No xenbr while creating vm from the manager

Hi all
I am trying to create a virtual machine from the template:
Oracle Enterprise Linux release 4 Update 5 x86_64
But when I arrive to set Virtual Machine Information I cannot choose or set the xenbr for the vif, and the manager cannot make me go on without any network card.
what's happening ?
Giacomo

[root@oracolo /]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:30:05:CB:08:08
inet addr:172.16.0.243 Bcast:172.16.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3186918 errors:0 dropped:0 overruns:0 frame:0
TX packets:5251134 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1075516201 (1.0 GiB) TX bytes:2680694850 (2.4 GiB)
Interrupt:16
eth1 Link encap:Ethernet HWaddr 00:30:05:CB:08:09
inet addr:192.168.254.209 Bcast:192.168.254.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:28537 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2003440 (1.9 MiB) TX bytes:84 (84.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:24336 errors:0 dropped:0 overruns:0 frame:0
TX packets:24336 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4612993 (4.3 MiB) TX bytes:4612993 (4.3 MiB)
peth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:28585 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2120664 (2.0 MiB) TX bytes:128 (128.0 b)
Interrupt:17
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:28537 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:84 (84.0 b) TX bytes:2003440 (1.9 MiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:28339 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1578546 (1.5 MiB) TX bytes:0 (0.0 b)

Similar Messages

Getting Error ORA-00604 While Creating View from front Ent

Hello All,
I am getting ORA-00604 while creating view from the front end. And some time I get Maximum cursor open, It is ok amy be I am opening cursors in while loop. While ORA-00604 is giving lots of truble to me. In help it said to contact Oracle service, I dont know how to do that. Help me.

Please post your view definition including the complete error_message and also the relevant parts of your code with the while loop.

Password Violation error while creating users from Admin interface

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Error while creating subsite from site template

Hi,
I am getting below error while creating subsite from existing site template .
Sachin Bhosale

There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers,

PS: WBS is not flowing for a Material, while creating delivery from Project

Hi,
While creating delivery from Project thro CNS0, WBS is not flowing for a Material in delivery, in turn WBS is not flowing in Billing document for same material, in turn not allowing to Post the Billing document to Accounting.
Error while releasing Billing to the Accounting: Accounting Entry is not generated. Error Message:Assign Condition type
YMRG in COPA.
Pls let me know, what can be the reason ?
Thanks.
Amit.

Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul

Error while creating datasource from table MBEWH

Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.

Hi Zakir,
      This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and   create one datasource...
   so, you need to check that   related table also.. for that MBEWH table..
    ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay

Error while creating DTP from DS to Infoobject

Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
Satya

Hi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose.

Error while creating datasource from view ZBSIS_VIEW

Hi all,
I could not create the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
"Invalid extract structure template ZBSIS_VIEW of DataSource"
Can anyone help on this regard.
thanks.

Hi,
Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource.

Error has come while creating USER from SU01

Dear Expert,
I have got typical error while creating user from T-Code SU01.
Problem is like that : I suppose to use SU01 and "User Maintanace: Initial Screen
has come. Now I put the new user name like ABAP2008 or FI2008 (what ever the name thats hardly matter) and click on CREAT button then next screen Maintain User has been appeared.In this screen Address TAB is on and asking for fillup all the required user information.So I have been made all information like :First name /Last name /Tele ph/Fax / email etc etc. After complete this tab when I clicked on next tab is called "LOGON DATA, it has been given a error "Specify a valid country indicator
Message no. T5027" . Even thogh I didn't able to go to next screen LOGON DATA.Because of these problem I doesn't able to creat a user.
SAP : IDES version ECC 6
DB:SQL2005
OS: Windows 2003 server
Please do the needfull
Thanks & Regards
Pavel

Hey Pavel,
Are you using ECC with ISU.. ? I am not sure but I feel your issue can be solved with information provided in SAPnote,
Note 1046566 - EC70: address-independent telephone number no country.
The system does not transfer any country from the master data template with the address-independent telephone number. The system issues the warning message T5027 "Specify a valid country indicator".
All the best !

