple want you to use the new Photos app which now should be in your Dock. Photos will import your iPhoto library

When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle, after it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

Hi bahaluly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
Get help with iOS update and restore errors - Apple Support
Solve network errors
Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Cheers,
Mario

HT3529 My iphone 3GS is stuck in recovery mode since upgrading to ios 5 and still, after upgrading to ios 6. What's up ?

My iphone 3GS is stuck in recovery mode since upgrading to ios 5 and still, after upgrading to ios 6. What's up ?

I just went through this yesterday and because i am no where around my computer i lost everything and now my battery drains very fast...you are going to have to recover your phone i hope you have everything backed up and are next to your computer...if you are push and hold your home button and plug into PC at same time and continue to hold the home button untill you see your USB on your pc screen light up (depending on what type of pc maybe i dont know what you have)
push home button
Plug into pc usb
usb on pc screen lights up..let go of home button
follow instructions for restore/sinc
hope it helps

After installing Mavericks, I have intermittent problems working with Wacom Intuos 4 and bluetooth keyboard.

I use Photoshop extensively with a Wacom Intuos 4 and Apple bluetooth keyboard, and have had no problems (as below) before.
Each time I use the tablet, the keyboard gets intermittently unresponsive, and it will only respond again after I tap the tablet pen on the tablet. And sometimes after repeatedly tapping the pen on the tablet.
It gets so frustrating as I use the keyboard to change Photogshop tools etc, and everytime it doesn't response I have to do the tapping again.
Appreciate some sharing of solutions, if any.
Thank you.

I'm having the same issue and its very frustrating.
I use Photoshop and Flash heavily at work, but can't use my wacom at all anymore because:
its seems Shift gets stuck and everything becomes highlighted
shortcut keys won't work
when I drag out rectangle shapes the corners automatically become curved and eventually my rectangle becomes a circle
I will click on a keyframe and the actions panel will automatically pop up
when I try to move objects they duplicate.
More things happen but those are the ones I can think of off the top of my head. When I switch to a regular usb mouse the issues don't occur. I've tried uninstalling the driver and reinstalling and the issues still occur. Its completely slowed down my productivity and is starting to hurt my wrist now :\
Nice to know that someone else has a similar problem at least. Hopefully apple or wacom will come out with a fix soon.

No wlan and bluetooth after recovery

Similar Messages

Maybe you are looking for