No work item found for workflow WS14000109 Urgent

Hi,
I am using Extended classic scenario, I have created a PO in SRM having a PO value of 100000 INR and the work flow which is triggered is WS14000109 i.e. spending limit worlflow.
My approval limit is 25000 INR and I have three approver
Approver A has approval limit 50000 INR
Approver B has approval limit 75000 INR
Approver C has approval limit 12500 INR
Now the problem is that the PO has the status " Awaiting Approval" and when I checked the PO in transaction BBP_PD, I got the message that no work item is found for all the three approver.
I am not able to understand why the workitem is not being sent to appover A and later on to B and C
Please help me out as this is really urgent
Regards,
Yatendra

Hi Yetendra,
You approval workflow task should be a general task.
Make it a general task and you will work items flying around.
Please reward few points if you feel this answer is helpful.
Regards
Pras Durafe

Similar Messages

SC in Awaiting Approval but no work item found for SC

Hi
We are in SRM 5.5 Extended Classic Scenario will item-based approval workflow for SC.
A requestor has created a SC which requires several steps of approval.
The shopping cart has status 'awaiting approval' but when we check via BBP_PD system gives 'No workflow item found .
Why this occurs is already strange we have lots of SC every day and workflow item is created properly.
But 2nd question is if there is a solution available to retrigger / restart the workflow for this SC ?
Any help would be appreciated

Hi,
did you check in SWI6 or SWIA?
Saravanan
Edited by: Saravanan Dharmaraj on Nov 30, 2011 1:57 PM

Change in Work item Text for Approval Workflow WS14000133

Hi,
I need to change the work item text for Shopping Cart Approval Workflow WS14000133.
I have created an Attribute in Business Object BUS2121 and called the same attribute in work item text.
In PFTC -> Redefine Work item text - > and i have defined the work item text as well called the attribute from the container.
what the problem over here is - when I am passing the attribute in the work item text in the task, I am unable to see the work item text with the Dynamic Attribute but I am able to see the work item alone (not with the Dynamic attribut)
But when i debug the workflow from SWI1 then i can see the dynamic attribute in the Container of the workflow but nt in the approver's inbox in portal..
Can you please tell me - that why is this a strange behaviour that i can see the Dynamic attributed created initially in the workflow container of the Business Object but nt in the Approvers inbox either in Backend nor in the front end...
Thanks,

Hi,
Maybe this SAP note/KBA will help :
1470761 - How to change the text of the SRM approval links in inbox or UWL
Kind regards,
Siobhan

Work item display for step : Deadline Missed

Hi,
Parked invoices for one of the vendor is not triggering the work item in the workflow inbox.
But the status is showing as complete. Appreciate if provide guidance how to analyse the issue.
The message is read as below:
Deadline Missed: Invoice# 5106117758 PO# 4567819 Vendor# 10300
Work item display for step " Deadline Missed: Invoice# 5106117758 PO# 4567819 V " called...
Message no. WL223
Thank you

Hello,
"i looked in SWI1 to see who processed it. But it is not showing any parituclar agent name. "
Maybe nobody has process it, which is why it went overdue and passed the deadline.
If it's a dialog task and it's completed then there must be an agent attached to it.
Look in the workflow builder to see how the deadline is set up for that step. It could be that it just issues a notification.
regards
Rick Bakker
hanabi technology

No Suitable Items found for PO (error M8035) while doing MIRO against service PO for the 1st time in the Company Code

Hi
I am encountering the error M8035 (" No Suitable Items found for PO ") while I am doing MIRO for the 1st time against service POs (item cat - D) in a company code.
in OMSY the period opened for the company code is : Current 06 2014 previous 05 2014
This was done because Go Live date for the new company code is 01.06.2014.
I am doing test in the test client now.
I have created a vendor on today's date
I have created a service PO on today's date (GR, GR Bsd IV, IR, Serv Bsd IV - these indicators are marked in the PO)
I have created service entry sheet on today's date (acc assignment - K, G/L a/c was determined from the Material Group maintained in the PO)
I have accepted the service entry sheet on 04.05.2014 (FI doc posted against the matl doc - KBS to WRX on 04.05.2014)
I am trying to do the MIRO in the same company code on 04.05.2014.
While I am putting the PO and its line item in MIRO item and pressing enter system shows the above info msg and nothings is appearing in MIRO item.
I have tried to do MIRO against service entry sheet also - same things happened.
I have tried selecting Goods Service Item+planned del cost in MIRO - nothing changed.
I have tried posting MIRO against a non service PO (acc assgnment K, Item cat - BLANK) after doing MIGO in the same company code in the same date- PO is appearing in that case.
FI people are able to post FB60 manually for the vendor I am using in the PO - so there is no problem in the vendor also.
I have gone through the scn post related with the topic, unfortunately none of them solved my problem.
Please help
Thanks
Sanjib...