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Can't create Project from the Template or access project template

Dear Experts,
We are facing a issue while trying to access the project template/create the project from project template.
we have 4 project template in place and of these two are working perfectly fine but
From remaining two we are not being able to create project and even templates are not accesible , whenever we are trying to access the project template system rotates a circle for some time and keeps us on the same page.
Even when we are trying to create project from the same template, system does the same again rotates the circle for some time and keeps us on the same screen.
And System is not throwing any error for the same (we have checked in the log as well) just not letting us in and not allowing us to create project.
Any Help Will be Highly Appreciated.
Regards,
Rakesh Daiya

Dear Experts,
We were able to find out the issue,
We added 3 groups to the template with "Reviewer" access with "Document Only" Type in the project template.
When we changed the type to "Template and Document" from "Document Only" and system started allowing us to create projects from the template.
Can anyone please help me with one query,
Can we add a group(which includes all the buyers) with reviewer access and with Document only type?
Does this really be a reason behind projects are not getting created from template?
Any help will be appreciated
Regards,
Rakesh Daiya

Setting bind variable for a view object from the Managed Bean

Hi,
i am using JDeveloper 11g, i have to create LOV in the JSF. To show the LOV, it has to populate data using View object and its query parameter need to be sent from the Managed Bean.
For the View object i want to set the bind variable parameter from the managed bean value. bename is stored in a managed bean (session scope)
#{beantest.bename}
But it gives the following exception.
JBO-29000: Unexpected exception caught:
org.codehaus.groovy.control.MultipleCompilationErrorsException,msg=startup failed, Script1.groovy: 1: expecting '!',found '{'@ line1, column 2.
I have followed the link http://kr.forums.oracle.com/forums/thread.jspa?threadID=615474 like Frank wrote on 8.2.2008:
But steps are not clear.
How to input the VO bind parameter with Managed bean variable?
Any Help
Regards
Raj
Edited by: user9928180 on Dec 17, 2008 9:51 AM

Hi,
a bind variable in a VO needs to be exposed as an executeWithParams operation in the pageDef file. Just add a new action binding to the pageDef file (context menu) and select the executeWithParams operation on teh VO. Then in the argument field, reference the managed bean property for the value
Frank

Error : 404 not found while opening Ciscoview from Campus manager with LMS 3.2

Hi Friends,
While opening ciscoview from Campus Manager Topology, getting error 404 not found by apache web server. pls guide me to resolve this issue if anyone faces the same situation earlier.
Thnx

The name of Enterprise Manger service is em you can find it under deployments in weblogic console. Its status should be active and ok.
Have you tried this
http://technasir.blogspot.com/2013/04/enterprise-manger-is-not-working.html
regards
Nasir

While creating Purchase order the system is showing error: vendor 200001145

Hi experts,
while creating Purchase order the system is showing error: vendor 200001145 on line 00010 for ctype ZB12 not defined as head office vendor.
Plz give solution for this.
Thanks&Regards
sreenivas

Hi,
Please check vendor schema maintained in the vendor master,. through this condition type arepicking from system
Aboue condition type not mainatained inthe caluation schame ,which you assigend to vendorand purchasing organization
regards
Channa
Edited by: channadodawad on Dec 3, 2009 9:22 AM

Unable to find Par file while creating iview in the template

Hi All,
Iam trying to change the Masthead iview, i deployed in NWDS and successfull. but while creating iView in the portal i could find the par file in the template.
And when iam creating sample Portal application it is visible in template.
Setting in the NWDS are correct. Can any one suggest what is happening here.
Regards
DV

Hi DV,
don't try to create an iView from template, but one from par. In the list you'll find your project name and within the project - voila: your portal application.
HTH,
Carsten

No xenbr while creating vm from the manager

Similar Messages

Maybe you are looking for