No wlan connection under XP / Bootcamp 2.0

Hi,
I've set up a perfectly stable Windows XP Professional (SP2) under Boot Camp 2.0 - unfortunately I only have LAN, but no WLAN connection. All drivers have been installed, but whatever I try, I can't connect to the internet. The ipconfig seems to be ok., nevertheless I can only connect to my LAN and workgroup, but not to the internet.
Maybe I should upgrade boot camp to the newest version? How do you do this? Do I have to upgrade Boot Camp on OSX first and then on Windows?
Thomas

Boot Camp Beta 1.2: Windows XP (SP2) unable to connect to 802.11n wireless router or AirPort Extreme (802.11n) Base Station
Relevant previous discussion.
iFelix

Similar Messages

Help! Can't connect to wifi under Vista (bootcamp)

I have no problems connecting under OS X but not under Vista (bootcamp). I checked all the settings in my Belkin router and can't find anything that would cause this. I even tried turning off the security settings, disabling wep/wpa; and even added the mac addresses to the mac control.
However, I was able to connect to the neighbor's unsecured wifi.
Please help! Thanks

nvm, i found the fix...i searched the forum and found a thread in which the poster suggusted a driver download.
I downloaded this driver and it works perfectly....**** bootcamp!

Thinkpad X220: bad wlan connection when docked and lid closed

Dear forum
I use a Lenovo ThinkPad X220. I have no trouble with the wlan connection when i use the notebook alone. The wlan connection is also stable when i use the notebook plugged in the dockingstation with the lid open. But when I use the notebook plugged in the dockingstation with the lid closed my wlan connection drops regularely to about 2 Mbps and gets very unstable.
The ThinkPad uses the Intel Centrino Advanced-N 6205 wlan network controller:
$ lspci | grep 6205
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
The network controller uses the iwlwifi driver, that comes with the current linux-firmware package:
$ pacman -Ss linux-firmware
core/linux-firmware 20150206.17657c3-1 [Installiert]
Firmware files for Linux
I didn't change any options of the kernel module, everything runs in default mode:
$ modinfo -p iwlwifi
swcrypto:using crypto in software (default 0 [hardware]) (int)
11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
amsdu_size_8K:enable 8K amsdu size (default 0) (int)
fw_restart:restart firmware in case of error (default true) (bool)
antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
nvm_file:NVM file name (charp)
uapsd_disable:disable U-APSD functionality (default: Y) (bool)
bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
power_save:enable WiFi power management (default: disable) (bool)
power_level:default power save level (range from 1 - 5, default: 1) (int)
fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
At first I thought, the problem could be caused by the KDE power saving settings. I changed the settings, so nothing happens when I close the lid (no hibbernation or screen lock or something like that), but without success (the wlan connection is still unstable under the described circumstances).
Also dmesg shows nothing that points out a problem (as far as I can see):
$ dmesg | grep iwlwifi
[ 19.688522] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 19.688679] iwlwifi 0000:03:00.0: irq 31 for MSI/MSI-X
[ 19.696095] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 19.718023] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 19.718027] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 19.718028] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 19.718029] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 19.718145] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 19.753757] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 20.128443] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 20.128652] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 20.403905] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 20.404212] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 68.922975] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 68.923192] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
So I have no idea where this strange behaviour comes from (only wild guesses: buildfactor, antenna orientation,...).
Any help would be really appreciated.

hmmm...
how about checking both your wired and wireless nic drivers in device manager to make sure that the "allow computer to turn off this device to save power" checkbox on the power management tab is deselected.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Multiple WLAN connections

Does anyone know of a way to get my PODCAST and Email applications to use multiple WLAN connections?
I spend most of my day in one of two places, each with a different WLAN, and I'd the phone to have the sense to change WLAN connection as they become available.
Thanks for your time.