Can you post a screen shot for PO history ?
Regards
Dev

No (suitable) item found for purchase order

Dear All,
The order is stock transfer order (STO) item category U. i saw GR is already create. GI and also DCGR. i want to do DCIR which is invoice receipt in tcode mr01, the error "No (suitable) item found for purchase order" is coming out. What would be the cause of this situation? i check with old last PO it is same set with the one that having in problem. i also double click the item to see the detail and what i can see tick option for del completed and no tick on final del.
no GR-based-4 or invoice receipt option to tick. means no tick option for this. but when i see previous po also same. but there is history on DCIR.
Really need to know what should i do? is bug?
Regards
Aishah

In case of out company it was SA(schudule agrement) PO we try on the Credit memo by MIRO t-code through IV
but we met the same error message
The problem cause of not exist delivery schedule quantiry we have put in the qty to there by manually after than this issue cleared.
Hoil.

How to display a message from program in work item text in workflow

Hi,
I need to display an error message in the work item text in workflow . The error message is contained in the container t_container and the field in which the error message is contained is t_container-textvarfortextelements
the text that is contained in the field " t_container-textvarfortextelements " is "Incorrect store mapping ".
I need to display "Incorrect stor Mapping" in the work item text.
I am working in 40B .

4.0B?
Just add a new element in the task container (input variable) and add the variable to the Task text. Don't forget to pass the value from the WF container to the Task.
Regards, Uwe

Finding Work Item IDs for a particular Container Value

Hi All,
I am trying to find a workflow that ran on 9/3/09. What is easiest way to find the particular workflow ID if I only have a container value to tie to the workflow? Is there a WF table or transaction that I can use to search for work items on a particular day with a specific container value?
Thank you for your help,
Brian

Hi,
If you know the value of key elemnt of your BOR then you can use SWI6 tcode.
Here you have to enter the object name, object key, slection variant as All instances and selection period as All.
Example : my object is BUS2012 and iknow the object key : 4500002345 then in SWI6 you will definitely get it.
Thnaks and Regards,
Swaminathan

Work items creating for GoodsMovement IDOCS

Hi Friends,
We have IDOC to File and File to IDOC scenario, we are able to post GRN files into SAP successfully, but for some idocs , work items are creating for some line items where there is error . After analysis we have come to know that there is some error in article or price is missing.
what i would like to know is instead of creating idoc for some items success and some with work items ,can we restrict if there is error in any line item.
for example:
let us say if i have one GRN file with 10 line items.when i post this File into SAP .. It post 7 items as success and for 3 items it creates workitems.
1) Is there anyway i can restrict the entire idoc , instead of posting 7 items once and after re-processing 3 items in second one.?
2) how to avoid creating work items?
one more thing I have created a backgrounduser for PI while posting to SAP. Some articles are showing as article is locked by piuser.
can anyone suggest how to overcome this..
Regards,
Suman

Suman
What is the Message type / IDOC type your are using? You should be able to create one single IDOC with multiple line items instead of one IDOC for each item, provided the header information for the material document is the same for all the line items. In most cases this is possible.
Check your mapping in XI and see if you can club all the items in one single IDOC. Doing so will also prevent the material locked issue. But, point to note with this design is that you will be penalizing good records in your file just because one line item was in error.
KK

ALE settings error "Too many recipients found for message type" urgent

Hi all ,
please help me to solve this issue !!!!!!!!
i done with ale settings .
in the bd64 , orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

Hi,
Try to redefine your distribution model to have both receivers of your message type ORDERS in one "model view".
Regards,
Jakub

