No zune hd 32gb in store could not use coupon.
I wanted to purchase a zune hd 32gb in store using the reward zone coupon, however it seems that none of the places in Arizona has ANY! These reward zone coupons are totally USELESS. It would've been nice if Best Buy had their buyer buy more than a handful so that Best Buy could've made some money off selling this product. Why even have reward zone coupons when by the time you get them, you can't use them and when you find time to use them they already expired! It would have been nice to get a zune hd 32gb and use this coupon.
Ah, thanks for reminding me! I remembered I had a dell coupon for $30 dollars off, checked on them and going to buy it from Dell!
Hopefully Best Buy will change their coupons so it is longer, or at least you can buy it from the store even though it's out of stock and can just pick it up when it goes through!
Similar Messages
-
When I try to create an iCloud calendar announcement / event on my PC thru Outlook, I get the message 'the set of folders could not be opened. The information store could not be opened'.
I cannot set any calendar events for my shared calendar. Can ayone help?If you upgraded to Windows 8 you may need to update the iCloud control panel for Windows to version 2.1 (see http://support.apple.com/kb/TS4463).
-
I install the iCloud Control Panel and information is uploaded from my Outlook Contact folder to iCloud. ICloud folders are created and syncing process between my iPhone, iCloud, and Outlook works for a while (day or 2). Then, when I open Outlook after a day of 2, I get the above message that "The set of folders cannot be opened. The information store could not be opened." The only resolve that I have found is to uninstall the iCloud Control Panel, the reboot my Windows computer, then reinstall the iCloud Control Panel and resync contacts and calendar to icloud. This is getting to be very cumbersome to use this feature. What is the cause of the problem that it keeps on disconnecting to iCloud?
I have also fixed it by uninstalling and then reinstalling iCloud, but as you have experienced, the problem recurs without reason. Apple would/could not help as they say that the problem is with Microsoft's Outlook and that I should talk to them. Microsoft's techies won't help without me paying some £200 as I have a Professional - a student's - version of Office 2007. This is scandalous. It is obvious, from the many who have reported the same problem n this forum, that Microsoft should look into this urgently and create a fix
-
I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened. I tried running the repair utlity to repair the iCloud however I am still getting this error message.
I tried rebooting. It didn't change anything.
-
BCDEDIT.EXE /CREATESTORE causes error the boot configuration store could not be opened
I'm upgrading XP to Windows 7 with dual boot using an image and successfully installed on 6 other computers, the last two are failing when I issue the command:
bcdedit.exe /createstore
The boot configuration data store could not be opened.
The requested system device cannot be found.
I'm using a known good WINPE 4.0 (Windows 8) x64 USB boot environment, so most solutions that state to run elevated as an administrator do not apply.
C: is NTFS active partition, chkdsk doesn't find any errors on C:
I've updated the bootsector with the command
bootsect /nt60 c: /force /mbr
this of course disables booting into XP, but I can reboot and re-enable XP via
bootsect /nt52 c: /force /mbr
If I try a modified command
bcdedit.exe /createstore c:\BOOT\BCD
this also fails, and I've verified that the hidden system C:\BOOT folder does not exist before issuing the command
If I pre-create c:\BOOT (w/o hidden or system attributes) the command
bcdedit.exe /createstore c:\BOOT\BCD
does run successfully, but the following commands to add the Windows 7 boot entries and legacy NTLDR for XP dual boot still fail!
bcdboot.exe d:\windows /s c: /v
bcdedit.exe /create {ntldr} /d "Windows XP SP3"
bcdedit.exe /set {ntldr} device partition=C:
bcdedit.exe /set {ntldr} path \ntldr
bcdedit.exe /displayorder {ntldr} /addfirst
bcdedit.exe /default {ntldr}
bcdedit.exe /timeout 5
The two failing computers are older Dell OptiPlex 960 models, so I'm using traditional BIOS boot, EFI is not supported on these models. Hard drives are regular SATA (1 per computer), no other mass storage devices present besides DVD (empty), and hard
drives are not GPT formatted. Drives are old enough that they are regular 512 sector devices (no 512 emulation or 4K issues).Thanks for your response Niki Han, the current status is the computers are booting correctly into the original XP SP3, since I've started them with my WINPE
4.0 x64 USB flash drive and issued the command to restore the original NTLDR boot process "bootsect /nt52 c: /force /mbr".