Depends, on what your phone is.
If you're using an N97 or a 5800, or anything running on s60v5 for that matter, Go to Menu>Settings>Connectivity>Wireless LAN>Options>Settings>Show WLAN availability. Then you can also set how often it will set to scan for WLAN connections. This would allow the phone to scan for WLAN hotspots around you immediately. Be warned however that this will drain your battery faster.
On an s60v3 phone, I am not very familiar but from what I know its in Menu>Tools>Connectivity>Wireless LAN>Options>Settings>Show WLAn availability.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

E71X WLAN Connectivity Errors with apps

I'm experience two types of errors:
1)OVI Store and Media net browser apps return the error: "WLAN connection already active. Close it and try again." When I first bought the phone I was able to access the OVI store through Wifi. This error prevents this Ovi Store from accessing the WIFI connection.
2) Even thought the phone shows that it is connected to the access point, when I startup the Opera Web browser, it prompts for a WLAN connection. I would think that Opera or any other
I think that these two symptoms are tied to the same root cause. Any suggestions would be appreciated. I'm hoping that this is a settings \ configuration fix.
Thanks!

I can tell a idea about your second question. If your phone already connected to the access point opera browser will ask to connect to internet. It is a matter of the application not a bug of your phone. There are some settings to Opera mini application. There is a option as communication . Under that option there is connectivity. It is normally selected as ask first time only. That is you opera mini ask for the internet connection although it is already connected to the internet. If you don't wish to happen it again you have to select always allowed.

N8 3G and WLAN connections

Is it possible to turn off the 3G and WLAN connections so that the they are active ONLY when I need them?
Currently I have 3G connection active all the time even I do not do anything with the Internet or applications which are using 3G (main display is showing the "connected" character below the 3G letters).
Also I would like to turn off the "search WLAN" feature until I am going to use that connction. I do not want to turn it OFF completely just want to put it away until I really need WLAN. I do not want it to search the WLAN networks until I need the WLAN.
I would like to turn these connection off to save the battery.

As it was stated in several review articles, the connectivity concept on the N8 (formerly Symbian ^3) is still somewhat in an experimental state.
The introduced "Destinations" yet most of the programs are not aware of this functionality. My tipical scenario would be that I have:
- destination with all my WLANs and 3G for fallback
- destination with WLANs only
- destination with 3G only
this would allow me to direct my data flow exactly where I want it.
Instead what I get:
- AGPS goes out on a random (!) data connection
- S60v5 apps try to go the old way of "Define access point", being unaware of "Destinations"
- Gravity is even more confusing as it has its own WLAN option and absolutely disregards the phone options. It goes out on 3G even if there's WLAN available .
So the basic answer to your question:
at his moment can only check under connectivity what app is using your 3G data and check the setting within this app. You cannot generally disable 3G connection as far as I know
trying to get along with an N8

Fn f5 switch for wlan did not work - no wlan connections listet...

Hi,
my english is not very pretty...
My system:
W510 4319 2-DG
W7 Ultimate 64bit
I have problem to get my wlan working.
The adapter drivers are installed over the latest
driver software installer from lenovo:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6mws21ww.exe
and not by the hardware manager - but i did try that also...
After installing rebooting i can not switch the wlan button under fn+f5 on or off - nothing happens!
LAN and WWAN works good but i can not make a connection to my wlan router (or any other wireless station)
If i try to make a new wireless connection manually in the network center i become a error message
Here some png´s as documentation:
Trying to add a new connection manually:
LAN & WWAN are present but no WLAN entries:
fn+f5 wlan switch is not working and always in off mode:

Maxon:
I suggest that you go to 'Control Panel', then to 'Network and Sharing Center', then click 'Change Adapter Settings', and once you are there, make sure that you do not see a red 'X' beside your wireless connection. If you do, you might want to examine the 'Properties' of the Wireless device to make sure that all is in order.
You might also want to go to 'Control Panel', then to 'Device Manager', and make sure that the wireless device (which will be listed under 'Network Adapters' is not disabled.
Glück...
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

Where are you hosting the site a what are you using to upload the site files to the server?
OT

What is WLAN connectivity, how to use it for inter...

hi all
i have nokia n79, i have know about WLAN connectivity, i mean how to use it. i just check it in my office it shows WLAN network found, i opend it and select start web browsing, then it asked select WLAN network there it already shows hidden WLAN, then i connected it through hidden WLAN then it asked WLAN network name, what is WLAN network name and how to use WLAN network for internet browsing. pls suggest me
thanks/regards
Chandrakant Rajolkar

This will get you started.
http://en.wikipedia.org/wiki/Wireless_LAN
Check your user manual.
http://europe.nokia.com/get-support-and-software/product-support/nokia-n79/guides
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

N95 WLAN Connection problems - Orange Livebox (UK)

I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?