Post Goods Receipt in EWM : No items found for delivery

Hi All,
I am sending across am Inbound Delivery from ERP to the EWM System.
The sequence of actions are as follows :
1. In bound delivery being sent from ERP to EWM.
2. Warehouse task being created in EWM.
3. Warehouse order being created in EWM.
4. Warehouse task confirmed and saved in EWM.
When I go and try to do a PGR for the delivery in EWM, then it complains about no items being found in the delivery for Goods Movement. Could someone please let me know if I am missing any steps for the PGR. Are there any specific configurations that need to be done for the PPF?
Thanks,
Arup

Hi Thiru,
A somewhat late aswer, but it might be helpfull for other users with the same problem. You can solve this problem by assigning the division/valuation area to the business area. Follow the path below to execute this:
SPRO - enterprise controlling - Consolidation - Integration: preparation for consolidation - Preparation in the sender system - Further settings for Business Area Consolidation - Materials Management - Assign Division/Valuation Area to Business area.
Under Enterprise structure - Assignment - Logistics General, you will find a similar function. First execute option 1 or 2 here and then execute option 3. This makes it work as well, exept that it will not be recorded in a proper transport. The first option I gave for assigning is properly transportable.
Greetings,
Sjaak van den Berg
Magnus Technology Consultants
Edited by: S. van den Berg on Aug 14, 2009 1:09 PM
Edited by: S. van den Berg on Aug 14, 2009 1:10 PM

No (suitable) purchase order/item found for MR11

Hi,
I am trying to do an MR11 on a PO but it says that there is no PO found. But when I look at the PO history there is an entry in Total variances through IR. Then why does it say there is nothing to do MR11 for?
The PO quantity is 440.030
The GR Quantity is 440.030
The IR quantity is 450.310
There is a variance of 18,481.48 in the amount. And that is what i am trying to do an MR11 for. Could it be because there is not Open PO quantity?
Thanks,
Jograd

Hi,
check is there any tolerance set for IR.
Regards
Ravi shankar.

How does it work Item Conditions for a PO

I need to retrieve the correct price of a material in an agreement, depending of the validity period. I noticed that, clicking in the button: Item Condition I obtain the right ammount.
I also noted that the value that I need is KONP-KBETR, but I need to know how to move from table EKPO to this table KONP (How are they linked - fields - )
TIA

I think the best way for you is to put a break-point in 'pricing' and then use ME32 (I think) to change the contract. Go to the condition screen and add an entry, this will force the flow through the fm, I hope. Then you'll be able to see the parameter values that get passed into 'pricing' and can try to simulate that in your own program.
Also, you could run ME32 in SE30 and have a look at the db tables being used. That might tell you where the conditions are held.
If you have no joy with the contract transaction try and do the same thing with ME22N instead to see how pricing should be used.

Forward Work Item And Restart Workflow

My problem is that:
Requester: John
Manager: Peter
John shops a SC. when the workitem comes in Peter´s Inbox, he decided to Forward this Shopping Cart to Jonh again.
In this moment Peter can change the shopping cart and he has the button "Save".
When he saves, the SC is automatically approved!!!!! I would like that when the shopping cart back to John the workflow must restart... It is possible?
Thanks!

System checks workflow start condition. You can search information in the <a href="http://help.sap.com">http://help.sap.com</a> .
<a href="http://help.sap.com/saphelp_srm50/helpdata/en/37/830b3b7e7ef74de10000000a114084/frameset.htm">http://help.sap.com/saphelp_srm50/helpdata/en/37/830b3b7e7ef74de10000000a114084/frameset.htm</a>
Regards,
Masa

RBBP_OFFLINE_EVAL No e-mails exist for execution of work items

Hi ,
We are trying to implement SRM offline approval. The system is able to send the email to the approvers, but when they click on approve, the work item does not get updated.
When i try to run report RBBP_OFFLINE_EVAL it says that No e-mails exist for execution of work items. No Work Item Found for Processing. What do i need to check to resolve this. If I approve thru SRM, it is working.
Thanks,
Jograd

Hi
refer related links too
SRM : Offline approval process
Offline approval not working?
Check WF-BATCH user id has email ID?
regards
Muthu
Edited by: muthuraman on Aug 18, 2008 8:00 AM

No work item found for workflow WS14000109 Urgent

Similar Messages

Maybe you are looking for