I also verified that there are no hidden partitions, and that there is only one active partition, C: which is a standard NTFS volume:
Partition 1
Type : 07
Hidden: No
Active: Yes
I've also verified that the BIOS is the same and the hard drive mode set in the BIOS is the autodetect RAID in both the working and non-working systems. I'll review the article you provided at
http://technet.microsoft.com/en-us/library/ee829686(v=ws.10).aspx#BKMK_Step4
which may allow me to get these two systems dual booting. I do know that I'll need to delete the corrupted hidden system c:\Boot folder to avoid any issues.
I do want to figure out why the command
bcdedit.exe /createstore
is outputting this error on just these two systems:
The boot configuration data store could not be opened.
The requested system device cannot be found.
What exactly does bcdedit.exe do when given the /createstore command, does it create a new empty store from the exe itself, or does it copy a store from the running system? I think the key to figure this out is understanding what the error "The
requested system device cannot be found." is trying to tell us. -
My ipad says your Apple ID has been disabled. Ready to throw this out the window. Apple store could not help. The instructions on the web are useless. Anyone found the solution?
Sorry, does this link work
http://www.apple.com/support/appleid/
I ended up having them call me then was able to give them 1 of my secret questions right and they reset things so I could reset all my secret questions.
Try going into contact support and see if you can schedule a call. There seems to be some issues with peoples' id's and this update. iTunes thought that I'd never bought anything from my computer or device before, and I clearly had, so it's like it got confused. THen I tried to get my questions reset, but the mail never came, which is why I just got a phone call because I felt it was 'real person' time. -
I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.
downloaded the updated iTunes and that did nothing. I then went through the form about $ very VERY carefully and discovered one field left blank. Once that was filled in, everything worked and I now have my free app.
-
I have created an Apple ID yesterday and I could not use App store that shows a message when I try to install something that "This Apple ID has not yet been used in the iTunes Store". What should I do?
Try this support article > Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
-
I have the new iPad and I could not use I tunes , every time I get an error says "cannot connect to itunes store " please help
Sorry, yes iTunes on your computer.
When I updated my iPad 3 and iPod Touch 4th generation to iOS 6 a few months back, I was able to update the iPad effortlessly over WiFi. but I kept getting error messages when trying to update the iPod over WiFi, so I used iTunes on my MacBook Pro.
Connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update
If you are using iTunes 11, go to View>Show Sidebar at the top - so the sidebar is visible. -
So here is the error in Outook 2013
"Cannot start Microsoft Outlook. Cannot open the Outlook window.
The information store could not be opened."
Very Very frustrating having spent three hours today reading forums, installing, reinstalling etc.
HELP?
1) I have completely un-installed and reinstalled Outlook 2013 (And also all of Office 2013)
2) Have blown away all profiles and created new ones.
3) Have blown away all Outook data files and starting from scratch
4) Have run /resetnavpane............in an attempt to rebuild the navigation pane
5) Have gone into Registry and deleted all remnants of previous Outlook installs, HKey_Local, System Current
config......Office etc.
6) I have spent hours reading online fixes/technet forums etc..............to no avail.
Please give more suggestions.
Thanks
Phil H Charlotte, NCHi,
Basically you have tried a lot but the issue still exists, now one more suggestion I can provide is to make sure Outlook is not configured to run in Compatibility Mode:
Take Windows 7 for example, in Start -> Type "Outlook" in the search box -> Right click on the "Outlook 2013" shortcut -> Click Properties -> Under Compatibility tab -> Make sure "Run this program in compatibility
mode for" is clear.