hi,
did you press "1" button at the back of the Livebox before pairing ?
what kind of error message do you get on the N95 ?
does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
Cheers,

Firefox with wlan connect on laptop gives no connect what I need to maake wlan connect, network is ok

have a bought a hp pavilion g series. had trouble with installation and updates. now problem that firefox with wlan has no connection. suse linux 12.1, wireless lan 802.11, FRITZ!Box Fon WLAN 7270, find no setup for wlaan in firefox that over the laptop wlan connection will work

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
See "Firefox connection settings" in [[Server not found]]
You can find the connection setting here: Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select ''No Proxy''

WRT54GL loses Wlan connection

Hi
I have a problem with an WRT54GL Router. It keeps losing the Wlan connection. Then I have to reboot the router to get it working again.
On some days everything works fine, and the other day I have to reboot every 5 minutes.
I don´t use P2P. So there are not many simultaneous connections. Mostly there are only one or two Wlan Clients active.
Between the Router and the Client is only one Wall. Signal Strenght is at all times above 85%.
Does anyone have an idea what might cause this?

Try upgrading your router's firmware and reconfigure it from the scratch.
Click on this link for the instruction.

Help!!!!!!!! WLAN connection E71

I have a problem with WLAN connection (E71), when I access my wlan, i receive a message saying " WLAN is already active, close it and try again".

Please, have someone any solution?

How to execute "netsh wlan connect SSID", but SSID has space and quotation marks?

Dear all:
I have a wifi roruter with SSID test "3"
But when I execute following command netsh wlan connect "test \"3\""
the netsh reply: 未將設定檔 "test " 指派給指定的介面。
Sorry my windows7 is chinese version, but as you can see, netsh detect my SSID as
test, not test "3".
Does everybody know how to use netsh to connect to a SSID, and these SSID has space and quotation mark both?
Regards,
Joseph

Hi Joseph,
Firstly, please modify your SSID name to make sure it do not contain spaces or special characters. SSID name is the router setting. please go there to change SSID name.
In addition, If only one SSID is specified in the profile, then the specified SSID is used to connect, and the ssid parameter is not required. If the profile specifies multiple SSIDs, the ssid parameter is required.
Therefore, I would like to suggest you run command as this syntax:
netsh wlan conncet ssid=Your SSID of the unsecured wireless network name=Your current profile name
To do this, please refer to the section “connect” in the following document:
Netsh Commands for Wireless Local Area Network (WLAN) Preliminary
http://technet.microsoft.com/en-us/library/cc755301.aspx#bkmk_wlanConn
Karen Hu
TechNet Community Support

5800,Wlan connection appears as 'unknown', however...

Hi to everybody!.
I have an issue with wlan connections. I defined a new access point in wireless connections, and I put it into the 'internet' destination. The access point is saved as WLAN_XX, and works perfectly.
As soon as I disconnect it, and click to find wireless connections, something rare happens. When there is high signal, the connection appears as 'known'. However if there is low signal, appears as 'unknown'. Therefore I have to configure it again as a new connection (retyping the wep password),which as a consecuence, is saved as 'WLAN_X01)'.
I updated the firmware from 31.0.101 to 40.0.005. A saved connection always showed as 'known' (even when i had not enough signal to connect) when i used the old firmware (31.0.101). I don´t know if it´s a new feature or a bug or how it´s solved, someone knows? Thanks.

angel_apm wrote:
Hi to everybody!.
I have an issue with wlan connections. I defined a new access point in wireless connections, and I put it into the 'internet' destination. The access point is saved as WLAN_XX, and works perfectly.
As soon as I disconnect it, and click to find wireless connections, something rare happens. When there is high signal, the connection appears as 'known'. However if there is low signal, appears as 'unknown'. Therefore I have to configure it again as a new connection (retyping the wep password),which as a consecuence, is saved as 'WLAN_X01)'.
I updated the firmware from 31.0.101 to 40.0.005. A saved connection always showed as 'known' (even when i had not enough signal to connect) when i used the old firmware (31.0.101). I don´t know if it´s a new feature or a bug or how it´s solved, someone knows? Thanks.
This is normal. You can delete this access point from the settings and re-save it.
If you want to thank someone, just click on the blue star at the bottom of their post

No wlan connection under XP / Bootcamp 2.0

Similar Messages

Maybe you are looking for