This method has resolved the issue for some users in this thread below:
http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/cannot-start-microsoft-office-outlook-error-cannot/e75265b4-044f-4d92-a078-1acbf9ae34d6
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Cannot open you default e-mail folders. The information store could not be opened?
Hi
I have a freshly installed version of windows (windows 7 ultimate x64) and when I put my credentials into Microsoft office via the Hotmail outlook connector (x64) i receive the following error message
Cannot open you default e-mail folders. The information store could not be opened
is there a way around this?What's the version of Office you are using? Is it a 64bit or 32bit edition?
Check if Outlook is in a compatibility mode:
1> Open My Computer>Local Disk C>Program Files>Microsoft Office>Office XX>Outlook.exe.
(If you are using a 64 bit machine and not using Office 64bit, go to C:\Program Files x86\Microsoft Office>Office XX>Outlook.exe)
2> Right click on Outlook.exe and click on Properties and then click onCompatibility tab. Check if you have any check mark in any of the compatibility mode options. Make sure you also click on the option "change
settings for all users" tab at the bottom of the same screen and look for similar check boxes in the window.
3> If you see any check boxes in the compatibility mode options, uncheck all the boxes and click onApply and OK.
4> Try to open outlook again.
Thanks.
Tony Chen
TechNet Community Support -
Could not use apple acct to download anything from the App Store
Could not use my apple ID to download anything from the app. Store, why? Please don't make me regret buying iPad 4, been saving for this for a long time and for what? ✋
I thought I was trying to help you. Please be aware that most replies you receive here are from fellow users like me, and most of us don't spend all our day on these forums and hence may not reply immediately. So patience is going to be helpful.
Have you tried resetting the iPad? For instructions see:
http://support.apple.com/kb/HT1430
That may fix the problem.
Regards. -
I am considering purchasing a new Mac desktop. I have, at present, a Liteon 851S ext CD/DVD write and a Maxtor 3200 USB ext hard drive. Will these work with a Mac desktop? My local Apple store could not answer my question.Happy New year to all.
Yes the Mac can read that drive but you would need to Copy the data off of it to the Mac as apposed to Move, which implies Deleting them from the drive as they were transferred from the external to the Mac. Since the Mac can Not Write to NTFS drives it can't Delete anything as that is really a Write operation, IE Making changes to the NTFS formatted drive.
Once you have that Data on Both your New Mac and you Older Windows PC you can format that drive to work on both system.
If you want to and plan on doing that post back and I'll explane how, it is simple but should be done on a Windows PC.
If you only plan on using it on the Mac from now on that is fairly simple also and is done on the Mac, Once you have the files from it stored on the Mac.
Yes you could burn those photos to DVD but that is just a waste of DVDs, you don't need to. -
Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.
Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.
Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now. -
On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
Apple Support Communities
Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
created by The hatter in Boot Camp - View the full discussion
This solved my question
This helped me
you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
This solved my question
This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
please help us by address site please please .....
<Edited by Host>hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
Maybe you are looking for
-
My Macbook Pro is running really slow and programs keep crashing
I have a 15" MacBook Pro (Mid 2010 Model) that is doing my head in, as it runs really slow most of the times as soon as I open more than one program (especially if I use Excel or Word of course). I ran the EtreCheck and the result is below, hopefully
-
All my Skype to Go Numbers Changed
Hi I have saved my skype to go numbers in my cell. Recently, I went to call one of these numbers and was told that the call would not connect (and asked for pin etc.). When i logged in to Skype I saw that all my Skype to Go numbers had changed - it l
-
Hi Friends, Is there any possible way to display custom fields created in the lookup window which opens up when clicking on the link fields?I can see only a set of default fields displayed there.In Service Request-> Product Name lookup window , I can
-
I created a viewlink between 2 view object exposing both accessors. I created a form using theese 2 Vo, going from master to deteils. When I try to use the link in the reverse order, going from detail to master, I get a SQL error, it writes the query
-
I installed the update to 10.6.7 a couple of days ago and at first noticed nothing strange at all. Last night when I went booted my MacBook I left it alone and went to do other things. Returning a couple of hours later the finder had still not launch